| Message ID | 1362570838-4737-6-git-send-email-shaik.ameer@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/06/2013 12:53 PM, Shaik Ameer Basha wrote: > This patch adds necessary source definations needed for mipi-csis > driver and adds devicetree node for exynos5250. > > Signed-off-by: Shaik Ameer Basha<shaik.ameer@samsung.com> > --- > arch/arm/boot/dts/exynos5250.dtsi | 18 ++++++++++++++++++ > arch/arm/mach-exynos/clock-exynos5.c | 16 ++++++++++++++-- > arch/arm/mach-exynos/include/mach/map.h | 3 +++ > arch/arm/mach-exynos/mach-exynos5-dt.c | 4 ++++ > 4 files changed, 39 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > index 3a2cd9a..4fff98b 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -47,6 +47,8 @@ > i2c6 =&i2c_6; > i2c7 =&i2c_7; > i2c8 =&i2c_8; > + csis0 =&csis_0; > + csis1 =&csis_1; > }; > > gic:interrupt-controller@10481000 { > @@ -357,4 +359,20 @@ > reg =<0x14450000 0x10000>; > interrupts =<0 94 0>; > }; > + > + csis_0: csis@13C20000 { > + compatible = "samsung,exynos5250-csis"; > + reg =<0x13C20000 0x4000>; > + interrupts =<0 79 0>; > + bus-width =<4>; > + status = "disabled"; > + }; > + > + csis_1: csis@13C30000 { > + compatible = "samsung,exynos5250-csis"; > + reg =<0x13C30000 0x4000>; > + interrupts =<0 80 0>; > + bus-width =<4>; Shouldn't this be 2 ? Anyway what's the point of adding this node here only to move it in a subsequent patch ? I guess you should first add 'camera' node and then have further patches adding relevant device nodes. > + status = "disabled"; > + }; > }; > diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c > index e9d7b80..34a22ff 100644 > --- a/arch/arm/mach-exynos/clock-exynos5.c > +++ b/arch/arm/mach-exynos/clock-exynos5.c This file is already removed in Kukjin's for-next tree. And for dts changes I would start the patch summary line with "ARM: dts:". > @@ -859,6 +859,16 @@ static struct clk exynos5_init_clocks_off[] = { > .enable = exynos5_clk_ip_gscl_ctrl, > .ctrlbit = (1<< 3), > }, { > + .name = "csis", > + .devname = "s5p-mipi-csis.0", > + .enable = exynos5_clk_ip_gscl_ctrl, > + .ctrlbit = (1<< 5), > + }, { > + .name = "csis", > + .devname = "s5p-mipi-csis.1", > + .enable = exynos5_clk_ip_gscl_ctrl, > + .ctrlbit = (1<< 6), > + }, { -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/06/2013 12:53 PM, Shaik Ameer Basha wrote: > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -47,6 +47,8 @@ > i2c6 =&i2c_6; > i2c7 =&i2c_7; > i2c8 =&i2c_8; > + csis0 =&csis_0; > + csis1 =&csis_1; You can drop these aliases if you use my latest patches as indicated in the comment to patch 00/12. > diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c > index e9d7b80..34a22ff 100644 > --- a/arch/arm/mach-exynos/clock-exynos5.c > +++ b/arch/arm/mach-exynos/clock-exynos5.c > @@ -859,6 +859,16 @@ static struct clk exynos5_init_clocks_off[] = { > .enable = exynos5_clk_ip_gscl_ctrl, > .ctrlbit = (1<< 3), > }, { > + .name = "csis", > + .devname = "s5p-mipi-csis.0", > + .enable = exynos5_clk_ip_gscl_ctrl, > + .ctrlbit = (1<< 5), > + }, { Instead you should add relevant clock definitions to the Samsung clocks driver, it's already merged in Kukjin's tree. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sylwester, On Mon, Mar 11, 2013 at 2:24 AM, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote: > On 03/06/2013 12:53 PM, Shaik Ameer Basha wrote: >> >> This patch adds necessary source definations needed for mipi-csis >> driver and adds devicetree node for exynos5250. >> >> Signed-off-by: Shaik Ameer Basha<shaik.ameer@samsung.com> >> --- >> arch/arm/boot/dts/exynos5250.dtsi | 18 ++++++++++++++++++ >> arch/arm/mach-exynos/clock-exynos5.c | 16 ++++++++++++++-- >> arch/arm/mach-exynos/include/mach/map.h | 3 +++ >> arch/arm/mach-exynos/mach-exynos5-dt.c | 4 ++++ >> 4 files changed, 39 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5250.dtsi >> b/arch/arm/boot/dts/exynos5250.dtsi >> index 3a2cd9a..4fff98b 100644 >> --- a/arch/arm/boot/dts/exynos5250.dtsi >> +++ b/arch/arm/boot/dts/exynos5250.dtsi >> @@ -47,6 +47,8 @@ >> i2c6 =&i2c_6; >> i2c7 =&i2c_7; >> i2c8 =&i2c_8; >> + csis0 =&csis_0; >> + csis1 =&csis_1; >> }; >> >> gic:interrupt-controller@10481000 { >> @@ -357,4 +359,20 @@ >> reg =<0x14450000 0x10000>; >> interrupts =<0 94 0>; >> }; >> + >> + csis_0: csis@13C20000 { >> + compatible = "samsung,exynos5250-csis"; >> + reg =<0x13C20000 0x4000>; >> + interrupts =<0 79 0>; >> + bus-width =<4>; >> + status = "disabled"; >> + }; >> + >> + csis_1: csis@13C30000 { >> + compatible = "samsung,exynos5250-csis"; >> + reg =<0x13C30000 0x4000>; >> + interrupts =<0 80 0>; >> + bus-width =<4>; > > > Shouldn't this be 2 ? Anyway what's the point of adding this node here Yes, It has to be 2. Seems some Ctrl+c/v issues. :) > only to move it in a subsequent patch ? I guess you should first add > 'camera' node and then have further patches adding relevant device nodes Ok.. I even got the same comments just before postings. As it was a RFC patch, I just posted this as it is. Definitely, i will modify this in the upcoming version of patches. Regards, Shaik Ameer Basha > > >> + status = "disabled"; >> + }; >> }; > > >> diff --git a/arch/arm/mach-exynos/clock-exynos5.c >> b/arch/arm/mach-exynos/clock-exynos5.c >> index e9d7b80..34a22ff 100644 >> --- a/arch/arm/mach-exynos/clock-exynos5.c >> +++ b/arch/arm/mach-exynos/clock-exynos5.c > > > This file is already removed in Kukjin's for-next tree. > And for dts changes I would start the patch summary line with "ARM: dts:". > > >> @@ -859,6 +859,16 @@ static struct clk exynos5_init_clocks_off[] = { >> .enable = exynos5_clk_ip_gscl_ctrl, >> .ctrlbit = (1<< 3), >> }, { >> + .name = "csis", >> + .devname = "s5p-mipi-csis.0", >> + .enable = exynos5_clk_ip_gscl_ctrl, >> + .ctrlbit = (1<< 5), >> + }, { >> + .name = "csis", >> + .devname = "s5p-mipi-csis.1", >> + .enable = exynos5_clk_ip_gscl_ctrl, >> + .ctrlbit = (1<< 6), >> + }, { -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Mar 11, 2013 at 2:27 AM, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote: > On 03/06/2013 12:53 PM, Shaik Ameer Basha wrote: >> >> --- a/arch/arm/boot/dts/exynos5250.dtsi >> +++ b/arch/arm/boot/dts/exynos5250.dtsi >> @@ -47,6 +47,8 @@ >> i2c6 =&i2c_6; >> i2c7 =&i2c_7; >> i2c8 =&i2c_8; >> + csis0 =&csis_0; >> + csis1 =&csis_1; > > > You can drop these aliases if you use my latest patches as indicated > in the comment to patch 00/12. > Ok. > >> diff --git a/arch/arm/mach-exynos/clock-exynos5.c >> b/arch/arm/mach-exynos/clock-exynos5.c >> index e9d7b80..34a22ff 100644 >> --- a/arch/arm/mach-exynos/clock-exynos5.c >> +++ b/arch/arm/mach-exynos/clock-exynos5.c >> @@ -859,6 +859,16 @@ static struct clk exynos5_init_clocks_off[] = { >> .enable = exynos5_clk_ip_gscl_ctrl, >> .ctrlbit = (1<< 3), >> }, { >> + .name = "csis", >> + .devname = "s5p-mipi-csis.0", >> + .enable = exynos5_clk_ip_gscl_ctrl, >> + .ctrlbit = (1<< 