[V3,02/21] thermal: exynos: Bifurcate exynos thermal common and tmu controller code
diff mbox

Message ID 1367931671-3906-3-git-send-email-amit.daniel@samsung.com
State Changes Requested
Delegated to: Eduardo Valentin
Headers show

Commit Message

Amit Kachhap May 7, 2013, 1 p.m. UTC
This code bifurcates exynos thermal implementation into common and sensor
specific parts. The common thermal code interacts with core thermal layer and
core cpufreq cooling parts and is independent of SOC specific driver. This
change is needed to cleanly add support for new TMU sensors.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/Kconfig                 |   20 +-
 drivers/thermal/samsung/Makefile                |    4 +-
 drivers/thermal/samsung/exynos_thermal.c        |  421 +----------------------
 drivers/thermal/samsung/exynos_thermal_common.c |  389 +++++++++++++++++++++
 drivers/thermal/samsung/exynos_thermal_common.h |   83 +++++
 5 files changed, 498 insertions(+), 419 deletions(-)
 create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
 create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h

Comments

Zhang Rui May 7, 2013, 1:41 p.m. UTC | #1
On Tue, 2013-05-07 at 18:30 +0530, Amit Daniel Kachhap wrote:
> This code bifurcates exynos thermal implementation into common and sensor
> specific parts. The common thermal code interacts with core thermal layer and
> core cpufreq cooling parts and is independent of SOC specific driver. This
> change is needed to cleanly add support for new TMU sensors.
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
>  drivers/thermal/samsung/Kconfig                 |   20 +-
>  drivers/thermal/samsung/Makefile                |    4 +-
>  drivers/thermal/samsung/exynos_thermal.c        |  421 +----------------------
>  drivers/thermal/samsung/exynos_thermal_common.c |  389 +++++++++++++++++++++
>  drivers/thermal/samsung/exynos_thermal_common.h |   83 +++++
>  5 files changed, 498 insertions(+), 419 deletions(-)
>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
> 
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> index 2d3d9dc..7857e20 100644
> --- a/drivers/thermal/samsung/Kconfig
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -1,9 +1,17 @@
>  config EXYNOS_THERMAL
> -	tristate "Temperature sensor on Samsung EXYNOS"
> +	tristate "Exynos thermal management unit driver"
>  	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> -	depends on CPU_THERMAL
>  	help
> -	  If you say yes here you get support for TMU (Thermal Management
> -	  Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
> -	  the exynos thermal driver with the core thermal layer and cpu
> -	  cooling API's.
> +	  If you say yes here you get support for the exynos thermal driver
> +	  for exynos4 and exynos5 soc. This driver initialises the TMU, reports
> +	  temperature and handles cooling action if defined. This driver uses
> +	  core thermal API's.
> +
> +config EXYNOS_THERMAL_CORE
> +	bool "Core thermal framework support for EXYNOS SOC's"
> +	depends on EXYNOS_THERMAL
> +	help
> +	  If you say yes here you get support for EXYNOS TMU
> +	  (Thermal Management Unit) common registration/unregistration
> +	  functions to the core thermal layer and also to use the generic
> +	  cpu cooling API's.

I'm still not quite clear what you want to get there.
If EXYNOS_THERMAL=y and EXYNOS_THERMAL_CORE=n, you'll get an Exynos tmu
driver which is not shown in /sys/class/thermal/ and can not be used for
thermal management?

thanks,
rui
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> index 1fe6d93..6227d4f 100644
> --- a/drivers/thermal/samsung/Makefile
> +++ b/drivers/thermal/samsung/Makefile
> @@ -1,4 +1,6 @@
>  #
>  # Samsung thermal specific Makefile
>  #
> -obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
> +obj-$(CONFIG_EXYNOS_THERMAL)			+= exynos_soc_thermal.o
> +exynos_soc_thermal-y				:= exynos_thermal.o
> +exynos_soc_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o
> diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
> index d20ce9e..4c85945 100644
> --- a/drivers/thermal/samsung/exynos_thermal.c
> +++ b/drivers/thermal/samsung/exynos_thermal.c
> @@ -21,23 +21,19 @@
>   *
>   */
>  
> -#include <linux/module.h>
> -#include <linux/err.h>
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/platform_device.h>
> -#include <linux/interrupt.h>
>  #include <linux/clk.h>
> -#include <linux/workqueue.h>
> -#include <linux/sysfs.h>
> -#include <linux/kobject.h>
>  #include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/module.h>
>  #include <linux/mutex.h>
> -#include <linux/platform_data/exynos_thermal.h>
> -#include <linux/thermal.h>
> -#include <linux/cpufreq.h>
> -#include <linux/cpu_cooling.h>
>  #include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +#include "exynos_thermal_common.h"
>  
>  /* Exynos generic registers */
>  #define EXYNOS_TMU_REG_TRIMINFO		0x0
> @@ -88,16 +84,6 @@
>  #define EFUSE_MIN_VALUE 40
>  #define EFUSE_MAX_VALUE 100
>  
> -/* In-kernel thermal framework related macros & definations */
> -#define SENSOR_NAME_LEN	16
> -#define MAX_TRIP_COUNT	8
> -#define MAX_COOLING_DEVICE 4
> -#define MAX_THRESHOLD_LEVS 4
> -
> -#define ACTIVE_INTERVAL 500
> -#define IDLE_INTERVAL 10000
> -#define MCELSIUS	1000
> -
>  #ifdef CONFIG_THERMAL_EMULATION
>  #define EXYNOS_EMUL_TIME	0x57F0
>  #define EXYNOS_EMUL_TIME_SHIFT	16
> @@ -106,17 +92,6 @@
>  #define EXYNOS_EMUL_ENABLE	0x1
>  #endif /* CONFIG_THERMAL_EMULATION */
>  
> -/* CPU Zone information */
> -#define PANIC_ZONE      4
> -#define WARN_ZONE       3
> -#define MONITOR_ZONE    2
> -#define SAFE_ZONE       1
> -
> -#define GET_ZONE(trip) (trip + 2)
> -#define GET_TRIP(zone) (zone - 2)
> -
> -#define EXYNOS_ZONE_COUNT	3
> -
>  struct exynos_tmu_data {
>  	struct exynos_tmu_platform_data *pdata;
>  	struct resource *mem;
> @@ -129,384 +104,6 @@ struct exynos_tmu_data {
>  	u8 temp_error1, temp_error2;
>  };
>  
> -struct	thermal_trip_point_conf {
> -	int trip_val[MAX_TRIP_COUNT];
> -	int trip_count;
> -	u8 trigger_falling;
> -};
> -
> -struct	thermal_cooling_conf {
> -	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> -	int freq_clip_count;
> -};
> -
> -struct thermal_sensor_conf {
> -	char name[SENSOR_NAME_LEN];
> -	int (*read_temperature)(void *data);
> -	int (*write_emul_temp)(void *drv_data, unsigned long temp);
> -	struct thermal_trip_point_conf trip_data;
> -	struct thermal_cooling_conf cooling_data;
> -	void *private_data;
> -};
> -
> -struct exynos_thermal_zone {
> -	enum thermal_device_mode mode;
> -	struct thermal_zone_device *therm_dev;
> -	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> -	unsigned int cool_dev_size;
> -	struct platform_device *exynos4_dev;
> -	struct thermal_sensor_conf *sensor_conf;
> -	bool bind;
> -};
> -
> -static struct exynos_thermal_zone *th_zone;
> -static void exynos_unregister_thermal(void);
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> -
> -/* Get mode callback functions for thermal zone */
> -static int exynos_get_mode(struct thermal_zone_device *thermal,
> -			enum thermal_device_mode *mode)
> -{
> -	if (th_zone)
> -		*mode = th_zone->mode;
> -	return 0;
> -}
> -
> -/* Set mode callback functions for thermal zone */
> -static int exynos_set_mode(struct thermal_zone_device *thermal,
> -			enum thermal_device_mode mode)
> -{
> -	if (!th_zone->therm_dev) {
> -		pr_notice("thermal zone not registered\n");
> -		return 0;
> -	}
> -
> -	mutex_lock(&th_zone->therm_dev->lock);
> -
> -	if (mode == THERMAL_DEVICE_ENABLED &&
> -		!th_zone->sensor_conf->trip_data.trigger_falling)
> -		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> -	else
> -		th_zone->therm_dev->polling_delay = 0;
> -
> -	mutex_unlock(&th_zone->therm_dev->lock);
> -
> -	th_zone->mode = mode;
> -	thermal_zone_device_update(th_zone->therm_dev);
> -	pr_info("thermal polling set for duration=%d msec\n",
> -				th_zone->therm_dev->polling_delay);
> -	return 0;
> -}
> -
> -
> -/* Get trip type callback functions for thermal zone */
> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> -				 enum thermal_trip_type *type)
> -{
> -	switch (GET_ZONE(trip)) {
> -	case MONITOR_ZONE:
> -	case WARN_ZONE:
> -		*type = THERMAL_TRIP_ACTIVE;
> -		break;
