diff mbox

[09/27] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller

Message ID 1353905020-29372-10-git-send-email-xiechao.mail@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chao Xie Nov. 26, 2012, 4:43 a.m. UTC
From: Chao Xie <chao.xie@marvell.com>

The PHY is seperated from usb controller.
The usb controller used in marvell pxa168/pxa910/mmp2 are same,
but PHY initialization may be different.
the usb controller can support udc/otg/ehci, and for each of
the mode, it need PHY to initialized before use the controller.
Directly writing the phy driver will make the usb controller
driver to be simple and portable.
The PHY driver will be used by marvell udc/otg/ehci.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
---
 drivers/usb/phy/Kconfig              |    7 +
 drivers/usb/phy/Makefile             |    1 +
 drivers/usb/phy/mv_usb2_phy.c        |  454 ++++++++++++++++++++++++++++++++++
 include/linux/platform_data/mv_usb.h |    9 +-
 include/linux/usb/mv_usb2.h          |   35 +++
 5 files changed, 503 insertions(+), 3 deletions(-)
 create mode 100644 drivers/usb/phy/mv_usb2_phy.c
 create mode 100644 include/linux/usb/mv_usb2.h
diff mbox

Patch

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 63c339b..c28eef1 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -32,3 +32,10 @@  config MV_U3D_PHY
 	help
 	  Enable this to support Marvell USB 3.0 phy controller for Marvell
 	  SoC.
+
+config MV_USB2_PHY
+	bool "Marvell USB 2.0 PHY Driver"
+	depends on USB || USB_GADGET
+	help
+	  Enable this to support Marvell USB 2.0 phy driver for Marvell
+	  SoC.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b069f29..c5bae4a 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -8,3 +8,4 @@  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
 obj-$(CONFIG_MV_U3D_PHY)		+= mv_u3d_phy.o
 obj-$(CONFIG_USB_EHCI_TEGRA)	+= tegra_usb_phy.o
+obj-$(CONFIG_MV_USB2_PHY)		+= mv_usb2_phy.o
diff --git a/drivers/usb/phy/mv_usb2_phy.c b/drivers/usb/phy/mv_usb2_phy.c
new file mode 100644
index 0000000..ed82bf3
--- /dev/null
+++ b/drivers/usb/phy/mv_usb2_phy.c
@@ -0,0 +1,454 @@ 
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/usb/mv_usb2.h>
+
+/* phy regs */
+#define UTMI_REVISION		0x0
+#define UTMI_CTRL		0x4
+#define UTMI_PLL		0x8
+#define UTMI_TX			0xc
+#define UTMI_RX			0x10
+#define UTMI_IVREF		0x14
+#define UTMI_T0			0x18
+#define UTMI_T1			0x1c
+#define UTMI_T2			0x20
+#define UTMI_T3			0x24
+#define UTMI_T4			0x28
+#define UTMI_T5			0x2c
+#define UTMI_RESERVE		0x30
+#define UTMI_USB_INT		0x34
+#define UTMI_DBG_CTL		0x38
+#define UTMI_OTG_ADDON		0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
+#define UTMI_CTRL_PU_REF_SHIFT			20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
+#define UTMI_CTRL_PWR_UP_SHIFT                  0
+
+/* For UTMI_PLL Register */
+#define UTMI_PLL_PLLCALI12_SHIFT		29
+#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
+
+#define UTMI_PLL_PLLVDD18_SHIFT			27
+#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
+
+#define UTMI_PLL_PLLVDD12_SHIFT			25
+#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
+
+#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
+#define CLK_BLK_EN                              (0x1 << 24)
+#define PLL_READY                               (0x1 << 23)
+#define KVCO_EXT                                (0x1 << 22)
+#define VCOCAL_START                            (0x1 << 21)
+
+#define UTMI_PLL_KVCO_SHIFT			15
+#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
+
+#define UTMI_PLL_ICP_SHIFT			12
+#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
+
+#define UTMI_PLL_FBDIV_SHIFT                    4
+#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
+
+#define UTMI_PLL_REFDIV_SHIFT                   0
+#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
+
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
+
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
+
+#define UTMI_TX_TXVDD12_SHIFT                   22
+#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
+
+#define UTMI_TX_CK60_PHSEL_SHIFT                17
+#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
+
+#define UTMI_TX_IMPCAL_VTH_SHIFT                14
+#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
+
+#define REG_RCAL_START                          (0x1 << 12)
+
+#define UTMI_TX_LOW_VDD_EN_SHIFT                11
+
+#define UTMI_TX_AMP_SHIFT			0
+#define UTMI_TX_AMP_MASK			(0x7 << 0)
+
+/* For UTMI_RX Register */
+#define UTMI_REG_SQ_LENGTH_SHIFT                15
