diff mbox

[v6,1/3] drivers/mfd: Add realtek pcie card reader driver

Message ID b3b7a3d03d9591c1f393f4c4f488efbd15756c7c.1347330871.git.wei_wang@realsil.com.cn (mailing list archive)
State Not Applicable
Headers show

Commit Message

wei_wang@realsil.com.cn Sept. 11, 2012, 4:54 a.m. UTC
From: Wei WANG <wei_wang@realsil.com.cn>

Realtek PCI-E card reader driver adapts requests from upper-level
sdmmc/memstick layer to the real physical card reader.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Borislav Petkov <bp@alien8.de>
---
 drivers/mfd/Kconfig             |    9 +
 drivers/mfd/Makefile            |    4 +
 drivers/mfd/rts5209.c           |  188 ++++++
 drivers/mfd/rts5229.c           |  179 ++++++
 drivers/mfd/rtsx_pcr.c          | 1345 +++++++++++++++++++++++++++++++++++++++
 drivers/mfd/rtsx_pcr.h          |   31 +
 include/linux/mfd/rtsx_common.h |   47 ++
 include/linux/mfd/rtsx_pci.h    |  773 ++++++++++++++++++++++
 8 files changed, 2576 insertions(+)
 create mode 100644 drivers/mfd/rts5209.c
 create mode 100644 drivers/mfd/rts5229.c
 create mode 100644 drivers/mfd/rtsx_pcr.c
 create mode 100644 drivers/mfd/rtsx_pcr.h
 create mode 100644 include/linux/mfd/rtsx_common.h
 create mode 100644 include/linux/mfd/rtsx_pci.h

Comments

Samuel Ortiz Sept. 30, 2012, 10:49 p.m. UTC | #1
Hi Wei,

On Tue, Sep 11, 2012 at 12:54:22PM +0800, wei_wang@realsil.com.cn wrote:
> From: Wei WANG <wei_wang@realsil.com.cn>
> 
> Realtek PCI-E card reader driver adapts requests from upper-level
> sdmmc/memstick layer to the real physical card reader.
> 
> Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> Tested-by: Borislav Petkov <bp@alien8.de>
> ---
>  drivers/mfd/Kconfig             |    9 +
>  drivers/mfd/Makefile            |    4 +
>  drivers/mfd/rts5209.c           |  188 ++++++
>  drivers/mfd/rts5229.c           |  179 ++++++
>  drivers/mfd/rtsx_pcr.c          | 1345 +++++++++++++++++++++++++++++++++++++++
>  drivers/mfd/rtsx_pcr.h          |   31 +
>  include/linux/mfd/rtsx_common.h |   47 ++
>  include/linux/mfd/rtsx_pci.h    |  773 ++++++++++++++++++++++
>  8 files changed, 2576 insertions(+)
>  create mode 100644 drivers/mfd/rts5209.c
>  create mode 100644 drivers/mfd/rts5229.c
>  create mode 100644 drivers/mfd/rtsx_pcr.c
>  create mode 100644 drivers/mfd/rtsx_pcr.h
>  create mode 100644 include/linux/mfd/rtsx_common.h
>  create mode 100644 include/linux/mfd/rtsx_pci.h
Although  pretty big, the patch looks mostly good to me.
I only have a few comments:

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index d1facef..4c07a34 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -63,6 +63,15 @@ config MFD_SM501_GPIO
>  	 lines on the SM501. The platform data is used to supply the
>  	 base number for the first GPIO line to register.
>  
> +config MFD_RTSX_PCI
> +	tristate "Support for Realtek PCI-E driver-based card reader"
> +	depends on PCI
> +	help
> +	  This supports for Realtek PCI-Express driver-based card reader including
> +	  rts5209, rts5229, etc. Realtek driver-based card reader supports access
driver-based ?

> diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
> new file mode 100644
> index 0000000..6680d6d
> --- /dev/null
> +++ b/drivers/mfd/rts5209.c
> @@ -0,0 +1,188 @@
> +/* Driver for Realtek PCI-Express card reader
> + *
> + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2, or (at your option) any
> + * later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + *
> + * Author:
> + *   Wei WANG <wei_wang@realsil.com.cn>
> + *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mfd/rtsx_pci.h>
> +
> +#include "rtsx_pcr.h"
> +
> +static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
> +{
> +	u8 val;
> +
> +	val = rtsx_pci_readb(pcr, 0x1C);
> +	return val & 0x0F;
For your IO accesses, it would e worth looking at the regmap MMIO routines. It
would also simplify your main probe routine.


> +static int rts5209_turn_on_led(struct rtsx_pcr *pcr)
> +{
> +	return rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x00);
You have many hardcoded register adresses around this code. Defining them in
your header file wouldn't hurt.


> +static struct platform_device *rtsx_pci_create_subdev(struct rtsx_pcr *pcr,
> +		const char *name, int slot_id)
> +{
> +	struct platform_device *p_dev;
> +	int err;
> +
> +	p_dev = platform_device_alloc(name, pcr->id);
> +	if (p_dev == NULL) {
> +		dev_dbg(&(pcr->pci->dev), "alloc platform device fail!\n");
> +		return NULL;
> +	}
> +
> +	p_dev->dev.parent = &(pcr->pci->dev);
> +	platform_set_drvdata(p_dev, pcr);
> +	pcr->slots[slot_id].p_dev = p_dev;
> +
> +	err = platform_device_add(p_dev);
> +	if (err) {
> +		dev_dbg(&(pcr->pci->dev), "add platform device fail!\n");
> +		pcr->slots[slot_id].p_dev = NULL;
> +		platform_device_put(p_dev);
> +		return NULL;
> +	}
> +
> +	return p_dev;
> +}
Please use the MFD device addition API for that.


> +static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
> +{
> +	struct rtsx_pcr *pcr = dev_id;
> +	u32 int_reg;
> +
> +	if (!pcr)
> +		return IRQ_NONE;
> +
> +	spin_lock(&pcr->lock);
> +
> +	int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
> +	/* Clear interrupt flag */
> +	rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
> +	if ((int_reg & pcr->bier) == 0) {
> +		spin_unlock(&pcr->lock);
> +		return IRQ_NONE;
> +	}
> +	if (int_reg == 0xFFFFFFFF) {
> +		spin_unlock(&pcr->lock);
> +		return IRQ_HANDLED;
> +	}
> +
> +	int_reg &= (pcr->bier | 0x7FFFFF);
> +
> +	if (int_reg & SD_INT) {
> +		if (int_reg & SD_EXIST) {
> +			pcr->need_reset |= SD_EXIST;
> +		} else {
> +			pcr->need_release |= SD_EXIST;
> +			pcr->need_reset &= ~SD_EXIST;
> +		}
> +	}
> +
> +	if (int_reg & MS_INT) {
> +		if (int_reg & MS_EXIST) {
> +			pcr->need_reset |= MS_EXIST;
> +		} else {
> +			pcr->need_release |= MS_EXIST;
> +			pcr->need_reset &= ~MS_EXIST;
> +		}
> +	}
> +
> +	if (pcr->need_reset || pcr->need_release)
> +		queue_delayed_work(workqueue, &pcr->carddet_work,
> +				msecs_to_jiffies(200));
Why do we need a delayed work here ?


> +static void rtsx_pci_enter_idle(unsigned long __data)
> +{
> +	struct rtsx_pcr *pcr = (struct rtsx_pcr *)__data;
> +
> +	queue_work(workqueue, &pcr->idle_work);
> +}
OT: We need threaded timers...


> +static int __init rtsx_pci_drv_init(void)
> +{
> +	workqueue = create_freezable_workqueue("rtsx_pci_wq");
> +	if (!workqueue)
> +		return -ENOMEM;
Are you sure you really need to create your won workqueue ? My guess is that
you probably don't.

Cheers,
Samuel.
wei_wang@realsil.com.cn Oct. 6, 2012, 9:05 a.m. UTC | #2
? 2012?10?01? 06:49, Samuel Ortiz ??:
> Hi Wei,
>
> On Tue, Sep 11, 2012 at 12:54:22PM +0800, wei_wang@realsil.com.cn wrote:
> Although  pretty big, the patch looks mostly good to me.
> I only have a few comments:
>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index d1facef..4c07a34 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -63,6 +63,15 @@ config MFD_SM501_GPIO
>>  	 lines on the SM501. The platform data is used to supply the
>>  	 base number for the first GPIO line to register.
>>  
>> +config MFD_RTSX_PCI
>> +	tristate "Support for Realtek PCI-E driver-based card reader"
>> +	depends on PCI
>> +	help
>> +	  This supports for Realtek PCI-Express driver-based card reader including
>> +	  rts5209, rts5229, etc. Realtek driver-based card reader supports access
> driver-based ?

Sorry, this is our internal naming convention. We have two groups of
card reader, one group has embedded MCU and uses in-box driver, the
other hasn't MCU and uses vendor driver. So we call the first group as
"MCU-based reader", and the second group as "driver-based reader". This
naming convention may confuse others, I will modify the description.
>
>> +
>> +static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
>> +{
>> +	u8 val;
>> +
>> +	val = rtsx_pci_readb(pcr, 0x1C);
>> +	return val & 0x0F;
> For your IO accesses, it would e worth looking at the regmap MMIO routines. It
> would also simplify your main probe routine.

regmap MMIO is great. But I haven't used it before, and it seems that we
haven't enough time to test it in this short merge window. I will take
your advice and use these routines in the near future.
>
>> +static int rts5209_turn_on_led(struct rtsx_pcr *pcr)
>> +{
>> +	return rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x00);
> You have many hardcoded register adresses around this code. Defining them in
> your header file wouldn't hurt.

I will modify it soon.

>
>> +static struct platform_device *rtsx_pci_create_subdev(struct rtsx_pcr *pcr,
>> +		const char *name, int slot_id)
>> +{
>> +	struct platform_device *p_dev;
>> +	int err;
>> +
>> +	p_dev = platform_device_alloc(name, pcr->id);
>> +	if (p_dev == NULL) {
>> +		dev_dbg(&(pcr->pci->dev), "alloc platform device fail!\n");
>> +		return NULL;
>> +	}
>> +
>> +	p_dev->dev.parent = &(pcr->pci->dev);
>> +	platform_set_drvdata(p_dev, pcr);
>> +	pcr->slots[slot_id].p_dev = p_dev;
>> +
>> +	err = platform_device_add(p_dev);
>> +	if (err) {
>> +		dev_dbg(&(pcr->pci->dev), "add platform device fail!\n");
>> +		pcr->slots[slot_id].p_dev = NULL;
>> +		platform_device_put(p_dev);
>> +		return NULL;
>> +	}
>> +
>> +	return p_dev;
>> +}
> Please use the MFD device addition API for that.
>

You suggest using mfd_cell ? I have considered it, but it seems not very
flexible in my situation. I will create two sub devices in the driver,
one for SD/MMC card, the other for Memstick. I need to create the sub
device when the card inserted, and destroy it when the card removed. The
timing to create and destroy is totally up to the user.
But mfd_cell will create and destroy all of the sub devices at the same
time, using API mfd_add_devices and mfd_remove_devices, which can not
meet my desire.