> -	case PANIC_ZONE:
> -		*type = THERMAL_TRIP_CRITICAL;
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> -	return 0;
> -}
> -
> -/* Get trip temperature callback functions for thermal zone */
> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> -				unsigned long *temp)
> -{
> -	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> -		return -EINVAL;
> -
> -	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> -	/* convert the temperature into millicelsius */
> -	*temp = *temp * MCELSIUS;
> -
> -	return 0;
> -}
> -
> -/* Get critical temperature callback functions for thermal zone */
> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> -				unsigned long *temp)
> -{
> -	int ret;
> -	/* Panic zone */
> -	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> -	return ret;
> -}
> -
> -/* Bind callback functions for thermal zone */
> -static int exynos_bind(struct thermal_zone_device *thermal,
> -			struct thermal_cooling_device *cdev)
> -{
> -	int ret = 0, i, tab_size, level;
> -	struct freq_clip_table *tab_ptr, *clip_data;
> -	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> -	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> -	tab_size = data->cooling_data.freq_clip_count;
> -
> -	if (tab_ptr == NULL || tab_size == 0)
> -		return -EINVAL;
> -
> -	/* find the cooling device registered*/
> -	for (i = 0; i < th_zone->cool_dev_size; i++)
> -		if (cdev == th_zone->cool_dev[i])
> -			break;
> -
> -	/* No matching cooling device */
> -	if (i == th_zone->cool_dev_size)
> -		return 0;
> -
> -	/* Bind the thermal zone to the cpufreq cooling device */
> -	for (i = 0; i < tab_size; i++) {
> -		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> -		level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
> -		if (level == THERMAL_CSTATE_INVALID)
> -			return 0;
> -		switch (GET_ZONE(i)) {
> -		case MONITOR_ZONE:
> -		case WARN_ZONE:
> -			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> -								level, 0)) {
> -				pr_err("error binding cdev inst %d\n", i);
> -				ret = -EINVAL;
> -			}
> -			th_zone->bind = true;
> -			break;
> -		default:
> -			ret = -EINVAL;
> -		}
> -	}
> -
> -	return ret;
> -}
> -
> -/* Unbind callback functions for thermal zone */
> -static int exynos_unbind(struct thermal_zone_device *thermal,
> -			struct thermal_cooling_device *cdev)
> -{
> -	int ret = 0, i, tab_size;
> -	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> -	if (th_zone->bind == false)
> -		return 0;
> -
> -	tab_size = data->cooling_data.freq_clip_count;
> -
> -	if (tab_size == 0)
> -		return -EINVAL;
> -
> -	/* find the cooling device registered*/
> -	for (i = 0; i < th_zone->cool_dev_size; i++)
> -		if (cdev == th_zone->cool_dev[i])
> -			break;
> -
> -	/* No matching cooling device */
> -	if (i == th_zone->cool_dev_size)
> -		return 0;
> -
> -	/* Bind the thermal zone to the cpufreq cooling device */
> -	for (i = 0; i < tab_size; i++) {
> -		switch (GET_ZONE(i)) {
> -		case MONITOR_ZONE:
> -		case WARN_ZONE:
> -			if (thermal_zone_unbind_cooling_device(thermal, i,
> -								cdev)) {
> -				pr_err("error unbinding cdev inst=%d\n", i);
> -				ret = -EINVAL;
> -			}
> -			th_zone->bind = false;
> -			break;
> -		default:
> -			ret = -EINVAL;
> -		}
> -	}
> -	return ret;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_get_temp(struct thermal_zone_device *thermal,
> -			unsigned long *temp)
> -{
> -	void *data;
> -
> -	if (!th_zone->sensor_conf) {
> -		pr_info("Temperature sensor not initialised\n");
> -		return -EINVAL;
> -	}
> -	data = th_zone->sensor_conf->private_data;
> -	*temp = th_zone->sensor_conf->read_temperature(data);
> -	/* convert the temperature into millicelsius */
> -	*temp = *temp * MCELSIUS;
> -	return 0;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> -						unsigned long temp)
> -{
> -	void *data;
> -	int ret = -EINVAL;
> -
> -	if (!th_zone->sensor_conf) {
> -		pr_info("Temperature sensor not initialised\n");
> -		return -EINVAL;
> -	}
> -	data = th_zone->sensor_conf->private_data;
> -	if (th_zone->sensor_conf->write_emul_temp)
> -		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> -	return ret;
> -}
> -
> -/* Get the temperature trend */
> -static int exynos_get_trend(struct thermal_zone_device *thermal,
> -			int trip, enum thermal_trend *trend)
> -{
> -	int ret;
> -	unsigned long trip_temp;
> -
> -	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (thermal->temperature >= trip_temp)
> -		*trend = THERMAL_TREND_RAISE_FULL;
> -	else
> -		*trend = THERMAL_TREND_DROP_FULL;
> -
> -	return 0;
> -}
> -/* Operation callback functions for thermal zone */
> -static struct thermal_zone_device_ops const exynos_dev_ops = {
> -	.bind = exynos_bind,
> -	.unbind = exynos_unbind,
> -	.get_temp = exynos_get_temp,
> -	.set_emul_temp = exynos_set_emul_temp,
> -	.get_trend = exynos_get_trend,
> -	.get_mode = exynos_get_mode,
> -	.set_mode = exynos_set_mode,
> -	.get_trip_type = exynos_get_trip_type,
> -	.get_trip_temp = exynos_get_trip_temp,
> -	.get_crit_temp = exynos_get_crit_temp,
> -};
> -
> -/*
> - * This function may be called from interrupt based temperature sensor
> - * when threshold is changed.
> - */
> -static void exynos_report_trigger(void)
> -{
> -	unsigned int i;
> -	char data[10];
> -	char *envp[] = { data, NULL };
> -
> -	if (!th_zone || !th_zone->therm_dev)
> -		return;
> -	if (th_zone->bind == false) {
> -		for (i = 0; i < th_zone->cool_dev_size; i++) {
> -			if (!th_zone->cool_dev[i])
> -				continue;
> -			exynos_bind(th_zone->therm_dev,
> -					th_zone->cool_dev[i]);
> -		}
> -	}
> -
> -	thermal_zone_device_update(th_zone->therm_dev);
> -
> -	mutex_lock(&th_zone->therm_dev->lock);
> -	/* Find the level for which trip happened */
> -	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> -		if (th_zone->therm_dev->last_temperature <
> -			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> -			break;
> -	}
> -
> -	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> -		!th_zone->sensor_conf->trip_data.trigger_falling) {
> -		if (i > 0)
> -			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> -		else
> -			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> -	}
> -
> -	snprintf(data, sizeof(data), "%u", i);
> -	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> -	mutex_unlock(&th_zone->therm_dev->lock);
> -}
> -
> -/* Register with the in-kernel thermal management */
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> -{
> -	int ret;
> -	struct cpumask mask_val;
> -
> -	if (!sensor_conf || !sensor_conf->read_temperature) {
> -		pr_err("Temperature sensor not initialised\n");
> -		return -EINVAL;
> -	}
> -
> -	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> -	if (!th_zone)
> -		return -ENOMEM;
> -
> -	th_zone->sensor_conf = sensor_conf;
> -	cpumask_set_cpu(0, &mask_val);
> -	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> -	if (IS_ERR(th_zone->cool_dev[0])) {
> -		pr_err("Failed to register cpufreq cooling device\n");
> -		ret = -EINVAL;
> -		goto err_unregister;
> -	}
> -	th_zone->cool_dev_size++;
> -
> -	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> -			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> -			sensor_conf->trip_data.trigger_falling ?
> -			0 : IDLE_INTERVAL);
> -
> -	if (IS_ERR(th_zone->therm_dev)) {
> -		pr_err("Failed to register thermal zone device\n");
> -		ret = PTR_ERR(th_zone->therm_dev);
> -		goto err_unregister;
> -	}
> -	th_zone->mode = THERMAL_DEVICE_ENABLED;
> -
> -	pr_info("Exynos: Kernel Thermal management registered\n");
> -
> -	return 0;
> -
> -err_unregister:
> -	exynos_unregister_thermal();
> -	return ret;
> -}
> -
> -/* Un-Register with the in-kernel thermal management */
> -static void exynos_unregister_thermal(void)
> -{
> -	int i;
> -
> -	if (!th_zone)
> -		return;
> -
> -	if (th_zone->therm_dev)
> -		thermal_zone_device_unregister(th_zone->therm_dev);
> -
> -	for (i = 0; i < th_zone->cool_dev_size; i++) {
> -		if (th_zone->cool_dev[i])
> -			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> -	}
> -
> -	kfree(th_zone);
> -	pr_info("Exynos: Kernel Thermal management unregistered\n");
> -}
> -
>  /*
>   * TMU treats temperature as a mapped temperature code.
>   * The temperature is converted differently depending on the calibration type.
