| Message ID | 20200930125216.90424-5-alexandru.ardelean@analog.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: adc: at91: misc driver cleanups | expand |
On 30/09/2020 15:52:16+0300, Alexandru Ardelean wrote: > The AT91 ADC driver no longer uses the 'at91_add_device_adc' platform data > type. This is no longer used (at least in mainline drivers). s/drivers/boards/ > > This change removes the platform-data initialization from the driver, since > it is mostly dead code now. It is definitively dead code, it has been a while that board file support has been removed for the platforms with this ADC. > > Some definitions [from the platform data at91_adc.h include] have been to > be moved in the driver, since they are needed in the driver. s/to be// > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> > --- > drivers/iio/adc/at91_adc.c | 51 ++++++++++---------------- > include/linux/platform_data/at91_adc.h | 49 ------------------------- > 2 files changed, 20 insertions(+), 80 deletions(-) > delete mode 100644 include/linux/platform_data/at91_adc.h > > diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c > index 473bffe84fbd..d0e56b1b5949 100644 > --- a/drivers/iio/adc/at91_adc.c > +++ b/drivers/iio/adc/at91_adc.c > @@ -22,8 +22,6 @@ > #include <linux/slab.h> > #include <linux/wait.h> > > -#include <linux/platform_data/at91_adc.h> > - > #include <linux/iio/iio.h> > #include <linux/iio/buffer.h> > #include <linux/iio/trigger.h> > @@ -153,6 +151,25 @@ > #define TOUCH_SHTIM 0xa > #define TOUCH_SCTIM_US 10 /* 10us for the Touchscreen Switches Closure Time */ > > +enum atmel_adc_ts_type { > + ATMEL_ADC_TOUCHSCREEN_NONE = 0, > + ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, > + ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, > +}; > + > +/** > + * struct at91_adc_trigger - description of triggers > + * @name: name of the trigger advertised to the user > + * @value: value to set in the ADC's trigger setup register > + to enable the trigger > + * @is_external: Does the trigger rely on an external pin? > + */ > +struct at91_adc_trigger { > + const char *name; > + u8 value; > + bool is_external; > +}; > + > /** > * struct at91_adc_reg_desc - Various informations relative to registers > * @channel_base: Base offset for the channel data registers > @@ -957,30 +974,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev, > return ret; > } > > -static int at91_adc_probe_pdata(struct at91_adc_state *st, > - struct platform_device *pdev) > -{ > - struct at91_adc_data *pdata = pdev->dev.platform_data; > - > - if (!pdata) > - return -EINVAL; > - > - st->caps = (struct at91_adc_caps *) > - platform_get_device_id(pdev)->driver_data; > - > - st->use_external = pdata->use_external_triggers; > - st->vref_mv = pdata->vref; > - st->channels_mask = pdata->channels_used; > - st->num_channels = st->caps->num_channels; > - st->startup_time = pdata->startup_time; > - st->trigger_number = pdata->trigger_number; > - st->trigger_list = pdata->trigger_list; > - st->registers = &st->caps->registers; > - st->touchscreen_type = pdata->touchscreen_type; > - > - return 0; > -} > - > static const struct iio_info at91_adc_info = { > .read_raw = &at91_adc_read_raw, > }; > @@ -1157,11 +1150,7 @@ static int at91_adc_probe(struct platform_device *pdev) > > st = iio_priv(idev); > > - if (pdev->dev.of_node) > - ret = at91_adc_probe_dt(idev, pdev); > - else > - ret = at91_adc_probe_pdata(st, pdev); > - > + ret = at91_adc_probe_dt(idev, pdev); > if (ret) { > dev_err(&pdev->dev, "No platform data available.\n"); > return -EINVAL; You can simply do: if (ret) return ret; The debug message is not relevant anymore. You can also remove: if (!node) return -EINVAL; from at91_adc_probe_dt, there is no way the driver will probe without a DT node. > diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h > deleted file mode 100644 > index f20eaeb827ce..000000000000 > --- a/include/linux/platform_data/at91_adc.h > +++ /dev/null > @@ -1,49 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-or-later */ > -/* > - * Copyright (C) 2011 Free Electrons > - */ > - > -#ifndef _AT91_ADC_H_ > -#define _AT91_ADC_H_ > - > -enum atmel_adc_ts_type { > - ATMEL_ADC_TOUCHSCREEN_NONE = 0, > - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, > - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, > -}; > - > -/** > - * struct at91_adc_trigger - description of triggers > - * @name: name of the trigger advertised to the user > - * @value: value to set in the ADC's trigger setup register > - to enable the trigger > - * @is_external: Does the trigger rely on an external pin? > - */ > -struct at91_adc_trigger { > - const char *name; > - u8 value; > - bool is_external; > -}; > - > -/** > - * struct at91_adc_data - platform data for ADC driver > - * @channels_used: channels in use on the board as a bitmask > - * @startup_time: startup time of the ADC in microseconds > - * @trigger_list: Triggers available in the ADC > - * @trigger_number: Number of triggers available in the ADC > - * @use_external_triggers: does the board has external triggers availables > - * @vref: Reference voltage for the ADC in millivolts > - * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires) > - */ > -struct at91_adc_data { > - unsigned long channels_used; > - u8 startup_time; > - struct at91_adc_trigger *trigger_list; > - u8 trigger_number; > - bool use_external_triggers; > - u16 vref; > - enum atmel_adc_ts_type touchscreen_type; > -}; > - > -extern void __init at91_add_device_adc(struct at91_adc_data *data); > -#endif > -- > 2.17.1 >