>> +static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
>> +{
>> +	struct rtsx_pcr *pcr = dev_id;
>> +	u32 int_reg;
>> +
>> +	if (!pcr)
>> +		return IRQ_NONE;
>> +
>> +	spin_lock(&pcr->lock);
>> +
>> +	int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
>> +	/* Clear interrupt flag */
>> +	rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
>> +	if ((int_reg & pcr->bier) == 0) {
>> +		spin_unlock(&pcr->lock);
>> +		return IRQ_NONE;
>> +	}
>> +	if (int_reg == 0xFFFFFFFF) {
>> +		spin_unlock(&pcr->lock);
>> +		return IRQ_HANDLED;
>> +	}
>> +
>> +	int_reg &= (pcr->bier | 0x7FFFFF);
>> +
>> +	if (int_reg & SD_INT) {
>> +		if (int_reg & SD_EXIST) {
>> +			pcr->need_reset |= SD_EXIST;
>> +		} else {
>> +			pcr->need_release |= SD_EXIST;
>> +			pcr->need_reset &= ~SD_EXIST;
>> +		}
>> +	}
>> +
>> +	if (int_reg & MS_INT) {
>> +		if (int_reg & MS_EXIST) {
>> +			pcr->need_reset |= MS_EXIST;
>> +		} else {
>> +			pcr->need_release |= MS_EXIST;
>> +			pcr->need_reset &= ~MS_EXIST;
>> +		}
>> +	}
>> +
>> +	if (pcr->need_reset || pcr->need_release)
>> +		queue_delayed_work(workqueue, &pcr->carddet_work,
>> +				msecs_to_jiffies(200));
> Why do we need a delayed work here ?

We need a period of time to debounce the CD glitch, so I use a delayed
work here. After 200 milliseconds, I will check the CD signal again to
make sure this is a valid signal.

>
>> +static void rtsx_pci_enter_idle(unsigned long __data)
>> +{
>> +	struct rtsx_pcr *pcr = (struct rtsx_pcr *)__data;
>> +
>> +	queue_work(workqueue, &pcr->idle_work);
>> +}
> OT: We need threaded timers...
>

Sorry, I can't understand this...

>> +static int __init rtsx_pci_drv_init(void)
>> +{
>> +	workqueue = create_freezable_workqueue("rtsx_pci_wq");
>> +	if (!workqueue)
>> +		return -ENOMEM;
> Are you sure you really need to create your won workqueue ? My guess is that
> you probably don't.
I will modify it and make a full test.

BR,
Wei WANG
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d1facef..4c07a34 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -63,6 +63,15 @@  config MFD_SM501_GPIO
 	 lines on the SM501. The platform data is used to supply the
 	 base number for the first GPIO line to register.
 