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> new file mode 100644
> index 0000000..9a57606
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -0,0 +1,389 @@
> +/*
> + * exynos_thermal_common.c - Samsung EXYNOS common thermal file
> + *
> + *  Copyright (C) 2013 Samsung Electronics
> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + *
> + */
> +
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +#include "exynos_thermal_common.h"
> +
> +struct exynos_thermal_zone {
> +	enum thermal_device_mode mode;
> +	struct thermal_zone_device *therm_dev;
> +	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> +	unsigned int cool_dev_size;
> +	struct platform_device *exynos4_dev;
> +	struct thermal_sensor_conf *sensor_conf;
> +	bool bind;
> +};
> +
> +static struct exynos_thermal_zone *th_zone;
> +
> +/* Get mode callback functions for thermal zone */
> +static int exynos_get_mode(struct thermal_zone_device *thermal,
> +			enum thermal_device_mode *mode)
> +{
> +	if (th_zone)
> +		*mode = th_zone->mode;
> +	return 0;
> +}
> +
> +/* Set mode callback functions for thermal zone */
> +static int exynos_set_mode(struct thermal_zone_device *thermal,
> +			enum thermal_device_mode mode)
> +{
> +	if (!th_zone->therm_dev) {
> +		pr_notice("thermal zone not registered\n");
> +		return 0;
> +	}
> +
> +	mutex_lock(&th_zone->therm_dev->lock);
> +
> +	if (mode == THERMAL_DEVICE_ENABLED &&
> +		!th_zone->sensor_conf->trip_data.trigger_falling)
> +		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> +	else
> +		th_zone->therm_dev->polling_delay = 0;
> +
> +	mutex_unlock(&th_zone->therm_dev->lock);
> +
> +	th_zone->mode = mode;
> +	thermal_zone_device_update(th_zone->therm_dev);
> +	pr_info("thermal polling set for duration=%d msec\n",
> +				th_zone->therm_dev->polling_delay);
> +	return 0;
> +}
> +
> +
> +/* Get trip type callback functions for thermal zone */
> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> +				 enum thermal_trip_type *type)
> +{
> +	switch (GET_ZONE(trip)) {
> +	case MONITOR_ZONE:
> +	case WARN_ZONE:
> +		*type = THERMAL_TRIP_ACTIVE;
> +		break;
> +	case PANIC_ZONE:
> +		*type = THERMAL_TRIP_CRITICAL;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +/* Get trip temperature callback functions for thermal zone */
> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> +				unsigned long *temp)
> +{
> +	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> +		return -EINVAL;
> +
> +	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> +	/* convert the temperature into millicelsius */
> +	*temp = *temp * MCELSIUS;
> +
> +	return 0;
> +}
> +
> +/* Get critical temperature callback functions for thermal zone */
> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> +				unsigned long *temp)
> +{
> +	int ret;
> +	/* Panic zone */
> +	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> +	return ret;
> +}
> +
> +/* Bind callback functions for thermal zone */
> +static int exynos_bind(struct thermal_zone_device *thermal,
> +			struct thermal_cooling_device *cdev)
> +{
> +	int ret = 0, i, tab_size, level;
> +	struct freq_clip_table *tab_ptr, *clip_data;
> +	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> +	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> +	tab_size = data->cooling_data.freq_clip_count;
> +
> +	if (tab_ptr == NULL || tab_size == 0)
> +		return -EINVAL;
> +
> +	/* find the cooling device registered*/
> +	for (i = 0; i < th_zone->cool_dev_size; i++)
> +		if (cdev == th_zone->cool_dev[i])
> +			break;
> +
> +	/* No matching cooling device */
> +	if (i == th_zone->cool_dev_size)
> +		return 0;
> +
> +	/* Bind the thermal zone to the cpufreq cooling device */
> +	for (i = 0; i < tab_size; i++) {
> +		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> +		level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
> +		if (level == THERMAL_CSTATE_INVALID)
> +			return 0;
> +		switch (GET_ZONE(i)) {
> +		case MONITOR_ZONE:
> +		case WARN_ZONE:
> +			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> +								level, 0)) {
> +				pr_err("error binding cdev inst %d\n", i);
> +				ret = -EINVAL;
> +			}
> +			th_zone->bind = true;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +/* Unbind callback functions for thermal zone */
> +static int exynos_unbind(struct thermal_zone_device *thermal,
> +			struct thermal_cooling_device *cdev)
> +{
> +	int ret = 0, i, tab_size;
> +	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> +	if (th_zone->bind == false)
> +		return 0;
> +
> +	tab_size = data->cooling_data.freq_clip_count;
> +
> +	if (tab_size == 0)
> +		return -EINVAL;
> +
> +	/* find the cooling device registered*/
> +	for (i = 0; i < th_zone->cool_dev_size; i++)
> +		if (cdev == th_zone->cool_dev[i])
> +			break;
> +
> +	/* No matching cooling device */
> +	if (i == th_zone->cool_dev_size)
> +		return 0;
> +
> +	/* Bind the thermal zone to the cpufreq cooling device */
> +	for (i = 0; i < tab_size; i++) {
> +		switch (GET_ZONE(i)) {
> +		case MONITOR_ZONE:
> +		case WARN_ZONE:
> +			if (thermal_zone_unbind_cooling_device(thermal, i,
> +								cdev)) {
> +				pr_err("error unbinding cdev inst=%d\n", i);
> +				ret = -EINVAL;
> +			}
> +			th_zone->bind = false;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +	}
> +	return ret;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_get_temp(struct thermal_zone_device *thermal,
> +			unsigned long *temp)
> +{
> +	void *data;
> +
> +	if (!th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +	data = th_zone->sensor_conf->private_data;
> +	*temp = th_zone->sensor_conf->read_temperature(data);
> +	/* convert the temperature into millicelsius */
> +	*temp = *temp * MCELSIUS;
> +	return 0;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> +						unsigned long temp)
> +{
> +	void *data;
> +	int ret = -EINVAL;
> +
> +	if (!th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +	data = th_zone->sensor_conf->private_data;
> +	if (th_zone->sensor_conf->write_emul_temp)
> +		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> +	return ret;
> +}
> +
> +/* Get the temperature trend */
> +static int exynos_get_trend(struct thermal_zone_device *thermal,
> +			int trip, enum thermal_trend *trend)
> +{
> +	int ret;
> +	unsigned long trip_temp;
> +
> +	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (thermal->temperature >= trip_temp)
> +		*trend = THERMAL_TREND_RAISE_FULL;
> +	else
> +		*trend = THERMAL_TREND_DROP_FULL;
> +
> +	return 0;
> +}
> +/* Operation callback functions for thermal zone */
> +static struct thermal_zone_device_ops const exynos_dev_ops = {
> +	.bind = exynos_bind,
> +	.unbind = exynos_unbind,
> +	.get_temp = exynos_get_temp,
> +	.set_emul_temp = exynos_set_emul_temp,
> +	.get_trend = exynos_get_trend,
> +	.get_mode = exynos_get_mode,
> +	.set_mode = exynos_set_mode,
> +	.get_trip_type = exynos_get_trip_type,
> +	.get_trip_temp = exynos_get_trip_temp,
> +	.get_crit_temp = exynos_get_crit_temp,
> +};
> +
> +/*
> + * This function may be called from interrupt based temperature sensor
> + * when threshold is changed.
> + */
> +void exynos_report_trigger(void)
> +{
> +	unsigned int i;
> +	char data[10];
> +	char *envp[] = { data, NULL };
> +
> +	if (!th_zone || !th_zone->therm_dev)
> +		return;
> +	if (th_zone->bind == false) {
> +		for (i = 0; i < th_zone->cool_dev_size; i++) {
> +			if (!th_zone->cool_dev[i])
> +				continue;
> +			exynos_bind(th_zone->therm_dev,
> +					th_zone->cool_dev[i]);
> +		}
> +	}
> +
> +	thermal_zone_device_update(th_zone->therm_dev);
> +
> +	mutex_lock(&th_zone->therm_dev->lock);
> +	/* Find the level for which trip happened */
> +	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> +		if (th_zone->therm_dev->last_temperature <
> +			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> +			break;
> +	}
> +
> +	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> +		!th_zone->sensor_conf->trip_data.trigger_falling) {
> +		if (i > 0)
> +			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> +		else
> +			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> +	}
> +
> +	snprintf(data, sizeof(data), "%u", i);
> +	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> +	mutex_unlock(&th_zone->therm_dev->lock);
> +}
> +
> +/* Register with the in-kernel thermal management */
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> +{
> +	int ret;
> +	struct cpumask mask_val;
> +
> +	if (!sensor_conf || !sensor_conf->read_temperature) {
> +		pr_err("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +
> +	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> +	if (!th_zone)
> +		return -ENOMEM;
> +
> +	th_zone->sensor_conf = sensor_conf;
> +	cpumask_set_cpu(0, &mask_val);
> +	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> +	if (IS_ERR(th_zone->cool_dev[0])) {
> +		pr_err("Failed to register cpufreq cooling device\n");
> +		ret = -EINVAL;
> +		goto err_unregister;
> +	}
> +	th_zone->cool_dev_size++;
> +
> +	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> +			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> +			sensor_conf->trip_data.trigger_falling ?
