[v6,01/11] drivers: usb: otg: add a new driver for omap usb2 phy
diff mbox

Message ID 1343639400-28725-2-git-send-email-kishon@ti.com
State New, archived
Headers show

Commit Message

Kishon Vijay Abraham I July 30, 2012, 9:09 a.m. UTC
All phy related programming like enabling/disabling the clocks, powering
on/off the phy is taken care of by this driver. It is also used for OTG
related functionality like srp.

This also includes device tree support for usb2 phy driver and
the documentation with device tree binding information is updated.

Currently writing to control module register is taken care in this
driver which will be removed once the control module driver is in place.

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/bus/omap-ocp2scp.txt       |    3 +
 Documentation/devicetree/bindings/usb/omap-usb.txt |   17 ++
 drivers/usb/otg/Kconfig                            |   10 +
 drivers/usb/otg/Makefile                           |    1 +
 drivers/usb/otg/omap-usb2.c                        |  280 ++++++++++++++++++++
 include/linux/usb/omap_usb.h                       |   45 ++++
 include/linux/usb/phy_companion.h                  |   34 +++
 7 files changed, 390 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/omap-usb.txt
 create mode 100644 drivers/usb/otg/omap-usb2.c
 create mode 100644 include/linux/usb/omap_usb.h
 create mode 100644 include/linux/usb/phy_companion.h

Comments

Shubhrajyoti Datta July 30, 2012, 9:37 a.m. UTC | #1
On Monday 30 July 2012 02:39 PM, Kishon Vijay Abraham I wrote:
> +			writel(~PHY_PD, phy->control_dev);
> +			/* XXX: add proper documentation for this delay */
> +			mdelay(200);
Do you need this to be busy?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I July 30, 2012, 9:46 a.m. UTC | #2
Hi,

On Mon, Jul 30, 2012 at 3:07 PM, Shubhrajyoti <shubhrajyoti@ti.com> wrote:
> On Monday 30 July 2012 02:39 PM, Kishon Vijay Abraham I wrote:
>> +                     writel(~PHY_PD, phy->control_dev);
>> +                     /* XXX: add proper documentation for this delay */
>> +                     mdelay(200);
> Do you need this to be busy?
This might be called from interrupt context. This delay was initially
added in omap_phy_internal.c and I just inherited it.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Shubhrajyoti Datta July 30, 2012, 10:04 a.m. UTC | #3
On Monday 30 July 2012 03:16 PM, ABRAHAM, KISHON VIJAY wrote:
> Hi,
>
> On Mon, Jul 30, 2012 at 3:07 PM, Shubhrajyoti <shubhrajyoti@ti.com> wrote:
>> On Monday 30 July 2012 02:39 PM, Kishon Vijay Abraham I wrote:
>>> +                     writel(~PHY_PD, phy->control_dev);
>>> +                     /* XXX: add proper documentation for this delay */
>>> +                     mdelay(200);
>> Do you need this to be busy?
> This might be called from interrupt context. This delay was initially
> added in omap_phy_internal.c and I just inherited it.
Thanks for the explanation.

> Thanks
> Kishon

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Felipe Balbi Aug. 3, 2012, 1:27 p.m. UTC | #4
On Mon, Jul 30, 2012 at 02:39:50PM +0530, Kishon Vijay Abraham I wrote:
> All phy related programming like enabling/disabling the clocks, powering
> on/off the phy is taken care of by this driver. It is also used for OTG
> related functionality like srp.
> 
> This also includes device tree support for usb2 phy driver and
> the documentation with device tree binding information is updated.
> 
> Currently writing to control module register is taken care in this
> driver which will be removed once the control module driver is in place.
> 
> Cc: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../devicetree/bindings/bus/omap-ocp2scp.txt       |    3 +
>  Documentation/devicetree/bindings/usb/omap-usb.txt |   17 ++
>  drivers/usb/otg/Kconfig                            |   10 +
>  drivers/usb/otg/Makefile                           |    1 +
>  drivers/usb/otg/omap-usb2.c                        |  280 ++++++++++++++++++++

let's move this to drivers/usb/phy/. I'll prepare a patch moving all phy
drivers to that directory after the OTG state machine is ready ;-)

> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
> new file mode 100644
> index 0000000..52f503b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
> @@ -0,0 +1,17 @@
> +OMAP USB PHY
> +
> +OMAP USB2 PHY
> +
> +Required properties:
> + - compatible: Should be "ti,omap-usb2"
> + - reg : Address and length of the register set for the device. Also
> +add the address of control module dev conf register until a driver for
> +control module is added
> +
> +This is usually a subnode of ocp2scp to which it is connected.
> +
> +usb2phy@4a0ad080 {
> +	compatible = "ti,omap-usb2";
> +	reg = <0x4a0ad080 0x58>,
> +		<0x4a002300 0x1>;
> +};
> diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
> index 5c87db0..c751db7 100644
> --- a/drivers/usb/otg/Kconfig
> +++ b/drivers/usb/otg/Kconfig
> @@ -78,6 +78,16 @@ config TWL6030_USB
>  	  are hooked to this driver through platform_data structure.
>  	  The definition of internal PHY APIs are in the mach-omap2 layer.
>  
> +config OMAP_USB2
> +	tristate "OMAP USB2 PHY Driver"
> +	depends on OMAP_OCP2SCP
> +	select USB_OTG_UTILS
> +	help
> +	  Enable this to support the transceiver that is part of SOC. This
> +	  driver takes care of all the PHY functionality apart from comparator.
> +	  The USB OTG controller communicates with the comparator using this
> +	  driver.
> +
>  config NOP_USB_XCEIV
>  	tristate "NOP USB Transceiver Driver"
>  	select USB_OTG_UTILS
> diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
> index 41aa509..2c2a3ca 100644
> --- a/drivers/usb/otg/Makefile
> +++ b/drivers/usb/otg/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
>  obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
>  obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
>  obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
> +obj-$(CONFIG_OMAP_USB2)		+= omap-usb2.o
>  obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
>  obj-$(CONFIG_USB_ULPI)		+= ulpi.o
>  obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o
> diff --git a/drivers/usb/otg/omap-usb2.c b/drivers/usb/otg/omap-usb2.c
> new file mode 100644
> index 0000000..026cb3c
> --- /dev/null
> +++ b/drivers/usb/otg/omap-usb2.c
> @@ -0,0 +1,280 @@
> +/*
> + * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/usb/omap_usb.h>
> +#include <linux/usb/phy_companion.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/delay.h>
> +
> +/**
> + * omap_usb2_set_comparator - links the comparator present in the sytem with
> + *	this phy
> + * @comparator - the companion phy(comparator) for this phy
> + *
> + * The phy companion driver should call this API passing the phy_companion
> + * filled with set_vbus and start_srp to be used by usb phy.
> + *
> + * For use by phy companion driver
> + */
> +void omap_usb2_set_comparator(struct phy_companion *comparator)
> +{
> +	struct omap_usb	*phy;
> +	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
> +
> +	if (x) {
> +		phy = phy_to_omapusb(x);
> +		phy->comparator = comparator;
> +	}
> +}
> +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
> +
> +/**
> + * omap_usb_phy_power - power on/off the phy using control module reg
> + * @phy: struct omap_usb *
> + * @on: 0 or 1, based on powering on or off the PHY
> + *
> + * XXX: Remove this function once control module driver gets merged
> + */
> +static void omap_usb_phy_power(struct omap_usb *phy, int on)
> +{
> +	u32 val;
> +
> +	if (on) {
> +		val = readl(phy->control_dev);
> +		if (val & PHY_PD) {
> +			writel(~PHY_PD, phy->control_dev);
> +			/* XXX: add proper documentation for this delay */
> +			mdelay(200);
> +		}
> +	} else {
> +		writel(PHY_PD, phy->control_dev);
> +	}
> +}
> +
> +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
> +{
> +	struct omap_usb *phy = phy_to_omapusb(otg->phy);
> +
> +	if (!phy->comparator)
> +		return -ENODEV;
> +
> +	return phy->comparator->set_vbus(phy->comparator, enabled);
> +}
> +
> +static int omap_usb_start_srp(struct usb_otg *otg)
> +{
> +	struct omap_usb *phy = phy_to_omapusb(otg->phy);
> +
> +	if (!phy->comparator)
> +		return -ENODEV;
> +
> +	return phy->comparator->start_srp(phy->comparator);
> +}
> +
> +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
> +{
> +	struct usb_phy	*phy = otg->phy;
> +
> +	otg->host = host;
> +	if (!host)
> +		phy->state = OTG_STATE_UNDEFINED;
> +
> +	return 0;
> +}
> +
> +static int omap_usb_set_peripheral(struct usb_otg *otg,
> +		struct usb_gadget *gadget)
> +{
> +	struct usb_phy	*phy = otg->phy;
> +
> +	otg->gadget = gadget;
> +	if (!gadget)
> +		phy->state = OTG_STATE_UNDEFINED;
> +
> +	return 0;
> +}
> +
> +static int omap_usb2_suspend(struct usb_phy *x, int suspend)
> +{
> +	u32 ret;
> +	struct omap_usb *phy = phy_to_omapusb(x);
> +
> +	if (suspend && !phy->is_suspended) {
> +		omap_usb_phy_power(phy, 0);
> +		pm_runtime_put_sync(phy->dev);
> +		phy->is_suspended = 1;
> +	} else if (!suspend && phy->is_suspended) {
> +		ret = pm_runtime_get_sync(phy->dev);
> +		if (ret < 0) {
> +			dev_err(phy->dev, "get_sync failed with err %d\n",
> +									ret);
> +			return ret;
> +		}
> +		omap_usb_phy_power(phy, 1);
> +		phy->is_suspended = 0;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __devinit omap_usb2_probe(struct platform_device *pdev)
> +{
> +	struct omap_usb			*phy;
> +	struct usb_otg			*otg;
> +	struct resource			*res;
> +
> +	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy) {
> +		dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
> +		return -ENOMEM;
> +	}
> +
> +	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> +	if (!otg) {
> +		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
> +		return -ENOMEM;
> +	}
> +
> +	phy->dev		= &pdev->dev;
> +
> +	phy->phy.dev		= phy->dev;
> +	phy->phy.label		= "omap-usb2";
> +	phy->phy.set_suspend	= omap_usb2_suspend;
> +	phy->phy.otg		= otg;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +
> +	phy->control_dev = devm_request_and_ioremap(&pdev->dev, res);
> +	if (phy->control_dev == NULL) {
> +		dev_err(&pdev->dev, "Failed to obtain io memory\n");
> +		return -ENXIO;
> +	}
> +
> +	phy->is_suspended	= 1;
> +	omap_usb_phy_power(phy, 0);
> +
> +	otg->set_host		= omap_usb_set_host;
> +	otg->set_peripheral	= omap_usb_set_peripheral;
> +	otg->set_vbus		= omap_usb_set_vbus;
> +	otg->start_srp		= omap_usb_start_srp;
> +	otg->phy		= &phy->phy;
> +
> +	phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
> +	if (IS_ERR(phy->wkupclk)) {
> +		dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
> +		return PTR_ERR(phy->wkupclk);
> +	}
> +	clk_prepare(phy->wkupclk);
> +
> +	usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
> +
> +	platform_set_drvdata(pdev, phy);
> +
> +	pm_runtime_enable(phy->dev);
> +
> +	return 0;
> +}
> +
> +static int __devexit omap_usb2_remove(struct platform_device *pdev)
> +{
> +	struct omap_usb	*phy = platform_get_drvdata(pdev);
> +
> +	clk_unprepare(phy->wkupclk);
> +	usb_remove_phy(&phy->phy);
> +	platform_set_drvdata(pdev, NULL);

