[1/5] drivers: usb: phy: add a new driver for omap usb2 phy
diff mbox

Message ID 1346943430-18236-2-git-send-email-kishon@ti.com
State New, archived
Headers show

Commit Message

Kishon Vijay Abraham I Sept. 6, 2012, 2:57 p.m. UTC
All phy related programming like enabling/disabling the clocks, powering
on/off the phy is taken care of by this driver. It is also used for OTG
related functionality like srp.

This also includes device tree support for usb2 phy driver and
the documentation with device tree binding information is updated.

Currently writing to control module register is taken care in this
driver which will be removed once the control module driver is in place.

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
 drivers/usb/phy/Kconfig                           |    9 +
 drivers/usb/phy/Makefile                          |    1 +
 drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
 include/linux/usb/omap_usb.h                      |   46 ++++
 include/linux/usb/phy_companion.h                 |   34 +++
 6 files changed, 378 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
 create mode 100644 drivers/usb/phy/omap-usb2.c
 create mode 100644 include/linux/usb/omap_usb.h
 create mode 100644 include/linux/usb/phy_companion.h

Comments

Rob Herring Sept. 24, 2012, 1:15 p.m. UTC | #1
On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
> All phy related programming like enabling/disabling the clocks, powering
> on/off the phy is taken care of by this driver. It is also used for OTG
> related functionality like srp.
> 
> This also includes device tree support for usb2 phy driver and
> the documentation with device tree binding information is updated.
> 
> Currently writing to control module register is taken care in this
> driver which will be removed once the control module driver is in place.
> 
> Cc: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>  drivers/usb/phy/Kconfig                           |    9 +
>  drivers/usb/phy/Makefile                          |    1 +
>  drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
>  include/linux/usb/omap_usb.h                      |   46 ++++
>  include/linux/usb/phy_companion.h                 |   34 +++
>  6 files changed, 378 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>  create mode 100644 drivers/usb/phy/omap-usb2.c
>  create mode 100644 include/linux/usb/omap_usb.h
>  create mode 100644 include/linux/usb/phy_companion.h
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
> new file mode 100644
> index 0000000..80d4148
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt

This is a very generic name...

> @@ -0,0 +1,17 @@
> +USB PHY
> +
> +OMAP USB2 PHY
> +
> +Required properties:
> + - compatible: Should be "ti,omap-usb2"

...for a specific phy. However, I do think a generic binding to describe
host ctrlr to phy connections is needed.

> + - reg : Address and length of the register set for the device. Also
> +add the address of control module dev conf register until a driver for
> +control module is added

The dts should describe the h/w, not what you need for the current
driver. The 2nd reg field does not belong here.

> +
> +This is usually a subnode of ocp2scp to which it is connected.

How is usb port to phy connection described?

