@@ -2529,6 +2529,8 @@ static void crypt_dtr(struct dm_target *ti)
ti->private = NULL;
+ dm_ima_exit_measurements(ti->type);
+
if (!cc)
return;
@@ -2991,6 +2993,213 @@ static int crypt_report_zones(struct dm_target *ti,
#endif
+#ifdef CONFIG_IMA
+/*
+ * append integer values to dm-crypt specific data
+ * to be measured through IMA
+ */
+static int ima_append_num_values(struct dm_target *ti,
+ const char *key,
+ long long num_val)
+{
+ char *num_str = NULL;
+ int length = 0;
+ int r = 0;
+
+ if (!ti || !key) {
+ r = -EINVAL;
+ goto error;
+ }
+
+ length = snprintf(NULL, 0, "%lld", num_val);
+ num_str = kzalloc(length + 1, GFP_KERNEL);
+ if (!num_str) {
+ r = -ENOMEM;
+ goto error;
+ }
+ snprintf(num_str, length + 1, "%lld", num_val);
+ dm_ima_append_measurement_list(ti->type,
+ key,
+ (const void *)num_str,
+ length);
+
+error:
+ if (r < 0)
+ DMERR("appending num values to IMA measurement list failed %d", r);
+ kzfree(num_str);
+ return r;
+}
+/*
+ * Measure dm-crypt specific data through IMA.
+ * It appends all the needed data to the list as a key-val pair using
+ * dm_ima_append_measurement_list() and internal ima_append_num_values(),
+ * and finally measures the list using dm_ima_finalize_and_measure().
+ */
+static void ima_measure_dm_crypt_data(struct dm_target *ti, const char *desc)
+{
+ char *str_base_dev_name = NULL;
+ char *str_target_dev_name = NULL;
+ const char *str_target_dev_maj_min = NULL;
+ struct crypt_config *cc = NULL;
+ int r = 0;
+
+ if (!ti) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ str_target_dev_maj_min = dm_table_device_name(ti->table);
+ if (!str_target_dev_maj_min) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ cc = ti->private;
+
+ r = get_devname_from_maj_min(cc->dev->name, &str_base_dev_name);
+ if (r || !str_base_dev_name) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ dm_ima_append_measurement_list(ti->type,
+ "base_device_name",
+ (const void *)str_base_dev_name,
+ strlen(str_base_dev_name));
+
+
+ dm_ima_append_measurement_list(ti->type,
+ "base_device_major_minor",
+ (const void *)cc->dev->name,
+ strlen(cc->dev->name));
+
+ r = get_devname_from_maj_min(str_target_dev_maj_min,
+ &str_target_dev_name);
+ if (r || !str_target_dev_name) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ dm_ima_append_measurement_list(ti->type,
+ "target_device_name",
+ (const void *)str_target_dev_name,
+ strlen(str_target_dev_name));
+
+ dm_ima_append_measurement_list(ti->type,
+ "target_device_major_minor",
+ (const void *)str_target_dev_maj_min,
+ strlen(str_target_dev_maj_min));
+
+ if (cc->cipher_string) {
+ dm_ima_append_measurement_list(ti->type,
+ "cipher_string",
+ (const void *)cc->cipher_string,
+ strlen(cc->cipher_string));
+ }
+
+ if (cc->cipher_auth) {
+ dm_ima_append_measurement_list(ti->type,
+ "cipher_auth",
+ (const void *)cc->cipher_auth,
+ strlen(cc->cipher_auth));
+ }
+
+ r = ima_append_num_values(ti, "target_begin", ti->begin);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "target_length", ti->len);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "key_size", cc->key_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "key_parts", cc->key_parts);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "key_extra_size", cc->key_extra_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "key_mac_size", cc->key_mac_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "cc_start", cc->start);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "cipher_flags", cc->cipher_flags);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "flags", cc->flags);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "sector_size", cc->sector_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "sector_shift", cc->sector_shift);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "iv_offset", cc->iv_offset);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "iv_size", cc->iv_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "integrity_tag_size", cc->integrity_tag_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "integrity_iv_size", cc->integrity_iv_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "on_disk_tag_size", cc->on_disk_tag_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "tfms_count", cc->tfms_count);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "dmreq_start", cc->dmreq_start);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "per_bio_data_size", cc->per_bio_data_size);
+ if (r)
+ goto out;
+
+ r = ima_append_num_values(ti, "ti_num_discard_bios",
+ ti->num_discard_bios);
+ if (r)
+ goto out;
+
+ dm_ima_finalize_and_measure(ti->type, desc, false);
+
+out:
+ if (r)
+ DMERR("IMA measurement of dm-crypt data failed %d", r);
+
+ kzfree(str_base_dev_name);
+ kzfree(str_target_dev_name);
+}
+#else