this platform_set_drvdata() is unnecessary as the pdev object will be
destroyed.

> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_RUNTIME
> +
> +static int omap_usb2_runtime_suspend(struct device *dev)
> +{
> +	struct platform_device	*pdev = to_platform_device(dev);
> +	struct omap_usb	*phy = platform_get_drvdata(pdev);
> +
> +	clk_disable(phy->wkupclk);

weird. I would expect the wakeup clock to be enabled on suspend and
disabled on resume. Isn't this causing any unbalanced disable warnings ?

> +
> +	return 0;
> +}
> +
> +static int omap_usb2_runtime_resume(struct device *dev)
> +{
> +	u32 ret = 0;
> +	struct platform_device	*pdev = to_platform_device(dev);
> +	struct omap_usb	*phy = platform_get_drvdata(pdev);
> +
> +	ret = clk_enable(phy->wkupclk);
> +	if (ret < 0)
> +		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops omap_usb2_pm_ops = {
> +	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
> +		NULL)

only runtime ? What about static suspend ? We need this to work also
after a traditional echo mem > /sys/power/state ;-)

> +#ifdef CONFIG_OF
> +static const struct of_device_id omap_usb2_id_table[] = {
> +	{ .compatible = "ti,omap-usb2" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
> +#endif
> +
> +static struct platform_driver omap_usb2_driver = {
> +	.probe		= omap_usb2_probe,
> +	.remove		= __devexit_p(omap_usb2_remove),
> +	.driver		= {
> +		.name	= "omap-usb2",
> +		.owner	= THIS_MODULE,
> +		.pm	= DEV_PM_OPS,
> +		.of_match_table = of_match_ptr(omap_usb2_id_table),
> +	},
> +};
> +
> +static int __init usb2_omap_init(void)
> +{
> +	return platform_driver_register(&omap_usb2_driver);
> +}
> +arch_initcall(usb2_omap_init);

I'd really like to see this converted into a module_platform_driver().
If you have dependencies, just make sure to return -EPROBE_DEFER so your
probe gets retried.
Kishon Vijay Abraham I Aug. 3, 2012, 2:31 p.m. UTC | #5
Hi,

On Fri, Aug 3, 2012 at 6:57 PM, Felipe Balbi <balbi@ti.com> wrote:
> On Mon, Jul 30, 2012 at 02:39:50PM +0530, Kishon Vijay Abraham I wrote:
>> All phy related programming like enabling/disabling the clocks, powering
>> on/off the phy is taken care of by this driver. It is also used for OTG
>> related functionality like srp.
>>
>> This also includes device tree support for usb2 phy driver and
>> the documentation with device tree binding information is updated.
>>
>> Currently writing to control module register is taken care in this
>> driver which will be removed once the control module driver is in place.
>>
>> Cc: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../devicetree/bindings/bus/omap-ocp2scp.txt       |    3 +
>>  Documentation/devicetree/bindings/usb/omap-usb.txt |   17 ++
>>  drivers/usb/otg/Kconfig                            |   10 +
>>  drivers/usb/otg/Makefile                           |    1 +
>>  drivers/usb/otg/omap-usb2.c                        |  280 ++++++++++++++++++++
>
> let's move this to drivers/usb/phy/. I'll prepare a patch moving all phy
> drivers to that directory after the OTG state machine is ready ;-)

Ok.
>
>> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
>> new file mode 100644
>> index 0000000..52f503b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
>> @@ -0,0 +1,17 @@
>> +OMAP USB PHY
>> +
>> +OMAP USB2 PHY
>> +
>> +Required properties:
>> + - compatible: Should be "ti,omap-usb2"
>> + - reg : Address and length of the register set for the device. Also
>> +add the address of control module dev conf register until a driver for
>> +control module is added
>> +
>> +This is usually a subnode of ocp2scp to which it is connected.
>> +
>> +usb2phy@4a0ad080 {
>> +     compatible = "ti,omap-usb2";
>> +     reg = <0x4a0ad080 0x58>,
>> +             <0x4a002300 0x1>;
>> +};
>> diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
>> index 5c87db0..c751db7 100644
>> --- a/drivers/usb/otg/Kconfig
>> +++ b/drivers/usb/otg/Kconfig
>> @@ -78,6 +78,16 @@ config TWL6030_USB
>>         are hooked to this driver through platform_data structure.
>>         The definition of internal PHY APIs are in the mach-omap2 layer.
>>
>> +config OMAP_USB2
>> +     tristate "OMAP USB2 PHY Driver"
>> +     depends on OMAP_OCP2SCP
>> +     select USB_OTG_UTILS
>> +     help
>> +       Enable this to support the transceiver that is part of SOC. This
>> +       driver takes care of all the PHY functionality apart from comparator.
>> +       The USB OTG controller communicates with the comparator using this
>> +       driver.
>> +
>>  config NOP_USB_XCEIV
>>       tristate "NOP USB Transceiver Driver"
>>       select USB_OTG_UTILS
>> diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
>> index 41aa509..2c2a3ca 100644
>> --- a/drivers/usb/otg/Makefile
>> +++ b/drivers/usb/otg/Makefile
>> @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
>>  obj-$(CONFIG_ISP1301_OMAP)   += isp1301_omap.o
>>  obj-$(CONFIG_TWL4030_USB)    += twl4030-usb.o
>>  obj-$(CONFIG_TWL6030_USB)    += twl6030-usb.o
>> +obj-$(CONFIG_OMAP_USB2)              += omap-usb2.o
>>  obj-$(CONFIG_NOP_USB_XCEIV)  += nop-usb-xceiv.o
>>  obj-$(CONFIG_USB_ULPI)               += ulpi.o
>>  obj-$(CONFIG_USB_ULPI_VIEWPORT)      += ulpi_viewport.o
>> diff --git a/drivers/usb/otg/omap-usb2.c b/drivers/usb/otg/omap-usb2.c
>> new file mode 100644
>> index 0000000..026cb3c
>> --- /dev/null
>> +++ b/drivers/usb/otg/omap-usb2.c
>> @@ -0,0 +1,280 @@
>> +/*
>> + * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
>> + *
>> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/io.h>
>> +#include <linux/usb/omap_usb.h>
>> +#include <linux/usb/phy_companion.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/delay.h>
>> +
>> +/**
>> + * omap_usb2_set_comparator - links the comparator present in the sytem with
>> + *   this phy
>> + * @comparator - the companion phy(comparator) for this phy
>> + *
>> + * The phy companion driver should call this API passing the phy_companion
>> + * filled with set_vbus and start_srp to be used by usb phy.
>> + *
>> + * For use by phy companion driver
>> + */
>> +void omap_usb2_set_comparator(struct phy_companion *comparator)
>> +{
>> +     struct omap_usb *phy;
>> +     struct usb_phy  *x = usb_get_phy(USB_PHY_TYPE_USB2);
>> +
>> +     if (x) {
>> +             phy = phy_to_omapusb(x);
>> +             phy->comparator = comparator;
>> +     }
>> +}
>> +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
>> +
>> +/**
>> + * omap_usb_phy_power - power on/off the phy using control module reg
>> + * @phy: struct omap_usb *
>> + * @on: 0 or 1, based on powering on or off the PHY
>> + *
>> + * XXX: Remove this function once control module driver gets merged
>> + */
>> +static void omap_usb_phy_power(struct omap_usb *phy, int on)
>> +{
>> +     u32 val;
>> +
>> +     if (on) {
>> +             val = readl(phy->control_dev);
>> +             if (val & PHY_PD) {
>> +                     writel(~PHY_PD, phy->control_dev);
>> +                     /* XXX: add proper documentation for this delay */
>> +                     mdelay(200);
>> +             }
>> +     } else {
>> +             writel(PHY_PD, phy->control_dev);
>> +     }
>> +}
>> +
>> +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
>> +{
>> +     struct omap_usb *phy = phy_to_omapusb(otg->phy);
>> +
>> +     if (!phy->comparator)
>> +             return -ENODEV;
>> +
>> +     return phy->comparator->set_vbus(phy->comparator, enabled);
>> +}
>> +
>> +static int omap_usb_start_srp(struct usb_otg *otg)
>> +{
>> +     struct omap_usb *phy = phy_to_omapusb(otg->phy);
>> +
>> +     if (!phy->comparator)
>> +             return -ENODEV;
>> +
>> +     return phy->comparator->start_srp(phy->comparator);
>> +}
>> +
>> +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
>> +{
>> +     struct usb_phy  *phy = otg->phy;
>> +
>> +     otg->host = host;
>> +     if (!host)
>> +             phy->state = OTG_STATE_UNDEFINED;
>> +
>> +     return 0;
>> +}
>> +
>> +static int omap_usb_set_peripheral(struct usb_otg *otg,
>> +             struct usb_gadget *gadget)
>> +{
>> +     struct usb_phy  *phy = otg->phy;
>> +
>> +     otg->gadget = gadget;
>> +     if (!gadget)
>> +             phy->state = OTG_STATE_UNDEFINED;
>> +
>> +     return 0;
>> +}
>> +
>> +static int omap_usb2_suspend(struct usb_phy *x, int suspend)
>> +{
>> +     u32 ret;
>> +     struct omap_usb *phy = phy_to_omapusb(x);
>> +
>> +     if (suspend && !phy->is_suspended) {
>> +             omap_usb_phy_power(phy, 0);
>> +             pm_runtime_put_sync(phy->dev);
>> +             phy->is_suspended = 1;
>> +     } else if (!suspend && phy->is_suspended) {
>> +             ret = pm_runtime_get_sync(phy->dev);
>> +             if (ret < 0) {
>> +                     dev_err(phy->dev, "get_sync failed with err %d\n",
>> +                                                                     ret);
>> +                     return ret;
>> +             }
>> +             omap_usb_phy_power(phy, 1);
>> +             phy->is_suspended = 0;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int __devinit omap_usb2_probe(struct platform_device *pdev)
>> +{
>> +     struct omap_usb                 *phy;
>> +     struct usb_otg                  *otg;
>> +     struct resource                 *res;
>> +
>> +     phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
>> +     if (!phy) {
>> +             dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
>> +             return -ENOMEM;
>> +     }
>> +
>> +     otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
>> +     if (!otg) {
>> +             dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
>> +             return -ENOMEM;
>> +     }
>> +
>> +     phy->dev                = &pdev->dev;
>> +
>> +     phy->phy.dev            = phy->dev;
>> +     phy->phy.label          = "omap-usb2";
>> +     phy->phy.set_suspend    = omap_usb2_suspend;
>> +     phy->phy.otg            = otg;
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> +
>> +     phy->control_dev = devm_request_and_ioremap(&pdev->dev, res);
>> +     if (phy->control_dev == NULL) {
>> +             dev_err(&pdev->dev, "Failed to obtain io memory\n");
>> +             return -ENXIO;
>> +     }
>> +
>> +     phy->is_suspended       = 1;
>> +     omap_usb_phy_power(phy, 0);
>> +
>> +     otg->set_host           = omap_usb_set_host;
>> +     otg->set_peripheral     = omap_usb_set_peripheral;
>> +     otg->set_vbus           = omap_usb_set_vbus;
>> +     otg->start_srp          = omap_usb_start_srp;
>> +     otg->phy                = &phy->phy;
>> +
>> +     phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
>> +     if (IS_ERR(phy->wkupclk)) {
>> +             dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
>> +             return PTR_ERR(phy->wkupclk);
>> +     }
>> +     clk_prepare(phy->wkupclk);
>> +
>> +     usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
>> +
>> +     platform_set_drvdata(pdev, phy);
>> +
>> +     pm_runtime_enable(phy->dev);
>> +
>> +     return 0;
>> +}
>> +
>> +static int __devexit omap_usb2_remove(struct platform_device *pdev)
>> +{
>> +     struct omap_usb *phy = platform_get_drvdata(pdev);
>> +
>> +     clk_unprepare(phy->wkupclk);
>> +     usb_remove_phy(&phy->phy);
>> +     platform_set_drvdata(pdev, NULL);
>
> this platform_set_drvdata() is unnecessary as the pdev object will be
> destroyed.