Rob

> +
> +usb2phy@4a0ad080 {
> +	compatible = "ti,omap-usb2";
> +	reg = <0x4a0ad080 0x58>,
> +	      <0x4a002300 0x4>;
> +};
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index 2838adb..63c339b 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -4,6 +4,15 @@
>  comment "USB Physical Layer drivers"
>  	depends on USB || USB_GADGET
>  
> +config OMAP_USB2
> +	tristate "OMAP USB2 PHY Driver"
> +	select USB_OTG_UTILS
> +	help
> +	  Enable this to support the transceiver that is part of SOC. This
> +	  driver takes care of all the PHY functionality apart from comparator.
> +	  The USB OTG controller communicates with the comparator using this
> +	  driver.
> +
>  config USB_ISP1301
>  	tristate "NXP ISP1301 USB transceiver support"
>  	depends on USB || USB_GADGET
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index bb948fb..b069f29 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -4,6 +4,7 @@
>  
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>  
> +obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>  obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
>  obj-$(CONFIG_MV_U3D_PHY)		+= mv_u3d_phy.o
>  obj-$(CONFIG_USB_EHCI_TEGRA)	+= tegra_usb_phy.o
> diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
> new file mode 100644
> index 0000000..15ab3d6
> --- /dev/null
> +++ b/drivers/usb/phy/omap-usb2.c
> @@ -0,0 +1,271 @@
> +/*
> + * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/usb/omap_usb.h>
> +#include <linux/usb/phy_companion.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/delay.h>
> +
> +/**
> + * omap_usb2_set_comparator - links the comparator present in the sytem with
> + *	this phy
> + * @comparator - the companion phy(comparator) for this phy
> + *
> + * The phy companion driver should call this API passing the phy_companion
> + * filled with set_vbus and start_srp to be used by usb phy.
> + *
> + * For use by phy companion driver
> + */
> +int omap_usb2_set_comparator(struct phy_companion *comparator)
> +{
> +	struct omap_usb	*phy;
> +	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
> +
> +	if (IS_ERR(x))
> +		return -ENODEV;
> +
> +	phy = phy_to_omapusb(x);
> +	phy->comparator = comparator;
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
> +
> +/**
> + * omap_usb_phy_power - power on/off the phy using control module reg
> + * @phy: struct omap_usb *
> + * @on: 0 or 1, based on powering on or off the PHY
> + *
> + * XXX: Remove this function once control module driver gets merged
> + */
> +static void omap_usb_phy_power(struct omap_usb *phy, int on)
> +{
> +	u32 val;
> +
> +	if (on) {
> +		val = readl(phy->control_dev);
> +		if (val & PHY_PD) {
> +			writel(~PHY_PD, phy->control_dev);
> +			/* XXX: add proper documentation for this delay */
> +			mdelay(200);
> +		}
> +	} else {
> +		writel(PHY_PD, phy->control_dev);
> +	}
> +}
> +
> +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
> +{
> +	struct omap_usb *phy = phy_to_omapusb(otg->phy);
> +
> +	if (!phy->comparator)
> +		return -ENODEV;
> +
> +	return phy->comparator->set_vbus(phy->comparator, enabled);
> +}
> +
> +static int omap_usb_start_srp(struct usb_otg *otg)
> +{
> +	struct omap_usb *phy = phy_to_omapusb(otg->phy);
> +
> +	if (!phy->comparator)
> +		return -ENODEV;
> +
> +	return phy->comparator->start_srp(phy->comparator);
> +}
> +
> +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
> +{
> +	struct usb_phy	*phy = otg->phy;
> +
> +	otg->host = host;
> +	if (!host)
> +		phy->state = OTG_STATE_UNDEFINED;
> +
> +	return 0;
> +}
> +
> +static int omap_usb_set_peripheral(struct usb_otg *otg,
> +		struct usb_gadget *gadget)
> +{
> +	struct usb_phy	*phy = otg->phy;
> +
> +	otg->gadget = gadget;
> +	if (!gadget)
> +		phy->state = OTG_STATE_UNDEFINED;
> +
> +	return 0;
> +}
> +
> +static int omap_usb2_suspend(struct usb_phy *x, int suspend)
> +{
> +	u32 ret;
> +	struct omap_usb *phy = phy_to_omapusb(x);
> +
> +	if (suspend && !phy->is_suspended) {
> +		omap_usb_phy_power(phy, 0);
> +		pm_runtime_put_sync(phy->dev);
> +		phy->is_suspended = 1;
> +	} else if (!suspend && phy->is_suspended) {
> +		ret = pm_runtime_get_sync(phy->dev);
> +		if (ret < 0) {
> +			dev_err(phy->dev, "get_sync failed with err %d\n",
> +									ret);
> +			return ret;
> +		}
> +		omap_usb_phy_power(phy, 1);
> +		phy->is_suspended = 0;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __devinit omap_usb2_probe(struct platform_device *pdev)
> +{
> +	struct omap_usb			*phy;
> +	struct usb_otg			*otg;
> +	struct resource			*res;
> +
> +	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy) {
> +		dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
> +		return -ENOMEM;
> +	}
> +
> +	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> +	if (!otg) {