+config MFD_RTSX_PCI
+	tristate "Support for Realtek PCI-E driver-based card reader"
+	depends on PCI
+	help
+	  This supports for Realtek PCI-Express driver-based card reader including
+	  rts5209, rts5229, etc. Realtek driver-based card reader supports access
+	  to many types of memory cards, such as Memory Stick, Memory Stick Pro,
+	  Secure Digital and MultiMediaCard.
+
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..e8cdc7b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -9,6 +9,9 @@  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 
+rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o
+obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
+
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
@@ -132,3 +135,4 @@  obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_ANATOP)	+= anatop-mfd.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
+obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
new file mode 100644
index 0000000..6680d6d
--- /dev/null
+++ b/drivers/mfd/rts5209.c
@@ -0,0 +1,188 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	val = rtsx_pci_readb(pcr, 0x1C);
+	return val & 0x0F;
+}
+
+static void rts5209_init_vendor_cfg(struct rtsx_pcr *pcr)
+{
+	u32 val;
+
+	rtsx_pci_read_config_dword(pcr, 0x724, &val);
+	dev_dbg(&(pcr->pci->dev), "Cfg 0x724: 0x%x\n", val);
+
+	if (!(val & 0x80)) {
+		if (val & 0x08)
+			pcr->ms_pmos = false;
+		else
+			pcr->ms_pmos = true;
+	}
+}
+
+static int rts5209_optimize_phy(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_phy_register(pcr, 0x00, 0xB966);
+}
+
+static int rts5209_turn_on_led(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x00);
+}
+
+static int rts5209_turn_off_led(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x01);
+}
+
+static int rts5209_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0xFF, 0x0D);
+}
+
+static int rts5209_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0x08, 0x00);
+}
+
+static const struct pcr_ops rts5209_pcr_ops = {
+	.extra_init_hw = NULL,
+	.optimize_phy = rts5209_optimize_phy,
+	.turn_on_led = rts5209_turn_on_led,
+	.turn_off_led = rts5209_turn_off_led,
+	.enable_auto_blink = rts5209_enable_auto_blink,
+	.disable_auto_blink = rts5209_disable_auto_blink,
+};
+
+/* SD Pull Control Enable:
+ *     SD_DAT[3:0] ==> pull up
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull up
+ *     SD_CMD      ==> pull up
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5209_sd_pull_ctl_enable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL1, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+	0,
+};
+
+/* SD Pull Control Disable:
+ *     SD_DAT[3:0] ==> pull down
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull down
+ *     SD_CMD      ==> pull down
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5209_sd_pull_ctl_disable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL1, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+	0,
+};
+
+/* MS Pull Control Enable:
+ *     MS CD       ==> pull up
+ *     others      ==> pull down
+ */
+static const u32 rts5209_ms_pull_ctl_enable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+	0,
+};
+
+/* MS Pull Control Disable:
+ *     MS CD       ==> pull up
+ *     others      ==> pull down
+ */
+static const u32 rts5209_ms_pull_ctl_disable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+	0,
+};
+
+static const struct pcr_reg_val rts5209_rval1 = {
+	.ldo_pwr_mask = LDO3318_PWR_MASK,
+	.ldo_pwr_on = 0x00,
+	.ldo_pwr_off = 0x06,
+	.ldo_pwr_suspend = 0x04,
+
+	.sd_pwr_mask = SD_POWER_MASK,
+	.sd_partial_pwr_on = SD_PARTIAL_POWER_ON,
+	.sd_pwr_on = SD_POWER_ON,
+	.sd_pwr_off = SD_POWER_OFF,
+
+	/* MS card also uses SD power here */
+	.ms_pwr_mask = SD_POWER_MASK,
+	.ms_partial_pwr_on = SD_PARTIAL_POWER_ON,
+	.ms_pwr_on = SD_POWER_ON,
+	.ms_pwr_off = SD_POWER_OFF,
+};
+
+static const struct pcr_reg_val rts5209_rval2 = {
+	.ldo_pwr_mask = LDO3318_PWR_MASK,
+	.ldo_pwr_on = 0x00,
+	.ldo_pwr_off = 0x06,
+	.ldo_pwr_suspend = 0x04,
+
+	.sd_pwr_mask = SD_POWER_MASK,
+	.sd_partial_pwr_on = SD_PARTIAL_POWER_ON,
+	.sd_pwr_on = SD_POWER_ON,
+	.sd_pwr_off = SD_POWER_OFF,
+
+	.ms_pwr_mask = MS_POWER_MASK,
+	.ms_partial_pwr_on = MS_PARTIAL_POWER_ON,
+	.ms_pwr_on = MS_POWER_ON,
+	.ms_pwr_off = MS_POWER_OFF,
+};
+
+void rts5209_init_params(struct rtsx_pcr *pcr)
+{
+	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 |
+		EXTRA_CAPS_SD_SDR104 | EXTRA_CAPS_MMC_8BIT;
+	pcr->num_slots = 2;
+	pcr->ops = &rts5209_pcr_ops;
+
+	rts5209_init_vendor_cfg(pcr);
+	if (pcr->ms_pmos)
+		pcr->rval = &rts5209_rval2;
+	else
+		pcr->rval = &rts5209_rval1;
+
+	pcr->ic_version = rts5209_get_ic_version(pcr);
+	pcr->sd_pull_ctl_enable_tbl = rts5209_sd_pull_ctl_enable_tbl;
+	pcr->sd_pull_ctl_disable_tbl = rts5209_sd_pull_ctl_disable_tbl;
+	pcr->ms_pull_ctl_enable_tbl = rts5209_ms_pull_ctl_enable_tbl;
+	pcr->ms_pull_ctl_disable_tbl = rts5209_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
new file mode 100644
index 0000000..b2d6b1f
--- /dev/null
+++ b/drivers/mfd/rts5229.c
@@ -0,0 +1,179 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	rtsx_pci_read_register(pcr, 0xFE90, &val);
+	return val & 0x0F;
+}
+
+static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
+{
+	rtsx_pci_init_cmd(pcr);
+
+	/* Switch LDO3318 source from DV33 to card_3v3 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFE78, 0x03, 0x00);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFE78, 0x03, 0x01);
+	/* LED shine disabled, set initial shine cycle period */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFC1E, 0x0F, 0x02);
+
+	return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5229_optimize_phy(struct rtsx_pcr *pcr)
+{
+	/* Optimize RX sensitivity */
+	return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
+}
+
+static int rts5229_turn_on_led(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, 0xFC1F, 0x02, 0x02);
+}
+
+static int rts5229_turn_off_led(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, 0xFC1F, 0x02, 0x00);
+}
+
+static int rts5229_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, 0xFC1E, 0x08, 0x08);
+}
+
+static int rts5229_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, 0xFC1E, 0x08, 0x00);
+}
+
+static const struct pcr_ops rts5229_pcr_ops = {
+	.extra_init_hw = rts5229_extra_init_hw,
+	.optimize_phy = rts5229_optimize_phy,
+	.turn_on_led = rts5229_turn_on_led,
+	.turn_off_led = rts5229_turn_off_led,
+	.enable_auto_blink = rts5229_enable_auto_blink,
+	.disable_auto_blink = rts5229_disable_auto_blink,
+};
+
+/* SD Pull Control Enable:
+ *     SD_DAT[3:0] ==> pull up
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull up
+ *     SD_CMD      ==> pull up
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5229_sd_pull_ctl_enable_tbl1[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+	0,
+};
+
+/* For RTS5229 version C */
+static const u32 rts5229_sd_pull_ctl_enable_tbl2[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD9),
+	0,
+};
+
+/* SD Pull Control Disable:
+ *     SD_DAT[3:0] ==> pull down
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull down
+ *     SD_CMD      ==> pull down
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5229_sd_pull_ctl_disable_tbl1[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+	0,
+};
+
+/* For RTS5229 version C */
+static const u32 rts5229_sd_pull_ctl_disable_tbl2[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE5),
+	0,
+};
+
+/* MS Pull Control Enable:
+ *     MS CD       ==> pull up
+ *     others      ==> pull down
+ */
+static const u32 rts5229_ms_pull_ctl_enable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+	0,
+};
+
+/* MS Pull Control Disable:
+ *     MS CD       ==> pull up
+ *     others      ==> pull down
+ */
+static const u32 rts5229_ms_pull_ctl_disable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+	0,
+};
+
+static const struct pcr_reg_val rts5229_rval = {
+	.ldo_pwr_mask = LDO3318_PWR_MASK,
+	.ldo_pwr_on = 0x06,
+	.ldo_pwr_off = 0x00,
+	.ldo_pwr_suspend = 0x02,
+
+	.sd_pwr_mask = SD_POWER_MASK,
+	.sd_partial_pwr_on = SD_PARTIAL_POWER_ON,
+	.sd_pwr_on = SD_POWER_ON,
+	.sd_pwr_off = SD_POWER_OFF,
+
+	/* MS card also uses SD power here */
+	.ms_pwr_mask = SD_POWER_MASK,
+	.ms_partial_pwr_on = SD_PARTIAL_POWER_ON,
+	.ms_pwr_on = SD_POWER_ON,
+	.ms_pwr_off = SD_POWER_OFF,
+};
+
+void rts5229_init_params(struct rtsx_pcr *pcr)
+{
+	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+	pcr->num_slots = 2;
+	pcr->ops = &rts5229_pcr_ops;
+	pcr->rval = &rts5229_rval;
+
+	pcr->ic_version = rts5229_get_ic_version(pcr);
+	if (pcr->ic_version == IC_VER_C) {
+		pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl2;
+		pcr->sd_pull_ctl_disable_tbl = rts5229_sd_pull_ctl_disable_tbl2;
+	} else {
+		pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl1;
+		pcr->sd_pull_ctl_disable_tbl = rts5229_sd_pull_ctl_disable_tbl1;
+	}
+	pcr->ms_pull_ctl_enable_tbl = rts5229_ms_pull_ctl_enable_tbl;
+	pcr->ms_pull_ctl_disable_tbl = rts5229_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
new file mode 100644
index 0000000..5f6a6b9
--- /dev/null
+++ b/drivers/mfd/rtsx_pcr.c
@@ -0,0 +1,1345 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/idr.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/rtsx_pci.h>
+#include <asm/unaligned.h>
+
+#include "rtsx_pcr.h"
+
+static bool msi_en = true;
+module_param(msi_en, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(msi_en, "Enable MSI");
+
+static struct workqueue_struct *workqueue;
+static DEFINE_IDR(rtsx_pci_idr);
+static DEFINE_SPINLOCK(rtsx_pci_lock);
+
+static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
+	{ PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, rtsx_pci_ids);
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr)
+{
+	/* If pci device removed, don't queue idle work any more */
+	if (pcr->remove_pci)
+		return;
+
+	if (pcr->state != PDEV_STAT_RUN) {
+		pcr->state = PDEV_STAT_RUN;
+		if (pcr->ops->enable_auto_blink)
+			pcr->ops->enable_auto_blink(pcr);
+	}
+
+	mod_timer(&pcr->idle_timer, jiffies + msecs_to_jiffies(200));
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_start_run);
+
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data)
