Thermal: Fix to use read critical temperature when required
diff mbox

Message ID 1357690739-17009-1-git-send-email-amit.daniel@samsung.com
State Rejected
Delegated to: Zhang Rui
Headers show

Commit Message

Amit Kachhap Jan. 9, 2013, 12:18 a.m. UTC
This patch modifies the code to use get_crit_temp instead of
the normal get_trip_temp when critical threshold point is crossed
or queried about.

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/thermal_sys.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

Comments

Zhang Rui Feb. 1, 2013, 5:44 a.m. UTC | #1
On Tue, 2013-01-08 at 16:18 -0800, Amit Daniel Kachhap wrote:
> This patch modifies the code to use get_crit_temp instead of
> the normal get_trip_temp when critical threshold point is crossed
> or queried about.
> 

is there any problem in the current code?

> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
>  drivers/thermal/thermal_sys.c |   15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
> index ecdfc7d..0dc6403 100644
> --- a/drivers/thermal/thermal_sys.c
> +++ b/drivers/thermal/thermal_sys.c
> @@ -345,7 +345,10 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
>  {
>  	long trip_temp;
>  
> -	tz->ops->get_trip_temp(tz, trip, &trip_temp);
> +	if (tz->ops->get_crit_temp)
> +		tz->ops->get_crit_temp(tz, &trip_temp);
> +	else
> +		tz->ops->get_trip_temp(tz, trip, &trip_temp);
>  
handle_critical_trips() can handle both active and hot trip points.
this change will break HOT trip point.

>  	/* If we have not crossed the trip_temp, we do not care. */
>  	if (tz->temperature < trip_temp)
> @@ -550,6 +553,7 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr,
>  	struct thermal_zone_device *tz = to_thermal_zone(dev);
>  	int trip, ret;
>  	long temperature;
> +	enum thermal_trip_type type;
>  
>  	if (!tz->ops->get_trip_temp)
>  		return -EPERM;
> @@ -557,7 +561,14 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr,
>  	if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
>  		return -EINVAL;
>  
> -	ret = tz->ops->get_trip_temp(tz, trip, &temperature);
> +	ret = tz->ops->get_trip_type(tz, trip, &type);
> +	if (ret)
> +		return ret;
> +
> +	if (type == THERMAL_TRIP_CRITICAL && tz->ops->get_crit_temp)
> +		ret = tz->ops->get_crit_temp(tz, &temperature);
> +	else
> +		ret = tz->ops->get_trip_temp(tz, trip, &temperature);
>  

what's the benefit of using .get_crit_temp() instead of .get_trip_temp()
for CRITICAL trip points here?
.get_trip_point can also get the critical trip point temperature.

instead, I think we could remove .get_crit_temp callback.
for hwmon sysfs, we just need to use get_trip_type to find the critical
trip point.

thanks,
rui

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
durgadoss.r@intel.com Feb. 1, 2013, 8:43 a.m. UTC | #2
> -----Original Message-----

> From: Zhang, Rui

> Sent: Friday, February 01, 2013 11:14 AM

> To: Amit Daniel Kachhap

> Cc: linux-pm@vger.kernel.org; linux-kernel@vger.kernel.org; R, Durgadoss

> Subject: Re: [PATCH] Thermal: Fix to use read critical temperature when

> required

> 

> On Tue, 2013-01-08 at 16:18 -0800, Amit Daniel Kachhap wrote:

> > This patch modifies the code to use get_crit_temp instead of

> > the normal get_trip_temp when critical threshold point is crossed

> > or queried about.

> >

> 

> is there any problem in the current code?

> 

> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>

> > ---

> >  drivers/thermal/thermal_sys.c |   15 +++++++++++++--

> >  1 file changed, 13 insertions(+), 2 deletions(-)

> >

> > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c

> > index ecdfc7d..0dc6403 100644

> > --- a/drivers/thermal/thermal_sys.c

> > +++ b/drivers/thermal/thermal_sys.c

> > @@ -345,7 +345,10 @@ static void handle_critical_trips(struct

> thermal_zone_device *tz,

> >  {

> >  	long trip_temp;

> >

> > -	tz->ops->get_trip_temp(tz, trip, &trip_temp);

> > +	if (tz->ops->get_crit_temp)

> > +		tz->ops->get_crit_temp(tz, &trip_temp);

> > +	else

> > +		tz->ops->get_trip_temp(tz, trip, &trip_temp);

> >

> handle_critical_trips() can handle both active and hot trip points.

> this change will break HOT trip point.

> 

> >  	/* If we have not crossed the trip_temp, we do not care. */

> >  	if (tz->temperature < trip_temp)

> > @@ -550,6 +553,7 @@ trip_point_temp_show(struct device *dev, struct

> device_attribute *attr,

> >  	struct thermal_zone_device *tz = to_thermal_zone(dev);

> >  	int trip, ret;

> >  	long temperature;

> > +	enum thermal_trip_type type;

> >

> >  	if (!tz->ops->get_trip_temp)

> >  		return -EPERM;

> > @@ -557,7 +561,14 @@ trip_point_temp_show(struct device *dev, struct

> device_attribute *attr,

> >  	if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))

> >  		return -EINVAL;

> >

> > -	ret = tz->ops->get_trip_temp(tz, trip, &temperature);

> > +	ret = tz->ops->get_trip_type(tz, trip, &type);

> > +	if (ret)

> > +		return ret;

> > +

> > +	if (type == THERMAL_TRIP_CRITICAL && tz->ops->get_crit_temp)

> > +		ret = tz->ops->get_crit_temp(tz, &temperature);

> > +	else

> > +		ret = tz->ops->get_trip_temp(tz, trip, &temperature);

> >

> 

> what's the benefit of using .get_crit_temp() instead of .get_trip_temp()

> for CRITICAL trip points here?

> .get_trip_point can also get the critical trip point temperature.

> 

> instead, I think we could remove .get_crit_temp callback.


I agree with you Rui here :-)

> for hwmon sysfs, we just need to use get_trip_type to find the critical

> trip point.


Yes, this should work.

Thanks,
Durga

Patch
diff mbox

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index ecdfc7d..0dc6403 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -345,7 +345,10 @@  static void handle_critical_trips(struct thermal_zone_device *tz,
 {
 	long trip_temp;
 
-	tz->ops->get_trip_temp(tz, trip, &trip_temp);
+	if (tz->ops->get_crit_temp)
+		tz->ops->get_crit_temp(tz, &trip_temp);
+	else
+		tz->ops->get_trip_temp(tz, trip, &trip_temp);
 
 	/* If we have not crossed the trip_temp, we do not care. */
 	if (tz->temperature < trip_temp)
@@ -550,6 +553,7 @@  trip_point_temp_show(struct device *dev, struct device_attribute *attr,
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	int trip, ret;
 	long temperature;
+	enum thermal_trip_type type;
 
 	if (!tz->ops->get_trip_temp)
 		return -EPERM;
@@ -557,7 +561,14 @@  trip_point_temp_show(struct device *dev, struct device_attribute *attr,
 	if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
 		return -EINVAL;
 
-	ret = tz->ops->get_trip_temp(tz, trip, &temperature);
+	ret = tz->ops->get_trip_type(tz, trip, &type);
+	if (ret)
+		return ret;
+
+	if (type == THERMAL_TRIP_CRITICAL && tz->ops->get_crit_temp)
+		ret = tz->ops->get_crit_temp(tz, &temperature);
+	else
+		ret = tz->ops->get_trip_temp(tz, trip, &temperature);
 
 	if (ret)
 		return ret;