@@ -1023,29 +1023,6 @@ get_tmds_link_bandwidth(struct drm_connector *connector)
return 112000 * duallink_scale;
}
-enum drm_mode_status
-nouveau_conn_mode_clock_valid(const struct drm_display_mode *mode,
- const unsigned min_clock,
- const unsigned max_clock,
- unsigned int *clock_out)
-{
- unsigned int clock = mode->clock;
-
- if ((mode->flags & DRM_MODE_FLAG_3D_MASK) ==
- DRM_MODE_FLAG_3D_FRAME_PACKING)
- clock *= 2;
-
- if (clock < min_clock)
- return MODE_CLOCK_LOW;
- if (clock > max_clock)
- return MODE_CLOCK_HIGH;
-
- if (clock_out)
- *clock_out = clock;
-
- return MODE_OK;
-}
-
static enum drm_mode_status
nouveau_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
@@ -1053,7 +1030,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
- unsigned min_clock = 25000, max_clock = min_clock;
+ unsigned int min_clock = 25000, max_clock = min_clock, clock = mode->clock;
switch (nv_encoder->dcb->type) {
case DCB_OUTPUT_LVDS:
@@ -1082,8 +1059,15 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
return MODE_BAD;
}
- return nouveau_conn_mode_clock_valid(mode, min_clock, max_clock,
- NULL);
+ if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
+ clock *= 2;
+
+ if (clock < min_clock)
+ return MODE_CLOCK_LOW;
+ if (clock > max_clock)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
}
static struct drm_encoder *
@@ -232,12 +232,14 @@ nv50_dp_mode_valid(struct drm_connector *connector,
unsigned *out_clock)
{
const unsigned min_clock = 25000;
- unsigned max_clock, ds_clock, clock;
- enum drm_mode_status ret;
+ unsigned max_clock, ds_clock, clock = mode->clock;
if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace)
return MODE_NO_INTERLACE;
+ if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
+ clock *= 2;
+
max_clock = outp->dp.link_nr * outp->dp.link_bw;
ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd,
outp->dp.downstream_ports);
@@ -245,9 +247,13 @@ nv50_dp_mode_valid(struct drm_connector *connector,
max_clock = min(max_clock, ds_clock);
clock = mode->clock * (connector->display_info.bpc * 3) / 10;
- ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock,
- &clock);
+ if (clock < min_clock)
+ return MODE_CLOCK_LOW;
+ if (clock > max_clock)
+ return MODE_CLOCK_HIGH;
+
if (out_clock)
*out_clock = clock;
- return ret;
+
+ return MODE_OK;
}
Ville also pointed out that I got a lot of the logic here wrong as well, whoops. While I don't think anyone's likely using 3D output with nouveau, the next patch will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get rid of it and open-code it like before, while taking care to move the 3D frame packing calculations on the dot clock into the right place. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ --- drivers/gpu/drm/nouveau/nouveau_connector.c | 36 ++++++--------------- drivers/gpu/drm/nouveau/nouveau_dp.c | 16 ++++++--- 2 files changed, 21 insertions(+), 31 deletions(-)