+#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
+
+#define UTMI_RX_SQ_THRESH_SHIFT                 4
+#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
+
+#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
+
+enum mv_usb2_phy_type {
+	PXA168_USB,
+	PXA910_USB,
+	MMP2_USB,
+};
+
+static struct mv_usb2_phy *the_phy;
+
+struct mv_usb2_phy *mv_usb2_get_phy(void)
+{
+	return the_phy;
+}
+EXPORT_SYMBOL(mv_usb2_get_phy);
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg |= value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_write(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	writel_relaxed(value, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static int _usb_phy_init(struct mv_usb2_phy *mv_phy)
+{
+	struct platform_device *pdev = mv_phy->pdev;
+	unsigned int loops = 0;
+	void __iomem *base = mv_phy->base;
+
+	dev_dbg(&pdev->dev, "phy init\n");
+
+	/* Initialize the USB PHY power */
+	if (mv_phy->type == PXA910_USB) {
+		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+			| (1<<UTMI_CTRL_PU_REF_SHIFT));
+	}
+
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+
+	/* UTMI_PLL settings */
+	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
+		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
+		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
+		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
+
+	/* UTMI_TX */
+	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
+		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
+		| UTMI_TX_AMP_MASK);
+	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
+		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
+		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
+
+	/* UTMI_RX */
+	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+		| UTMI_REG_SQ_LENGTH_MASK);
+	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
+		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
+
+	/* UTMI_IVREF */
+	if (mv_phy->type == PXA168_USB)
+		/* fixing Microsoft Altair board interface with NEC hub issue -
+		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
+		u2o_write(base, UTMI_IVREF, 0x4bf);
+
+	/* toggle VCOCAL_START bit of UTMI_PLL */
+	udelay(200);
+	u2o_set(base, UTMI_PLL, VCOCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+	/* toggle REG_RCAL_START bit of UTMI_TX */
+	udelay(400);
+	u2o_set(base, UTMI_TX, REG_RCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_TX, REG_RCAL_START);
+	udelay(400);
+
+	/* Make sure PHY PLL is ready */
+	loops = 0;
+	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
+		mdelay(1);
+		loops++;
+		if (loops > 100) {
+			dev_warn(&pdev->dev, "calibrate timeout, UTMI_PLL %x\n",
+				u2o_get(base, UTMI_PLL));
+			break;
+		}
+	}
+
+	if (mv_phy->type == PXA168_USB) {
+		u2o_set(base, UTMI_RESERVE, 1 << 5);
+		/* Turn on UTMI PHY OTG extension */
+		u2o_write(base, UTMI_OTG_ADDON, 1);
+	}
+
+	return 0;
+}
+
+static int _usb_phy_shutdown(struct mv_usb2_phy *mv_phy)
+{
+	void __iomem *base = mv_phy->base;
+
+	if (mv_phy->type == PXA168_USB)
+		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
+
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+
+	return 0;
+}
+
+static int usb_phy_init(struct mv_usb2_phy *mv_phy)
+{
+	int i = 0;
+
+	mutex_lock(&mv_phy->phy_lock);
+	if (mv_phy->refcount++ == 0) {
+		for (i = 0; i < mv_phy->clks_num; i++)
+			clk_prepare_enable(mv_phy->clks[i]);
+		_usb_phy_init(mv_phy);
+	}
+	mutex_unlock(&mv_phy->phy_lock);
+	return 0;
+}
+
+static void usb_phy_shutdown(struct mv_usb2_phy *mv_phy)
+{
+	int i = 0;
+
+	mutex_lock(&mv_phy->phy_lock);
+	if (mv_phy->refcount++ == 0) {
+		_usb_phy_shutdown(mv_phy);
+		for (i = 0; i < mv_phy->clks_num; i++)
+			clk_disable_unprepare(mv_phy->clks[i]);
+	}
+	mutex_unlock(&mv_phy->phy_lock);
+}
+
+static struct of_device_id usb_phy_dt_ids[] = {
+	{ .compatible = "mrvl,pxa168-usb-phy",	.data = (void *)PXA168_USB},
+	{ .compatible = "mrvl,pxa910-usb-phy",	.data = (void *)PXA910_USB},
+	{ .compatible = "mrvl,mmp2-usb-phy",	.data = (void *)MMP2_USB},
+	{}
+};
+MODULE_DEVICE_TABLE(of, usb_phy_dt_ids);
+
+static int __devinit usb_phy_parse_dt(struct platform_device *pdev,
+				struct mv_usb2_phy *mv_phy)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(usb_phy_dt_ids, &pdev->dev);
+	unsigned int clks_num;
+	int i, ret;
+	const char *clk_name;
+
+	if (!np)
+		return 1;
+
+	clks_num = of_property_count_strings(np, "clocks");
+	if (clks_num < 0) {
+		dev_err(&pdev->dev, "failed to get clock number\n");