Fine. Will remove it.
>
>> +     return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_RUNTIME
>> +
>> +static int omap_usb2_runtime_suspend(struct device *dev)
>> +{
>> +     struct platform_device  *pdev = to_platform_device(dev);
>> +     struct omap_usb *phy = platform_get_drvdata(pdev);
>> +
>> +     clk_disable(phy->wkupclk);
>
> weird. I would expect the wakeup clock to be enabled on suspend and
> disabled on resume. Isn't this causing any unbalanced disable warnings ?

Even I was expecting the wakeup clock to be enabled on suspend but if
we have this enabled coreaon domain is never
gated and core does not hit low power state. btw Why do think this is
unbalanced?
>
>> +
>> +     return 0;
>> +}
>> +
>> +static int omap_usb2_runtime_resume(struct device *dev)
>> +{
>> +     u32 ret = 0;
>> +     struct platform_device  *pdev = to_platform_device(dev);
>> +     struct omap_usb *phy = platform_get_drvdata(pdev);
>> +
>> +     ret = clk_enable(phy->wkupclk);
>> +     if (ret < 0)
>> +             dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
>> +
>> +     return ret;
>> +}
>> +
>> +static const struct dev_pm_ops omap_usb2_pm_ops = {
>> +     SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
>> +             NULL)
>
> only runtime ? What about static suspend ? We need this to work also
> after a traditional echo mem > /sys/power/state ;-)

The static suspend case is handled by users of this phy using set_suspend hooks.
>
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id omap_usb2_id_table[] = {
>> +     { .compatible = "ti,omap-usb2" },
>> +     {}
>> +};
>> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
>> +#endif
>> +
>> +static struct platform_driver omap_usb2_driver = {
>> +     .probe          = omap_usb2_probe,
>> +     .remove         = __devexit_p(omap_usb2_remove),
>> +     .driver         = {
>> +             .name   = "omap-usb2",
>> +             .owner  = THIS_MODULE,
>> +             .pm     = DEV_PM_OPS,
>> +             .of_match_table = of_match_ptr(omap_usb2_id_table),
>> +     },
>> +};
>> +
>> +static int __init usb2_omap_init(void)
>> +{
>> +     return platform_driver_register(&omap_usb2_driver);
>> +}
>> +arch_initcall(usb2_omap_init);
>
> I'd really like to see this converted into a module_platform_driver().
> If you have dependencies, just make sure to return -EPROBE_DEFER so your
> probe gets retried.