+{
+	int i;
+	u32 val = HAIMR_WRITE_START;
+
+	val |= (u32)(addr & 0x3FFF) << 16;
+	val |= (u32)mask << 8;
+	val |= (u32)data;
+
+	rtsx_pci_writel(pcr, RTSX_HAIMR, val);
+
+	for (i = 0; i < MAX_RW_REG_CNT; i++) {
+		val = rtsx_pci_readl(pcr, RTSX_HAIMR);
+		if ((val & HAIMR_TRANS_END) == 0) {
+			if (data != (u8)val)
+				return -EIO;
+			return 0;
+		}
+	}
+
+	return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_register);
+
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
+{
+	u32 val = HAIMR_READ_START;
+	int i;
+
+	val |= (u32)(addr & 0x3FFF) << 16;
+	rtsx_pci_writel(pcr, RTSX_HAIMR, val);
+
+	for (i = 0; i < MAX_RW_REG_CNT; i++) {
+		val = rtsx_pci_readl(pcr, RTSX_HAIMR);
+		if ((val & HAIMR_TRANS_END) == 0)
+			break;
+	}
+
+	if (i >= MAX_RW_REG_CNT)
+		return -ETIMEDOUT;
+
+	if (data)
+		*data = (u8)(val & 0xFF);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
+
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
+{
+	int err, i, finished = 0;
+	u8 tmp;
+
+	rtsx_pci_init_cmd(pcr);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA0, 0xFF, (u8)val);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA1, 0xFF, (u8)(val >> 8));
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x81);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 100000; i++) {
+		err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
+		if (err < 0)
+			return err;
+
+		if (!(tmp & 0x80)) {
+			finished = 1;
+			break;
+		}
+	}
+
+	if (!finished)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
+
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
+{
+	int err, i, finished = 0;
+	u16 data;
+	u8 *ptr, tmp;
+
+	rtsx_pci_init_cmd(pcr);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x80);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 100000; i++) {
+		err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
+		if (err < 0)
+			return err;
+
+		if (!(tmp & 0x80)) {
+			finished = 1;
+			break;
+		}
+	}
+
+	if (!finished)
+		return -ETIMEDOUT;
+
+	rtsx_pci_init_cmd(pcr);
+
+	rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA0, 0, 0);
+	rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA1, 0, 0);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	ptr = rtsx_pci_get_cmd_data(pcr);
+	data = ((u16)ptr[1] << 8) | ptr[0];
+
+	if (val)
+		*val = data;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
+
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
+{
+	rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
+	rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
+
+	rtsx_pci_write_register(pcr, DMACTL, 0x80, 0x80);
+	rtsx_pci_write_register(pcr, RBCTL, 0x80, 0x80);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_stop_cmd);
+
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+		u8 cmd_type, u16 reg_addr, u8 mask, u8 data)
+{
+	unsigned long flags;
+	u32 val = 0;
+	u32 *ptr = (u32 *)(pcr->host_cmds_ptr);
+
+	val |= (u32)(cmd_type & 0x03) << 30;
+	val |= (u32)(reg_addr & 0x3FFF) << 16;
+	val |= (u32)mask << 8;
+	val |= (u32)data;
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	ptr += pcr->ci;
+	if (pcr->ci < (HOST_CMDS_BUF_LEN / 4)) {
+		put_unaligned_le32(val, ptr);
+		ptr++;
+		pcr->ci++;
+	}
+	spin_unlock_irqrestore(&pcr->lock, flags);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_add_cmd);
+
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr)
+{
+	u32 val = 1 << 31;
+
+	rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+	val |= (u32)(pcr->ci * 4) & 0x00FFFFFF;
+	/* Hardware Auto Response */
+	val |= 0x40000000;
+	rtsx_pci_writel(pcr, RTSX_HCBCTLR, val);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_send_cmd_no_wait);
+
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout)
+{
+	struct completion trans_done;
+	u32 val = 1 << 31;
+	long timeleft;
+	unsigned long flags;
+	int err = 0;
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	/* set up data structures for the wakeup system */
+	pcr->done = &trans_done;
+	pcr->trans_result = TRANS_NOT_READY;
+	init_completion(&trans_done);
+
+	rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+	val |= (u32)(pcr->ci * 4) & 0x00FFFFFF;
+	/* Hardware Auto Response */
+	val |= 0x40000000;
+	rtsx_pci_writel(pcr, RTSX_HCBCTLR, val);
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	/* Wait for TRANS_OK_INT */
+	timeleft = wait_for_completion_interruptible_timeout(
+			&trans_done, msecs_to_jiffies(timeout));
+	if (timeleft <= 0) {
+		dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+				__func__, __LINE__);
+		err = -ETIMEDOUT;
+		goto finish_send_cmd;
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	if (pcr->trans_result == TRANS_RESULT_FAIL)
+		err = -EINVAL;
+	else if (pcr->trans_result == TRANS_RESULT_OK)
+		err = 0;
+	else if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+finish_send_cmd:
+	spin_lock_irqsave(&pcr->lock, flags);
+	pcr->done = NULL;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	if ((err < 0) && (err != -ENODEV))
+		rtsx_pci_stop_cmd(pcr);
+
+	if (pcr->finish_me)
+		complete(pcr->finish_me);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_send_cmd);
+
+static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
+		dma_addr_t addr, unsigned int len, int end)
+{
+	u64 *ptr = (u64 *)(pcr->host_sg_tbl_ptr) + pcr->sgi;
+	u64 val;
+	u8 option = SG_VALID | SG_TRANS_DATA;
+
+	dev_dbg(&(pcr->pci->dev), "DMA addr: 0x%x, Len: 0x%x\n",
+			(unsigned int)addr, len);
+
+	if (end)
+		option |= SG_END;
+	val = ((u64)addr << 32) | ((u64)len << 12) | option;
+
+	put_unaligned_le64(val, ptr);
+	ptr++;
+	pcr->sgi++;
+}
+
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read, int timeout)
+{
+	struct completion trans_done;
+	u8 dir;
+	int err = 0, i, count;
+	long timeleft;
+	unsigned long flags;
+	struct scatterlist *sg;
+	enum dma_data_direction dma_dir;
+	u32 val;
+	dma_addr_t addr;
+	unsigned int len;
+
+	dev_dbg(&(pcr->pci->dev), "--> %s: num_sg = %d\n", __func__, num_sg);
+
+	/* don't transfer data during abort processing */
+	if (pcr->remove_pci)
+		return -EINVAL;
+
+	if ((sglist == NULL) || (num_sg <= 0))
+		return -EINVAL;
+
+	if (read) {
+		dir = DEVICE_TO_HOST;
+		dma_dir = DMA_FROM_DEVICE;
+	} else {
+		dir = HOST_TO_DEVICE;
+		dma_dir = DMA_TO_DEVICE;
+	}
+
+	count = dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+	if (count < 1) {
+		dev_err(&(pcr->pci->dev), "scatterlist map failed\n");
+		return -EINVAL;
+	}
+	dev_dbg(&(pcr->pci->dev), "DMA mapping count: %d\n", count);
+
+	val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE;
+	pcr->sgi = 0;
+	for_each_sg(sglist, sg, count, i) {
+		addr = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		rtsx_pci_add_sg_tbl(pcr, addr, len, i == count - 1);
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	pcr->done = &trans_done;
+	pcr->trans_result = TRANS_NOT_READY;
+	init_completion(&trans_done);
+	rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
+	rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	timeleft = wait_for_completion_interruptible_timeout(
+			&trans_done, msecs_to_jiffies(timeout));
+	if (timeleft <= 0) {
+		dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
+				__func__, __LINE__);
+		err = -ETIMEDOUT;
+		goto out;
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	if (pcr->trans_result == TRANS_RESULT_FAIL)
+		err = -EINVAL;
+	else if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+out:
+	spin_lock_irqsave(&pcr->lock, flags);
+	pcr->done = NULL;
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+
+	if ((err < 0) && (err != -ENODEV))
+		rtsx_pci_stop_cmd(pcr);
+
+	if (pcr->finish_me)
+		complete(pcr->finish_me);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_transfer_data);
+
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
+{
+	int err;
+	int i, j;
+	u16 reg;
+	u8 *ptr;
+
+	if (buf_len > 512)
+		buf_len = 512;
+
+	ptr = buf;
+	reg = PPBUF_BASE2;
+	for (i = 0; i < buf_len / 256; i++) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < 256; j++)
+			rtsx_pci_add_cmd(pcr, READ_REG_CMD, reg++, 0, 0);
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+
+		memcpy(ptr, rtsx_pci_get_cmd_data(pcr), 256);
+		ptr += 256;
+	}
+
+	if (buf_len % 256) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < buf_len % 256; j++)
+			rtsx_pci_add_cmd(pcr, READ_REG_CMD, reg++, 0, 0);
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+	}
+
+	memcpy(ptr, rtsx_pci_get_cmd_data(pcr), buf_len % 256);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_read_ppbuf);
+
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
+{
+	int err;
+	int i, j;
+	u16 reg;
+	u8 *ptr;
+
+	if (buf_len > 512)
+		buf_len = 512;
+
+	ptr = buf;
+	reg = PPBUF_BASE2;
+	for (i = 0; i < buf_len / 256; i++) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < 256; j++) {
+			rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+					reg++, 0xFF, *ptr);
+			ptr++;
+		}
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+	}
+
+	if (buf_len % 256) {
+		rtsx_pci_init_cmd(pcr);
+
+		for (j = 0; j < buf_len % 256; j++) {
+			rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+					reg++, 0xFF, *ptr);
+			ptr++;
+		}
+
+		err = rtsx_pci_send_cmd(pcr, 250);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_write_ppbuf);
+
+static int rtsx_pci_set_pull_ctl(struct rtsx_pcr *pcr, const u32 *tbl)
+{
+	int err;
+
+	rtsx_pci_init_cmd(pcr);
+
+	while (*tbl & 0xFFFF0000) {
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+				(u16)(*tbl >> 16), 0xFF, (u8)(*tbl));
+		tbl++;
+	}
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card)
+{
+	const u32 *tbl;
+
+	if (card == RTSX_SD_CARD)
+		tbl = pcr->sd_pull_ctl_enable_tbl;
+	else if (card == RTSX_MS_CARD)
+		tbl = pcr->ms_pull_ctl_enable_tbl;
+	else
+		return -EINVAL;
+
+	return rtsx_pci_set_pull_ctl(pcr, tbl);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_pull_ctl_enable);
+
+int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card)
+{
+	const u32 *tbl;
+
+	if (card == RTSX_SD_CARD)
+		tbl = pcr->sd_pull_ctl_disable_tbl;
+	else if (card == RTSX_MS_CARD)
+		tbl = pcr->ms_pull_ctl_disable_tbl;
+	else
+		return -EINVAL;
+
+
+	return rtsx_pci_set_pull_ctl(pcr, tbl);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_pull_ctl_disable);
