Patchwork cx23885: support for card Mygica X8506 DMB-TH

login
register
mail settings
Submitter David Wong
Date May 18, 2009, 8:25 a.m.
Message ID <15ed362e0905180125v649545f0t204ca843e72d2758@mail.gmail.com>
Download mbox | patch
Permalink /patch/24416/
State Accepted
Headers show

Comments

David Wong - May 18, 2009, 8:25 a.m.
This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.

Cheers,
David T.L. Wong
David Wong - May 18, 2009, 8:27 a.m.
Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>

On Mon, May 18, 2009 at 4:25 PM, David Wong <davidtlwong@gmail.com> wrote:
> This patch add cx23885 support for card "Mygica X8506 DMB-TH".
> It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
> same hardware with different branding.
>
> Cheers,
> David T.L. Wong
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff -r c9e2fbabed11 linux/drivers/media/video/cx23885/cx23885-cards.c
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c	Mon May 18 15:14:03 2009 +0800
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c	Mon May 18 15:53:25 2009 +0800
@@ -198,6 +198,10 @@ 
 		.name		= "Hauppauge WinTV-HVR1210",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_MYGICA_X8506] = {
+		.name		= "Mygica X8506 DMB-TH",
+		.portb		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -317,6 +321,10 @@ 
 		.subvendor = 0x0070,
 		.subdevice = 0x2295,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8651,
+		.card      = CX23885_BOARD_MYGICA_X8506,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -707,6 +715,15 @@ 
 		mdelay(20);
 		cx23885_gpio_set(dev, GPIO_9);
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		/* GPIO-1 reset XC5000 */
+		/* GPIO-2 reset LGS8GL5 */
+		cx_set(GP0_IO, 0x00060000);
+		cx_clear(GP0_IO, 0x00000006);
+		mdelay(100);
+		cx_set(GP0_IO, 0x00060006);
+		mdelay(100);
+		break;
 	}
 }
 
@@ -810,6 +827,11 @@ 
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
diff -r c9e2fbabed11 linux/drivers/media/video/cx23885/cx23885-dvb.c
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c	Mon May 18 15:14:03 2009 +0800
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c	Mon May 18 15:53:25 2009 +0800
@@ -50,6 +50,7 @@ 
 #include "lnbh24.h"
 #include "cx24116.h"
 #include "cimax2.h"
+#include "lgs8gxx.h"
 #include "netup-eeprom.h"
 #include "netup-init.h"
 #include "lgdt3305.h"
@@ -417,10 +418,29 @@ 
 	.demod_address = 0x05,
 };
 
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+	.prod = LGS8GXX_PROD_LGS8GL5,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 5380, /* 5.38 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 0,
+	.if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 5380,
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
-	struct cx23885_i2c *i2c_bus = NULL;
+	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
 	struct videobuf_dvb_frontend *fe0;
 	int ret;
 
@@ -742,6 +762,19 @@ 
 			break;
 		}
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&mygica_x8506_lgs8gl5_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(xc5000_attach,
+				fe0->dvb.frontend,
+				&i2c_bus2->i2c_adap,
+				&mygica_x8506_xc5000_config);
+		}
+		break;
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
diff -r c9e2fbabed11 linux/drivers/media/video/cx23885/cx23885.h
--- a/linux/drivers/media/video/cx23885/cx23885.h	Mon May 18 15:14:03 2009 +0800
+++ b/linux/drivers/media/video/cx23885/cx23885.h	Mon May 18 15:53:25 2009 +0800
@@ -76,6 +76,7 @@ 
 #define CX23885_BOARD_HAUPPAUGE_HVR1275        19
 #define CX23885_BOARD_HAUPPAUGE_HVR1255        20
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002