> +		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
> +		return -ENOMEM;
> +	}
> +
> +	phy->dev		= &pdev->dev;
> +
> +	phy->phy.dev		= phy->dev;
> +	phy->phy.label		= "omap-usb2";
> +	phy->phy.set_suspend	= omap_usb2_suspend;
> +	phy->phy.otg		= otg;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +
> +	phy->control_dev = devm_request_and_ioremap(&pdev->dev, res);
> +	if (phy->control_dev == NULL) {
> +		dev_err(&pdev->dev, "Failed to obtain io memory\n");
> +		return -ENXIO;
> +	}
> +
> +	phy->is_suspended	= 1;
> +	omap_usb_phy_power(phy, 0);
> +
> +	otg->set_host		= omap_usb_set_host;
> +	otg->set_peripheral	= omap_usb_set_peripheral;
> +	otg->set_vbus		= omap_usb_set_vbus;
> +	otg->start_srp		= omap_usb_start_srp;
> +	otg->phy		= &phy->phy;
> +
> +	phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
> +	if (IS_ERR(phy->wkupclk)) {
> +		dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
> +		return PTR_ERR(phy->wkupclk);
> +	}
> +	clk_prepare(phy->wkupclk);
> +
> +	usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
> +
> +	platform_set_drvdata(pdev, phy);
> +
> +	pm_runtime_enable(phy->dev);
> +
> +	return 0;
> +}
> +
> +static int __devexit omap_usb2_remove(struct platform_device *pdev)
> +{
> +	struct omap_usb	*phy = platform_get_drvdata(pdev);
> +
> +	clk_unprepare(phy->wkupclk);
> +	usb_remove_phy(&phy->phy);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_RUNTIME
> +
> +static int omap_usb2_runtime_suspend(struct device *dev)
> +{
> +	struct platform_device	*pdev = to_platform_device(dev);
> +	struct omap_usb	*phy = platform_get_drvdata(pdev);
> +
> +	clk_disable(phy->wkupclk);
> +
> +	return 0;
> +}
> +
> +static int omap_usb2_runtime_resume(struct device *dev)
> +{
> +	u32 ret = 0;
> +	struct platform_device	*pdev = to_platform_device(dev);
> +	struct omap_usb	*phy = platform_get_drvdata(pdev);
> +
> +	ret = clk_enable(phy->wkupclk);
> +	if (ret < 0)
> +		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops omap_usb2_pm_ops = {
> +	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
> +		NULL)
> +};
> +
> +#define DEV_PM_OPS     (&omap_usb2_pm_ops)
> +#else
> +#define DEV_PM_OPS     NULL
> +#endif
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id omap_usb2_id_table[] = {
> +	{ .compatible = "ti,omap-usb2" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
> +#endif
> +
> +static struct platform_driver omap_usb2_driver = {
> +	.probe		= omap_usb2_probe,
> +	.remove		= __devexit_p(omap_usb2_remove),
> +	.driver		= {
> +		.name	= "omap-usb2",
> +		.owner	= THIS_MODULE,
> +		.pm	= DEV_PM_OPS,
> +		.of_match_table = of_match_ptr(omap_usb2_id_table),
> +	},
> +};
> +
> +module_platform_driver(omap_usb2_driver);
> +
> +MODULE_ALIAS("platform: omap_usb2");
> +MODULE_AUTHOR("Texas Instruments Inc.");
> +MODULE_DESCRIPTION("OMAP USB2 phy driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
> new file mode 100644
> index 0000000..0ea17f8
> --- /dev/null
> +++ b/include/linux/usb/omap_usb.h
> @@ -0,0 +1,46 @@
> +/*
> + * omap_usb.h -- omap usb2 phy header file
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __DRIVERS_OMAP_USB2_H
> +#define __DRIVERS_OMAP_USB2_H
> +
> +#include <linux/usb/otg.h>
> +
> +struct omap_usb {
> +	struct usb_phy		phy;
> +	struct phy_companion	*comparator;
> +	struct device		*dev;
> +	u32 __iomem		*control_dev;
> +	struct clk		*wkupclk;
> +	u8			is_suspended:1;
> +};
> +
> +#define	PHY_PD	0x1
> +
> +#define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
> +
> +#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
> +extern int omap_usb2_set_comparator(struct phy_companion *comparator);
> +#else
> +static inline int omap_usb2_set_comparator(struct phy_companion *comparator)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
> +#endif /* __DRIVERS_OMAP_USB_H */
> diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h
> new file mode 100644
> index 0000000..edd2ec2
> --- /dev/null
> +++ b/include/linux/usb/phy_companion.h
> @@ -0,0 +1,34 @@
> +/*
> + * phy-companion.h -- phy companion to indicate the comparator part of PHY
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __DRIVERS_PHY_COMPANION_H
> +#define __DRIVERS_PHY_COMPANION_H
> +
> +#include <linux/usb/otg.h>
> +
> +/* phy_companion to take care of VBUS, ID and srp capabilities */
> +struct phy_companion {
> +
> +	/* effective for A-peripheral, ignored for B devices */
> +	int	(*set_vbus)(struct phy_companion *x, bool enabled);
> +
> +	/* for B devices only:  start session with A-Host */
> +	int	(*start_srp)(struct phy_companion *x);
> +};
> +
> +#endif /* __DRIVERS_PHY_COMPANION_H */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I Sept. 25, 2012, 10:06 a.m. UTC | #2
Hi,