+
+static void rtsx_pci_enable_bus_int(struct rtsx_pcr *pcr)
+{
+	pcr->bier = TRANS_OK_INT_EN | TRANS_FAIL_INT_EN | SD_INT_EN;
+
+	if (pcr->num_slots > 1)
+		pcr->bier |= MS_INT_EN;
+
+	/* Enable Bus Interrupt */
+	rtsx_pci_writel(pcr, RTSX_BIER, pcr->bier);
+
+	dev_dbg(&(pcr->pci->dev), "RTSX_BIER: 0x%08x\n", pcr->bier);
+}
+
+static inline u8 double_ssc_depth(u8 depth)
+{
+	return ((depth > 1) ? (depth - 1) : depth);
+}
+
+static u8 revise_ssc_depth(u8 ssc_depth, u8 div)
+{
+	if (div > CLK_DIV_1) {
+		if (ssc_depth > (div - 1))
+			ssc_depth -= (div - 1);
+		else
+			ssc_depth = SSC_DEPTH_4M;
+	}
+
+	return ssc_depth;
+}
+
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
+{
+	int err, clk;
+	u8 N, min_N, max_N, clk_divider;
+	u8 mcu_cnt, div, max_div;
+	u8 depth[] = {
+		[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
+		[RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M,
+		[RTSX_SSC_DEPTH_1M] = SSC_DEPTH_1M,
+		[RTSX_SSC_DEPTH_500K] = SSC_DEPTH_500K,
+		[RTSX_SSC_DEPTH_250K] = SSC_DEPTH_250K,
+	};
+
+	if (initial_mode) {
+		/* We use 250k(around) here, in initial stage */
+		clk_divider = SD_CLK_DIVIDE_128;
+		card_clock = 30000000;
+	} else {
+		clk_divider = SD_CLK_DIVIDE_0;
+	}
+	err = rtsx_pci_write_register(pcr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, clk_divider);
+	if (err < 0)
+		return err;
+
+	card_clock /= 1000000;
+	dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
+
+	min_N = 80;
+	max_N = 208;
+	max_div = CLK_DIV_8;
+
+	clk = card_clock;
+	if (!initial_mode && double_clk)
+		clk = card_clock * 2;
+	dev_dbg(&(pcr->pci->dev),
+			"Internal SSC clock: %dMHz (cur_clock = %d)\n",
+			clk, pcr->cur_clock);
+
+	if (clk == pcr->cur_clock)
+		return 0;
+
+	N = (u8)(clk - 2);
+	if ((clk <= 2) || (N > max_N))
+		return -EINVAL;
+
+	mcu_cnt = (u8)(125/clk + 3);
+	if (mcu_cnt > 15)
+		mcu_cnt = 15;
+
+	/* Make sure that the SSC clock div_n is equal or greater than min_N */
+	div = CLK_DIV_1;
+	while ((N < min_N) && (div < max_div)) {
+		N = (N + 2) * 2 - 2;
+		div++;
+	}
+	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
+
+	ssc_depth = depth[ssc_depth];
+	if (double_clk)
+		ssc_depth = double_ssc_depth(ssc_depth);
+
+	ssc_depth = revise_ssc_depth(ssc_depth, div);
+	dev_dbg(&(pcr->pci->dev), "ssc_depth = %d\n", ssc_depth);
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+			CLK_LOW_FREQ, CLK_LOW_FREQ);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV,
+			0xFF, (div << 4) | mcu_cnt);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
+			SSC_DEPTH_MASK, ssc_depth);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
+	if (vpclk) {
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				PHASE_NOT_RESET, 0);
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				PHASE_NOT_RESET, PHASE_NOT_RESET);
+	}
+
+	err = rtsx_pci_send_cmd(pcr, 2000);
+	if (err < 0)
+		return err;
+
+	/* Wait SSC clock stable */
+	udelay(10);
+	err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
+	if (err < 0)
+		return err;
+
+	pcr->cur_clock = clk;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_switch_clock);
+
+int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+	int err;
+	u8 pwr_mask, partial_pwr_on, pwr_on;
+
+	if (card == RTSX_SD_CARD) {
+		pwr_mask = pcr->rval->sd_pwr_mask;
+		partial_pwr_on = pcr->rval->sd_partial_pwr_on;
+		pwr_on = pcr->rval->sd_pwr_on;
+	} else if (card == RTSX_MS_CARD) {
+		pwr_mask = pcr->rval->ms_pwr_mask;
+		partial_pwr_on = pcr->rval->ms_partial_pwr_on;
+		pwr_on = pcr->rval->ms_pwr_on;
+	} else {
+		return -EINVAL;
+	}
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+			pwr_mask, partial_pwr_on);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+			pcr->rval->ldo_pwr_mask, pcr->rval->ldo_pwr_suspend);
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	/* To avoid too large in-rush current */
+	udelay(150);
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, pwr_mask, pwr_on);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+			pcr->rval->ldo_pwr_mask, pcr->rval->ldo_pwr_on);
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_power_on);
+
+int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+	u8 pwr_mask, pwr_off;
+
+	if (card == RTSX_SD_CARD) {
+		pwr_mask = pcr->rval->sd_pwr_mask;
+		pwr_off = pcr->rval->sd_pwr_off;
+	} else if (card == RTSX_MS_CARD) {
+		pwr_mask = pcr->rval->ms_pwr_mask;
+		pwr_off = pcr->rval->ms_pwr_off;
+	} else {
+		return -EINVAL;
+	}
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+			pwr_mask | PMOS_STRG_MASK, pwr_off | PMOS_STRG_400mA);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+			pcr->rval->ldo_pwr_mask, pcr->rval->ldo_pwr_off);
+	return rtsx_pci_send_cmd(pcr, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off);
+
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr)
+{
+	struct completion finish;
+
+	pcr->finish_me = &finish;
+	init_completion(&finish);
+
+	if (pcr->done)
+		complete(pcr->done);
+
+	if (!pcr->remove_pci)
+		rtsx_pci_stop_cmd(pcr);
+
+	wait_for_completion_interruptible_timeout(&finish,
+			msecs_to_jiffies(2));
+	pcr->finish_me = NULL;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_complete_unfinished_transfer);
+
+static struct platform_device *rtsx_pci_create_subdev(struct rtsx_pcr *pcr,
+		const char *name, int slot_id)
+{
+	struct platform_device *p_dev;
+	int err;
+
+	p_dev = platform_device_alloc(name, pcr->id);
+	if (p_dev == NULL) {
+		dev_dbg(&(pcr->pci->dev), "alloc platform device fail!\n");
+		return NULL;
+	}
+
+	p_dev->dev.parent = &(pcr->pci->dev);
+	platform_set_drvdata(p_dev, pcr);
+	pcr->slots[slot_id].p_dev = p_dev;
+
+	err = platform_device_add(p_dev);
+	if (err) {
+		dev_dbg(&(pcr->pci->dev), "add platform device fail!\n");
+		pcr->slots[slot_id].p_dev = NULL;
+		platform_device_put(p_dev);
+		return NULL;
+	}
+
+	return p_dev;
+}
+
+static void rtsx_pci_card_detect(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct rtsx_pcr *pcr;
+	unsigned long flags;
+	u32 irq_status;
+
+	dwork = to_delayed_work(work);
+	pcr = container_of(dwork, struct rtsx_pcr, carddet_work);
+
+	dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	irq_status = rtsx_pci_readl(pcr, RTSX_BIPR);
+	dev_dbg(&(pcr->pci->dev), "irq_status: 0x%08x\n", irq_status);
+
+	if (pcr->need_release) {
+		/* Card unplugged */
+		dev_dbg(&(pcr->pci->dev), "need_release: 0x%x\n",
+				pcr->need_release);
+
+		if (pcr->need_release & SD_EXIST) {
+			pcr->need_release &= ~SD_EXIST;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+			if (pcr->slots[RTSX_SD_CARD].p_dev) {
+				platform_device_unregister(
+					pcr->slots[RTSX_SD_CARD].p_dev);
+				pcr->slots[RTSX_SD_CARD].p_dev = NULL;
+			}
+			spin_lock_irqsave(&pcr->lock, flags);
+		}
+
+		if (pcr->need_release & MS_EXIST) {
+			pcr->need_release &= ~MS_EXIST;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+			if (pcr->slots[RTSX_MS_CARD].p_dev) {
+				platform_device_unregister(
+					pcr->slots[RTSX_MS_CARD].p_dev);
+				pcr->slots[RTSX_MS_CARD].p_dev = NULL;
+			}
+			spin_lock_irqsave(&pcr->lock, flags);
+		}
+	}
+
+	if (pcr->need_reset) {
+		/* Card plugged in */
+		pcr->need_reset &= irq_status;
+		if (!pcr->need_reset)
+			goto out;
+
+		dev_dbg(&(pcr->pci->dev), "need_reset: 0x%x\n",
+				pcr->need_reset);
+
+		if (pcr->need_reset & SD_EXIST) {
+			pcr->need_reset &= ~SD_EXIST;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+
+			pcr->slots[RTSX_SD_CARD].p_dev =
+				rtsx_pci_create_subdev(pcr,
+					DRV_NAME_RTSX_PCI_SDMMC, RTSX_SD_CARD);
+
+			spin_lock_irqsave(&pcr->lock, flags);
+		}
+
+		if (pcr->need_reset & MS_EXIST) {
+			pcr->need_reset &= ~MS_EXIST;
+			spin_unlock_irqrestore(&pcr->lock, flags);
+
+			pcr->slots[RTSX_MS_CARD].p_dev =
+				rtsx_pci_create_subdev(pcr,
+					DRV_NAME_RTSX_PCI_MS, RTSX_MS_CARD);
+
+			spin_lock_irqsave(&pcr->lock, flags);
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&pcr->lock, flags);
+}
+
+static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
+{
+	struct rtsx_pcr *pcr = dev_id;
+	u32 int_reg;
+
+	if (!pcr)
+		return IRQ_NONE;
+
+	spin_lock(&pcr->lock);
+
+	int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
+	/* Clear interrupt flag */
+	rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
+	if ((int_reg & pcr->bier) == 0) {
+		spin_unlock(&pcr->lock);
+		return IRQ_NONE;
+	}
+	if (int_reg == 0xFFFFFFFF) {
+		spin_unlock(&pcr->lock);
+		return IRQ_HANDLED;
+	}
+
+	int_reg &= (pcr->bier | 0x7FFFFF);
+
+	if (int_reg & SD_INT) {
+		if (int_reg & SD_EXIST) {
+			pcr->need_reset |= SD_EXIST;
+		} else {
+			pcr->need_release |= SD_EXIST;
+			pcr->need_reset &= ~SD_EXIST;
+		}
+	}
+
+	if (int_reg & MS_INT) {
+		if (int_reg & MS_EXIST) {
+			pcr->need_reset |= MS_EXIST;
+		} else {
+			pcr->need_release |= MS_EXIST;
+			pcr->need_reset &= ~MS_EXIST;
+		}
+	}
+
+	if (pcr->need_reset || pcr->need_release)
+		queue_delayed_work(workqueue, &pcr->carddet_work,
+				msecs_to_jiffies(200));
+
+	if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) {
+		if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) {
+			pcr->trans_result = TRANS_RESULT_FAIL;
+			if (pcr->done)
+				complete(pcr->done);
+		} else if (int_reg & TRANS_OK_INT) {
+			pcr->trans_result = TRANS_RESULT_OK;
+			if (pcr->done)
+				complete(pcr->done);
+		}
+	}
+
+	spin_unlock(&pcr->lock);
+	return IRQ_HANDLED;
+}
+
+static int rtsx_pci_acquire_irq(struct rtsx_pcr *pcr)
+{
+	dev_info(&(pcr->pci->dev), "%s: pcr->msi_en = %d, pci->irq = %d\n",
+			__func__, pcr->msi_en, pcr->pci->irq);
+
+	if (request_irq(pcr->pci->irq, rtsx_pci_isr,
+			pcr->msi_en ? 0 : IRQF_SHARED,
+			DRV_NAME_RTSX_PCI, pcr)) {
+		dev_err(&(pcr->pci->dev),
+			"rtsx_sdmmc: unable to grab IRQ %d, disabling device\n",
+			pcr->pci->irq);
+		return -1;
+	}
+
+	pcr->irq = pcr->pci->irq;
+	pci_intx(pcr->pci, !pcr->msi_en);
+
+	return 0;
+}
+
+static void rtsx_pci_enter_idle(unsigned long __data)
+{
+	struct rtsx_pcr *pcr = (struct rtsx_pcr *)__data;
+
+	queue_work(workqueue, &pcr->idle_work);
+}
+
+static void rtsx_pci_idle_work(struct work_struct *work)
+{
+	struct rtsx_pcr *pcr = container_of(work, struct rtsx_pcr, idle_work);
+
+	dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+