+		return clks_num;
+	}
+
+	mv_phy->clks = devm_kzalloc(&pdev->dev,
+		sizeof(struct clk *) * clks_num, GFP_KERNEL);
+	if (mv_phy->clks == NULL) {
+		dev_err(&pdev->dev,
+			"failed to allocate mempory for clocks");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < clks_num; i++) {
+		ret = of_property_read_string_index(np, "clocks", i,
+			&clk_name);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to read clocks\n");
+			return ret;
+		}
+		mv_phy->clks[i] = devm_clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(mv_phy->clks[i])) {
+			dev_err(&pdev->dev, "failed to get clock %s\n",
+				clk_name);
+			return PTR_ERR(mv_phy->clks[i]);
+		}
+	}
+
+	mv_phy->clks_num = clks_num;
+	mv_phy->type = (unsigned int)(of_id->data);
+
+	return 0;
+}
+
+static int __devinit usb_phy_probe(struct platform_device *pdev)
+{
+	struct mv_usb2_phy *mv_phy;
+	struct resource *r;
+	int ret, i;
+
+	mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
+	if (mv_phy == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+	mutex_init(&mv_phy->phy_lock);
+
+	ret = usb_phy_parse_dt(pdev, mv_phy);
+	/* no CONFIG_OF */
+	if (ret > 0) {
+		struct mv_usb_phy_platform_data *pdata
+				= pdev->dev.platform_data;
+		const struct platform_device_id *id
+				= platform_get_device_id(pdev);
+
+		if (pdata == NULL || id == NULL) {
+			dev_err(&pdev->dev,
+				"missing platform_data or id_entry\n");
+			return -ENODEV;
+		}
+		mv_phy->type = (unsigned int)(id->driver_data);
+		mv_phy->clks_num = pdata->clknum;
+		mv_phy->clks = devm_kzalloc(&pdev->dev,
+			sizeof(struct clk *) * mv_phy->clks_num, GFP_KERNEL);
+		if (mv_phy->clks == NULL) {
+			dev_err(&pdev->dev,
+				"failed to allocate mempory for clocks");
+			return -ENOMEM;
+		}
+		for (i = 0; i < mv_phy->clks_num; i++)
+			mv_phy->clks[i] = devm_clk_get(&pdev->dev,
+							pdata->clkname[i]);
+			if (IS_ERR(mv_phy->clks[i])) {
+				dev_err(&pdev->dev, "failed to get clock %s\n",
+					pdata->clkname[i]);
+				return PTR_ERR(mv_phy->clks[i]);
+			}
+	} else if (ret < 0) {
+		dev_err(&pdev->dev, "error parse dt\n");
+		return ret;
+	}
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+		return -ENODEV;
+	}
+	mv_phy->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (mv_phy->base == NULL) {
+		dev_err(&pdev->dev, "error map register base\n");
+		return -EBUSY;
+	}
+	platform_set_drvdata(pdev, mv_phy);
+	mv_phy->pdev = pdev;
+	mv_phy->init = usb_phy_init;
+	mv_phy->shutdown = usb_phy_shutdown;
+
+	platform_set_drvdata(pdev, mv_phy);
+
+	the_phy = mv_phy;
+
+	dev_info(&pdev->dev, "mv usb2 phy initialized\n");
+
+	return 0;
+}
+
+static int __devexit usb_phy_remove(struct platform_device *pdev)
+{
+	the_phy = NULL;
+
+	return 0;
+}
+
+static struct platform_device_id usb_phy_ids[] = {
+	{ .name = "pxa168-usb-phy",	.driver_data = PXA168_USB },
+	{ .name = "pxa910-usb-phy",	.driver_data = PXA910_USB },
+	{ .name = "mmp2-usb-phy",	.driver_data = MMP2_USB },
+	{}
+};
+
+static struct platform_driver usb_phy_driver = {
+	.probe	= usb_phy_probe,
+	.remove = usb_phy_remove,
+	.driver = {
+		.name   = "pxa168-usb-phy",
+		.of_match_table = usb_phy_dt_ids,
+	},
+	.id_table = usb_phy_ids,
+};
+
+static int __init mv_usb2_phy_init(void)
+{
+	return platform_driver_register(&usb_phy_driver);
+}
+arch_initcall(mv_usb2_phy_init);
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index 944b01d..fd3d1b4 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -47,9 +47,12 @@  struct mv_usb_platform_data {
 	/* Force a_bus_req to be asserted */
 	 unsigned int    otg_force_a_bus_req:1;
 
-	int	(*phy_init)(void __iomem *regbase);
-	void	(*phy_deinit)(void __iomem *regbase);
 	int	(*set_vbus)(unsigned int vbus);
-	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
+
+struct mv_usb_phy_platform_data {
+	unsigned int	clknum;
+	char		**clkname;
+};
+
 #endif
diff --git a/include/linux/usb/mv_usb2.h b/include/linux/usb/mv_usb2.h
new file mode 100644
index 0000000..5d3d7bd
--- /dev/null
+++ b/include/linux/usb/mv_usb2.h
@@ -0,0 +1,35 @@ 
+/*
+ * Copyright (C) 2012 Marvell Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MV_USB2_H
+#define __MV_USB2_H
+
+#include <linux/clk.h>
+
+struct mv_usb2_phy {
+	struct platform_device	*pdev;
+	struct mutex		phy_lock;
+	unsigned int		refcount;
+	unsigned int		type;
+	void __iomem		*base;
+	struct clk		**clks;
+	unsigned int		clks_num;
+
+	int	(*init)(struct mv_usb2_phy *mv_phy);
+	void	(*shutdown)(struct mv_usb2_phy *mv_phy);
+};
+
+struct mv_usb2_phy *mv_usb2_get_phy(void);
+
+#endif