sh_cmt: use remove_irq() and remove clockevent workaround
diff mbox

Message ID 20090401141107.32445.63752.sendpatchset@rx1.opensource.se
State Accepted
Headers show

Commit Message

Magnus Damm April 1, 2009, 2:11 p.m. UTC
From: Magnus Damm <damm@igel.co.jp>

Update the sh_cmt driver to make use of recent irq and clockevent changes:
 - use remove_irq() together with setup_irq()
 - remove mult workaround since WARN_ON() now has been moved

Signed-off-by: Magnus Damm <damm@igel.co.jp>
---

 drivers/clocksource/sh_cmt.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Paul Mundt April 2, 2009, 3:44 a.m. UTC | #1
On Wed, Apr 01, 2009 at 11:11:07PM +0900, Magnus Damm wrote:
> Update the sh_cmt driver to make use of recent irq and clockevent changes:
>  - use remove_irq() together with setup_irq()
>  - remove mult workaround since WARN_ON() now has been moved

On Wed, Apr 01, 2009 at 11:20:58PM +0900, Magnus Damm wrote:
> Modify the intc code to install a disable callback. The current
> solution without a disable callback results in use of the
> generic default_disable() function. This function is a no-op
> so suspend_device_irqs() will not disable any intc interrupts
> at suspend time without this patch. Also, install enable and
> shutdown callbacks while at it.

On Wed, Apr 01, 2009 at 11:30:59PM +0900, Magnus Damm wrote:
> Add set_irq_wake() support to intc using sysdev and suspend.
> 
> The intc controllers are put on a list at registration time
> and registered as sysdev devices later on during the boot.
> 
> The sysdev class suspend callback is used to find irqs with
> wakeup enabled belonging to our intc controller. Such irqs
> are simply enabled so wakeup interrupts may reach the cpu.

On Wed, Apr 01, 2009 at 11:39:20PM +0900, Magnus Damm wrote:
> Modify the sh_keysc driver to use enable/disable_irq_wake()
> during suspend and resume. These functions are used to enable
> the sh_keysc interrupt in the interrupt controller so the
> keypad can be used to wakeup the system from suspend.

On Wed, Apr 01, 2009 at 11:45:17PM +0900, Magnus Damm wrote:
> Modify the sh_rtc driver to use set_irq_wake() during suspend
> and resume. These functions are used to enable the rtc interrupts
> in the interrupt controller so the rtc can be used to wakeup the
> system from suspend.

On Wed, Apr 01, 2009 at 11:49:41PM +0900, Magnus Damm wrote:
> Add wakeup support to the migor_ts driver. If user space has enabled
> wakeup, use set_irq_wake() during suspend and resume. With this patch
> the migor_ts driver can be used to wake the system from suspend.

All applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

--- 0001/drivers/clocksource/sh_cmt.c
+++ work/drivers/clocksource/sh_cmt.c	2009-04-01 23:01:39.000000000 +0900
@@ -465,7 +465,6 @@  static void sh_cmt_register_clockevent(s
 	ced->set_mode = sh_cmt_clock_event_mode;
 
 	pr_info("sh_cmt: %s used for clock events\n", ced->name);
-	ced->mult = 1; /* work around misplaced WARN_ON() in clockevents.c */
 	clockevents_register_device(ced);
 }
 
@@ -557,7 +556,7 @@  static int sh_cmt_setup(struct sh_cmt_pr
 			       cfg->clockevent_rating,
 			       cfg->clocksource_rating);
  err2:
-	free_irq(irq, p);
+	remove_irq(irq, &p->irqaction);
  err1:
 	iounmap(p->mapbase);
  err0: