| Message ID | 1359464832-8875-1-git-send-email-prabhakar.lad@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Prabhakar, On 01/29/2013 02:07 PM, Prabhakar Lad wrote: [...] > diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > new file mode 100644 > index 0000000..55d3ffd > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > @@ -0,0 +1,38 @@ > +* Texas Instruments TVP514x video decoder > + > +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip > +digital video decoder that digitizes and decodes all popular baseband analog > +video formats into digital video component. The tvp514x decoder supports analog- > +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D > +conversion and decoding of NTSC, PAL and SECAM composite and S-video into > +component YCbCr. > + > +Required Properties : > +- compatible: Must be "ti,tvp514x-decoder" There are no significant differences among TVP514* devices as listed above, you would like to handle above ? I'm just wondering if you don't need ,for instance, two separate compatible properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" ? > +- hsync-active: HSYNC Polarity configuration for current interface. > +- vsync-active: VSYNC Polarity configuration for current interface. > +- data-active: Clock polarity of the current interface. I guess you mean "pclk-sample: Clock polarity..." ? > + > +Example: > + > +i2c0@1c22000 { > + ... > + ... > + > + tvp514x@5c { > + compatible = "ti,tvp514x-decoder"; > + reg =<0x5c>; > + > + port { > + tvp514x_1: endpoint { > + /* Active high (Defaults to 0) */ > + hsync-active =<1>; > + /* Active high (Defaults to 0) */ > + hsync-active =<1>; Should it be vsync-active ? > + /* Active low (Defaults to 0) */ > + data-active =<0>; and this pclk-sample ? > + }; > + }; > + }; > + ... > +}; > diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c > index a4f0a70..24ce759 100644 > --- a/drivers/media/i2c/tvp514x.c > +++ b/drivers/media/i2c/tvp514x.c > @@ -12,6 +12,7 @@ > * Hardik Shah<hardik.shah@ti.com> > * Manjunath Hadli<mrh@ti.com> > * Karicheri Muralidharan<m-karicheri2@ti.com> > + * Prabhakar Lad<prabhakar.lad@ti.com> > * > * This package is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -33,7 +34,9 @@ > #include<linux/delay.h> > #include<linux/videodev2.h> > #include<linux/module.h> > +#include<linux/of_device.h> > > +#include<media/v4l2-of.h> > #include<media/v4l2-async.h> > #include<media/v4l2-device.h> > #include<media/v4l2-common.h> > @@ -930,6 +933,58 @@ static struct tvp514x_decoder tvp514x_dev = { > > }; > > +#if defined(CONFIG_OF) > +static const struct of_device_id tvp514x_of_match[] = { > + {.compatible = "ti,tvp514x-decoder", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, tvp514x_of_match); > + > +static struct tvp514x_platform_data > + *tvp514x_get_pdata(struct i2c_client *client) > +{ > + if (!client->dev.platform_data&& client->dev.of_node) { > + struct tvp514x_platform_data *pdata; > + struct v4l2_of_endpoint bus_cfg; > + struct device_node *endpoint; > + > + pdata = devm_kzalloc(&client->dev, > + sizeof(struct tvp514x_platform_data), > + GFP_KERNEL); > + client->dev.platform_data = pdata; Do you really need to set client->dev.platform_data this way ? What about passing struct tvp514x_decoder pointer to this function and initializing struct tvp514x_decoder::pdata instead ? > + if (!pdata) > + return NULL; > + > + endpoint = of_get_child_by_name(client->dev.of_node, "port"); > + if (endpoint) > + endpoint = of_get_child_by_name(endpoint, "endpoint"); I think you could replace these two calls above with endpoint = v4l2_of_get_next_endpoint(client->dev.of_node); Now I see I should have modified this function to ensure it works also when 'port' nodes are grouped in a 'ports' node. > + if (!endpoint) { > + v4l2_info(client, "Using default data!!