Message ID | 1349773040-8204-1-git-send-email-hvaibhav@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tuesday 09 October 2012 02:27 PM, Vaibhav Hiremath wrote: > This patch adds of_have_populated_dt() check before creating > Signed-off-by: Vaibhav Hiremath<hvaibhav@ti.com> > Cc: Afzal Mohammed<afzal@ti.com> Reviewed-by: Afzal Mohammed <afzal@ti.com> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 09, 2012 at 02:27:20PM +0530, Vaibhav Hiremath wrote: > With recent changes in omap gpmc driver code, in case of DT > boot mode, where bootloader does not configure gpmc cs space > will result into kernel BUG() inside gpmc_mem_init() function, > as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and > gpmc_config7[0].baseaddress is set to '0' on reset. > > This use-case is applicable for any board/EVM which doesn't have > any peripheral connected to gpmc cs0, for example BeagleXM and > BeagleBone, so DT boot mode fails. > > This patch adds of_have_populated_dt() check before creating > device, so that for DT boot mode, gpmc probe will not be called > which is expected behavior, as gpmc is not supported yet from DT. > > Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> > Cc: Afzal Mohammed <afzal@ti.com> > Cc: Tony Lindgren <tony@atomide.com> > Cc Paul Walmsley <paul@pwsan.com> > --- > This should go in for rc1, as this breaks AM33xx boot. Fixes BeagleBone on mainline. Tested-by: Matt Porter <mporter@ti.com> -Matt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 10, 2012 at 19:30:27, Porter, Matt wrote: > On Tue, Oct 09, 2012 at 02:27:20PM +0530, Vaibhav Hiremath wrote: > > With recent changes in omap gpmc driver code, in case of DT > > boot mode, where bootloader does not configure gpmc cs space > > will result into kernel BUG() inside gpmc_mem_init() function, > > as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and > > gpmc_config7[0].baseaddress is set to '0' on reset. > > > > This use-case is applicable for any board/EVM which doesn't have > > any peripheral connected to gpmc cs0, for example BeagleXM and > > BeagleBone, so DT boot mode fails. > > > > This patch adds of_have_populated_dt() check before creating > > device, so that for DT boot mode, gpmc probe will not be called > > which is expected behavior, as gpmc is not supported yet from DT. > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> > > Cc: Afzal Mohammed <afzal@ti.com> > > Cc: Tony Lindgren <tony@atomide.com> > > Cc Paul Walmsley <paul@pwsan.com> > > --- > > This should go in for rc1, as this breaks AM33xx boot. > > Fixes BeagleBone on mainline. > > Tested-by: Matt Porter <mporter@ti.com> > Thanks Matt and Afzal, Tony can this be picked up for rc1?? I know you have already sent pull request for rc1, but by any chance you are planning to send another request? Thanks, Vaibhav > -Matt > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 10, 2012 at 02:19:40PM +0000, Vaibhav Hiremath wrote: > On Wed, Oct 10, 2012 at 19:30:27, Porter, Matt wrote: > > On Tue, Oct 09, 2012 at 02:27:20PM +0530, Vaibhav Hiremath wrote: > > > With recent changes in omap gpmc driver code, in case of DT > > > boot mode, where bootloader does not configure gpmc cs space > > > will result into kernel BUG() inside gpmc_mem_init() function, > > > as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and > > > gpmc_config7[0].baseaddress is set to '0' on reset. > > > > > > This use-case is applicable for any board/EVM which doesn't have > > > any peripheral connected to gpmc cs0, for example BeagleXM and > > > BeagleBone, so DT boot mode fails. > > > > > > This patch adds of_have_populated_dt() check before creating > > > device, so that for DT boot mode, gpmc probe will not be called > > > which is expected behavior, as gpmc is not supported yet from DT. > > > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> > > > Cc: Afzal Mohammed <afzal@ti.com> > > > Cc: Tony Lindgren <tony@atomide.com> > > > Cc Paul Walmsley <paul@pwsan.com> > > > --- > > > This should go in for rc1, as this breaks AM33xx boot. > > > > Fixes BeagleBone on mainline. > > > > Tested-by: Matt Porter <mporter@ti.com> > > > > Thanks Matt and Afzal, > > Tony can this be picked up for rc1?? I know you have already sent pull > request for rc1, but by any chance you are planning to send another request? I also found a separate problem with the mcasp clock data that's needed for rc1. I just posted a patch for that as I need both this patch and the clock data fix to boot from current mainline. -Matt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 10, 2012 at 10:35:01AM -0400, Matt Porter wrote: > On Wed, Oct 10, 2012 at 02:19:40PM +0000, Vaibhav Hiremath wrote: > > On Wed, Oct 10, 2012 at 19:30:27, Porter, Matt wrote: > > > On Tue, Oct 09, 2012 at 02:27:20PM +0530, Vaibhav Hiremath wrote: > > > > With recent changes in omap gpmc driver code, in case of DT > > > > boot mode, where bootloader does not configure gpmc cs space > > > > will result into kernel BUG() inside gpmc_mem_init() function, > > > > as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and > > > > gpmc_config7[0].baseaddress is set to '0' on reset. > > > > > > > > This use-case is applicable for any board/EVM which doesn't have > > > > any peripheral connected to gpmc cs0, for example BeagleXM and > > > > BeagleBone, so DT boot mode fails. > > > > > > > > This patch adds of_have_populated_dt() check before creating > > > > device, so that for DT boot mode, gpmc probe will not be called > > > > which is expected behavior, as gpmc is not supported yet from DT. > > > > > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> > > > > Cc: Afzal Mohammed <afzal@ti.com> > > > > Cc: Tony Lindgren <tony@atomide.com> > > > > Cc Paul Walmsley <paul@pwsan.com> > > > > --- > > > > This should go in for rc1, as this breaks AM33xx boot. > > > > > > Fixes BeagleBone on mainline. > > > > > > Tested-by: Matt Porter <mporter@ti.com> > > > > > > > Thanks Matt and Afzal, > > > > Tony can this be picked up for rc1?? I know you have already sent pull > > request for rc1, but by any chance you are planning to send another request? > > I also found a separate problem with the mcasp clock data that's needed > for rc1. I just posted a patch for that as I need both this patch and the > clock data fix to boot from current mainline. Disregard now that you got me pointed to the pull request with this :) -Matt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Matt Porter <mporter@ti.com> [121010 07:38]: > On Wed, Oct 10, 2012 at 10:35:01AM -0400, Matt Porter wrote: > > On Wed, Oct 10, 2012 at 02:19:40PM +0000, Vaibhav Hiremath wrote: > > > On Wed, Oct 10, 2012 at 19:30:27, Porter, Matt wrote: > > > > On Tue, Oct 09, 2012 at 02:27:20PM +0530, Vaibhav Hiremath wrote: > > > > > With recent changes in omap gpmc driver code, in case of DT > > > > > boot mode, where bootloader does not configure gpmc cs space > > > > > will result into kernel BUG() inside gpmc_mem_init() function, > > > > > as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and > > > > > gpmc_config7[0].baseaddress is set to '0' on reset. > > > > > > > > > > This use-case is applicable for any board/EVM which doesn't have > > > > > any peripheral connected to gpmc cs0, for example BeagleXM and > > > > > BeagleBone, so DT boot mode fails. > > > > > > > > > > This patch adds of_have_populated_dt() check before creating > > > > > device, so that for DT boot mode, gpmc probe will not be called > > > > > which is expected behavior, as gpmc is not supported yet from DT. > > > > > > > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> > > > > > Cc: Afzal Mohammed <afzal@ti.com> > > > > > Cc: Tony Lindgren <tony@atomide.com> > > > > > Cc Paul Walmsley <paul@pwsan.com> > > > > > --- > > > > > This should go in for rc1, as this breaks AM33xx boot. > > > > > > > > Fixes BeagleBone on mainline. > > > > > > > > Tested-by: Matt Porter <mporter@ti.com> > > > > > > > > > > Thanks Matt and Afzal, > > > > > > Tony can this be picked up for rc1?? I know you have already sent pull > > > request for rc1, but by any chance you are planning to send another request? > > > > I also found a separate problem with the mcasp clock data that's needed > > for rc1. I just posted a patch for that as I need both this patch and the > > clock data fix to boot from current mainline. > > Disregard now that you got me pointed to the pull request with this :) Thanks applying $Subject patch into omap-for-v3.7-rc1/fixes-part2 and ignoring the comments about the mcasp clock as it sounds like the mcasp is already fixed. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8ab1e1b..c68f9e1 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -981,6 +981,10 @@ static int __init omap_gpmc_init(void) struct platform_device *pdev; char *oh_name = "gpmc"; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + oh = omap_hwmod_lookup(oh_name); if (!oh) { pr_err("Could not look up %s\n", oh_name);
With recent changes in omap gpmc driver code, in case of DT boot mode, where bootloader does not configure gpmc cs space will result into kernel BUG() inside gpmc_mem_init() function, as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and gpmc_config7[0].baseaddress is set to '0' on reset. This use-case is applicable for any board/EVM which doesn't have any peripheral connected to gpmc cs0, for example BeagleXM and BeagleBone, so DT boot mode fails. This patch adds of_have_populated_dt() check before creating device, so that for DT boot mode, gpmc probe will not be called which is expected behavior, as gpmc is not supported yet from DT. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Afzal Mohammed <afzal@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc Paul Walmsley <paul@pwsan.com> --- This should go in for rc1, as this breaks AM33xx boot. arch/arm/mach-omap2/gpmc.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html