On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com> wrote:
> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>> All phy related programming like enabling/disabling the clocks, powering
>> on/off the phy is taken care of by this driver. It is also used for OTG
>> related functionality like srp.
>>
>> This also includes device tree support for usb2 phy driver and
>> the documentation with device tree binding information is updated.
>>
>> Currently writing to control module register is taken care in this
>> driver which will be removed once the control module driver is in place.
>>
>> Cc: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>  drivers/usb/phy/Kconfig                           |    9 +
>>  drivers/usb/phy/Makefile                          |    1 +
>>  drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
>>  include/linux/usb/omap_usb.h                      |   46 ++++
>>  include/linux/usb/phy_companion.h                 |   34 +++
>>  6 files changed, 378 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>  create mode 100644 drivers/usb/phy/omap-usb2.c
>>  create mode 100644 include/linux/usb/omap_usb.h
>>  create mode 100644 include/linux/usb/phy_companion.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> new file mode 100644
>> index 0000000..80d4148
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>
> This is a very generic name...
>
>> @@ -0,0 +1,17 @@
>> +USB PHY
>> +
>> +OMAP USB2 PHY
>> +
>> +Required properties:
>> + - compatible: Should be "ti,omap-usb2"
>
> ...for a specific phy. However, I do think a generic binding to describe
> host ctrlr to phy connections is needed.
>
>> + - reg : Address and length of the register set for the device. Also
>> +add the address of control module dev conf register until a driver for
>> +control module is added
>
> The dts should describe the h/w, not what you need for the current
> driver. The 2nd reg field does not belong here.

Indeed. This was discussed and agreed upon as a interim solution till
we have a control module driver in place to write to the control
module register.
>
>> +
>> +This is usually a subnode of ocp2scp to which it is connected.
>
> How is usb port to phy connection described?
Currently the usb controller to phy connection is established only by
type. We have a couple of patches being currently discussed in the
list to establish the connection by phandle.

https://patchwork.kernel.org/patch/1457801/ (Generic PHY Framework:
devm_of_phy_get())
http://www.spinics.net/lists/linux-usb/msg69547.html