\n"); > + } else { > + v4l2_of_parse_parallel_bus(endpoint,&bus_cfg); > + > + if (bus_cfg.mbus_flags& V4L2_MBUS_HSYNC_ACTIVE_HIGH) > + pdata->hs_polarity = 1; > + if (bus_cfg.mbus_flags& V4L2_MBUS_VSYNC_ACTIVE_HIGH) > + pdata->vs_polarity = 1; > + if (bus_cfg.mbus_flags& V4L2_MBUS_PCLK_SAMPLE_RISING) > + pdata->clk_polarity = 1; > + } > + } > + > + return client->dev.platform_data; > +} > +#else > +#define tvp514x_of_match NULL > + > +static struct tvp514x_platform_data > + *tvp514x_get_pdata(struct i2c_client *client) > +{ > + return client->dev.platform_data; > +} > +#endif > + > /** > * tvp514x_probe() - decoder driver i2c probe handler > * @client: i2c driver client device structure > @@ -941,6 +996,7 @@ static struct tvp514x_decoder tvp514x_dev = { > static int > tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) > { > + struct tvp514x_platform_data *pdata; > struct tvp514x_decoder *decoder; > struct v4l2_subdev *sd; > int ret; > @@ -949,22 +1005,25 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) > if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) > return -EIO; > > + pdata = tvp514x_get_pdata(client); > + if (!pdata) { > + v4l2_err(client, "No platform data!!\n"); > + return -EPROBE_DEFER; > + } > + > decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); > if (!decoder) > return -ENOMEM; > > /* Initialize the tvp514x_decoder with default configuration */ > *decoder = tvp514x_dev; > - if (!client->dev.platform_data) { > - v4l2_err(client, "No platform data!!\n"); > - return -EPROBE_DEFER; > - } > + > /* Copy default register configuration */ > memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, > sizeof(tvp514x_reg_list_default)); > > /* Copy board specific information here */ > - decoder->pdata = client->dev.platform_data; > + decoder->pdata = pdata; > > /** > * Fetch platform specific data, and configure the > @@ -1096,6 +1155,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id); > > static struct i2c_driver tvp514x_driver = { > .driver = { > + .of_match_table = tvp514x_of_match, > .owner = THIS_MODULE, > .name = TVP514X_MODULE_NAME, > }, -- Regards, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sylwester, Thanks for the review. On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote: > Hi Prabhakar, > > On 01/29/2013 02:07 PM, Prabhakar Lad wrote: > [...] > >> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >> new file mode 100644 >> index 0000000..55d3ffd >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >> @@ -0,0 +1,38 @@ >> +* Texas Instruments TVP514x video decoder >> + >> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, >> single-chip >> +digital video decoder that digitizes and decodes all popular baseband >> analog >> +video formats into digital video component. The tvp514x decoder supports >> analog- >> +to-digital (A/D) conversion of component RGB and YPbPr signals as well as >> A/D >> +conversion and decoding of NTSC, PAL and SECAM composite and S-video into >> +component YCbCr. >> + >> +Required Properties : >> +- compatible: Must be "ti,tvp514x-decoder" > > > There are no significant differences among TVP514* devices as listed above, > you would like to handle above ? > > I'm just wondering if you don't need ,for instance, two separate compatible > properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" ? > There are few differences in init/power sequence tough, I would still like to have single compatible property "ti,tvp514x-decoder", If you feel we need separate property I will change it please let me know on this. > >> +- hsync-active: HSYNC Polarity configuration for current interface. >> +- vsync-active: VSYNC Polarity configuration for current interface. >> +- data-active: Clock polarity of the current interface. > > > I guess you mean "pclk-sample: Clock polarity..." ? > > yeah this needs to be 'pclk-sample' property, thanks for pointing it. >> + >> +Example: >> + >> +i2c0@1c22000 { >> + ... >> + ... >> + >> + tvp514x@5c { >> + compatible = "ti,tvp514x-decoder"; >> + reg =<0x5c>; >> + >> + port { >> + tvp514x_1: endpoint { >> + /* Active high (Defaults to 0) */ >> + hsync-active =<1>; >> + /* Active high (Defaults to 0) */ >> + hsync-active =<1>; > > > Should it be vsync-active ? > Yes, I'll change it. > >> + /* Active low (Defaults to 0) */ >> + data-active =<0>; > > > and this pclk-sample ? > Yes. >> + }; >> + }; >> + }; >> + ... >> +}; >> diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c >> index