> +			0 : IDLE_INTERVAL);
> +
> +	if (IS_ERR(th_zone->therm_dev)) {
> +		pr_err("Failed to register thermal zone device\n");
> +		ret = PTR_ERR(th_zone->therm_dev);
> +		goto err_unregister;
> +	}
> +	th_zone->mode = THERMAL_DEVICE_ENABLED;
> +
> +	pr_info("Exynos: Kernel Thermal management registered\n");
> +
> +	return 0;
> +
> +err_unregister:
> +	exynos_unregister_thermal();
> +	return ret;
> +}
> +
> +/* Un-Register with the in-kernel thermal management */
> +void exynos_unregister_thermal(void)
> +{
> +	int i;
> +
> +	if (!th_zone)
> +		return;
> +
> +	if (th_zone->therm_dev)
> +		thermal_zone_device_unregister(th_zone->therm_dev);
> +
> +	for (i = 0; i < th_zone->cool_dev_size; i++) {
> +		if (th_zone->cool_dev[i])
> +			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> +	}
> +
> +	kfree(th_zone);
> +	pr_info("Exynos: Kernel Thermal management unregistered\n");
> +}
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> new file mode 100644
> index 0000000..da2add0
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -0,0 +1,83 @@
> +/*
> + * exynos_thermal_common.h - Samsung EXYNOS common header file
> + *
> + *  Copyright (C) 2013 Samsung Electronics
> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + *
> + */
> +
> +#ifndef _LINUX_EXYNOS_THERMAL_COMMON_H
> +#define _LINUX_EXYNOS_THERMAL_COMMON_H
> +
> +/* In-kernel thermal framework related macros & definations */
> +#define SENSOR_NAME_LEN	16
> +#define MAX_TRIP_COUNT	8
> +#define MAX_COOLING_DEVICE 4
> +#define MAX_THRESHOLD_LEVS 4
> +
> +#define ACTIVE_INTERVAL 500
> +#define IDLE_INTERVAL 10000
> +#define MCELSIUS	1000
> +
> +/* CPU Zone information */
> +#define PANIC_ZONE      4
> +#define WARN_ZONE       3
> +#define MONITOR_ZONE    2
> +#define SAFE_ZONE       1
> +
> +#define GET_ZONE(trip) (trip + 2)
> +#define GET_TRIP(zone) (zone - 2)
> +
> +#define EXYNOS_ZONE_COUNT	3
> +
> +struct	thermal_trip_point_conf {
> +	int trip_val[MAX_TRIP_COUNT];
> +	int trip_count;
> +	u8 trigger_falling;
> +};
> +
> +struct	thermal_cooling_conf {
> +	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> +	int freq_clip_count;
> +};
> +
> +struct thermal_sensor_conf {
> +	char name[SENSOR_NAME_LEN];
> +	int (*read_temperature)(void *data);
> +	int (*write_emul_temp)(void *drv_data, unsigned long temp);
> +	struct thermal_trip_point_conf trip_data;
> +	struct thermal_cooling_conf cooling_data;
> +	void *private_data;
> +};
> +
> +/*Functions used exynos based thermal sensor driver*/
> +#ifdef CONFIG_EXYNOS_THERMAL_CORE
> +void exynos_unregister_thermal(void);
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> +void exynos_report_trigger(void);
> +#else
> +static inline void
> +exynos_unregister_thermal(void) { return; }
> +
> +static inline int
> +exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
> +
> +static inline void
> +exynos_report_trigger(void) { return; }
> +
> +#endif /* CONFIG_EXYNOS_COMMON */
> +#endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */


--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Amit Kachhap May 8, 2013, 3:49 a.m. UTC | #2
Hi Rui,

On Tue, May 7, 2013 at 7:11 PM, Zhang Rui <rui.zhang@intel.com> wrote:
> On Tue, 2013-05-07 at 18:30 +0530, Amit Daniel Kachhap wrote:
>> This code bifurcates exynos thermal implementation into common and sensor
>> specific parts. The common thermal code interacts with core thermal layer and
>> core cpufreq cooling parts and is independent of SOC specific driver. This
>> change is needed to cleanly add support for new TMU sensors.
>>
>> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>> ---
>>  drivers/thermal/samsung/Kconfig                 |   20 +-
>>  drivers/thermal/samsung/Makefile                |    4 +-
>>  drivers/thermal/samsung/exynos_thermal.c        |  421 +----------------------
>>  drivers/thermal/samsung/exynos_thermal_common.c |  389 +++++++++++++++++++++
>>  drivers/thermal/samsung/exynos_thermal_common.h |   83 +++++
>>  5 files changed, 498 insertions(+), 419 deletions(-)
>>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
>>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
>>
>> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
>> index 2d3d9dc..7857e20 100644
>> --- a/drivers/thermal/samsung/Kconfig
>> +++ b/drivers/thermal/samsung/Kconfig
>> @@ -1,9 +1,17 @@
>>  config EXYNOS_THERMAL
>> -     tristate "Temperature sensor on Samsung EXYNOS"
>> +     tristate "Exynos thermal management unit driver"
>>       depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
>> -     depends on CPU_THERMAL
>>       help
>> -       If you say yes here you get support for TMU (Thermal Management
>> -       Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
>> -       the exynos thermal driver with the core thermal layer and cpu
>> -       cooling API's.
>> +       If you say yes here you get support for the exynos thermal driver
>> +       for exynos4 and exynos5 soc. This driver initialises the TMU, reports
>> +       temperature and handles cooling action if defined. This driver uses
>> +       core thermal API's.
>> +
>> +config EXYNOS_THERMAL_CORE
>> +     bool "Core thermal framework support for EXYNOS SOC's"
>> +     depends on EXYNOS_THERMAL
>> +     help
>> +       If you say yes here you get support for EXYNOS TMU
>> +       (Thermal Management Unit) common registration/unregistration
>> +       functions to the core thermal layer and also to use the generic
>> +       cpu cooling API's.
>
> I'm still not quite clear what you want to get there.
> If EXYNOS_THERMAL=y and EXYNOS_THERMAL_CORE=n, you'll get an Exynos tmu
> driver which is not shown in /sys/class/thermal/ and can not be used for
> thermal management?
Yes I understood your point.
I have kept separate config entry EXYNOS_THERMAL_CORE to make it
scalable. Say a totally different TMU controller comes which is not
possible to fit in the current exynos_tmu.c file and new file might be
needed but still this new thermal controller can use the thermal core
file. Even for 5440 I had hard time integrating the thermal driver as
it is quite different from the existing driver.
In the current scenario even though EXYNOS_THERMAL_CORE=n, TMU h/w is
initialised and there are other mechanisms to read the temperature
like I2C based but yes as you said full thermal management is not
possible.

Regards,
Amit Daniel
>
> thanks,
> rui
>> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
>> index 1fe6d93..6227d4f 100644
>> --- a/drivers/thermal/samsung/Makefile
>> +++ b/drivers/thermal/samsung/Makefile
>> @@ -1,4 +1,6 @@
>>  #
>>  # Samsung thermal specific Makefile
>>  #
>> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
>> +obj-$(CONFIG_EXYNOS_THERMAL)                 += exynos_soc_thermal.o
>> +exynos_soc_thermal-y                         := exynos_thermal.o
>> +exynos_soc_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o
>> diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
>> index d20ce9e..4c85945 100644
>> --- a/drivers/thermal/samsung/exynos_thermal.c
>> +++ b/drivers/thermal/samsung/exynos_thermal.c
>> @@ -21,23 +21,19 @@
>>   *
>>   */
>>
>> -#include <linux/module.h>
>> -#include <linux/err.h>
>> -#include <linux/kernel.h>
>> -#include <linux/slab.h>
>> -#include <linux/platform_device.h>
>> -#include <linux/interrupt.h>
>>  #include <linux/clk.h>
>> -#include <linux/workqueue.h>
>> -#include <linux/sysfs.h>
>> -#include <linux/kobject.h>
>>  #include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/kernel.h>
>> +#include <linux/kobject.h>
>> +#include <linux/module.h>
>>  #include <linux/mutex.h>
>> -#include <linux/platform_data/exynos_thermal.h>
>> -#include <linux/thermal.h>
>> -#include <linux/cpufreq.h>
>> -#include <linux/cpu_cooling.h>
>>  #include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/platform_data/exynos_thermal.h>
>> +#include <linux/slab.h>
>> +#include <linux/workqueue.h>
>> +#include "exynos_thermal_common.h"
>>
>>  /* Exynos generic registers */
>>  #define EXYNOS_TMU_REG_TRIMINFO              0x0
>> @@ -88,16 +84,6 @@
>>  #define EFUSE_MIN_VALUE 40
>>  #define EFUSE_MAX_VALUE 100
>>
>> -/* In-kernel thermal framework related macros & definations */
>> -#define SENSOR_NAME_LEN      16
>> -#define MAX_TRIP_COUNT       8
>> -#define MAX_COOLING_DEVICE 4
>> -#define MAX_THRESHOLD_LEVS 4
>> -
>> -#define ACTIVE_INTERVAL 500
>> -#define IDLE_INTERVAL 10000
>> -#define MCELSIUS     1000
>> -
>>  #ifdef CONFIG_THERMAL_EMULATION
>>  #define EXYNOS_EMUL_TIME     0x57F0
>>  #define EXYNOS_EMUL_TIME_SHIFT       16
>> @@ -106,17 +92,6 @@
>>  #define EXYNOS_EMUL_ENABLE   0x1
>>  #endif /* CONFIG_THERMAL_EMULATION */
>>
>> -/* CPU Zone information */
>> -#define PANIC_ZONE      4
>> -#define WARN_ZONE       3
>> -#define MONITOR_ZONE    2
>> -#define SAFE_ZONE       1
>> -
>> -#define GET_ZONE(trip) (trip + 2)
>> -#define GET_TRIP(zone) (zone - 2)
>> -
>> -#define EXYNOS_ZONE_COUNT    3
>> -
>>  struct exynos_tmu_data {
>>       struct exynos_tmu_platform_data *pdata;
>>       struct resource *mem;
>> @@ -129,384 +104,6 @@ struct exynos_tmu_data {
>>       u8 temp_error1, temp_error2;
>>  };
>>
>> -struct       thermal_trip_point_conf {
>> -     int trip_val[MAX_TRIP_COUNT];
>> -     int trip_count;
>> -     u8 trigger_falling;
>> -};
>> -