+static inline void ima_measure_dm_crypt_data(struct dm_target *ti,
+ const char *desc) {}
+#endif /* CONFIG_IMA */
+
+
/*
* Construct an encryption mapping:
* <cipher> [<key>|:<key_size>:<user|logon>:<key_description>] <iv_offset> <dev_path> <start>
@@ -3186,6 +3395,10 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
ti->num_flush_bios = 1;
+ dm_ima_init_measurements(ti->type);
+
+ ima_measure_dm_crypt_data(ti, "add_target");
+
return 0;
bad:
@@ -3324,6 +3537,8 @@ static void crypt_postsuspend(struct dm_target *ti)
struct crypt_config *cc = ti->private;
set_bit(DM_CRYPT_SUSPENDED, &cc->flags);
+
+ ima_measure_dm_crypt_data(ti, "post_suspend");
}
static int crypt_preresume(struct dm_target *ti)
@@ -3343,6 +3558,8 @@ static void crypt_resume(struct dm_target *ti)
struct crypt_config *cc = ti->private;
clear_bit(DM_CRYPT_SUSPENDED, &cc->flags);
+
+ ima_measure_dm_crypt_data(ti, "resume");
}
/* Message interface
@@ -230,6 +230,7 @@ struct modsig;
#define __ima_supported_kernel_data_sources(source) \
source(MIN_SOURCE, min_source) \
+ source(DM_CRYPT, dm-crypt) \
source(MAX_SOURCE, max_source)
#define __ima_enum_stringify(ENUM, str) (#str),
@@ -36,7 +36,8 @@ static bool timer_expired;
static inline bool ima_queuing_enabled(void)
{
if ((IS_ENABLED(CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS) &&
- IS_ENABLED(CONFIG_SYSTEM_TRUSTED_KEYRING)))
+ IS_ENABLED(CONFIG_SYSTEM_TRUSTED_KEYRING)) ||
+ IS_ENABLED(CONFIG_DM_CRYPT))
return true;
return false;
Currently, dm-crypt does not take advantage of IMA measuring capabilities, and ultimately the benefits of remote attestation. Measure various dm-crypt constructs by calling various device-mapper functions - dm_ima_*() that use IMA measuring capabilities. Implement ima_measure_dm_crypt_data() to measure various dm-crypt constructs. Ensure that ima_measure_dm_crypt_data() is non intrusive, i.e. failures in this function and the call-stack below should not affect the core functionality of dm-crypt. Register dm-crypt as supported data source for IMA measurement in ima.h. A demonstrative usage of above functionality on a system: If the IMA policy contains the following rule: measure func=CRITICAL_DATA data_sources=dm-crypt template=ima-buf and, the following commands are used to setup a crypt target: #key="faf453b4ee938cff2f0d2c869a0b743f59125c0a37f5bcd8f1dbbd911a78abaa" #arg="'0 1953125 crypt aes-xts-plain64 " #arg="$arg $key 0 " #arg="$arg /dev/loop0 0 1 allow_discards'" #tgt_name="test-crypt" #cmd="dmsetup create $tgt_name --table $arg" #eval $cmd then, the IMA log at /sys/kernel/security/integrity/ima/ascii_runtime_measurements should contain the dm-crypt measurements. And, the following IMA log entry should be added in the IMA log, ima-buf sha1:f418b90557619b42ade6b51476170e5f1a631a31 1603056402:556677963:dm-crypt:add_target 74695f6e756d5f646973636172645f62696f733d313b7065725f62696f5f646 174615f73697a653d3834383b646d7265715f73746172743d3136383b74666d 735f636f756e743d313b6f6e5f6469736b5f7461675f73697a653d303b696e7 46567726974795f69765f73697a653d303b696e746567726974795f7461675f 73697a653d303b69765f73697a653d31363b69765f6f66667365743d303b736 563746f725f73686966743d303b736563746f725f73697a653d3531323b666c 6167733d323b6369706865725f666c6167733d303b63635f73746172743d303 b6b65795f6d61635f73697a653d303b6b65795f65787472615f73697a653d30 3b6b65795f70617274733d313b6b65795f73697a653d33323b7461726765745 f6c656e6774683d313935333132353b7461726765745f626567696e3d303b63 69706865725f737472696e673d6165732d7874732d706c61696e36343b74617 26765745f6465766963655f6d616a6f725f6d696e6f723d3235333a313b7461 726765745f6465766963655f6e616d653d646d2d313b626173655f646576696 3655f6d616a6f725f6d696e6f723d373a303b626173655f6465766963655f6e 616d653d6c6f6f70303b where, the ascii representation of the above data is: ti_num_discard_bios=1;per_bio_data_size=848;dmreq_start=168; tfms_count=1;on_disk_tag_size=0;integrity_iv_size=0; integrity_tag_size=0;iv_size=16;iv_offset=0;sector_shift=0; sector_size=512;flags=2;cipher_flags=0;cc_start=0;key_mac_size=0; key_extra_size=0;key_parts=1;key_size=32;target_length=1953125; target_begin=0;cipher_string=aes-xts-plain64; target_device_major_minor=253:1;target_device_name=dm-1; base_device_major_minor=7:0;base_device_name=loop0; Some of the above values can be verified using: #dmsetup table --showkeys where, the output of the command should be similar to: test-crypt: 0 1953125 crypt aes-xts-plain64 faf453b4ee938cff2f0d2c869a0b743f59125c0a37f5bcd8f1dbbd911a78abaa 0 7:0 0 1 allow_discards Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> --- drivers/md/dm-crypt.c | 217 ++++++++++++++++++++++++ security/integrity/ima/ima.h | 1 + security/integrity/ima/ima_queue_data.c | 3 +- 3 files changed, 220 insertions(+), 1 deletion(-)