a4f0a70..24ce759 100644 >> --- a/drivers/media/i2c/tvp514x.c >> +++ b/drivers/media/i2c/tvp514x.c >> @@ -12,6 +12,7 @@ >> * Hardik Shah<hardik.shah@ti.com> >> * Manjunath Hadli<mrh@ti.com> >> * Karicheri Muralidharan<m-karicheri2@ti.com> >> + * Prabhakar Lad<prabhakar.lad@ti.com> >> * >> * This package is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License version 2 as >> @@ -33,7 +34,9 @@ >> #include<linux/delay.h> >> #include<linux/videodev2.h> >> #include<linux/module.h> >> +#include<linux/of_device.h> >> >> +#include<media/v4l2-of.h> >> #include<media/v4l2-async.h> >> #include<media/v4l2-device.h> >> #include<media/v4l2-common.h> >> @@ -930,6 +933,58 @@ static struct tvp514x_decoder tvp514x_dev = { >> >> }; >> >> +#if defined(CONFIG_OF) >> +static const struct of_device_id tvp514x_of_match[] = { >> + {.compatible = "ti,tvp514x-decoder", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, tvp514x_of_match); >> + >> +static struct tvp514x_platform_data >> + *tvp514x_get_pdata(struct i2c_client *client) >> +{ >> + if (!client->dev.platform_data&& client->dev.of_node) { >> >> + struct tvp514x_platform_data *pdata; >> + struct v4l2_of_endpoint bus_cfg; >> + struct device_node *endpoint; >> + >> + pdata = devm_kzalloc(&client->dev, >> + sizeof(struct tvp514x_platform_data), >> + GFP_KERNEL); >> + client->dev.platform_data = pdata; > > > Do you really need to set client->dev.platform_data this way ? > What about passing struct tvp514x_decoder pointer to this function > and initializing struct tvp514x_decoder::pdata instead ? > > Yes that can work too, I'll do the same. >> + if (!pdata) >> + return NULL; >> + >> + endpoint = of_get_child_by_name(client->dev.of_node, >> "port"); >> + if (endpoint) >> + endpoint = of_get_child_by_name(endpoint, >> "endpoint"); > > > I think you could replace these two calls above with > > endpoint = v4l2_of_get_next_endpoint(client->dev.of_node); > Ok > Now I see I should have modified this function to ensure it works also when > 'port' nodes are grouped in a 'ports' node. > So V5 series of V4l OF parser doesn't have this fix ? Regards, --Prabhakar >> + if (!endpoint) { >> + v4l2_info(client, "Using default data!!\n"); >> + } else { >> + v4l2_of_parse_parallel_bus(endpoint,&bus_cfg); >> + >> + if (bus_cfg.mbus_flags& >> V4L2_MBUS_HSYNC_ACTIVE_HIGH) >> >> + pdata->hs_polarity = 1; >> + if (bus_cfg.mbus_flags& >> V4L2_MBUS_VSYNC_ACTIVE_HIGH) >> >> + pdata->vs_polarity = 1; >> + if (bus_cfg.mbus_flags& >> V4L2_MBUS_PCLK_SAMPLE_RISING) >> >> + pdata->clk_polarity = 1; >> + } >> + } >> + >> + return client->dev.platform_data; >> +} >> +#else >> +#define tvp514x_of_match NULL >> + >> +static struct tvp514x_platform_data >> + *tvp514x_get_pdata(struct i2c_client *client) >> +{ >> + return client->dev.platform_data; >> +} >> +#endif >> + >> /** >> * tvp514x_probe() - decoder driver i2c probe handler >> * @client: i2c driver client device structure >> @@ -941,6 +996,7 @@ static struct tvp514x_decoder tvp514x_dev = { >> static int >> tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) >> { >> + struct tvp514x_platform_data *pdata; >> struct tvp514x_decoder *decoder; >> struct v4l2_subdev *sd; >> int ret; >> @@ -949,22 +1005,25 @@ tvp514x_probe(struct i2c_client *client, const >> struct i2c_device_id *id) >> if (!i2c_check_functionality(client->adapter, >> I2C_FUNC_SMBUS_BYTE_DATA)) >> return -EIO; >> >> + pdata = tvp514x_get_pdata(client); >> + if (!pdata) { >> + v4l2_err(client, "No platform data!!\n"); >> + return -EPROBE_DEFER; >> + } >> + >> decoder = devm_kzalloc(&client->dev, sizeof(*decoder), >> GFP_KERNEL); >> if (!decoder) >> return -ENOMEM; >> >> /* Initialize the tvp514x_decoder with default configuration */ >> *decoder = tvp514x_dev; >> - if (!client->dev.platform_data) { >> - v4l2_err(client, "No platform data!!