>> -struct       thermal_cooling_conf {
>> -     struct freq_clip_table freq_data[MAX_TRIP_COUNT];
>> -     int freq_clip_count;
>> -};
>> -
>> -struct thermal_sensor_conf {
>> -     char name[SENSOR_NAME_LEN];
>> -     int (*read_temperature)(void *data);
>> -     int (*write_emul_temp)(void *drv_data, unsigned long temp);
>> -     struct thermal_trip_point_conf trip_data;
>> -     struct thermal_cooling_conf cooling_data;
>> -     void *private_data;
>> -};
>> -
>> -struct exynos_thermal_zone {
>> -     enum thermal_device_mode mode;
>> -     struct thermal_zone_device *therm_dev;
>> -     struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
>> -     unsigned int cool_dev_size;
>> -     struct platform_device *exynos4_dev;
>> -     struct thermal_sensor_conf *sensor_conf;
>> -     bool bind;
>> -};
>> -
>> -static struct exynos_thermal_zone *th_zone;
>> -static void exynos_unregister_thermal(void);
>> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
>> -
>> -/* Get mode callback functions for thermal zone */
>> -static int exynos_get_mode(struct thermal_zone_device *thermal,
>> -                     enum thermal_device_mode *mode)
>> -{
>> -     if (th_zone)
>> -             *mode = th_zone->mode;
>> -     return 0;
>> -}
>> -
>> -/* Set mode callback functions for thermal zone */
>> -static int exynos_set_mode(struct thermal_zone_device *thermal,
>> -                     enum thermal_device_mode mode)
>> -{
>> -     if (!th_zone->therm_dev) {
>> -             pr_notice("thermal zone not registered\n");
>> -             return 0;
>> -     }
>> -
>> -     mutex_lock(&th_zone->therm_dev->lock);
>> -
>> -     if (mode == THERMAL_DEVICE_ENABLED &&
>> -             !th_zone->sensor_conf->trip_data.trigger_falling)
>> -             th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> -     else
>> -             th_zone->therm_dev->polling_delay = 0;
>> -
>> -     mutex_unlock(&th_zone->therm_dev->lock);
>> -
>> -     th_zone->mode = mode;
>> -     thermal_zone_device_update(th_zone->therm_dev);
>> -     pr_info("thermal polling set for duration=%d msec\n",
>> -                             th_zone->therm_dev->polling_delay);
>> -     return 0;
>> -}
>> -
>> -
>> -/* Get trip type callback functions for thermal zone */
>> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
>> -                              enum thermal_trip_type *type)
>> -{
>> -     switch (GET_ZONE(trip)) {
>> -     case MONITOR_ZONE:
>> -     case WARN_ZONE:
>> -             *type = THERMAL_TRIP_ACTIVE;
>> -             break;
>> -     case PANIC_ZONE:
>> -             *type = THERMAL_TRIP_CRITICAL;
>> -             break;
>> -     default:
>> -             return -EINVAL;
>> -     }
>> -     return 0;
>> -}
>> -
>> -/* Get trip temperature callback functions for thermal zone */
>> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>> -                             unsigned long *temp)
>> -{
>> -     if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>> -             return -EINVAL;
>> -
>> -     *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>> -     /* convert the temperature into millicelsius */
>> -     *temp = *temp * MCELSIUS;
>> -
>> -     return 0;
>> -}
>> -
>> -/* Get critical temperature callback functions for thermal zone */
>> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>> -                             unsigned long *temp)
>> -{
>> -     int ret;
>> -     /* Panic zone */
>> -     ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>> -     return ret;
>> -}
>> -
>> -/* Bind callback functions for thermal zone */
>> -static int exynos_bind(struct thermal_zone_device *thermal,
>> -                     struct thermal_cooling_device *cdev)
>> -{
>> -     int ret = 0, i, tab_size, level;
>> -     struct freq_clip_table *tab_ptr, *clip_data;
>> -     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> -
>> -     tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
>> -     tab_size = data->cooling_data.freq_clip_count;
>> -
>> -     if (tab_ptr == NULL || tab_size == 0)
>> -             return -EINVAL;
>> -
>> -     /* find the cooling device registered*/
>> -     for (i = 0; i < th_zone->cool_dev_size; i++)
>> -             if (cdev == th_zone->cool_dev[i])
>> -                     break;
>> -
>> -     /* No matching cooling device */
>> -     if (i == th_zone->cool_dev_size)
>> -             return 0;
>> -
>> -     /* Bind the thermal zone to the cpufreq cooling device */
>> -     for (i = 0; i < tab_size; i++) {
>> -             clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
>> -             level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
>> -             if (level == THERMAL_CSTATE_INVALID)
>> -                     return 0;
>> -             switch (GET_ZONE(i)) {
>> -             case MONITOR_ZONE:
>> -             case WARN_ZONE:
>> -                     if (thermal_zone_bind_cooling_device(thermal, i, cdev,
>> -                                                             level, 0)) {
>> -                             pr_err("error binding cdev inst %d\n", i);
>> -                             ret = -EINVAL;
>> -                     }
>> -                     th_zone->bind = true;
>> -                     break;
>> -             default:
>> -                     ret = -EINVAL;
>> -             }
>> -     }
>> -
>> -     return ret;
>> -}
>> -
>> -/* Unbind callback functions for thermal zone */
>> -static int exynos_unbind(struct thermal_zone_device *thermal,
>> -                     struct thermal_cooling_device *cdev)
>> -{
>> -     int ret = 0, i, tab_size;
>> -     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> -
>> -     if (th_zone->bind == false)
>> -             return 0;
>> -
>> -     tab_size = data->cooling_data.freq_clip_count;
>> -
>> -     if (tab_size == 0)
>> -             return -EINVAL;
>> -
>> -     /* find the cooling device registered*/
>> -     for (i = 0; i < th_zone->cool_dev_size; i++)
>> -             if (cdev == th_zone->cool_dev[i])
>> -                     break;
>> -
>> -     /* No matching cooling device */
>> -     if (i == th_zone->cool_dev_size)
>> -             return 0;
>> -
>> -     /* Bind the thermal zone to the cpufreq cooling device */
>> -     for (i = 0; i < tab_size; i++) {
>> -             switch (GET_ZONE(i)) {
>> -             case MONITOR_ZONE:
>> -             case WARN_ZONE:
>> -                     if (thermal_zone_unbind_cooling_device(thermal, i,
>> -                                                             cdev)) {
>> -                             pr_err("error unbinding cdev inst=%d\n", i);
>> -                             ret = -EINVAL;
>> -                     }
>> -                     th_zone->bind = false;
>> -                     break;
>> -             default:
>> -                     ret = -EINVAL;
>> -             }
>> -     }
>> -     return ret;
>> -}
>> -
>> -/* Get temperature callback functions for thermal zone */
>> -static int exynos_get_temp(struct thermal_zone_device *thermal,
>> -                     unsigned long *temp)
>> -{
>> -     void *data;
>> -
>> -     if (!th_zone->sensor_conf) {
>> -             pr_info("Temperature sensor not initialised\n");
>> -             return -EINVAL;
>> -     }
>> -     data = th_zone->sensor_conf->private_data;
>> -     *temp = th_zone->sensor_conf->read_temperature(data);
>> -     /* convert the temperature into millicelsius */
>> -     *temp = *temp * MCELSIUS;
>> -     return 0;
>> -}
>> -
>> -/* Get temperature callback functions for thermal zone */
>> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
>> -                                             unsigned long temp)
>> -{
>> -     void *data;
>> -     int ret = -EINVAL;
>> -
>> -     if (!th_zone->sensor_conf) {
>> -             pr_info("Temperature sensor not initialised\n");
>> -             return -EINVAL;
>> -     }
>> -     data = th_zone->sensor_conf->private_data;
>> -     if (th_zone->sensor_conf->write_emul_temp)
>> -             ret = th_zone->sensor_conf->write_emul_temp(data, temp);
>> -     return ret;
>> -}
>> -
>> -/* Get the temperature trend */
>> -static int exynos_get_trend(struct thermal_zone_device *thermal,
>> -                     int trip, enum thermal_trend *trend)
>> -{
>> -     int ret;
>> -     unsigned long trip_temp;
>> -
>> -     ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
>> -     if (ret < 0)
>> -             return ret;
>> -
>> -     if (thermal->temperature >= trip_temp)
>> -             *trend = THERMAL_TREND_RAISE_FULL;
>> -     else
>> -             *trend = THERMAL_TREND_DROP_FULL;
>> -
>> -     return 0;
>> -}
>> -/* Operation callback functions for thermal zone */
>> -static struct thermal_zone_device_ops const exynos_dev_ops = {
>> -     .bind = exynos_bind,
>> -     .unbind = exynos_unbind,
>> -     .get_temp = exynos_get_temp,
>> -     .set_emul_temp = exynos_set_emul_temp,
>> -     .get_trend = exynos_get_trend,
>> -     .get_mode = exynos_get_mode,
>> -     .set_mode = exynos_set_mode,
>> -     .get_trip_type = exynos_get_trip_type,
>> -     .get_trip_temp = exynos_get_trip_temp,
>> -     .get_crit_temp = exynos_get_crit_temp,
>> -};
>> -
>> -/*
>> - * This function may be called from interrupt based temperature sensor
>> - * when threshold is changed.