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring Sept. 27, 2012, 2:24 p.m. UTC | #3
On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
> Hi,
> 
> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com> wrote:
>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>> All phy related programming like enabling/disabling the clocks, powering
>>> on/off the phy is taken care of by this driver. It is also used for OTG
>>> related functionality like srp.
>>>
>>> This also includes device tree support for usb2 phy driver and
>>> the documentation with device tree binding information is updated.
>>>
>>> Currently writing to control module register is taken care in this
>>> driver which will be removed once the control module driver is in place.
>>>
>>> Cc: Felipe Balbi <balbi@ti.com>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> ---
>>>  Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>  drivers/usb/phy/Kconfig                           |    9 +
>>>  drivers/usb/phy/Makefile                          |    1 +
>>>  drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
>>>  include/linux/usb/omap_usb.h                      |   46 ++++
>>>  include/linux/usb/phy_companion.h                 |   34 +++
>>>  6 files changed, 378 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>>  create mode 100644 drivers/usb/phy/omap-usb2.c
>>>  create mode 100644 include/linux/usb/omap_usb.h
>>>  create mode 100644 include/linux/usb/phy_companion.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>> new file mode 100644
>>> index 0000000..80d4148
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>
>> This is a very generic name...
>>
>>> @@ -0,0 +1,17 @@
>>> +USB PHY
>>> +
>>> +OMAP USB2 PHY
>>> +
>>> +Required properties:
>>> + - compatible: Should be "ti,omap-usb2"
>>
>> ...for a specific phy. However, I do think a generic binding to describe
>> host ctrlr to phy connections is needed.
>>
>>> + - reg : Address and length of the register set for the device. Also
>>> +add the address of control module dev conf register until a driver for
>>> +control module is added
>>
>> The dts should describe the h/w, not what you need for the current
>> driver. The 2nd reg field does not belong here.
> 
> Indeed. This was discussed and agreed upon as a interim solution till
> we have a control module driver in place to write to the control
> module register.

Discussed where and agreed by who? I for one do not agree.

Rob

>>
>>> +
>>> +This is usually a subnode of ocp2scp to which it is connected.
>>
>> How is usb port to phy connection described?
> Currently the usb controller to phy connection is established only by
> type. We have a couple of patches being currently discussed in the
> list to establish the connection by phandle.
> 
> https://patchwork.kernel.org/patch/1457801/ (Generic PHY Framework:
> devm_of_phy_get())
> http://www.spinics.net/lists/linux-usb/msg69547.html
> 
> Thanks
> Kishon
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I Sept. 27, 2012, 3 p.m. UTC | #4
Hi,

On Thu, Sep 27, 2012 at 7:54 PM, Rob Herring <robherring2@gmail.com> wrote:
> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
>> Hi,
>>
>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com> wrote:
>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>>> All phy related programming like enabling/disabling the clocks, powering
>>>> on/off the phy is taken care of by this driver. It is also used for OTG
>>>> related functionality like srp.
>>>>
>>>> This also includes device tree support for usb2 phy driver and
>>>> the documentation with device tree binding information is updated.
>>>>
>>>> Currently writing to control module register is taken care in this
>>>> driver which will be removed once the control module driver is in place.
>>>>
>>>> Cc: Felipe Balbi <balbi@ti.com>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>> ---
>>>>  Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>>  drivers/usb/phy/Kconfig                           |    9 +
>>>>  drivers/usb/phy/Makefile                          |    1 +
>>>>  drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
>>>>  include/linux/usb/omap_usb.h                      |   46 ++++
>>>>  include/linux/usb/phy_companion.h                 |   34 +++
>>>>  6 files changed, 378 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>  create mode 100644 drivers/usb/phy/omap-usb2.c
>>>>  create mode 100644 include/linux/usb/omap_usb.h
>>>>  create mode 100644 include/linux/usb/phy_companion.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>> new file mode 100644
>>>> index 0000000..80d4148
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>
>>> This is a very generic name...
>>>
>>>> @@ -0,0 +1,17 @@
>>>> +USB PHY
>>>> +
>>>> +OMAP USB2 PHY
>>>> +
>>>> +Required properties:
>>>> + - compatible: Should be "ti,omap-usb2"
>>>
>>> ...for a specific phy. However, I do think a generic binding to describe
>>> host ctrlr to phy connections is needed.
>>>
>>>> + - reg : Address and length of the register set for the device. Also
>>>> +add the address of control module dev conf register until a driver for
>>>> +control module is added
>>>
>>> The dts should describe the h/w, not what you need for the current
>>> driver. The 2nd reg field does not belong here.
>>
>> Indeed. This was discussed and agreed upon as a interim solution till
>> we have a control module driver in place to write to the control
>> module register.
>
> Discussed where and agreed by who? I for one do not agree.

Please find the discussion @ https://patchwork.kernel.org/patch/1415261/

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Benoit Cousson Sept. 27, 2012, 10:48 p.m. UTC | #5
On 9/27/2012 7:24 AM, Rob Herring wrote:
> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
>> Hi,
>>
>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com> wrote:
>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>>> All phy related programming like enabling/disabling the clocks, powering
>>>> on/off the phy is taken care of by this driver. It is also used for OTG
>>>> related functionality like srp.
>>>>
>>>> This also includes device tree support for usb2 phy driver and
>>>> the documentation with device tree binding information is updated.
>>>>
>>>> Currently writing to control module register is taken care in this
>>>> driver which will be removed once the control module driver is in place.
>>>>
>>>> Cc: Felipe Balbi <balbi@ti.com>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>> ---
>>>>   Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>>   drivers/usb/phy/Kconfig                           |    9 +
>>>>   drivers/usb/phy/Makefile                          |    1 +
>>>>   drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
>>>>   include/linux/usb/omap_usb.h                      |   46 ++++
>>>>   include/linux/usb/phy_companion.h                 |   34 +++
>>>>   6 files changed, 378 insertions(+)
>>>>   create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>   create mode 100644 drivers/usb/phy/omap-usb2.c
>>>>   create mode 100644 include/linux/usb/omap_usb.h
>>>>   create mode 100644 include/linux/usb/phy_companion.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>> new file mode 100644
>>>> index 0000000..80d4148
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>
>>> This is a very generic name...
>>>
>>>> @@ -0,0 +1,17 @@
>>>> +USB PHY
>>>> +
>>>> +OMAP USB2 PHY
>>>> +
>>>> +Required properties:
>>>> + - compatible: Should be "ti,omap-usb2"
>>>
>>> ...for a specific phy. However, I do think a generic binding to describe
>>> host ctrlr to phy connections is needed.
>>>
>>>> + - reg : Address and length of the register set for the device. Also
>>>> +add the address of control module dev conf register until a driver for
>>>> +control module is added
>>>
>>> The dts should describe the h/w, not what you need for the current
>>> driver. The 2nd reg field does not belong here.
>>
>> Indeed. This was discussed and agreed upon as a interim solution till
>> we have a control module driver in place to write to the control
>> module register.
>
> Discussed where and agreed by who? I for one do not agree.