\n"); >> - return -EPROBE_DEFER; >> - } >> + >> /* Copy default register configuration */ >> memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, >> sizeof(tvp514x_reg_list_default)); >> >> /* Copy board specific information here */ >> - decoder->pdata = client->dev.platform_data; >> + decoder->pdata = pdata; >> >> /** >> * Fetch platform specific data, and configure the >> @@ -1096,6 +1155,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id); >> >> static struct i2c_driver tvp514x_driver = { >> .driver = { >> + .of_match_table = tvp514x_of_match, >> .owner = THIS_MODULE, >> .name = TVP514X_MODULE_NAME, >> }, > > > -- > > Regards, > Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2/3/2013 3:43 PM, Prabhakar Lad wrote: > Hi Sylwester, > > Thanks for the review. > > On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki > <sylvester.nawrocki@gmail.com> wrote: >> Hi Prabhakar, >> >> On 01/29/2013 02:07 PM, Prabhakar Lad wrote: >> [...] >> >>> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >>> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >>> new file mode 100644 >>> index 0000000..55d3ffd >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >>> @@ -0,0 +1,38 @@ >>> +* Texas Instruments TVP514x video decoder >>> + >>> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, >>> single-chip >>> +digital video decoder that digitizes and decodes all popular baseband >>> analog >>> +video formats into digital video component. The tvp514x decoder supports >>> analog- >>> +to-digital (A/D) conversion of component RGB and YPbPr signals as well as >>> A/D >>> +conversion and decoding of NTSC, PAL and SECAM composite and S-video into >>> +component YCbCr. >>> + >>> +Required Properties : >>> +- compatible: Must be "ti,tvp514x-decoder" >> >> >> There are no significant differences among TVP514* devices as listed above, >> you would like to handle above ? >> >> I'm just wondering if you don't need ,for instance, two separate compatible >> properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" ? >> > There are few differences in init/power sequence tough, I would still > like to have > single compatible property "ti,tvp514x-decoder", If you feel we need separate > property I will change it please let me know on this. Compatible properties should not use generic part numbers. See one past discussion here: http://en.usenet.digipedia.org/thread/18472/20788/ Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Prabhakar, On Sunday 03 February 2013 15:43:49 Prabhakar Lad wrote: > On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki wrote: > > On 01/29/2013 02:07 PM, Prabhakar Lad wrote: > > [...] > > > >> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > >> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > >> new file mode 100644 > >> index 0000000..55d3ffd > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > >> @@ -0,0 +1,38 @@ > >> +* Texas Instruments TVP514x video decoder > >> + > >> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, > >> +single-chip digital video decoder that digitizes and decodes all popular > >> +baseband analog video formats into digital video component. The tvp514x > >> +decoder supports analog-to-digital (A/D) conversion of component RGB and > >> +YPbPr signals as well as A/D conversion and decoding of NTSC, PAL and > >> +SECAM composite and S-video into component YCbCr. > >> + > >> +Required Properties : > >> +- compatible: Must be "ti,tvp514x-decoder" > > > > There are no significant differences among TVP514* devices as listed > > above, you would like to handle above ? > > > > I'm just wondering if you don't need, for instance, two separate > > compatible properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" > > ? > > There are few differences in init/power sequence tough, I would still > like to have single compatible property "ti,tvp514x-decoder", If you feel we > need separate property I will change it please let me know on this. If there's any difference between the chips that need to be handled in the driver, using two compatible properties is a good practice. Your driver will then be able to easily differentiate between the two chips, and there's no real drawback in doing so.
