@@ -43,6 +43,11 @@
status = "okay";
};
+ usbphy@125B0000 {
+ compatible = "samsung,exynos4210-usbphy";
+ reg = <0x125B0000 0x100>;
+ };
+
keypad@100A0000 {
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
@@ -242,6 +242,7 @@
#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
#define S3C_PA_USB_HSOTG EXYNOS4_PA_HSOTG
+#define S3C_PA_USB_PHY EXYNOS4_PA_HSPHY
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
@@ -13,6 +13,7 @@
#include <linux/of_platform.h>
#include <linux/serial_core.h>
+#include <linux/platform_data/samsung-usbphy.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -20,9 +21,14 @@
#include <plat/cpu.h>
#include <plat/regs-serial.h>
+#include <plat/usb-phy.h>
#include "common.h"
+static struct samsung_usbphy_data exynos4_usbphy_pdata = {
+ .pmu_isolation = s5p_usb_phy_pmu_isolation,
+};
+
/*
* The following lookup table is used to override device names when devices
* are registered from device tree. This is temporarily added to enable
@@ -77,6 +83,8 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
"exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-usbphy", EXYNOS4_PA_HSPHY,
+ "s3c-usbphy", &exynos4_usbphy_pdata),
{},
};
@@ -221,3 +221,16 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL;
}
+
+void s5p_usb_phy_pmu_isolation(int on)
+{
+ if (on) {
+ writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+ & ~S5P_USBDEVICE_PHY_ENABLE,
+ S5P_USBDEVICE_PHY_CONTROL);
+ } else {
+ writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+ | S5P_USBDEVICE_PHY_ENABLE,
+ S5P_USBDEVICE_PHY_CONTROL);
+ }
+}
Adding usbphy node for Exynos4210 along with the platform data. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> --- arch/arm/boot/dts/exynos4210-smdkv310.dts | 5 +++++ arch/arm/mach-exynos/include/mach/map.h | 1 + arch/arm/mach-exynos/mach-exynos4-dt.c | 8 ++++++++ arch/arm/mach-exynos/setup-usb-phy.c | 13 +++++++++++++ 4 files changed, 27 insertions(+), 0 deletions(-)