>> - */
>> -static void exynos_report_trigger(void)
>> -{
>> -     unsigned int i;
>> -     char data[10];
>> -     char *envp[] = { data, NULL };
>> -
>> -     if (!th_zone || !th_zone->therm_dev)
>> -             return;
>> -     if (th_zone->bind == false) {
>> -             for (i = 0; i < th_zone->cool_dev_size; i++) {
>> -                     if (!th_zone->cool_dev[i])
>> -                             continue;
>> -                     exynos_bind(th_zone->therm_dev,
>> -                                     th_zone->cool_dev[i]);
>> -             }
>> -     }
>> -
>> -     thermal_zone_device_update(th_zone->therm_dev);
>> -
>> -     mutex_lock(&th_zone->therm_dev->lock);
>> -     /* Find the level for which trip happened */
>> -     for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
>> -             if (th_zone->therm_dev->last_temperature <
>> -                     th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
>> -                     break;
>> -     }
>> -
>> -     if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
>> -             !th_zone->sensor_conf->trip_data.trigger_falling) {
>> -             if (i > 0)
>> -                     th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
>> -             else
>> -                     th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> -     }
>> -
>> -     snprintf(data, sizeof(data), "%u", i);
>> -     kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
>> -     mutex_unlock(&th_zone->therm_dev->lock);
>> -}
>> -
>> -/* Register with the in-kernel thermal management */
>> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>> -{
>> -     int ret;
>> -     struct cpumask mask_val;
>> -
>> -     if (!sensor_conf || !sensor_conf->read_temperature) {
>> -             pr_err("Temperature sensor not initialised\n");
>> -             return -EINVAL;
>> -     }
>> -
>> -     th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
>> -     if (!th_zone)
>> -             return -ENOMEM;
>> -
>> -     th_zone->sensor_conf = sensor_conf;
>> -     cpumask_set_cpu(0, &mask_val);
>> -     th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>> -     if (IS_ERR(th_zone->cool_dev[0])) {
>> -             pr_err("Failed to register cpufreq cooling device\n");
>> -             ret = -EINVAL;
>> -             goto err_unregister;
>> -     }
>> -     th_zone->cool_dev_size++;
>> -
>> -     th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
>> -                     EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
>> -                     sensor_conf->trip_data.trigger_falling ?
>> -                     0 : IDLE_INTERVAL);
>> -
>> -     if (IS_ERR(th_zone->therm_dev)) {
>> -             pr_err("Failed to register thermal zone device\n");
>> -             ret = PTR_ERR(th_zone->therm_dev);
>> -             goto err_unregister;
>> -     }
>> -     th_zone->mode = THERMAL_DEVICE_ENABLED;
>> -
>> -     pr_info("Exynos: Kernel Thermal management registered\n");
>> -
>> -     return 0;
>> -
>> -err_unregister:
>> -     exynos_unregister_thermal();
>> -     return ret;
>> -}
>> -
>> -/* Un-Register with the in-kernel thermal management */
>> -static void exynos_unregister_thermal(void)
>> -{
>> -     int i;
>> -
>> -     if (!th_zone)
>> -             return;
>> -
>> -     if (th_zone->therm_dev)
>> -             thermal_zone_device_unregister(th_zone->therm_dev);
>> -
>> -     for (i = 0; i < th_zone->cool_dev_size; i++) {
>> -             if (th_zone->cool_dev[i])
>> -                     cpufreq_cooling_unregister(th_zone->cool_dev[i]);
>> -     }
>> -
>> -     kfree(th_zone);
>> -     pr_info("Exynos: Kernel Thermal management unregistered\n");
>> -}
>> -
>>  /*
>>   * TMU treats temperature as a mapped temperature code.
>>   * The temperature is converted differently depending on the calibration type.
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
>> new file mode 100644
>> index 0000000..9a57606
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
>> @@ -0,0 +1,389 @@
>> +/*
>> + * exynos_thermal_common.c - Samsung EXYNOS common thermal file
>> + *
>> + *  Copyright (C) 2013 Samsung Electronics
>> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
>> + *
>> + */
>> +
>> +#include <linux/cpufreq.h>
>> +#include <linux/cpu_cooling.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/kobject.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_data/exynos_thermal.h>
>> +#include <linux/slab.h>
>> +#include <linux/thermal.h>
>> +#include "exynos_thermal_common.h"
>> +
>> +struct exynos_thermal_zone {
>> +     enum thermal_device_mode mode;
>> +     struct thermal_zone_device *therm_dev;
>> +     struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
>> +     unsigned int cool_dev_size;
>> +     struct platform_device *exynos4_dev;
>> +     struct thermal_sensor_conf *sensor_conf;
>> +     bool bind;
>> +};
>> +
>> +static struct exynos_thermal_zone *th_zone;
>> +
>> +/* Get mode callback functions for thermal zone */
>> +static int exynos_get_mode(struct thermal_zone_device *thermal,
>> +                     enum thermal_device_mode *mode)
>> +{
>> +     if (th_zone)
>> +             *mode = th_zone->mode;
>> +     return 0;
>> +}
>> +
>> +/* Set mode callback functions for thermal zone */
>> +static int exynos_set_mode(struct thermal_zone_device *thermal,
>> +                     enum thermal_device_mode mode)
>> +{
>> +     if (!th_zone->therm_dev) {
>> +             pr_notice("thermal zone not registered\n");
>> +             return 0;
>> +     }
>> +
>> +     mutex_lock(&th_zone->therm_dev->lock);
>> +
>> +     if (mode == THERMAL_DEVICE_ENABLED &&
>> +             !th_zone->sensor_conf->trip_data.trigger_falling)
>> +             th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> +     else
>> +             th_zone->therm_dev->polling_delay = 0;
>> +
>> +     mutex_unlock(&th_zone->therm_dev->lock);
>> +
>> +     th_zone->mode = mode;
>> +     thermal_zone_device_update(th_zone->therm_dev);
>> +     pr_info("thermal polling set for duration=%d msec\n",
>> +                             th_zone->therm_dev->polling_delay);
>> +     return 0;
>> +}
>> +
>> +
>> +/* Get trip type callback functions for thermal zone */
>> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
>> +                              enum thermal_trip_type *type)
>> +{
>> +     switch (GET_ZONE(trip)) {
>> +     case MONITOR_ZONE:
>> +     case WARN_ZONE:
>> +             *type = THERMAL_TRIP_ACTIVE;
>> +             break;
>> +     case PANIC_ZONE:
>> +             *type = THERMAL_TRIP_CRITICAL;
>> +             break;
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +     return 0;
>> +}
>> +
>> +/* Get trip temperature callback functions for thermal zone */
>> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>> +                             unsigned long *temp)
>> +{
>> +     if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>> +             return -EINVAL;
>> +
>> +     *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>> +     /* convert the temperature into millicelsius */
>> +     *temp = *temp * MCELSIUS;
>> +
>> +     return 0;
>> +}
>> +
>> +/* Get critical temperature callback functions for thermal zone */
>> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>> +                             unsigned long *temp)
>> +{
>> +     int ret;
>> +     /* Panic zone */
>> +     ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>> +     return ret;
>> +}
>> +
>> +/* Bind callback functions for thermal zone */
>> +static int exynos_bind(struct thermal_zone_device *thermal,
>> +                     struct thermal_cooling_device *cdev)
>> +{
>> +     int ret = 0, i, tab_size, level;
>> +     struct freq_clip_table *tab_ptr, *clip_data;
>> +     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> +
>> +     tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
>> +     tab_size = data->cooling_data.freq_clip_count;
>> +
>> +     if (tab_ptr == NULL || tab_size == 0)
>> +             return -EINVAL;
>> +
>> +     /* find the cooling device registered*/
>> +     for (i = 0; i < th_zone->cool_dev_size; i++)
>> +             if (cdev == th_zone->cool_dev[i])
>> +                     break;
>> +
>> +     /* No matching cooling device */
>> +     if (i == th_zone->cool_dev_size)
>> +             return 0;
>> +
>> +     /* Bind the thermal zone to the cpufreq cooling device */
>> +     for (i = 0; i < tab_size; i++) {
>> +             clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
>> +             level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
>> +             if (level == THERMAL_CSTATE_INVALID)
>> +                     return 0;
>> +             switch (GET_ZONE(i)) {
>> +             case MONITOR_ZONE:
>> +             case WARN_ZONE:
>> +                     if (thermal_zone_bind_cooling_device(thermal, i, cdev,
>> +                                                             level, 0)) {
>> +                             pr_err("error binding cdev inst %d\n", i);
>> +                             ret = -EINVAL;
>> +                     }
>> +                     th_zone->bind = true;
>> +                     break;
>> +             default:
>> +                     ret = -EINVAL;
>> +             }
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>> +/* Unbind callback functions for thermal zone */
>> +static int exynos_unbind(struct thermal_zone_device *thermal,
>> +                     struct thermal_cooling_device *cdev)
>> +{
>> +     int ret = 0, i, tab_size;
>> +     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> +
>> +     if (th_zone->bind == false)
>> +             return 0;
>> +
>> +     tab_size = data->cooling_data.freq_clip_count;
>> +
>> +     if (tab_size == 0)
>> +             return -EINVAL;
>> +
>> +     /* find the cooling device registered*/
>> +     for (i = 0; i < th_zone->cool_dev_size; i++)
>> +             if (cdev == th_zone->cool_dev[i])
>> +                     break;
>> +
>> +     /* No matching cooling device */
>> +     if (i == th_zone->cool_dev_size)
>> +             return 0;
>> +
>> +     /* Bind the thermal zone to the cpufreq cooling device */
>> +     for (i = 0; i < tab_size; i++) {
>> +             switch (GET_ZONE(i)) {
>> +             case MONITOR_ZONE:
>> +             case WARN_ZONE:
>> +                     if (thermal_zone_unbind_cooling_device(thermal, i,
>> +                                                             cdev)) {
>> +                             pr_err("error unbinding cdev inst=%d\n", i);
>> +                             ret = -EINVAL;
>> +                     }
>> +                     th_zone->bind = false;
>> +                     break;
>> +             default:
>> +                     ret = -EINVAL;
>> +             }
>> +     }
>> +     return ret;
>> +}
>> +
>> +/* Get temperature callback functions for thermal zone */
>> +static int exynos_get_temp(struct thermal_zone_device *thermal,
>> +                     unsigned long *temp)
>> +{
>> +     void *data;
>> +
>> +     if (!th_zone->sensor_conf) {
>> +             pr_info("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +     data = th_zone->sensor_conf->private_data;
>> +     *temp = th_zone->sensor_conf->read_temperature(data);
>> +     /* convert the temperature into millicelsius */
>> +     *temp = *temp * MCELSIUS;
>> +     return 0;
>> +}
>> +
>> +/* Get temperature callback functions for thermal zone */
>> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
>> +                                             unsigned long temp)
>> +{
>> +     void *data;
>> +     int ret = -EINVAL;
>> +
>> +     if (!th_zone->sensor_conf) {
>> +             pr_info("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +     data = th_zone->sensor_conf->private_data;
>> +     if (th_zone->sensor_conf->write_emul_temp)
>> +             ret = th_zone->sensor_conf->write_emul_temp(data, temp);
>> +     return ret;
>> +}
>> +
>> +/* Get the temperature trend */
>> +static int exynos_get_trend(struct thermal_zone_device *thermal,
>> +                     int trip, enum thermal_trend *trend)
>> +{
>> +     int ret;
>> +     unsigned long trip_temp;
>> +
>> +     ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     if (thermal->temperature >= trip_temp)
>> +             *trend = THERMAL_TREND_RAISE_FULL;
>> +     else
>> +             *trend = THERMAL_TREND_DROP_FULL;
>> +
>> +     return 0;
>> +}
>> +/* Operation callback functions for thermal zone */
>> +static struct thermal_zone_device_ops const exynos_dev_ops = {
>> +     .bind = exynos_bind,
>> +     .unbind = exynos_unbind,
>> +     .get_temp = exynos_get_temp,
>> +     .set_emul_temp = exynos_set_emul_temp,
>> +     .get_trend = exynos_get_trend,
>> +     .get_mode = exynos_get_mode,
>> +     .set_mode = exynos_set_mode,
>> +     .get_trip_type = exynos_get_trip_type,
>> +     .get_trip_temp = exynos_get_trip_temp,
>> +     .get_crit_temp = exynos_get_crit_temp,
>> +};
>> +
>> +/*
>> + * This function may be called from interrupt based temperature sensor
>> + * when threshold is changed.
>> + */
>> +void exynos_report_trigger(void)
>> +{
>> +     unsigned int i;
>> +     char data[10];
>> +     char *envp[] = { data, NULL };
>> +
>> +     if (!th_zone || !th_zone->therm_dev)
>> +             return;
>> +     if (th_zone->bind == false) {
>> +             for (i = 0; i < th_zone->cool_dev_size; i++) {
>> +                     if (!th_zone->cool_dev[i])
>> +                             continue;
>> +                     exynos_bind(th_zone->therm_dev,
>> +                                     th_zone->cool_dev[i]);
>> +             }
>> +     }
>> +
>> +     thermal_zone_device_update(th_zone->therm_dev);
>> +
>> +     mutex_lock(&th_zone->therm_dev->lock);
>> +     /* Find the level for which trip happened */
>> +     for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
>> +             if (th_zone->therm_dev->last_temperature <
>> +                     th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
>> +                     break;
>> +     }
>> +
>> +     if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
>> +             !th_zone->sensor_conf->trip_data.trigger_falling) {
>> +             if (i > 0)
>> +                     th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
>> +             else
>> +                     th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> +     }
>> +
>> +     snprintf(data, sizeof(data), "%u", i);
>> +     kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
>> +     mutex_unlock(&th_zone->therm_dev->lock);
>> +}
>> +
>> +/* Register with the in-kernel thermal management */
>> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>> +{
>> +     int ret;
>> +     struct cpumask mask_val;
>> +
>> +     if (!sensor_conf || !sensor_conf->read_temperature) {
>> +             pr_err("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
>> +     if (!th_zone)
>> +             return -ENOMEM;
>> +
>> +     th_zone->sensor_conf = sensor_conf;
>> +     cpumask_set_cpu(0, &mask_val);
>> +     th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>> +     if (IS_ERR(th_zone->cool_dev[0])) {
>> +             pr_err("Failed to register cpufreq cooling device\n");
>> +             ret = -EINVAL;
>> +             goto err_unregister;
>> +     }
>> +     th_zone->cool_dev_size++;
>> +
>> +     th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
>> +                     EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
>> +                     sensor_conf->trip_data.trigger_falling ?
>> +                     0 : IDLE_INTERVAL);
>> +
>> +     if (IS_ERR(th_zone->therm_dev)) {
>> +             pr_err("Failed to register thermal zone device\n");
>> +             ret = PTR_ERR(th_zone->therm_dev);
>> +             goto err_unregister;
>> +     }
>> +     th_zone->mode = THERMAL_DEVICE_ENABLED;
>> +
>> +     pr_info("Exynos: Kernel Thermal management registered\n");
>> +
>> +     return 0;
>> +
>> +err_unregister:
>> +     exynos_unregister_thermal();
>> +     return ret;
>> +}
>> +
>> +/* Un-Register with the in-kernel thermal management */
>> +void exynos_unregister_thermal(void)
>> +{
>> +     int i;
>> +
>> +     if (!th_zone)
>> +             return;
>> +
>> +     if (th_zone->therm_dev)
>> +             thermal_zone_device_unregister(th_zone->therm_dev);
>> +
>> +     for (i = 0; i < th_zone->cool_dev_size; i++) {
>> +             if (th_zone->cool_dev[i])
>> +                     cpufreq_cooling_unregister(th_zone->cool_dev[i]);
>> +     }
>> +
>> +     kfree(th_zone);
>> +     pr_info("Exynos: Kernel Thermal management unregistered\n");
>> +}
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
>> new file mode 100644
>> index 0000000..da2add0
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>> @@ -0,0 +1,83 @@
>> +/*
>> + * exynos_thermal_common.h - Samsung EXYNOS common header file
>> + *
>> + *  Copyright (C) 2013 Samsung Electronics
>> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
>> + *
>> + */
>> +
>> +#ifndef _LINUX_EXYNOS_THERMAL_COMMON_H
>> +#define _LINUX_EXYNOS_THERMAL_COMMON_H
>> +
>> +/* In-kernel thermal framework related macros & definations */
>> +#define SENSOR_NAME_LEN      16
>> +#define MAX_TRIP_COUNT       8
>> +#define MAX_COOLING_DEVICE 4
>> +#define MAX_THRESHOLD_LEVS 4
>> +
>> +#define ACTIVE_INTERVAL 500
>> +#define IDLE_INTERVAL 10000
>> +#define MCELSIUS     1000
>> +
>> +/* CPU Zone information */
>> +#define PANIC_ZONE      4
>> +#define WARN_ZONE       3
>> +#define MONITOR_ZONE    2
>> +#define SAFE_ZONE       1
>> +
>> +#define GET_ZONE(trip) (trip + 2)
>> +#define GET_TRIP(zone) (zone - 2)
>> +
>> +#define EXYNOS_ZONE_COUNT    3
>> +
>> +struct       thermal_trip_point_conf {
>> +     int trip_val[MAX_TRIP_COUNT];
>> +     int trip_count;
>> +     u8 trigger_falling;
>> +};
>> +
>> +struct       thermal_cooling_conf {
>> +     struct freq_clip_table freq_data[MAX_TRIP_COUNT];
>> +     int freq_clip_count;
>> +};
>> +
>> +struct thermal_sensor_conf {
>> +     char name[SENSOR_NAME_LEN];
>> +     int (*read_temperature)(void *data);
>> +     int (*write_emul_temp)(void *drv_data, unsigned long temp);
>> +     struct thermal_trip_point_conf trip_data;
>> +     struct thermal_cooling_conf cooling_data;
>> +     void *private_data;
>> +};
>> +
>> +/*Functions used exynos based thermal sensor driver*/
>> +#ifdef CONFIG_EXYNOS_THERMAL_CORE
>> +void exynos_unregister_thermal(void);
>> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
>> +void exynos_report_trigger(void);
>> +#else
>> +static inline void
>> +exynos_unregister_thermal(void) { return; }
>> +
>> +static inline int
>> +exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
>> +
>> +static inline void
>> +exynos_report_trigger(void) { return; }
>> +
>> +#endif /* CONFIG_EXYNOS_COMMON */
>> +#endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Eduardo Valentin May 8, 2013, 4:01 p.m. UTC | #3
On 07-05-2013 09:00, Amit Daniel Kachhap wrote:
> This code bifurcates exynos thermal implementation into common and sensor
> specific parts. The common thermal code interacts with core thermal layer and
> core cpufreq cooling parts and is independent of SOC specific driver. This
> change is needed to cleanly add support for new TMU sensors.