Sekhar, On Sun, Feb 3, 2013 at 6:40 PM, Sekhar Nori <nsekhar@ti.com> wrote: > On 2/3/2013 3:43 PM, Prabhakar Lad wrote: >> Hi Sylwester, >> >> Thanks for the review. >> >> On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki >> <sylvester.nawrocki@gmail.com> wrote: >>> Hi Prabhakar, >>> >>> On 01/29/2013 02:07 PM, Prabhakar Lad wrote: >>> [...] >>> >>>> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >>>> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >>>> new file mode 100644 >>>> index 0000000..55d3ffd >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >>>> @@ -0,0 +1,38 @@ >>>> +* Texas Instruments TVP514x video decoder >>>> + >>>> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, >>>> single-chip >>>> +digital video decoder that digitizes and decodes all popular baseband >>>> analog >>>> +video formats into digital video component. The tvp514x decoder supports >>>> analog- >>>> +to-digital (A/D) conversion of component RGB and YPbPr signals as well as >>>> A/D >>>> +conversion and decoding of NTSC, PAL and SECAM composite and S-video into >>>> +component YCbCr. >>>> + >>>> +Required Properties : >>>> +- compatible: Must be "ti,tvp514x-decoder" >>> >>> >>> There are no significant differences among TVP514* devices as listed above, >>> you would like to handle above ? >>> >>> I'm just wondering if you don't need ,for instance, two separate compatible >>> properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" ? >>> >> There are few differences in init/power sequence tough, I would still >> like to have >> single compatible property "ti,tvp514x-decoder", If you feel we need separate >> property I will change it please let me know on this. > > Compatible properties should not use generic part numbers. See one past > discussion here: http://en.usenet.digipedia.org/thread/18472/20788/ > Thanks for the link, I'll have separate compatible properties. Regards, --Prabhakar > Thanks, > Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Laurent, On Sun, Feb 3, 2013 at 6:44 PM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Prabhakar, > > On Sunday 03 February 2013 15:43:49 Prabhakar Lad wrote: >> On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki wrote: >> > On 01/29/2013 02:07 PM, Prabhakar Lad wrote: >> > [...] >> > >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >> >> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >> >> new file mode 100644 >> >> index 0000000..55d3ffd >> >> --- /dev/null >> >> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt >> >> @@ -0,0 +1,38 @@ >> >> +* Texas Instruments TVP514x video decoder >> >> + >> >> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, >> >> +single-chip digital video decoder that digitizes and decodes all popular >> >> +baseband analog video formats into digital video component. The tvp514x >> >> +decoder supports analog-to-digital (A/D) conversion of component RGB and >> >> +YPbPr signals as well as A/D conversion and decoding of NTSC, PAL and >> >> +SECAM composite and S-video into component YCbCr. >> >> + >> >> +Required Properties : >> >> +- compatible: Must be "ti,tvp514x-decoder" >> > >> > There are no significant differences among TVP514* devices as listed >> > above, you would like to handle above ? >> > >> > I'm just wondering if you don't need, for instance, two separate >> > compatible properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" >> > ? >> >> There are few differences in init/power sequence tough, I would still >> like to have single compatible property "ti,tvp514x-decoder", If you feel we >> need separate property I will change it please let me know on this. > > If there's any difference between the chips that need to be handled in the > driver, using two compatible properties is a good practice. Your driver will > then be able to easily differentiate between the two chips, and there's no > real drawback in doing so. > Ok I'll will have separate compatible properties. Regards, --Prabhakar > -- > Regards, > > Laurent Pinchart > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode 100644 index 0000000..55d3ffd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt @@ -0,0 +1,38 @@ +* Texas Instruments TVP514x video decoder + +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip +digital video decoder that digitizes and decodes all popular baseband analog +video formats into digital video component. The