+	mutex_lock(&pcr->pcr_mutex);
+
+	pcr->state = PDEV_STAT_IDLE;
+
+	if (pcr->ops->disable_auto_blink)
+		pcr->ops->disable_auto_blink(pcr);
+	if (pcr->ops->turn_off_led)
+		pcr->ops->turn_off_led(pcr);
+
+	mutex_unlock(&pcr->pcr_mutex);
+}
+
+static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
+
+	rtsx_pci_enable_bus_int(pcr);
+
+	/* Power on SSC */
+	err = rtsx_pci_write_register(pcr, FPDCTL, SSC_POWER_DOWN, 0);
+	if (err < 0)
+		return err;
+
+	/* Wait SSC power stable */
+	udelay(200);
+
+	if (pcr->ops->optimize_phy) {
+		err = pcr->ops->optimize_phy(pcr);
+		if (err < 0)
+			return err;
+	}
+
+	rtsx_pci_init_cmd(pcr);
+
+	/* Set mcu_cnt to 7 to ensure data can be sampled properly */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV, 0x07, 0x07);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, HOST_SLEEP_STATE, 0x03, 0x00);
+	/* Disable card clock */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, 0x1E, 0);
+	/* Reset ASPM state to default value */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+	/* Card driving select */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+			SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+	/* Enlarge the estimation window of PERST# glitch
+	 * to reduce the chance of invalid card interrupt
+	 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PERST_GLITCH_WIDTH, 0xFF, 0x80);
+	/* Update RC oscillator to 400k
+	 * bit[0] F_HIGH: for RC oscillator, Rst_value is 1'b1
+	 *                1: 2M  0: 400k
+	 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, RCCTL, 0x01, 0x00);
+	/* Set interrupt write clear
+	 * bit 1: U_elbi_if_rd_clr_en
+	 *	1: Enable ELBI interrupt[31:22] & [7:0] flag read clear
+	 *	0: ELBI interrupt flag[31:22] & [7:0] only can be write clear
+	 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, NFTS_TX_CTRL, 0x02, 0);
+	/* Force CLKREQ# PIN to drive 0 to request clock */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
+
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	if (pcr->ops->extra_init_hw) {
+		err = pcr->ops->extra_init_hw(pcr);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
+{
+	int err;
+	u32 irq_status;
+
+	spin_lock_init(&pcr->lock);
+	mutex_init(&pcr->pcr_mutex);
+
+	switch (PCI_PID(pcr)) {
+	default:
+	case 0x5209:
+		rts5209_init_params(pcr);
+		break;
+
+	case 0x5229:
+		rts5229_init_params(pcr);
+		break;
+	}
+
+	dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
+			PCI_PID(pcr), pcr->ic_version);
+
+	pcr->slots = kcalloc(pcr->num_slots, sizeof(struct rtsx_slot),
+			GFP_KERNEL);
+	if (!pcr->slots)
+		return -ENOMEM;
+
+	pcr->state = PDEV_STAT_IDLE;
+	err = rtsx_pci_init_hw(pcr);
+	if (err < 0) {
+		kfree(pcr->slots);
+		return err;
+	}
+
+	irq_status = rtsx_pci_readl(pcr, RTSX_BIPR);
+	/* Clear interrupt flag */
+	rtsx_pci_writel(pcr, RTSX_BIPR, irq_status);
+	if (irq_status & SD_EXIST)
+		pcr->need_reset |= SD_EXIST;
+	if (irq_status & MS_EXIST)
+		pcr->need_reset |= MS_EXIST;
+
+	if (pcr->need_reset)
+		queue_delayed_work(workqueue, &pcr->carddet_work, 0);
+
+	return 0;
+}
+
+static int __devinit rtsx_pci_probe(struct pci_dev *pcidev,
+				    const struct pci_device_id *id)
+{
+	struct rtsx_pcr *pcr;
+	u32 base, len;
+	int ret;
+
+	dev_dbg(&(pcidev->dev),
+		": Realtek PCI-E Card Reader found at %s [%04x:%04x] (rev %x)\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+		(int)pcidev->revision);
+
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pcidev, DRV_NAME_RTSX_PCI);
+	if (ret)
+		goto disable;
+
+	pcr = kzalloc(sizeof(*pcr), GFP_KERNEL);
+	if (!pcr) {
+		ret = -ENOMEM;
+		goto release_pci;
+	}
+
+	if (!idr_pre_get(&rtsx_pci_idr, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto free_pcr;
+	}
+
+	spin_lock(&rtsx_pci_lock);
+	ret = idr_get_new(&rtsx_pci_idr, pcr, &pcr->id);
+	spin_unlock(&rtsx_pci_lock);
+	if (ret)
+		goto free_pcr;
+
+	pcr->pci = pcidev;
+	dev_set_drvdata(&pcidev->dev, pcr);
+
+	len = pci_resource_len(pcidev, 0);
+	base = pci_resource_start(pcidev, 0);
+	pcr->remap_addr = ioremap_nocache(base, len);
+	if (!pcr->remap_addr) {
+		ret = -ENOMEM;
+		goto free_host;
+	}
+
+	pcr->rtsx_resv_buf = dma_alloc_coherent(&(pcidev->dev),
+			RTSX_RESV_BUF_LEN, &(pcr->rtsx_resv_buf_addr),
+			GFP_KERNEL);
+	if (pcr->rtsx_resv_buf == NULL) {
+		ret = -ENXIO;
+		goto unmap;
+	}
+	pcr->host_cmds_ptr = pcr->rtsx_resv_buf;
+	pcr->host_cmds_addr = pcr->rtsx_resv_buf_addr;
+	pcr->host_sg_tbl_ptr = pcr->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
+	pcr->host_sg_tbl_addr = pcr->rtsx_resv_buf_addr + HOST_CMDS_BUF_LEN;
+
+	pcr->need_reset = 0;
+	pcr->need_release = 0;
+	INIT_DELAYED_WORK(&pcr->carddet_work, rtsx_pci_card_detect);
+	INIT_WORK(&pcr->idle_work, rtsx_pci_idle_work);
+	init_timer(&pcr->idle_timer);
+
+	pcr->msi_en = msi_en;
+	if (pcr->msi_en) {
+		ret = pci_enable_msi(pcidev);
+		if (ret < 0)
+			pcr->msi_en = false;
+	}
+
+	ret = rtsx_pci_acquire_irq(pcr);
+	if (ret < 0)
+		goto free_dma;
+
+	pci_set_master(pcidev);
+	synchronize_irq(pcr->irq);
+
+	ret = rtsx_pci_init_chip(pcr);
+	if (ret < 0)
+		goto disable_irq;
+
+	pcr->idle_timer.expires = jiffies + msecs_to_jiffies(200);
+	pcr->idle_timer.data = (unsigned long)pcr;
+	pcr->idle_timer.function = rtsx_pci_enter_idle;
+	add_timer(&pcr->idle_timer);
+
+	return 0;
+
+disable_irq:
+	free_irq(pcr->irq, (void *)pcr);
+free_dma:
+	dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
+			pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
+unmap:
+	iounmap(pcr->remap_addr);
+free_host:
+	dev_set_drvdata(&pcidev->dev, NULL);
+free_pcr:
+	kfree(pcr);
+release_pci:
+	pci_release_regions(pcidev);
+disable:
+	pci_disable_device(pcidev);
+
+	return ret;
+}
+
+static void __devexit rtsx_pci_remove(struct pci_dev *pcidev)
+{
+	struct rtsx_pcr *pcr = pci_get_drvdata(pcidev);
+	int i;
+
+	pcr->remove_pci = true;
+
+	flush_workqueue(workqueue);
+	cancel_delayed_work(&pcr->carddet_work);
+	del_timer_sync(&pcr->idle_timer);
+
+	for (i = 0; i < pcr->num_slots; i++) {
+		if (pcr->slots[i].p_dev) {
+			platform_device_unregister(pcr->slots[i].p_dev);
+			pcr->slots[i].p_dev = NULL;
+		}
+	}
+
+	dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
+			pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
+	free_irq(pcr->irq, (void *)pcr);
+	if (pcr->msi_en)
+		pci_disable_msi(pcr->pci);
+	iounmap(pcr->remap_addr);
+
+	dev_set_drvdata(&pcidev->dev, NULL);
+	pci_release_regions(pcidev);
+	pci_disable_device(pcidev);
+
+	spin_lock(&rtsx_pci_lock);
+	idr_remove(&rtsx_pci_idr, pcr->id);
+	spin_unlock(&rtsx_pci_lock);
+
+	kfree(pcr->slots);
+	kfree(pcr);
+
+	dev_dbg(&(pcidev->dev),
+		": Realtek PCI-E Card Reader at %s [%04x:%04x] has been removed\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+}
+
+#ifdef CONFIG_PM
+
+static int rtsx_pci_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+	struct rtsx_pcr *pcr;
+	int ret = 0;
+
+	dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
+
+	pcr = pci_get_drvdata(pcidev);
+
+	flush_workqueue(workqueue);
+	cancel_delayed_work(&pcr->carddet_work);
+	del_timer_sync(&pcr->idle_timer);
+
+	mutex_lock(&pcr->pcr_mutex);
+
+	if (pcr->ops->turn_off_led)
+		pcr->ops->turn_off_led(pcr);
+
+	rtsx_pci_writel(pcr, RTSX_BIER, 0);
+	pcr->bier = 0;
+
+	rtsx_pci_write_register(pcr, PETXCFG, 0x08, 0x08);
+	rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x02);
+
+	pci_save_state(pcidev);
+	pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+	pci_disable_device(pcidev);
+	pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+	mutex_unlock(&pcr->pcr_mutex);
+	return ret;
+}
+
+static int rtsx_pci_resume(struct pci_dev *pcidev)
+{
+	struct rtsx_pcr *pcr;
+	int ret = 0;
+
+	dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
+
+	pcr = pci_get_drvdata(pcidev);
+
+	mutex_lock(&pcr->pcr_mutex);
+
+	pci_set_power_state(pcidev, PCI_D0);
+	pci_restore_state(pcidev);
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		goto out;
+	pci_set_master(pcidev);
+
+	ret = rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x00);
+	if (ret)
+		goto out;
+
+	ret = rtsx_pci_init_hw(pcr);
+	if (ret)
+		goto out;
+
+	pcr->idle_timer.expires = jiffies + msecs_to_jiffies(200);
+	add_timer(&pcr->idle_timer);
+
+out:
+	mutex_unlock(&pcr->pcr_mutex);
+	return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define rtsx_pci_suspend NULL
+#define rtsx_pci_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver rtsx_pci_driver = {
+	.name = DRV_NAME_RTSX_PCI,
+	.id_table = rtsx_pci_ids,
+	.probe = rtsx_pci_probe,
+	.remove = __devexit_p(rtsx_pci_remove),
+	.suspend = rtsx_pci_suspend,
+	.resume = rtsx_pci_resume,
+};
+
+static int __init rtsx_pci_drv_init(void)
+{
+	workqueue = create_freezable_workqueue("rtsx_pci_wq");
+	if (!workqueue)
+		return -ENOMEM;
+
+	return pci_register_driver(&rtsx_pci_driver);
+}
+
+static void __exit rtsx_pci_drv_exit(void)
+{
+	pci_unregister_driver(&rtsx_pci_driver);
+	destroy_workqueue(workqueue);
+}
+
+module_init(rtsx_pci_drv_init);
+module_exit(rtsx_pci_drv_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wei WANG <wei_wang@realsil.com.cn>");
+MODULE_DESCRIPTION("Realtek PCI-E Card Reader Driver");
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
new file mode 100644
index 0000000..0a56b39
--- /dev/null
+++ b/drivers/mfd/rtsx_pcr.h
@@ -0,0 +1,31 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_PCR_H
+#define __RTSX_PCR_H
+
+#include <linux/mfd/rtsx_pci.h>
+
+void rts5209_init_params(struct rtsx_pcr *pcr);
+void rts5229_init_params(struct rtsx_pcr *pcr);
+
+#endif
diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h
new file mode 100644
index 0000000..67bc334
--- /dev/null
+++ b/include/linux/mfd/rtsx_common.h
@@ -0,0 +1,47 @@ 
+/* Driver for Realtek driver-based card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_COMMON_H
+#define __RTSX_COMMON_H
+
+#define DRV_NAME_RTSX_PCI		"rtsx_pci"
+#define DRV_NAME_RTSX_PCI_SDMMC		"rtsx_pci_sdmmc"
+#define DRV_NAME_RTSX_PCI_MS		"rtsx_pci_ms"
+
+#define RTSX_REG_PAIR(addr, val)	(((u32)(addr) << 16) | (u8)(val))
+
+#define RTSX_SSC_DEPTH_4M		0x01
+#define RTSX_SSC_DEPTH_2M		0x02
+#define RTSX_SSC_DEPTH_1M		0x03
+#define RTSX_SSC_DEPTH_500K		0x04
+#define RTSX_SSC_DEPTH_250K		0x05
+