5), >> + }, { > > > Instead you should add relevant clock definitions to the Samsung clocks > driver, > it's already merged in Kukjin's tree. > No Issues, the next version posting will be re-based on the Samsung common clock driver. Regards, Shaik Ameer Basha > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 3a2cd9a..4fff98b 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -47,6 +47,8 @@ i2c6 = &i2c_6; i2c7 = &i2c_7; i2c8 = &i2c_8; + csis0 = &csis_0; + csis1 = &csis_1; }; gic:interrupt-controller@10481000 { @@ -357,4 +359,20 @@ reg = <0x14450000 0x10000>; interrupts = <0 94 0>; }; + + csis_0: csis@13C20000 { + compatible = "samsung,exynos5250-csis"; + reg = <0x13C20000 0x4000>; + interrupts = <0 79 0>; + bus-width = <4>; + status = "disabled"; + }; + + csis_1: csis@13C30000 { + compatible = "samsung,exynos5250-csis"; + reg = <0x13C30000 0x4000>; + interrupts = <0 80 0>; + bus-width = <4>; + status = "disabled"; + }; }; diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index e9d7b80..34a22ff 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -859,6 +859,16 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_gscl_ctrl, .ctrlbit = (1 << 3), }, { + .name = "csis", + .devname = "s5p-mipi-csis.0", + .enable = exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "csis", + .devname = "s5p-mipi-csis.1", + .enable = exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 6), + }, { .name = SYSMMU_CLOCK_NAME, .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), .enable = &exynos5_clk_ip_mfc_ctrl, @@ -1263,9 +1273,10 @@ static struct clksrc_clk exynos5_clksrcs[] = { .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_gscl_wrap", + .name = "sclk_csis", .devname = "s5p-mipi-csis.0", .enable = exynos5_clksrc_mask_gscl_ctrl, + .parent = &exynos5_clk_mout_mpll_user.clk, .ctrlbit = (1 << 24), }, .sources = &exynos5_clkset_group, @@ -1273,9 +1284,10 @@ static struct clksrc_clk exynos5_clksrcs[] = { .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 }, }, { .clk = { - .name = "sclk_gscl_wrap", + .name = "sclk_csis", .devname = "s5p-mipi-csis.1", .enable = exynos5_clksrc_mask_gscl_ctrl, + .parent = &exynos5_clk_mout_mpll_user.clk, .ctrlbit = (1 << 28), }, .sources = &exynos5_clkset_group, diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 1df6abb..c834321 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -177,6 +177,9 @@ #define EXYNOS4_PA_MIPI_CSIS0 0x11880000 #define EXYNOS4_PA_MIPI_CSIS1 0x11890000 +#define EXYNOS5_PA_MIPI_CSIS0 0x13C20000 +#define EXYNOS5_PA_MIPI_CSIS1 0x13C30000 + #define EXYNOS4_PA_FIMD0 0x11C00000 #define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index e99d3d8..c420349 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -104,6 +104,10 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, "exynos-tmu", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-csis", EXYNOS5_PA_MIPI_CSIS0, + "s5p-mipi-csis.0", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-csis", EXYNOS5_PA_MIPI_CSIS1, + "s5p-mipi-csis.1", NULL), {}, };
This patch adds necessary source definations needed for mipi-csis driver and adds devicetree node for exynos5250. Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> --- arch/arm/boot/dts/exynos5250.dtsi | 18 ++++++++++++++++++ arch/arm/mach-exynos/clock-exynos5.c | 16 ++++++++++++++-- arch/arm/mach-exynos/include/mach/map.h | 3 +++ arch/arm/mach-exynos/mach-exynos5-dt.c | 4 ++++ 4 files changed, 39 insertions(+), 2 deletions(-)