tvp514x decoder supports analog- +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM composite and S-video into +component YCbCr. + +Required Properties : +- compatible: Must be "ti,tvp514x-decoder" +- hsync-active: HSYNC Polarity configuration for current interface. +- vsync-active: VSYNC Polarity configuration for current interface. +- data-active: Clock polarity of the current interface. + +Example: + +i2c0@1c22000 { + ... + ... + + tvp514x@5c { + compatible = "ti,tvp514x-decoder"; + reg = <0x5c>; + + port { + tvp514x_1: endpoint { + /* Active high (Defaults to 0) */ + hsync-active = <1>; + /* Active high (Defaults to 0) */ + hsync-active = <1>; + /* Active low (Defaults to 0) */ + data-active = <0>; + }; + }; + }; + ... +}; diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index a4f0a70..24ce759 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -12,6 +12,7 @@ * Hardik Shah <hardik.shah@ti.com> * Manjunath Hadli <mrh@ti.com> * Karicheri Muralidharan <m-karicheri2@ti.com> + * Prabhakar Lad <prabhakar.lad@ti.com> * * This package is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -33,7 +34,9 @@ #include <linux/delay.h> #include <linux/videodev2.h> #include <linux/module.h> +#include <linux/of_device.h> +#include <media/v4l2-of.h> #include <media/v4l2-async.h> #include <media/v4l2-device.h> #include <media/v4l2-common.h> @@ -930,6 +933,58 @@ static struct tvp514x_decoder tvp514x_dev = { }; +#if defined(CONFIG_OF) +static const struct of_device_id tvp514x_of_match[] = { + {.compatible = "ti,tvp514x-decoder", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tvp514x_of_match); + +static struct tvp514x_platform_data + *tvp514x_get_pdata(struct i2c_client *client) +{ + if (!client->dev.platform_data && client->dev.of_node) { + struct tvp514x_platform_data *pdata; + struct v4l2_of_endpoint bus_cfg; + struct device_node *endpoint; + + pdata = devm_kzalloc(&client->dev, + sizeof(struct tvp514x_platform_data), + GFP_KERNEL); + client->dev.platform_data = pdata; + if (!pdata) + return NULL; + + endpoint = of_get_child_by_name(client->dev.of_node, "port"); + if (endpoint) + endpoint = of_get_child_by_name(endpoint, "endpoint"); + + if (!endpoint) { + v4l2_info(client, "Using default data!!\n"); + } else { + v4l2_of_parse_parallel_bus(endpoint, &bus_cfg); + + if (bus_cfg.mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + pdata->hs_polarity = 1; + if (bus_cfg.mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + pdata->vs_polarity = 1; + if (bus_cfg.mbus_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + pdata->clk_polarity = 1; + } + } + + return client->dev.platform_data; +} +#else +#define tvp514x_of_match NULL + +static struct tvp514x_platform_data + *tvp514x_get_pdata(struct i2c_client *client) +{ + return client->dev.platform_data; +} +#endif + /** * tvp514x_probe() - decoder driver i2c probe handler * @client: i2c driver client device structure @@ -941,6 +996,7 @@ static struct tvp514x_decoder tvp514x_dev = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct tvp514x_platform_data *pdata; struct tvp514x_decoder *decoder; struct v4l2_subdev *sd; int ret; @@ -949,22 +1005,25 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; + pdata = tvp514x_get_pdata(client); + if (!pdata) { + v4l2_err(client, "No platform data!!\n"); + return -EPROBE_DEFER; + } + decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); if (!decoder) return -ENOMEM; /* Initialize the tvp514x_decoder with default configuration */ *decoder = tvp514x_dev; - if (!client->dev.platform_data) { - v4l2_err(client, "No platform data!!\n"); - return -EPROBE_DEFER; - } + /* Copy default register configuration */ memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, sizeof(tvp514x_reg_list_default)); /* Copy board specific information here */ - decoder->pdata = client->dev.platform_data; + decoder->pdata = pdata; /** * Fetch platform specific data, and configure the @@ -1096,6 +1155,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id); static struct i2c_driver tvp514x_driver = { .driver = { + .of_match_table = tvp514x_of_match, .owner = THIS_MODULE, .name = TVP514X_MODULE_NAME, },