Sure.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Felipe Balbi Aug. 6, 2012, 8:49 a.m. UTC | #6
Hi,

On Fri, Aug 03, 2012 at 08:01:44PM +0530, ABRAHAM, KISHON VIJAY wrote:
> >> +     return 0;
> >> +}
> >> +
> >> +#ifdef CONFIG_PM_RUNTIME
> >> +
> >> +static int omap_usb2_runtime_suspend(struct device *dev)
> >> +{
> >> +     struct platform_device  *pdev = to_platform_device(dev);
> >> +     struct omap_usb *phy = platform_get_drvdata(pdev);
> >> +
> >> +     clk_disable(phy->wkupclk);
> >
> > weird. I would expect the wakeup clock to be enabled on suspend and
> > disabled on resume. Isn't this causing any unbalanced disable warnings ?
> 
> Even I was expecting the wakeup clock to be enabled on suspend but if
> we have this enabled coreaon domain is never
> gated and core does not hit low power state. btw Why do think this is
> unbalanced?

because you never do a clk_enable() on probe(), so on your first
suspend, you will disable the clock without having enabled it before,
no? Unless pm_runtime forces a runtime_resume() when you call
pm_runtime_enable()...

> >> +static int omap_usb2_runtime_resume(struct device *dev)
> >> +{
> >> +     u32 ret = 0;
> >> +     struct platform_device  *pdev = to_platform_device(dev);
> >> +     struct omap_usb *phy = platform_get_drvdata(pdev);
> >> +
> >> +     ret = clk_enable(phy->wkupclk);
> >> +     if (ret < 0)
> >> +             dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
> >> +
> >> +     return ret;
> >> +}
> >> +
> >> +static const struct dev_pm_ops omap_usb2_pm_ops = {
> >> +     SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
> >> +             NULL)
> >
> > only runtime ? What about static suspend ? We need this to work also
> > after a traditional echo mem > /sys/power/state ;-)
> 
> The static suspend case is handled by users of this phy using
> set_suspend hooks.

I'm not sure if that's too wise, what if your user enabled USB, but
for whatever reason loaded only the phy driver and not musb or dwc3. It
will fail, right ?
Felipe Balbi Aug. 6, 2012, 9:44 a.m. UTC | #7
On Mon, Aug 06, 2012 at 03:14:42PM +0530, ABRAHAM, KISHON VIJAY wrote:
> >> >> +static int omap_usb2_runtime_resume(struct device *dev)
> >> >> +{
> >> >> +     u32 ret = 0;
> >> >> +     struct platform_device  *pdev = to_platform_device(dev);
> >> >> +     struct omap_usb *phy = platform_get_drvdata(pdev);
> >> >> +
> >> >> +     ret = clk_enable(phy->wkupclk);
> >> >> +     if (ret < 0)
> >> >> +             dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
> >> >> +
> >> >> +     return ret;
> >> >> +}
> >> >> +
> >> >> +static const struct dev_pm_ops omap_usb2_pm_ops = {
> >> >> +     SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
> >> >> +             NULL)
> >> >
> >> > only runtime ? What about static suspend ? We need this to work also
> >> > after a traditional echo mem > /sys/power/state ;-)
> >>
> >> The static suspend case is handled by users of this phy using
> >> set_suspend hooks.
> >
> > I'm not sure if that's too wise, what if your user enabled USB, but
> > for whatever reason loaded only the phy driver and not musb or dwc3. It
> > will fail, right ?
> 
> The enabling and disabling of phy is solely governed by usb controller
> driver (musb/dwc3). So if you dont have musb/dwc3 loaded, the phy will
> be for sure disabled.

fair enough... that's ok then ;-)
Kishon Vijay Abraham I Aug. 6, 2012, 9:44 a.m. UTC | #8
Hi Felipe,

On Mon, Aug 6, 2012 at 2:19 PM, Felipe Balbi <balbi@ti.com> wrote:
> Hi,
>
> On Fri, Aug 03, 2012 at 08:01:44PM +0530, ABRAHAM, KISHON VIJAY wrote:
>> >> +     return 0;
>> >> +}
>> >> +
>> >> +#ifdef CONFIG_PM_RUNTIME
>> >> +
>> >> +static int omap_usb2_runtime_suspend(struct device *dev)
>> >> +{
>> >> +     struct platform_device  *pdev = to_platform_device(dev);
>> >> +     struct omap_usb *phy = platform_get_drvdata(pdev);
>> >> +
>> >> +     clk_disable(phy->wkupclk);
>> >
>> > weird. I would expect the wakeup clock to be enabled on suspend and
>> > disabled on resume. Isn't this causing any unbalanced disable warnings ?
>>
>> Even I was expecting the wakeup clock to be enabled on suspend but if
>> we have this enabled coreaon domain is never
>> gated and core does not hit low power state. btw Why do think this is
>> unbalanced?
>
> because you never do a clk_enable() on probe(), so on your first
> suspend, you will disable the clock without having enabled it before,
> no? Unless pm_runtime forces a runtime_resume() when you call
> pm_runtime_enable()...
>
>> >> +static int omap_usb2_runtime_resume(struct device *dev)
>> >> +{
>> >> +     u32 ret = 0;
>> >> +     struct platform_device  *pdev = to_platform_device(dev);
>> >> +     struct omap_usb *phy = platform_get_drvdata(pdev);
>> >> +
>> >> +     ret = clk_enable(phy->wkupclk);
>> >> +     if (ret < 0)
>> >> +             dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
>> >> +
>> >> +     return ret;
>> >> +}
>> >> +
>> >> +static const struct dev_pm_ops omap_usb2_pm_ops = {
>> >> +     SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
>> >> +             NULL)
>> >
>> > only runtime ? What about static suspend ? We need this to work also
>> > after a traditional echo mem > /sys/power/state ;-)
>>
>> The static suspend case is handled by users of this phy using
>> set_suspend hooks.
>
> I'm not sure if that's too wise, what if your user enabled USB, but
> for whatever reason loaded only the phy driver and not musb or dwc3. It
> will fail, right ?