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 473bffe84fbd..d0e56b1b5949 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -22,8 +22,6 @@ #include <linux/slab.h> #include <linux/wait.h> -#include <linux/platform_data/at91_adc.h> - #include <linux/iio/iio.h> #include <linux/iio/buffer.h> #include <linux/iio/trigger.h> @@ -153,6 +151,25 @@ #define TOUCH_SHTIM 0xa #define TOUCH_SCTIM_US 10 /* 10us for the Touchscreen Switches Closure Time */ +enum atmel_adc_ts_type { + ATMEL_ADC_TOUCHSCREEN_NONE = 0, + ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, + ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, +}; + +/** + * struct at91_adc_trigger - description of triggers + * @name: name of the trigger advertised to the user + * @value: value to set in the ADC's trigger setup register + to enable the trigger + * @is_external: Does the trigger rely on an external pin? + */ +struct at91_adc_trigger { + const char *name; + u8 value; + bool is_external; +}; + /** * struct at91_adc_reg_desc - Various informations relative to registers * @channel_base: Base offset for the channel data registers @@ -957,30 +974,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev, return ret; } -static int at91_adc_probe_pdata(struct at91_adc_state *st, - struct platform_device *pdev) -{ - struct at91_adc_data *pdata = pdev->dev.platform_data; - - if (!pdata) - return -EINVAL; - - st->caps = (struct at91_adc_caps *) - platform_get_device_id(pdev)->driver_data; - - st->use_external = pdata->use_external_triggers; - st->vref_mv = pdata->vref; - st->channels_mask = pdata->channels_used; - st->num_channels = st->caps->num_channels; - st->startup_time = pdata->startup_time; - st->trigger_number = pdata->trigger_number; - st->trigger_list = pdata->trigger_list; - st->registers = &st->caps->registers; - st->touchscreen_type = pdata->touchscreen_type; - - return 0; -} - static const struct iio_info at91_adc_info = { .read_raw = &at91_adc_read_raw, }; @@ -1157,11 +1150,7 @@ static int at91_adc_probe(struct platform_device *pdev) st = iio_priv(idev); - if (pdev->dev.of_node) - ret = at91_adc_probe_dt(idev, pdev); - else - ret = at91_adc_probe_pdata(st, pdev); - + ret = at91_adc_probe_dt(idev, pdev); if (ret) { dev_err(&pdev->dev, "No platform data available.\n"); return -EINVAL; diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h deleted file mode 100644 index f20eaeb827ce..000000000000 --- a/include/linux/platform_data/at91_adc.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2011 Free Electrons - */ - -#ifndef _AT91_ADC_H_ -#define _AT91_ADC_H_ - -enum atmel_adc_ts_type { - ATMEL_ADC_TOUCHSCREEN_NONE = 0, - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, -}; - -/** - * struct at91_adc_trigger - description of triggers - * @name: name of the trigger advertised to the user - * @value: value to set in the ADC's trigger setup register - to enable the trigger - * @is_external: Does the trigger rely on an external pin? - */ -struct at91_adc_trigger { - const char *name; - u8 value; - bool is_external; -}; - -/** - * struct at91_adc_data - platform data for ADC driver - * @channels_used: channels in use on the board as a bitmask - * @startup_time: startup time of the ADC in microseconds - * @trigger_list: Triggers available in the ADC - * @trigger_number: Number of triggers available in the ADC - * @use_external_triggers: does the board has external triggers availables - * @vref: Reference voltage for the ADC in millivolts - * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires) - */ -struct at91_adc_data { - unsigned long channels_used; - u8 startup_time; - struct at91_adc_trigger *trigger_list; - u8 trigger_number; - bool use_external_triggers; - u16 vref; - enum atmel_adc_ts_type touchscreen_type; -}; - -extern void __init at91_add_device_adc(struct at91_adc_data *data); -#endif
The AT91 ADC driver no longer uses the 'at91_add_device_adc' platform data type. This is no longer used (at least in mainline drivers). This change removes the platform-data initialization from the driver, since it is mostly dead code now. Some definitions [from the platform data at91_adc.h include] have been to be moved in the driver, since they are needed in the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> --- drivers/iio/adc/at91_adc.c | 51 ++++++++++---------------- include/linux/platform_data/at91_adc.h | 49 ------------------------- 2 files changed, 20 insertions(+), 80 deletions(-) delete mode 100644 include/linux/platform_data/at91_adc.h