Yeah, what was tolerated was the addition of that address inside hwmod 
data, but I do agree that it should not go into DTS.

Regards,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I Sept. 28, 2012, 10:07 a.m. UTC | #6
Hi,

On Fri, Sep 28, 2012 at 4:18 AM, Cousson, Benoit <b-cousson@ti.com> wrote:
> On 9/27/2012 7:24 AM, Rob Herring wrote:
>>
>> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
>>>
>>> Hi,
>>>
>>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com>
>>> wrote:
>>>>
>>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>>>>
>>>>> All phy related programming like enabling/disabling the clocks,
>>>>> powering
>>>>> on/off the phy is taken care of by this driver. It is also used for OTG
>>>>> related functionality like srp.
>>>>>
>>>>> This also includes device tree support for usb2 phy driver and
>>>>> the documentation with device tree binding information is updated.
>>>>>
>>>>> Currently writing to control module register is taken care in this
>>>>> driver which will be removed once the control module driver is in
>>>>> place.
>>>>>
>>>>> Cc: Felipe Balbi <balbi@ti.com>
>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>>> ---
>>>>>   Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>>>   drivers/usb/phy/Kconfig                           |    9 +
>>>>>   drivers/usb/phy/Makefile                          |    1 +
>>>>>   drivers/usb/phy/omap-usb2.c                       |  271
>>>>> +++++++++++++++++++++
>>>>>   include/linux/usb/omap_usb.h                      |   46 ++++
>>>>>   include/linux/usb/phy_companion.h                 |   34 +++
>>>>>   6 files changed, 378 insertions(+)
>>>>>   create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>   create mode 100644 drivers/usb/phy/omap-usb2.c
>>>>>   create mode 100644 include/linux/usb/omap_usb.h
>>>>>   create mode 100644 include/linux/usb/phy_companion.h
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>> b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>> new file mode 100644
>>>>> index 0000000..80d4148
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>
>>>>
>>>> This is a very generic name...
>>>>
>>>>> @@ -0,0 +1,17 @@
>>>>> +USB PHY
>>>>> +
>>>>> +OMAP USB2 PHY
>>>>> +
>>>>> +Required properties:
>>>>> + - compatible: Should be "ti,omap-usb2"
>>>>
>>>>
>>>> ...for a specific phy. However, I do think a generic binding to describe
>>>> host ctrlr to phy connections is needed.
>>>>
>>>>> + - reg : Address and length of the register set for the device. Also
>>>>> +add the address of control module dev conf register until a driver for
>>>>> +control module is added
>>>>
>>>>
>>>> The dts should describe the h/w, not what you need for the current
>>>> driver. The 2nd reg field does not belong here.
>>>
>>>
>>> Indeed. This was discussed and agreed upon as a interim solution till
>>> we have a control module driver in place to write to the control
>>> module register.
>>
>>
>> Discussed where and agreed by who? I for one do not agree.
>
>
> Yeah, what was tolerated was the addition of that address inside hwmod data,
> but I do agree that it should not go into DTS.