The enabling and disabling of phy is solely governed by usb controller
driver (musb/dwc3). So if you dont have musb/dwc3 loaded, the phy will
be for sure disabled.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index d2fe064..bb0c7f4 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -8,3 +8,6 @@  properties:
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+- usb2phy :
+   The binding details of usb2phy can be found in:
+   Documentation/devicetree/bindings/usb/omap-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
new file mode 100644
index 0000000..52f503b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -0,0 +1,17 @@ 
+OMAP USB PHY
+
+OMAP USB2 PHY
+
+Required properties:
+ - compatible: Should be "ti,omap-usb2"
+ - reg : Address and length of the register set for the device. Also
+add the address of control module dev conf register until a driver for
+control module is added
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb2phy@4a0ad080 {
+	compatible = "ti,omap-usb2";
+	reg = <0x4a0ad080 0x58>,
+		<0x4a002300 0x1>;
+};
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5c87db0..c751db7 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -78,6 +78,16 @@  config TWL6030_USB
 	  are hooked to this driver through platform_data structure.
 	  The definition of internal PHY APIs are in the mach-omap2 layer.
 
+config OMAP_USB2
+	tristate "OMAP USB2 PHY Driver"
+	depends on OMAP_OCP2SCP
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the transceiver that is part of SOC. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  The USB OTG controller communicates with the comparator using this
+	  driver.
+
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
 	select USB_OTG_UTILS
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 41aa509..2c2a3ca 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -13,6 +13,7 @@  obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
 obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
+obj-$(CONFIG_OMAP_USB2)		+= omap-usb2.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o
diff --git a/drivers/usb/otg/omap-usb2.c b/drivers/usb/otg/omap-usb2.c
new file mode 100644
index 0000000..026cb3c
--- /dev/null
+++ b/drivers/usb/otg/omap-usb2.c
@@ -0,0 +1,280 @@ 
+/*
+ * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/usb/omap_usb.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+
+/**
+ * omap_usb2_set_comparator - links the comparator present in the sytem with
+ *	this phy
+ * @comparator - the companion phy(comparator) for this phy
+ *
+ * The phy companion driver should call this API passing the phy_companion
+ * filled with set_vbus and start_srp to be used by usb phy.
+ *
+ * For use by phy companion driver
+ */
+void omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+	struct omap_usb	*phy;
+	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	if (x) {
+		phy = phy_to_omapusb(x);
+		phy->comparator = comparator;
+	}
+}
+EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
+
+/**
+ * omap_usb_phy_power - power on/off the phy using control module reg
+ * @phy: struct omap_usb *
+ * @on: 0 or 1, based on powering on or off the PHY
+ *
+ * XXX: Remove this function once control module driver gets merged
+ */
+static void omap_usb_phy_power(struct omap_usb *phy, int on)
+{
+	u32 val;
+
+	if (on) {
+		val = readl(phy->control_dev);
+		if (val & PHY_PD) {
+			writel(~PHY_PD, phy->control_dev);
+			/* XXX: add proper documentation for this delay */
+			mdelay(200);
+		}
+	} else {
+		writel(PHY_PD, phy->control_dev);
+	}
+}
+
+static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
+{
+	struct omap_usb *phy = phy_to_omapusb(otg->phy);
+
+	if (!phy->comparator)
+		return -ENODEV;
+
+	return phy->comparator->set_vbus(phy->comparator, enabled);
+}
+
+static int omap_usb_start_srp(struct usb_otg *otg)
+{
+	struct omap_usb *phy = phy_to_omapusb(otg->phy);
+
+	if (!phy->comparator)
+		return -ENODEV;
+
+	return phy->comparator->start_srp(phy->comparator);
+}
+
+static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct usb_phy	*phy = otg->phy;
+
+	otg->host = host;
+	if (!host)
+		phy->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int omap_usb_set_peripheral(struct usb_otg *otg,
+		struct usb_gadget *gadget)
+{
+	struct usb_phy	*phy = otg->phy;
+
+	otg->gadget = gadget;
+	if (!gadget)
+		phy->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int omap_usb2_suspend(struct usb_phy *x, int suspend)
+{
+	u32 ret;
+	struct omap_usb *phy = phy_to_omapusb(x);
+
+	if (suspend && !phy->is_suspended) {
+		omap_usb_phy_power(phy, 0);
+		pm_runtime_put_sync(phy->dev);
+		phy->is_suspended = 1;
+	} else if (!suspend && phy->is_suspended) {
+		ret = pm_runtime_get_sync(phy->dev);
+		if (ret < 0) {
+			dev_err(phy->dev, "get_sync failed with err %d\n",
+									ret);
+			return ret;