+#define RTSX_SD_CARD			0
+#define RTSX_MS_CARD			1
+
+struct platform_device;
+
+struct rtsx_slot {
+	struct platform_device		*p_dev;
+};
+
+#endif
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
new file mode 100644
index 0000000..9b603e0
--- /dev/null
+++ b/include/linux/mfd/rtsx_pci.h
@@ -0,0 +1,773 @@ 
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#ifndef __RTSX_PCI_H
+#define __RTSX_PCI_H
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+
+#include "rtsx_common.h"
+
+#define MAX_RW_REG_CNT			1024
+
+/* PCI Operation Register Address */
+#define RTSX_HCBAR			0x00
+#define RTSX_HCBCTLR			0x04
+#define RTSX_HDBAR			0x08
+#define RTSX_HDBCTLR			0x0C
+#define RTSX_HAIMR			0x10
+#define RTSX_BIPR			0x14
+#define RTSX_BIER			0x18
+
+/* Host command buffer control register */
+#define STOP_CMD			(0x01 << 28)
+
+/* Host data buffer control register */
+#define SDMA_MODE			0x00
+#define ADMA_MODE			(0x02 << 26)
+#define STOP_DMA			(0x01 << 28)
+#define TRIG_DMA			(0x01 << 31)
+
+/* Host access internal memory register */
+#define HAIMR_TRANS_START		(0x01 << 31)
+#define HAIMR_READ			0x00
+#define HAIMR_WRITE			(0x01 << 30)
+#define HAIMR_READ_START		(HAIMR_TRANS_START | HAIMR_READ)
+#define HAIMR_WRITE_START		(HAIMR_TRANS_START | HAIMR_WRITE)
+#define HAIMR_TRANS_END			(HAIMR_TRANS_START)
+
+/* Bus interrupt pending register */
+#define CMD_DONE_INT			(1 << 31)
+#define DATA_DONE_INT			(1 << 30)
+#define TRANS_OK_INT			(1 << 29)
+#define TRANS_FAIL_INT			(1 << 28)
+#define XD_INT				(1 << 27)
+#define MS_INT				(1 << 26)
+#define SD_INT				(1 << 25)
+#define GPIO0_INT			(1 << 24)
+#define OC_INT				(1 << 23)
+#define SD_WRITE_PROTECT		(1 << 19)
+#define XD_EXIST			(1 << 18)
+#define MS_EXIST			(1 << 17)
+#define SD_EXIST			(1 << 16)
+#define DELINK_INT			GPIO0_INT
+#define MS_OC_INT			(1 << 23)
+#define SD_OC_INT			(1 << 22)
+
+#define CARD_INT		(XD_INT | MS_INT | SD_INT)
+#define NEED_COMPLETE_INT	(DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
+#define RTSX_INT		(CMD_DONE_INT | NEED_COMPLETE_INT | \
+					CARD_INT | GPIO0_INT | OC_INT)
+
+#define CARD_EXIST		(XD_EXIST | MS_EXIST | SD_EXIST)
+
+/* Bus interrupt enable register */
+#define CMD_DONE_INT_EN		(1 << 31)
+#define DATA_DONE_INT_EN	(1 << 30)
+#define TRANS_OK_INT_EN		(1 << 29)
+#define TRANS_FAIL_INT_EN	(1 << 28)
+#define XD_INT_EN		(1 << 27)
+#define MS_INT_EN		(1 << 26)
+#define SD_INT_EN		(1 << 25)
+#define GPIO0_INT_EN		(1 << 24)
+#define OC_INT_EN		(1 << 23)
+#define DELINK_INT_EN		GPIO0_INT_EN
+#define MS_OC_INT_EN		(1 << 23)
+#define SD_OC_INT_EN		(1 << 22)
+
+#define READ_REG_CMD		0
+#define WRITE_REG_CMD		1
+#define CHECK_REG_CMD		2
+
+/*
+ * macros for easy use
+ */
+#define rtsx_pci_writel(pcr, reg, value) \
+	iowrite32(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readl(pcr, reg) \
+	ioread32((pcr)->remap_addr + reg)
+#define rtsx_pci_writew(pcr, reg, value) \
+	iowrite16(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readw(pcr, reg) \
+	ioread16((pcr)->remap_addr + reg)
+#define rtsx_pci_writeb(pcr, reg, value) \
+	iowrite8(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readb(pcr, reg) \
+	ioread8((pcr)->remap_addr + reg)
+
+#define rtsx_pci_read_config_byte(pcr, where, val) \
+	pci_read_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_byte(pcr, where, val) \
+	pci_write_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_read_config_dword(pcr, where, val) \
+	pci_read_config_dword((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_dword(pcr, where, val) \
+	pci_write_config_dword((pcr)->pci, where, val)
+
+#define STATE_TRANS_NONE	0
+#define STATE_TRANS_CMD		1
+#define STATE_TRANS_BUF		2
+#define STATE_TRANS_SG		3
+
+#define TRANS_NOT_READY		0
+#define TRANS_RESULT_OK		1
+#define TRANS_RESULT_FAIL	2
+#define TRANS_NO_DEVICE		3
+
+#define RTSX_RESV_BUF_LEN	4096
+#define HOST_CMDS_BUF_LEN	1024
+#define HOST_SG_TBL_BUF_LEN	(RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
+#define HOST_SG_TBL_ITEMS	(HOST_SG_TBL_BUF_LEN / 8)
+#define MAX_SG_ITEM_LEN		0x80000
+
+#define HOST_TO_DEVICE		0
+#define DEVICE_TO_HOST		1
+
+#define MAX_PHASE		31
+#define RX_TUNING_CNT		3
+
+/* SG descriptor */
+#define SG_INT			0x04
+#define SG_END			0x02
+#define SG_VALID		0x01
+
+#define SG_NO_OP		0x00
+#define SG_TRANS_DATA		(0x02 << 4)
+#define SG_LINK_DESC		(0x03 << 4)
+
+/* SD bank voltage */
+#define SD_IO_3V3		0
+#define SD_IO_1V8		1
+
+
+/* Card Clock Enable Register */
+#define SD_CLK_EN			0x04
+#define MS_CLK_EN			0x08
+
+/* Card Select Register */
+#define SD_MOD_SEL			2
+#define MS_MOD_SEL			3
+
+/* Card Output Enable Register */
+#define SD_OUTPUT_EN			0x04
+#define MS_OUTPUT_EN			0x08
+
+/* CARD_SHARE_MODE */
+#define CARD_SHARE_MASK			0x0F
+#define CARD_SHARE_MULTI_LUN		0x00
+#define	CARD_SHARE_NORMAL		0x00
+#define	CARD_SHARE_48_SD		0x04
+#define	CARD_SHARE_48_MS		0x08
+/* CARD_SHARE_MODE for barossa */
+#define CARD_SHARE_BAROSSA_SD		0x01
+#define CARD_SHARE_BAROSSA_MS		0x02
+
+/* SD30_DRIVE_SEL */
+#define DRIVER_TYPE_A			0x05
+#define DRIVER_TYPE_B			0x03
+#define DRIVER_TYPE_C			0x02
+#define DRIVER_TYPE_D			0x01
+
+/* FPDCTL */
+#define SSC_POWER_DOWN			0x01
+#define SD_OC_POWER_DOWN		0x02
+#define ALL_POWER_DOWN			0x07
+#define OC_POWER_DOWN			0x06
+
+/* CLK_CTL */
+#define CHANGE_CLK			0x01
+
+/* SD_STAT1 */
+#define	SD_CRC7_ERR			0x80
+#define	SD_CRC16_ERR			0x40
+#define	SD_CRC_WRITE_ERR		0x20
+#define	SD_CRC_WRITE_ERR_MASK		0x1C
+#define	GET_CRC_TIME_OUT		0x02
+#define	SD_TUNING_COMPARE_ERR		0x01
+
+/* SD_STAT2 */
+#define	SD_RSP_80CLK_TIMEOUT		0x01
+
+/* SD_BUS_STAT */
+#define	SD_CLK_TOGGLE_EN		0x80
+#define	SD_CLK_FORCE_STOP	        0x40
+#define	SD_DAT3_STATUS		        0x10
+#define	SD_DAT2_STATUS		        0x08
+#define	SD_DAT1_STATUS		        0x04
+#define	SD_DAT0_STATUS		        0x02
+#define	SD_CMD_STATUS			0x01
+
+/* SD_PAD_CTL */
+#define	SD_IO_USING_1V8		        0x80
+#define	SD_IO_USING_3V3		        0x7F
+#define	TYPE_A_DRIVING		        0x00
+#define	TYPE_B_DRIVING			0x01
+#define	TYPE_C_DRIVING			0x02
+#define	TYPE_D_DRIVING		        0x03
+
+/* SD_SAMPLE_POINT_CTL */
+#define	DDR_FIX_RX_DAT			0x00
+#define	DDR_VAR_RX_DAT			0x80
+#define	DDR_FIX_RX_DAT_EDGE		0x00
+#define	DDR_FIX_RX_DAT_14_DELAY		0x40
+#define	DDR_FIX_RX_CMD			0x00
+#define	DDR_VAR_RX_CMD			0x20
+#define	DDR_FIX_RX_CMD_POS_EDGE		0x00
+#define	DDR_FIX_RX_CMD_14_DELAY		0x10
+#define	SD20_RX_POS_EDGE		0x00
+#define	SD20_RX_14_DELAY		0x08
+#define SD20_RX_SEL_MASK		0x08
+
+/* SD_PUSH_POINT_CTL */
+#define	DDR_FIX_TX_CMD_DAT		0x00
+#define	DDR_VAR_TX_CMD_DAT		0x80
+#define	DDR_FIX_TX_DAT_14_TSU		0x00
+#define	DDR_FIX_TX_DAT_12_TSU		0x40
+#define	DDR_FIX_TX_CMD_NEG_EDGE		0x00
+#define	DDR_FIX_TX_CMD_14_AHEAD		0x20
+#define	SD20_TX_NEG_EDGE		0x00
+#define	SD20_TX_14_AHEAD		0x10
+#define SD20_TX_SEL_MASK		0x10
+#define	DDR_VAR_SDCLK_POL_SWAP		0x01
+
+/* SD_TRANSFER */
+#define	SD_TRANSFER_START		0x80
+#define	SD_TRANSFER_END			0x40
+#define SD_STAT_IDLE			0x20
+#define	SD_TRANSFER_ERR			0x10
+/* SD Transfer Mode definition */
+#define	SD_TM_NORMAL_WRITE		0x00
+#define	SD_TM_AUTO_WRITE_3		0x01
+#define	SD_TM_AUTO_WRITE_4		0x02
+#define	SD_TM_AUTO_READ_3		0x05
+#define	SD_TM_AUTO_READ_4		0x06
+#define	SD_TM_CMD_RSP			0x08
+#define	SD_TM_AUTO_WRITE_1		0x09
+#define	SD_TM_AUTO_WRITE_2		0x0A
+#define	SD_TM_NORMAL_READ		0x0C
+#define	SD_TM_AUTO_READ_1		0x0D
+#define	SD_TM_AUTO_READ_2		0x0E
+#define	SD_TM_AUTO_TUNING		0x0F
+
+/* SD_VPTX_CTL / SD_VPRX_CTL */
+#define PHASE_CHANGE			0x80
+#define PHASE_NOT_RESET			0x40
+
+/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */
+#define DCMPS_CHANGE			0x80
+#define DCMPS_CHANGE_DONE		0x40
+#define DCMPS_ERROR			0x20
+#define DCMPS_CURRENT_PHASE		0x1F
+
+/* SD Configure 1 Register */
+#define SD_CLK_DIVIDE_0			0x00
+#define	SD_CLK_DIVIDE_256		0xC0
+#define	SD_CLK_DIVIDE_128		0x80
+#define	SD_BUS_WIDTH_1BIT		0x00
+#define	SD_BUS_WIDTH_4BIT		0x01
+#define	SD_BUS_WIDTH_8BIT		0x02
+#define	SD_ASYNC_FIFO_NOT_RST		0x10
+#define	SD_20_MODE			0x00
+#define	SD_DDR_MODE			0x04
+#define	SD_30_MODE			0x08
+
+#define SD_CLK_DIVIDE_MASK		0xC0
+
+/* SD_CMD_STATE */
+#define SD_CMD_IDLE			0x80
+
+/* SD_DATA_STATE */
+#define SD_DATA_IDLE			0x80
+
+/* DCM_DRP_CTL */
+#define DCM_RESET			0x08
+#define DCM_LOCKED			0x04
+#define DCM_208M			0x00
+#define DCM_TX			        0x01
+#define DCM_RX			        0x02
+
+/* DCM_DRP_TRIG */
+#define DRP_START			0x80
+#define DRP_DONE			0x40
+
+/* DCM_DRP_CFG */
+#define DRP_WRITE			0x80
+#define DRP_READ			0x00
+#define DCM_WRITE_ADDRESS_50		0x50
+#define DCM_WRITE_ADDRESS_51		0x51
+#define DCM_READ_ADDRESS_00		0x00
+#define DCM_READ_ADDRESS_51		0x51
+
+/* IRQSTAT0 */
+#define DMA_DONE_INT			0x80
+#define SUSPEND_INT			0x40
+#define LINK_RDY_INT			0x20
+#define LINK_DOWN_INT			0x10
+
+/* DMACTL */
+#define DMA_RST				0x80
+#define DMA_BUSY			0x04
+#define DMA_DIR_TO_CARD			0x00
+#define DMA_DIR_FROM_CARD		0x02
+#define DMA_EN				0x01
+#define DMA_128				(0 << 4)
+#define DMA_256				(1 << 4)
+#define DMA_512				(2 << 4)
+#define DMA_1024			(3 << 4)
+#define DMA_PACK_SIZE_MASK		0x30
+
+/* SSC_CTL1 */
+#define SSC_RSTB			0x80
+#define SSC_8X_EN			0x40
+#define SSC_FIX_FRAC			0x20
+#define SSC_SEL_1M			0x00
+#define SSC_SEL_2M			0x08
+#define SSC_SEL_4M			0x10
+#define SSC_SEL_8M			0x18
+
+/* SSC_CTL2 */
+#define SSC_DEPTH_MASK			0x07
+#define SSC_DEPTH_DISALBE		0x00
+#define SSC_DEPTH_4M			0x01
+#define SSC_DEPTH_2M			0x02
+#define SSC_DEPTH_1M			0x03
+#define SSC_DEPTH_500K			0x04
+#define SSC_DEPTH_250K			0x05
+
+/* System Clock Control Register */
+#define CLK_LOW_FREQ			0x01
+
+/* System Clock Divider Register */
+#define CLK_DIV_1			0x01
+#define CLK_DIV_2			0x02
+#define CLK_DIV_4			0x03
+#define CLK_DIV_8			0x04
+
+/* MS_CFG */
+#define	SAMPLE_TIME_RISING		0x00
+#define	SAMPLE_TIME_FALLING		0x80
+#define	PUSH_TIME_DEFAULT		0x00
+#define	PUSH_TIME_ODD			0x40
+#define	NO_EXTEND_TOGGLE		0x00
+#define	EXTEND_TOGGLE_CHK		0x20
+#define	MS_BUS_WIDTH_1			0x00
+#define	MS_BUS_WIDTH_4			0x10
+#define	MS_BUS_WIDTH_8			0x18
+#define	MS_2K_SECTOR_MODE		0x04
+#define	MS_512_SECTOR_MODE		0x00
+#define	MS_TOGGLE_TIMEOUT_EN		0x00
+#define	MS_TOGGLE_TIMEOUT_DISEN		0x01