So how can we handle reg writes to control module until we have a
control module driver. usb2 phy does not have a hwmod data for itself.
Do you think we should add a new hwmod data for usb2 phy and use this
in the usb2phy data node in the dts file?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Benoit Cousson Sept. 28, 2012, 3:12 p.m. UTC | #7
On 9/28/2012 3:07 AM, ABRAHAM, KISHON VIJAY wrote:
> Hi,
>
> On Fri, Sep 28, 2012 at 4:18 AM, Cousson, Benoit <b-cousson@ti.com> wrote:
>> On 9/27/2012 7:24 AM, Rob Herring wrote:
>>>
>>> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
>>>>
>>>> Hi,
>>>>
>>>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com>
>>>> wrote:
>>>>>
>>>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>>>>>
>>>>>> All phy related programming like enabling/disabling the clocks,
>>>>>> powering
>>>>>> on/off the phy is taken care of by this driver. It is also used for OTG
>>>>>> related functionality like srp.
>>>>>>
>>>>>> This also includes device tree support for usb2 phy driver and
>>>>>> the documentation with device tree binding information is updated.
>>>>>>
>>>>>> Currently writing to control module register is taken care in this
>>>>>> driver which will be removed once the control module driver is in
>>>>>> place.
>>>>>>
>>>>>> Cc: Felipe Balbi <balbi@ti.com>
>>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>>>> ---
>>>>>>    Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>>>>    drivers/usb/phy/Kconfig                           |    9 +
>>>>>>    drivers/usb/phy/Makefile                          |    1 +
>>>>>>    drivers/usb/phy/omap-usb2.c                       |  271
>>>>>> +++++++++++++++++++++
>>>>>>    include/linux/usb/omap_usb.h                      |   46 ++++
>>>>>>    include/linux/usb/phy_companion.h                 |   34 +++
>>>>>>    6 files changed, 378 insertions(+)
>>>>>>    create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>>    create mode 100644 drivers/usb/phy/omap-usb2.c
>>>>>>    create mode 100644 include/linux/usb/omap_usb.h
>>>>>>    create mode 100644 include/linux/usb/phy_companion.h
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>> b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>> new file mode 100644
>>>>>> index 0000000..80d4148
>>>>>> --- /dev/null
>>>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>
>>>>>
>>>>> This is a very generic name...
>>>>>
>>>>>> @@ -0,0 +1,17 @@
>>>>>> +USB PHY
>>>>>> +
>>>>>> +OMAP USB2 PHY
>>>>>> +
>>>>>> +Required properties:
>>>>>> + - compatible: Should be "ti,omap-usb2"
>>>>>
>>>>>
>>>>> ...for a specific phy. However, I do think a generic binding to describe
>>>>> host ctrlr to phy connections is needed.
>>>>>
>>>>>> + - reg : Address and length of the register set for the device. Also
>>>>>> +add the address of control module dev conf register until a driver for
>>>>>> +control module is added
>>>>>
>>>>>
>>>>> The dts should describe the h/w, not what you need for the current
>>>>> driver. The 2nd reg field does not belong here.
>>>>
>>>>
>>>> Indeed. This was discussed and agreed upon as a interim solution till
>>>> we have a control module driver in place to write to the control
>>>> module register.
>>>
>>>
>>> Discussed where and agreed by who? I for one do not agree.
>>
>>
>> Yeah, what was tolerated was the addition of that address inside hwmod data,
>> but I do agree that it should not go into DTS.
>
> So how can we handle reg writes to control module until we have a
> control module driver. usb2 phy does not have a hwmod data for itself.
> Do you think we should add a new hwmod data for usb2 phy and use this
> in the usb2phy data node in the dts file?

Now, I'm confused... didn't you already do that? What was the hwmod you 
added?

Maybe it is time to write your own control module driver now.

Talking with Tony on that, there is no need for a common control driver, 
it is up to each individual control driver to handle their own register 
space. It means that you should probably just add a simple driver to 
access these region.

Regards,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I Sept. 28, 2012, 6:59 p.m. UTC | #8
Hi,

On Fri, Sep 28, 2012 at 8:42 PM, Cousson, Benoit <b-cousson@ti.com> wrote:
> On 9/28/2012 3:07 AM, ABRAHAM, KISHON VIJAY wrote:
>>
>> Hi,
>>
>> On Fri, Sep 28, 2012 at 4:18 AM, Cousson, Benoit <b-cousson@ti.com> wrote:
>>>
>>> On 9/27/2012 7:24 AM, Rob Herring wrote:
>>>>
>>>>
>>>> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
>>>>>
>>>>>
>>>>> Hi,
>>>>>
>>>>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@gmail.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>>>>>>
>>>>>>>
>>>>>>> All phy related programming like enabling/disabling the clocks,
>>>>>>> powering
>>>>>>> on/off the phy is taken care of by this driver. It is also used for
>>>>>>> OTG
>>>>>>> related functionality like srp.
>>>>>>>
>>>>>>> This also includes device tree support for usb2 phy driver and
>>>>>>> the documentation with device tree binding information is updated.
>>>>>>>
>>>>>>> Currently writing to control module register is taken care in this
>>>>>>> driver which will be removed once the control module driver is in
>>>>>>> place.
>>>>>>>
>>>>>>> Cc: Felipe Balbi <balbi@ti.com>
>>>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>>>>> ---
>>>>>>>    Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>>>>>    drivers/usb/phy/Kconfig                           |    9 +
>>>>>>>    drivers/usb/phy/Makefile                          |    1 +
>>>>>>>    drivers/usb/phy/omap-usb2.c                       |  271
>>>>>>> +++++++++++++++++++++
>>>>>>>    include/linux/usb/omap_usb.h                      |   46 ++++
>>>>>>>    include/linux/usb/phy_companion.h                 |   34 +++
>>>>>>>    6 files changed, 378 insertions(+)
>>>>>>>    create mode 100644
>>>>>>> Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>>>    create mode 100644 drivers/usb/phy/omap-usb2.c
>>>>>>>    create mode 100644 include/linux/usb/omap_usb.h
>>>>>>>    create mode 100644 include/linux/usb/phy_companion.h
>>>>>>>
>>>>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>>> b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>>> new file mode 100644
>>>>>>> index 0000000..80d4148
>>>>>>> --- /dev/null
>>>>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>>>
>>>>>>
>>>>>>
>>>>>> This is a very generic name...
>>>>>>
>>>>>>> @@ -0,0 +1,17 @@
>>>>>>> +USB PHY
>>>>>>> +
>>>>>>> +OMAP USB2 PHY
>>>>>>> +
>>>>>>> +Required properties:
>>>>>>> + - compatible: Should be "ti,omap-usb2"
>>>>>>
>>>>>>
>>>>>>
>>>>>> ...for a specific phy. However, I do think a generic binding to
>>>>>> describe
>>>>>> host ctrlr to phy connections is needed.
>>>>>>
>>>>>>> + - reg : Address and length of the register set for the device. Also
>>>>>>> +add the address of control module dev conf register until a driver
>>>>>>> for
>>>>>>> +control module is added
>>>>>>
>>>>>>
>>>>>>
>>>>>> The dts should describe the h/w, not what you need for the current
>>>>>> driver. The 2nd reg field does not belong here.
>>>>>
>>>>>
>>>>>
>>>>> Indeed. This was discussed and agreed upon as a interim solution till
>>>>> we have a control module driver in place to write to the control
>>>>> module register.
>>>>
>>>>
>>>>
>>>> Discussed where and agreed by who? I for one do not agree.
>>>
>>>
>>>
>>> Yeah, what was tolerated was the addition of that address inside hwmod
>>> data,
>>> but I do agree that it should not go into DTS.
>>
>>
>> So how can we handle reg writes to control module until we have a
>> control module driver. usb2 phy does not have a hwmod data for itself.
>> Do you think we should add a new hwmod data for usb2 phy and use this
>> in the usb2phy data node in the dts file?
>
>
> Now, I'm confused... didn't you already do that? What was the hwmod you
> added?