+		}
+		omap_usb_phy_power(phy, 1);
+		phy->is_suspended = 0;
+	}
+
+	return 0;
+}
+
+static int __devinit omap_usb2_probe(struct platform_device *pdev)
+{
+	struct omap_usb			*phy;
+	struct usb_otg			*otg;
+	struct resource			*res;
+
+	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
+		return -ENOMEM;
+	}
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg) {
+		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
+		return -ENOMEM;
+	}
+
+	phy->dev		= &pdev->dev;
+
+	phy->phy.dev		= phy->dev;
+	phy->phy.label		= "omap-usb2";
+	phy->phy.set_suspend	= omap_usb2_suspend;
+	phy->phy.otg		= otg;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+	phy->control_dev = devm_request_and_ioremap(&pdev->dev, res);
+	if (phy->control_dev == NULL) {
+		dev_err(&pdev->dev, "Failed to obtain io memory\n");
+		return -ENXIO;
+	}
+
+	phy->is_suspended	= 1;
+	omap_usb_phy_power(phy, 0);
+
+	otg->set_host		= omap_usb_set_host;
+	otg->set_peripheral	= omap_usb_set_peripheral;
+	otg->set_vbus		= omap_usb_set_vbus;
+	otg->start_srp		= omap_usb_start_srp;
+	otg->phy		= &phy->phy;
+
+	phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
+	if (IS_ERR(phy->wkupclk)) {
+		dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
+		return PTR_ERR(phy->wkupclk);
+	}
+	clk_prepare(phy->wkupclk);
+
+	usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
+
+	platform_set_drvdata(pdev, phy);
+
+	pm_runtime_enable(phy->dev);
+
+	return 0;
+}
+
+static int __devexit omap_usb2_remove(struct platform_device *pdev)
+{
+	struct omap_usb	*phy = platform_get_drvdata(pdev);
+
+	clk_unprepare(phy->wkupclk);
+	usb_remove_phy(&phy->phy);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int omap_usb2_runtime_suspend(struct device *dev)
+{
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct omap_usb	*phy = platform_get_drvdata(pdev);
+
+	clk_disable(phy->wkupclk);
+
+	return 0;
+}
+
+static int omap_usb2_runtime_resume(struct device *dev)
+{
+	u32 ret = 0;
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct omap_usb	*phy = platform_get_drvdata(pdev);
+
+	ret = clk_enable(phy->wkupclk);
+	if (ret < 0)
+		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+
+	return ret;
+}
+
+static const struct dev_pm_ops omap_usb2_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
+		NULL)
+};
+
+#define DEV_PM_OPS     (&omap_usb2_pm_ops)
+#else
+#define DEV_PM_OPS     NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_usb2_id_table[] = {
+	{ .compatible = "ti,omap-usb2" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
+#endif
+
+static struct platform_driver omap_usb2_driver = {
+	.probe		= omap_usb2_probe,
+	.remove		= __devexit_p(omap_usb2_remove),
+	.driver		= {
+		.name	= "omap-usb2",
+		.owner	= THIS_MODULE,
+		.pm	= DEV_PM_OPS,
+		.of_match_table = of_match_ptr(omap_usb2_id_table),
+	},
+};
+
+static int __init usb2_omap_init(void)
+{
+	return platform_driver_register(&omap_usb2_driver);
+}
+arch_initcall(usb2_omap_init);
+
+static void __exit usb2_omap_exit(void)
+{
+	platform_driver_unregister(&omap_usb2_driver);
+}
+module_exit(usb2_omap_exit);
+
+MODULE_ALIAS("platform: omap_usb2");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP USB2 PHY DRIVER");
+MODULE_LICENSE("GPLv2");
diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
new file mode 100644
index 0000000..fcabc93
--- /dev/null
+++ b/include/linux/usb/omap_usb.h
@@ -0,0 +1,45 @@ 
+/*
+ * omap_usb.h -- omap usb2 phy header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_USB2_H
+#define __DRIVERS_OMAP_USB2_H
+
+#include <linux/usb/otg.h>
+
+struct omap_usb {
+	struct usb_phy		phy;
+	struct phy_companion	*comparator;
+	struct device		*dev;
+	u32 __iomem		*control_dev;
+	struct clk		*wkupclk;
+	u8			is_suspended:1;
+};
+
+#define	PHY_PD	0x1
+
+#define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
+
+#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
+extern void omap_usb2_set_comparator(struct phy_companion *comparator);
+#else
+static inline void omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+}
+#endif
+
+#endif /* __DRIVERS_OMAP_USB_H */
diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h
new file mode 100644
index 0000000..edd2ec2
--- /dev/null
+++ b/include/linux/usb/phy_companion.h
@@ -0,0 +1,34 @@ 
+/*
+ * phy-companion.h -- phy companion to indicate the comparator part of PHY
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_PHY_COMPANION_H
+#define __DRIVERS_PHY_COMPANION_H
+
+#include <linux/usb/otg.h>
+
+/* phy_companion to take care of VBUS, ID and srp capabilities */
+struct phy_companion {
+
+	/* effective for A-peripheral, ignored for B devices */
+	int	(*set_vbus)(struct phy_companion *x, bool enabled);
+
+	/* for B devices only:  start session with A-Host */
+	int	(*start_srp)(struct phy_companion *x);
+};
+
+#endif /* __DRIVERS_PHY_COMPANION_H */