+#define MS_NO_CHECK_INT			0x02
+
+/* MS_TRANS_CFG */
+#define	WAIT_INT			0x80
+#define	NO_WAIT_INT			0x00
+#define	NO_AUTO_READ_INT_REG		0x00
+#define	AUTO_READ_INT_REG		0x40
+#define	MS_CRC16_ERR			0x20
+#define	MS_RDY_TIMEOUT			0x10
+#define	MS_INT_CMDNK			0x08
+#define	MS_INT_BREQ			0x04
+#define	MS_INT_ERR			0x02
+#define	MS_INT_CED			0x01
+
+/* MS_TRANSFER */
+#define	MS_TRANSFER_START		0x80
+#define	MS_TRANSFER_END			0x40
+#define	MS_TRANSFER_ERR			0x20
+#define	MS_BS_STATE			0x10
+#define	MS_TM_READ_BYTES		0x00
+#define	MS_TM_NORMAL_READ		0x01
+#define	MS_TM_WRITE_BYTES		0x04
+#define	MS_TM_NORMAL_WRITE		0x05
+#define	MS_TM_AUTO_READ			0x08
+#define	MS_TM_AUTO_WRITE		0x0C
+
+/* SD Configure 2 Register */
+#define	SD_CALCULATE_CRC7		0x00
+#define	SD_NO_CALCULATE_CRC7		0x80
+#define	SD_CHECK_CRC16			0x00
+#define	SD_NO_CHECK_CRC16		0x40
+#define SD_NO_CHECK_WAIT_CRC_TO		0x20
+#define	SD_WAIT_BUSY_END		0x08
+#define	SD_NO_WAIT_BUSY_END		0x00
+#define	SD_CHECK_CRC7			0x00
+#define	SD_NO_CHECK_CRC7		0x04
+#define	SD_RSP_LEN_0			0x00
+#define	SD_RSP_LEN_6			0x01
+#define	SD_RSP_LEN_17			0x02
+/* SD/MMC Response Type Definition */
+#define	SD_RSP_TYPE_R0			0x04
+#define	SD_RSP_TYPE_R1			0x01
+#define	SD_RSP_TYPE_R1b			0x09
+#define	SD_RSP_TYPE_R2			0x02
+#define	SD_RSP_TYPE_R3			0x05
+#define	SD_RSP_TYPE_R4			0x05
+#define	SD_RSP_TYPE_R5			0x01
+#define	SD_RSP_TYPE_R6			0x01
+#define	SD_RSP_TYPE_R7			0x01
+
+/* SD_CONFIURE3 */
+#define	SD_RSP_80CLK_TIMEOUT_EN		0x01
+
+/* Card Transfer Reset Register */
+#define SPI_STOP			0x01
+#define XD_STOP				0x02
+#define SD_STOP				0x04
+#define MS_STOP				0x08
+#define SPI_CLR_ERR			0x10
+#define XD_CLR_ERR			0x20
+#define SD_CLR_ERR			0x40
+#define MS_CLR_ERR			0x80
+
+/* Card Data Source Register */
+#define PINGPONG_BUFFER			0x01
+#define RING_BUFFER			0x00
+
+/* Card Power Control Register */
+#define PMOS_STRG_MASK			0x10
+#define PMOS_STRG_800mA			0x10
+#define PMOS_STRG_400mA			0x00
+#define SD_POWER_OFF			0x03
+#define SD_PARTIAL_POWER_ON		0x01
+#define SD_POWER_ON			0x00
+#define SD_POWER_MASK			0x03
+#define MS_POWER_OFF			0x0C
+#define MS_PARTIAL_POWER_ON		0x04
+#define MS_POWER_ON			0x00
+#define MS_POWER_MASK			0x0C
+
+/* PWR_GATE_CTRL */
+#define PWR_GATE_EN			0x01
+#define LDO3318_PWR_MASK		0x06
+#define LDO_ON				0x00
+#define LDO_SUSPEND			0x04
+#define LDO_OFF				0x06
+
+/* CARD_CLK_SOURCE */
+#define CRC_FIX_CLK			(0x00 << 0)
+#define CRC_VAR_CLK0			(0x01 << 0)
+#define CRC_VAR_CLK1			(0x02 << 0)
+#define SD30_FIX_CLK			(0x00 << 2)
+#define SD30_VAR_CLK0			(0x01 << 2)
+#define SD30_VAR_CLK1			(0x02 << 2)
+#define SAMPLE_FIX_CLK			(0x00 << 4)
+#define SAMPLE_VAR_CLK0			(0x01 << 4)
+#define SAMPLE_VAR_CLK1			(0x02 << 4)
+
+#define MS_CFG				0xFD40
+#define MS_TPC				0xFD41
+#define MS_TRANS_CFG			0xFD42
+#define MS_TRANSFER			0xFD43
+#define MS_INT_REG			0xFD44
+#define MS_BYTE_CNT			0xFD45
+#define MS_SECTOR_CNT_L			0xFD46
+#define MS_SECTOR_CNT_H			0xFD47
+#define MS_DBUS_H			0xFD48
+
+#define SD_CFG1				0xFDA0
+#define SD_CFG2				0xFDA1
+#define SD_CFG3				0xFDA2
+#define SD_STAT1			0xFDA3
+#define SD_STAT2			0xFDA4
+#define SD_BUS_STAT			0xFDA5
+#define SD_PAD_CTL			0xFDA6
+#define SD_SAMPLE_POINT_CTL		0xFDA7
+#define SD_PUSH_POINT_CTL		0xFDA8
+#define SD_CMD0				0xFDA9
+#define SD_CMD1				0xFDAA
+#define SD_CMD2				0xFDAB
+#define SD_CMD3				0xFDAC
+#define SD_CMD4				0xFDAD
+#define SD_CMD5				0xFDAE
+#define SD_BYTE_CNT_L			0xFDAF
+#define SD_BYTE_CNT_H			0xFDB0
+#define SD_BLOCK_CNT_L			0xFDB1
+#define SD_BLOCK_CNT_H			0xFDB2
+#define SD_TRANSFER			0xFDB3
+#define SD_CMD_STATE			0xFDB5
+#define SD_DATA_STATE			0xFDB6
+
+#define SRCTL				0xFC13
+
+#define	DCM_DRP_CTL			0xFC23
+#define	DCM_DRP_TRIG			0xFC24
+#define	DCM_DRP_CFG			0xFC25
+#define	DCM_DRP_WR_DATA_L		0xFC26
+#define	DCM_DRP_WR_DATA_H		0xFC27
+#define	DCM_DRP_RD_DATA_L		0xFC28
+#define	DCM_DRP_RD_DATA_H		0xFC29
+#define SD_VPCLK0_CTL			0xFC2A
+#define SD_VPCLK1_CTL			0xFC2B
+#define SD_DCMPS0_CTL			0xFC2C
+#define SD_DCMPS1_CTL			0xFC2D
+#define SD_VPTX_CTL			SD_VPCLK0_CTL
+#define SD_VPRX_CTL			SD_VPCLK1_CTL
+#define SD_DCMPS_TX_CTL			SD_DCMPS0_CTL
+#define SD_DCMPS_RX_CTL			SD_DCMPS1_CTL
+#define CARD_CLK_SOURCE			0xFC2E
+
+#define CARD_PWR_CTL			0xFD50
+#define CARD_CLK_SWITCH			0xFD51
+#define CARD_SHARE_MODE			0xFD52
+#define CARD_DRIVE_SEL			0xFD53
+#define CARD_STOP			0xFD54
+#define CARD_OE				0xFD55
+#define CARD_AUTO_BLINK			0xFD56
+#define CARD_GPIO_DIR			0xFD57
+#define CARD_GPIO			0xFD58
+
+#define CARD_DATA_SOURCE		0xFD5B
+#define CARD_SELECT			0xFD5C
+#define SD30_DRIVE_SEL			0xFD5E
+
+#define CARD_CLK_EN			0xFD69
+
+#define SDIO_CTRL			0xFD6B
+
+#define FPDCTL				0xFC00
+#define PDINFO				0xFC01
+
+#define CLK_CTL				0xFC02
+#define CLK_DIV				0xFC03
+#define CLK_SEL				0xFC04
+
+#define SSC_DIV_N_0			0xFC0F
+#define SSC_DIV_N_1			0xFC10
+#define SSC_CTL1			0xFC11
+#define SSC_CTL2			0xFC12
+
+#define RCCTL				0xFC14
+
+#define FPGA_PULL_CTL			0xFC1D
+
+#define CARD_PULL_CTL1			0xFD60
+#define CARD_PULL_CTL2			0xFD61
+#define CARD_PULL_CTL3			0xFD62
+#define CARD_PULL_CTL4			0xFD63
+#define CARD_PULL_CTL5			0xFD64
+#define CARD_PULL_CTL6			0xFD65
+
+/* PCI Express Related Registers */
+#define IRQEN0				0xFE20
+#define IRQSTAT0			0xFE21
+#define IRQEN1				0xFE22
+#define IRQSTAT1			0xFE23
+#define TLPRIEN				0xFE24
+#define TLPRISTAT			0xFE25
+#define TLPTIEN				0xFE26
+#define TLPTISTAT			0xFE27
+#define DMATC0				0xFE28
+#define DMATC1				0xFE29
+#define DMATC2				0xFE2A
+#define DMATC3				0xFE2B
+#define DMACTL				0xFE2C
+#define BCTL				0xFE2D
+#define RBBC0				0xFE2E
+#define RBBC1				0xFE2F
+#define RBDAT				0xFE30
+#define RBCTL				0xFE34
+#define CFGADDR0			0xFE35
+#define CFGADDR1			0xFE36
+#define CFGDATA0			0xFE37
+#define CFGDATA1			0xFE38
+#define CFGDATA2			0xFE39
+#define CFGDATA3			0xFE3A
+#define CFGRWCTL			0xFE3B
+#define PHYRWCTL			0xFE3C
+#define PHYDATA0			0xFE3D
+#define PHYDATA1			0xFE3E
+#define PHYADDR				0xFE3F
+#define MSGRXDATA0			0xFE40
+#define MSGRXDATA1			0xFE41
+#define MSGRXDATA2			0xFE42
+#define MSGRXDATA3			0xFE43
+#define MSGTXDATA0			0xFE44
+#define MSGTXDATA1			0xFE45
+#define MSGTXDATA2			0xFE46
+#define MSGTXDATA3			0xFE47
+#define MSGTXCTL			0xFE48
+#define PETXCFG				0xFE49
+
+#define CDRESUMECTL			0xFE52
+#define WAKE_SEL_CTL			0xFE54
+#define PME_FORCE_CTL			0xFE56
+#define ASPM_FORCE_CTL			0xFE57
+#define PM_CLK_FORCE_CTL		0xFE58
+#define PERST_GLITCH_WIDTH		0xFE5C
+#define CHANGE_LINK_STATE		0xFE5B
+#define RESET_LOAD_REG			0xFE5E
+#define EFUSE_CONTENT			0xFE5F
+#define HOST_SLEEP_STATE		0xFE60
+#define MAIN_PWR_OFF_CTL		0xFE70 /* RTS5208 */
+#define SDIO_CFG			0xFE70 /* RTS5209 */
+
+#define NFTS_TX_CTRL			0xFE72
+
+#define PWR_GATE_CTRL			0xFE75
+#define PWD_SUSPEND_EN			0xFE76
+
+/* Memory mapping */
+#define SRAM_BASE			0xE600
+#define RBUF_BASE			0xF400
+#define PPBUF_BASE1			0xF800
+#define PPBUF_BASE2			0xFA00
+#define IMAGE_FLAG_ADDR0		0xCE80
+#define IMAGE_FLAG_ADDR1		0xCE81
+
+#define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
+
+struct pcr_reg_val {
+	/* Enable signal for regulator3318 */
+	u8 ldo_pwr_mask;
+	u8 ldo_pwr_on;
+	u8 ldo_pwr_off;
+	u8 ldo_pwr_suspend;
+
+	/* Power control */
+	u8 sd_pwr_mask;
+	u8 sd_partial_pwr_on;
+	u8 sd_pwr_on;
+	u8 sd_pwr_off;
+	u8 ms_pwr_mask;
+	u8 ms_partial_pwr_on;
+	u8 ms_pwr_on;
+	u8 ms_pwr_off;
+};
+
+struct rtsx_pcr;
+
+struct pcr_ops {
+	int		(*extra_init_hw)(struct rtsx_pcr *pcr);
+	int		(*optimize_phy)(struct rtsx_pcr *pcr);
+	int		(*turn_on_led)(struct rtsx_pcr *pcr);
+	int		(*turn_off_led)(struct rtsx_pcr *pcr);
+	int		(*enable_auto_blink)(struct rtsx_pcr *pcr);
+	int		(*disable_auto_blink)(struct rtsx_pcr *pcr);
+};
+
+enum PDEV_STAT  {PDEV_STAT_IDLE, PDEV_STAT_RUN};
+
+struct rtsx_pcr {
+	struct pci_dev			*pci;
+	unsigned int			id;
+
+	/* pci resources */
+	unsigned long			addr;
+	void __iomem			*remap_addr;
+	int				irq;
+
+	/* host reserved buffer */
+	void				*rtsx_resv_buf;
+	dma_addr_t			rtsx_resv_buf_addr;
+
+	void				*host_cmds_ptr;
+	dma_addr_t			host_cmds_addr;
+	int				ci;
+
+	void				*host_sg_tbl_ptr;
+	dma_addr_t			host_sg_tbl_addr;
+	int				sgi;
+
+	u32				bier;
+	char				trans_result;
+
+	int				need_reset;
+	int				need_release;
+
+	struct delayed_work		carddet_work;
+	struct timer_list		idle_timer;
+	struct work_struct		idle_work;
+
+	spinlock_t			lock;
+	struct mutex			pcr_mutex;
+	struct completion		*done;
+	struct completion		*finish_me;
+
+	unsigned int			cur_clock;
+	bool				ms_pmos;
+	bool				remove_pci;
+	bool				msi_en;
+
+#define EXTRA_CAPS_SD_SDR50		(1 << 0)
+#define EXTRA_CAPS_SD_SDR104		(1 << 1)
+#define EXTRA_CAPS_SD_DDR50		(1 << 2)
+#define EXTRA_CAPS_MMC_HSDDR		(1 << 3)
+#define EXTRA_CAPS_MMC_HS200		(1 << 4)
+#define EXTRA_CAPS_MMC_8BIT		(1 << 5)
+	u32				extra_caps;
+
+#define IC_VER_A			0
+#define IC_VER_B			1
+#define IC_VER_C			2
+#define IC_VER_D			3
+	u8				ic_version;
+
+	const struct pcr_reg_val	*rval;
+	const u32			*sd_pull_ctl_enable_tbl;
+	const u32			*sd_pull_ctl_disable_tbl;
+	const u32			*ms_pull_ctl_enable_tbl;
+	const u32			*ms_pull_ctl_disable_tbl;
+
+	const struct pcr_ops		*ops;
+	enum PDEV_STAT			state;
+
+	int				num_slots;
+	struct rtsx_slot		*slots;
+};
+
+#define CHK_PCI_PID(pcr, pid)		((pcr)->pci->device == (pid))
+#define PCI_VID(pcr)			((pcr)->pci->vendor)
+#define PCI_PID(pcr)			((pcr)->pci->device)
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr);
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data);
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data);
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr);
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+		u8 cmd_type, u16 reg_addr, u8 mask, u8 data);
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr);
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout);
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read, int timeout);
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
+int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card);
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr);
+
+static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
+{
+	return (u8 *)(pcr->host_cmds_ptr);
+}
+
+#endif