That was in usb_otg_hs (musb glue for omap) for writing to MUSB
mailbox. This is for usb2 phy for powering on/off the PHY.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
new file mode 100644
index 0000000..80d4148
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
@@ -0,0 +1,17 @@ 
+USB PHY
+
+OMAP USB2 PHY
+
+Required properties:
+ - compatible: Should be "ti,omap-usb2"
+ - reg : Address and length of the register set for the device. Also
+add the address of control module dev conf register until a driver for
+control module is added
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb2phy@4a0ad080 {
+	compatible = "ti,omap-usb2";
+	reg = <0x4a0ad080 0x58>,
+	      <0x4a002300 0x4>;
+};
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2838adb..63c339b 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -4,6 +4,15 @@ 
 comment "USB Physical Layer drivers"
 	depends on USB || USB_GADGET
 
+config OMAP_USB2
+	tristate "OMAP USB2 PHY Driver"
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the transceiver that is part of SOC. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  The USB OTG controller communicates with the comparator using this
+	  driver.
+
 config USB_ISP1301
 	tristate "NXP ISP1301 USB transceiver support"
 	depends on USB || USB_GADGET
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index bb948fb..b069f29 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -4,6 +4,7 @@ 
 
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
+obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
 obj-$(CONFIG_MV_U3D_PHY)		+= mv_u3d_phy.o
 obj-$(CONFIG_USB_EHCI_TEGRA)	+= tegra_usb_phy.o
diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
new file mode 100644
index 0000000..15ab3d6
--- /dev/null
+++ b/drivers/usb/phy/omap-usb2.c
@@ -0,0 +1,271 @@ 
+/*
+ * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/usb/omap_usb.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+
+/**
+ * omap_usb2_set_comparator - links the comparator present in the sytem with
+ *	this phy
+ * @comparator - the companion phy(comparator) for this phy
+ *
+ * The phy companion driver should call this API passing the phy_companion
+ * filled with set_vbus and start_srp to be used by usb phy.
+ *
+ * For use by phy companion driver
+ */
+int omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+	struct omap_usb	*phy;
+	struct usb_phy	*x = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(x))
+		return -ENODEV;
+
+	phy = phy_to_omapusb(x);
+	phy->comparator = comparator;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
+
+/**
+ * omap_usb_phy_power - power on/off the phy using control module reg
+ * @phy: struct omap_usb *
+ * @on: 0 or 1, based on powering on or off the PHY
+ *
+ * XXX: Remove this function once control module driver gets merged
+ */
+static void omap_usb_phy_power(struct omap_usb *phy, int on)
+{
+	u32 val;
+
+	if (on) {
+		val = readl(phy->control_dev);
+		if (val & PHY_PD) {
+			writel(~PHY_PD, phy->control_dev);
+			/* XXX: add proper documentation for this delay */
+			mdelay(200);
+		}
+	} else {
+		writel(PHY_PD, phy->control_dev);
+	}
+}
+
+static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
+{
+	struct omap_usb *phy = phy_to_omapusb(otg->phy);
+
+	if (!phy->comparator)
+		return -ENODEV;
+
+	return phy->comparator->set_vbus(phy->comparator, enabled);
+}
+
+static int omap_usb_start_srp(struct usb_otg *otg)
+{
+	struct omap_usb *phy = phy_to_omapusb(otg->phy);
+
+	if (!phy->comparator)
+		return -ENODEV;
+
+	return phy->comparator->start_srp(phy->comparator);
+}
+
+static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct usb_phy	*phy = otg->phy;
+
+	otg->host = host;
+	if (!host)
+		phy->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int omap_usb_set_peripheral(struct usb_otg *otg,
+		struct usb_gadget *gadget)
+{
+	struct usb_phy	*phy = otg->phy;
+
+	otg->gadget = gadget;
+	if (!gadget)
+		phy->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int omap_usb2_suspend(struct usb_phy *x, int suspend)
+{
+	u32 ret;
+	struct omap_usb *phy = phy_to_omapusb(x);
+
+	if (suspend && !phy->is_suspended) {
+		omap_usb_phy_power(phy, 0);
+		pm_runtime_put_sync(phy->dev);
+		phy->is_suspended = 1;
+	} else if (!suspend && phy->is_suspended) {
+		ret = pm_runtime_get_sync(phy->dev);
+		if (ret < 0) {
+			dev_err(phy->dev, "get_sync failed with err %d\n",
+									ret);
+			return ret;
+		}
+		omap_usb_phy_power(phy, 1);
+		phy->is_suspended = 0;
+	}
+
+	return 0;
+}
+
+static int __devinit omap_usb2_probe(struct platform_device *pdev)
+{
+	struct omap_usb			*phy;
+	struct usb_otg			*otg;
+	struct resource			*res;
+
+	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
+		return -ENOMEM;
+	}
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg) {
+		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
+		return -ENOMEM;
+	}
+
+	phy->dev		= &pdev->dev;
+
+	phy->phy.dev		= phy->dev;
+	phy->phy.label		= "omap-usb2";
+	phy->phy.set_suspend	= omap_usb2_suspend;
+	phy->phy.otg		= otg;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+	phy->control_dev = devm_request_and_ioremap(&pdev->dev, res);
+	if (phy->control_dev == NULL) {
+		dev_err(&pdev->dev, "Failed to obtain io memory\n");
+		return -ENXIO;
+	}
+
+	phy->is_suspended	= 1;
+	omap_usb_phy_power(phy, 0);
+
+	otg->set_host		= omap_usb_set_host;
+	otg->set_peripheral	= omap_usb_set_peripheral;
+	otg->set_vbus		= omap_usb_set_vbus;
+	otg->start_srp		= omap_usb_start_srp;
+	otg->phy		= &phy->phy;
+
+	phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
+	if (IS_ERR(phy->wkupclk)) {
+		dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
+		return PTR_ERR(phy->wkupclk);
+	}
+	clk_prepare(phy->wkupclk);
+
+	usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
+
+	platform_set_drvdata(pdev, phy);
+
+	pm_runtime_enable(phy->dev);
+
+	return 0;
+}
+
+static int __devexit omap_usb2_remove(struct platform_device *pdev)
+{
+	struct omap_usb	*phy = platform_get_drvdata(pdev);
+
+	clk_unprepare(phy->wkupclk);
+	usb_remove_phy(&phy->phy);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int omap_usb2_runtime_suspend(struct device *dev)
+{
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct omap_usb	*phy = platform_get_drvdata(pdev);
+
+	clk_disable(phy->wkupclk);
+
+	return 0;
+}
+
+static int omap_usb2_runtime_resume(struct device *dev)
+{
+	u32 ret = 0;
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct omap_usb	*phy = platform_get_drvdata(pdev);
+
+	ret = clk_enable(phy->wkupclk);
+	if (ret < 0)
+		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+
+	return ret;
+}
+
+static const struct dev_pm_ops omap_usb2_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
+		NULL)
+};
+
+#define DEV_PM_OPS     (&omap_usb2_pm_ops)
+#else
+#define DEV_PM_OPS     NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_usb2_id_table[] = {
+	{ .compatible = "ti,omap-usb2" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
+#endif
+
+static struct platform_driver omap_usb2_driver = {
+	.probe		= omap_usb2_probe,
+	.remove		= __devexit_p(omap_usb2_remove),
+	.driver		= {
+		.name	= "omap-usb2",
+		.owner	= THIS_MODULE,
+		.pm	= DEV_PM_OPS,
+		.of_match_table = of_match_ptr(omap_usb2_id_table),
+	},
+};
+
+module_platform_driver(omap_usb2_driver);
+
+MODULE_ALIAS("platform: omap_usb2");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP USB2 phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
new file mode 100644
index 0000000..0ea17f8
--- /dev/null
+++ b/include/linux/usb/omap_usb.h
@@ -0,0 +1,46 @@ 
+/*
+ * omap_usb.h -- omap usb2 phy header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_USB2_H
+#define __DRIVERS_OMAP_USB2_H
+
+#include <linux/usb/otg.h>
+
+struct omap_usb {
+	struct usb_phy		phy;
+	struct phy_companion	*comparator;
+	struct device		*dev;
+	u32 __iomem		*control_dev;
+	struct clk		*wkupclk;
+	u8			is_suspended:1;
+};
+
+#define	PHY_PD	0x1
+
+#define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
+
+#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
+extern int omap_usb2_set_comparator(struct phy_companion *comparator);
+#else
+static inline int omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __DRIVERS_OMAP_USB_H */
diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h
new file mode 100644
index 0000000..edd2ec2
--- /dev/null
+++ b/include/linux/usb/phy_companion.h
@@ -0,0 +1,34 @@ 
+/*
+ * phy-companion.h -- phy companion to indicate the comparator part of PHY
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_PHY_COMPANION_H
+#define __DRIVERS_PHY_COMPANION_H
+
+#include <linux/usb/otg.h>
+
+/* phy_companion to take care of VBUS, ID and srp capabilities */
+struct phy_companion {
+
+	/* effective for A-peripheral, ignored for B devices */
+	int	(*set_vbus)(struct phy_companion *x, bool enabled);
+
+	/* for B devices only:  start session with A-Host */
+	int	(*start_srp)(struct phy_companion *x);
+};
+
+#endif /* __DRIVERS_PHY_COMPANION_H */