@@ -1319,9 +1319,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
goto cleanup_gem;
/* Only enable hotplug handling once the fbdev is fully set up. */
- dev_priv->enable_hotplug_processing = true;
-
- drm_kms_helper_poll_init(dev);
+ intel_hpd_init(dev);
/* We're off and running w/KMS */
dev_priv->mm.suspended = 0;
@@ -295,6 +295,7 @@ struct drm_i915_display_funcs {
struct drm_i915_gem_object *obj);
int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
int x, int y);
+ void (*hpd_irq_setup)(struct drm_device *dev);
/* clock updates for mode set */
/* cursor updates */
/* render clock increase/decrease */
@@ -1341,6 +1342,7 @@ void i915_hangcheck_elapsed(unsigned long data);
void i915_handle_error(struct drm_device *dev, bool wedged);
extern void intel_irq_init(struct drm_device *dev);
+extern void intel_hpd_init(struct drm_device *dev);
extern void intel_gt_init(struct drm_device *dev);
extern void intel_gt_reset(struct drm_device *dev);
@@ -1995,7 +1995,6 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
u32 render_irqs;
u16 msid;
@@ -2024,6 +2023,9 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
msid |= (1<<14);
pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ POSTING_READ(PORT_HOTPLUG_EN);
+
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IER, enable_mask);
I915_WRITE(VLV_IIR, 0xffffffff);
@@ -2053,6 +2055,15 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
#endif
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
+
+ return 0;
+}
+
+static void valleyview_hpd_irq_setup(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
/* Note HDMI and DP share bits */
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
@@ -2070,8 +2081,6 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
}
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
- return 0;
}
static void valleyview_irq_uninstall(struct drm_device *dev)
@@ -2301,6 +2310,9 @@ static int i915_irq_postinstall(struct drm_device *dev)
I915_USER_INTERRUPT;
if (I915_HAS_HOTPLUG(dev)) {
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ POSTING_READ(PORT_HOTPLUG_EN);
+
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
@@ -2311,8 +2323,18 @@ static int i915_irq_postinstall(struct drm_device *dev)
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
+ intel_opregion_enable_asle(dev);
+
+ return 0;
+}
+
+static void i915_hpd_irq_setup(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug_en;
+
if (I915_HAS_HOTPLUG(dev)) {
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ hotplug_en = I915_READ(PORT_HOTPLUG_EN);
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
@@ -2333,10 +2355,6 @@ static int i915_irq_postinstall(struct drm_device *dev)
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
-
- intel_opregion_enable_asle(dev);
-
- return 0;
}
static irqreturn_t i915_irq_handler(int irq, void *arg)
@@ -2496,7 +2514,6 @@ static void i965_irq_preinstall(struct drm_device * dev)
static int i965_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 hotplug_en;
u32 enable_mask;
u32 error_mask;
@@ -2538,6 +2555,19 @@ static int i965_irq_postinstall(struct drm_device *dev)
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ POSTING_READ(PORT_HOTPLUG_EN);
+
+ intel_opregion_enable_asle(dev);
+
+ return 0;
+}
+
+static void i965_hpd_irq_setup(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug_en;
+
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
@@ -2572,10 +2602,6 @@ static int i965_irq_postinstall(struct drm_device *dev)
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
- intel_opregion_enable_asle(dev);
-
- return 0;
}
static irqreturn_t i965_irq_handler(int irq, void *arg)
@@ -2754,6 +2780,7 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->irq_uninstall = valleyview_irq_uninstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
+ dev_priv->display.hpd_irq_setup = valleyview_hpd_irq_setup;
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
/* Share pre & uninstall handlers with ILK/SNB */
dev->driver->irq_handler = ivybridge_irq_handler;
@@ -2780,13 +2807,39 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
dev->driver->irq_handler = i915_irq_handler;
+ dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else {
dev->driver->irq_preinstall = i965_irq_preinstall;
dev->driver->irq_postinstall = i965_irq_postinstall;
dev->driver->irq_uninstall = i965_irq_uninstall;
dev->driver->irq_handler = i965_irq_handler;
+ dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
}
dev->driver->enable_vblank = i915_enable_vblank;
dev->driver->disable_vblank = i915_disable_vblank;
}
}
+
+void intel_hpd_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->display.hpd_irq_setup)
+ dev_priv->display.hpd_irq_setup(dev);
+
+ /*
+ * Some ports require correctly set-up hpd registers for detection to
+ * work properly, e.g. VGA on gm45. Hence we can only set up the initial
+ * fbdev config after hpd irqs are fully enabled. Now we should scan for
+ * the initial config only once hotplug handling is enabled, but due to
+ * screwed-up locking around kms/fbdev init we can't protect the fdbev
+ * initial config scanning against hotplug events. Hence do this first
+ * and ignore the tiny window where we will loose hotplug notifactions.
+ */
+ drm_fb_helper_initial_config(&dev_priv->fbdev->helper, 32);
+
+ /* Only enable hotplug handling once the fbdev is fully set up. */
+ dev_priv->enable_hotplug_processing = true;
+
+ drm_kms_helper_poll_init(dev);
+}
@@ -243,7 +243,7 @@ int intel_fbdev_init(struct drm_device *dev)
}
drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
- drm_fb_helper_initial_config(&ifbdev->helper, 32);
+
return 0;
}
For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> --- drivers/gpu/drm/i915/i915_dma.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/i915_irq.c | 79 ++++++++++++++++++++++++++++++++------- drivers/gpu/drm/i915/intel_fb.c | 2 +- 4 files changed, 70 insertions(+), 17 deletions(-)