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
>  drivers/thermal/samsung/Kconfig                 |   20 +-
>  drivers/thermal/samsung/Makefile                |    4 +-
>  drivers/thermal/samsung/exynos_thermal.c        |  421 +----------------------
>  drivers/thermal/samsung/exynos_thermal_common.c |  389 +++++++++++++++++++++
>  drivers/thermal/samsung/exynos_thermal_common.h |   83 +++++
>  5 files changed, 498 insertions(+), 419 deletions(-)
>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
> 
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> index 2d3d9dc..7857e20 100644
> --- a/drivers/thermal/samsung/Kconfig
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -1,9 +1,17 @@
>  config EXYNOS_THERMAL
> -	tristate "Temperature sensor on Samsung EXYNOS"
> +	tristate "Exynos thermal management unit driver"
>  	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> -	depends on CPU_THERMAL
>  	help
> -	  If you say yes here you get support for TMU (Thermal Management
> -	  Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
> -	  the exynos thermal driver with the core thermal layer and cpu
> -	  cooling API's.
> +	  If you say yes here you get support for the exynos thermal driver
> +	  for exynos4 and exynos5 soc. This driver initialises the TMU, reports
> +	  temperature and handles cooling action if defined. This driver uses
> +	  core thermal API's.
> +
> +config EXYNOS_THERMAL_CORE
> +	bool "Core thermal framework support for EXYNOS SOC's"
> +	depends on EXYNOS_THERMAL
> +	help
> +	  If you say yes here you get support for EXYNOS TMU
> +	  (Thermal Management Unit) common registration/unregistration
> +	  functions to the core thermal layer and also to use the generic
> +	  cpu cooling API's.
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> index 1fe6d93..6227d4f 100644
> --- a/drivers/thermal/samsung/Makefile
> +++ b/drivers/thermal/samsung/Makefile
> @@ -1,4 +1,6 @@
>  #
>  # Samsung thermal specific Makefile
>  #
> -obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
> +obj-$(CONFIG_EXYNOS_THERMAL)			+= exynos_soc_thermal.o
> +exynos_soc_thermal-y				:= exynos_thermal.o
> +exynos_soc_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o
> diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
> index d20ce9e..4c85945 100644
> --- a/drivers/thermal/samsung/exynos_thermal.c
> +++ b/drivers/thermal/samsung/exynos_thermal.c
> @@ -21,23 +21,19 @@
>   *
>   */
>  
> -#include <linux/module.h>
> -#include <linux/err.h>
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/platform_device.h>
> -#include <linux/interrupt.h>
>  #include <linux/clk.h>
> -#include <linux/workqueue.h>
> -#include <linux/sysfs.h>
> -#include <linux/kobject.h>
>  #include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/module.h>
>  #include <linux/mutex.h>
> -#include <linux/platform_data/exynos_thermal.h>
> -#include <linux/thermal.h>
> -#include <linux/cpufreq.h>
> -#include <linux/cpu_cooling.h>
>  #include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>

nip: I would recommend a blank line here to separate includes from
include/linux to your locals.

> +#include "exynos_thermal_common.h"

While here, a question on the above is if you really need all the above
includes.

>  
>  /* Exynos generic registers */
>  #define EXYNOS_TMU_REG_TRIMINFO		0x0
> @@ -88,16 +84,6 @@
>  #define EFUSE_MIN_VALUE 40
>  #define EFUSE_MAX_VALUE 100
>  
> -/* In-kernel thermal framework related macros & definations */
> -#define SENSOR_NAME_LEN	16
> -#define MAX_TRIP_COUNT	8
> -#define MAX_COOLING_DEVICE 4
> -#define MAX_THRESHOLD_LEVS 4
> -
> -#define ACTIVE_INTERVAL 500
> -#define IDLE_INTERVAL 10000
> -#define MCELSIUS	1000
> -
>  #ifdef CONFIG_THERMAL_EMULATION
>  #define EXYNOS_EMUL_TIME	0x57F0
>  #define EXYNOS_EMUL_TIME_SHIFT	16
> @@ -106,17 +92,6 @@
>  #define EXYNOS_EMUL_ENABLE	0x1
>  #endif /* CONFIG_THERMAL_EMULATION */
>  
> -/* CPU Zone information */
> -#define PANIC_ZONE      4
> -#define WARN_ZONE       3
> -#define MONITOR_ZONE    2
> -#define SAFE_ZONE       1
> -
> -#define GET_ZONE(trip) (trip + 2)
> -#define GET_TRIP(zone) (zone - 2)
> -
> -#define EXYNOS_ZONE_COUNT	3
> -
>  struct exynos_tmu_data {
>  	struct exynos_tmu_platform_data *pdata;
>  	struct resource *mem;
> @@ -129,384 +104,6 @@ struct exynos_tmu_data {
>  	u8 temp_error1, temp_error2;
>  };
>  
> -struct	thermal_trip_point_conf {
> -	int trip_val[MAX_TRIP_COUNT];
> -	int trip_count;
> -	u8 trigger_falling;
> -};
> -
> -struct	thermal_cooling_conf {
> -	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> -	int freq_clip_count;
> -};
> -
> -struct thermal_sensor_conf {
> -	char name[SENSOR_NAME_LEN];
> -	int (*read_temperature)(void *data);
> -	int (*write_emul_temp)(void *drv_data, unsigned long temp);
> -	struct thermal_trip_point_conf trip_data;
> -	struct thermal_cooling_conf cooling_data;
> -	void *private_data;
> -};
> -
> -struct exynos_thermal_zone {
> -	enum thermal_device_mode mode;
> -	struct thermal_zone_device *therm_dev;
> -	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> -	unsigned int cool_dev_size;
> -	struct platform_device *exynos4_dev;
> -	struct thermal_sensor_conf *sensor_conf;
> -	bool bind;
> -};
> -
> -static struct exynos_thermal_zone *th_zone;
> -static void exynos_unregister_thermal(void);
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> -
> -/* Get mode callback functions for thermal zone */
> -static int exynos_get_mode(struct thermal_zone_device *thermal,
> -			enum thermal_device_mode *mode)
> -{
> -	if (th_zone)
> -		*mode = th_zone->mode;
> -	return 0;
> -}
> -
> -/* Set mode callback functions for thermal zone */
> -static int exynos_set_mode(struct thermal_zone_device *thermal,
> -			enum thermal_device_mode mode)
> -{
> -	if (!th_zone->therm_dev) {
> -		pr_notice("thermal zone not registered\n");
> -		return 0;
> -	}
> -
> -	mutex_lock(&th_zone->therm_dev->lock);
> -
> -	if (mode == THERMAL_DEVICE_ENABLED &&
> -		!th_zone->sensor_conf->trip_data.trigger_falling)
> -		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> -	else
> -		th_zone->therm_dev->polling_delay = 0;
> -
> -	mutex_unlock(&th_zone->therm_dev->lock);
> -
> -	th_zone->mode = mode;
> -	thermal_zone_device_update(th_zone->therm_dev);
> -	pr_info("thermal polling set for duration=%d msec\n",
> -				th_zone->therm_dev->polling_delay);
> -	return 0;
> -}
> -
> -
> -/* Get trip type callback functions for thermal zone */
> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> -				 enum thermal_trip_type *type)
> -{
> -	switch (GET_ZONE(trip)) {
> -	case MONITOR_ZONE:
> -	case WARN_ZONE:
> -		*type = THERMAL_TRIP_ACTIVE;
> -		break;
> -	case PANIC_ZONE:
> -		*type = THERMAL_TRIP_CRITICAL;
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> -	return 0;
> -}
> -
> -/* Get trip temperature callback functions for thermal zone */
> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> -				unsigned long *temp)
> -{
> -	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> -		return -EINVAL;
> -
> -	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> -	/* convert the temperature into millicelsius */
> -	*temp = *temp * MCELSIUS;
> -
> -	return 0;
> -}
> -
> -/* Get critical temperature callback functions for thermal zone */
> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> -				unsigned long *temp)
> -{
> -	int ret;
> -	/* Panic zone */
> -	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> -	return ret;
> -}
> -
> -/* Bind callback functions for thermal zone */
> -static int exynos_bind(struct thermal_zone_device *thermal,
> -			struct thermal_cooling_device *cdev)
> -{
> -	int ret = 0, i, tab_size, level;
> -	struct freq_clip_table *tab_ptr, *clip_data;
> -	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> -	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> -	tab_size = data->cooling_data.freq_clip_count;
> -
> -	if (tab_ptr == NULL || tab_size == 0)
> -		return -EINVAL;
> -
> -	/* find the cooling device registered*/
> -	for (i = 0; i < th_zone->cool_dev_size; i++)
> -		if (cdev == th_zone->cool_dev[i])
> -			break;
> -
> -	/* No matching cooling device */
> -	if (i == th_zone->cool_dev_size)
> -		return 0;
> -
> -	/* Bind the thermal zone to the cpufreq cooling device */
> -	for (i = 0; i < tab_size; i++) {
> -		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> -		level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
> -		if (level == THERMAL_CSTATE_INVALID)
> -			return 0;
> -		switch (GET_ZONE(i)) {
> -		case MONITOR_ZONE:
> -		case WARN_ZONE:
> -			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> -								level, 0)) {
> -				pr_err("error binding cdev inst %d\n", i);
> -				ret = -EINVAL;
> -			}
> -			th_zone->bind = true;
> -			break;
> -		default:
> -			ret = -EINVAL;
> -		}
> -	}
> -
> -	return ret;
> -}
> -
> -/* Unbind callback functions for thermal zone */
> -static int exynos_unbind(struct thermal_zone_device *thermal,
> -			struct thermal_cooling_device *cdev)
> -{
> -	int ret = 0, i, tab_size;
> -	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> -	if (th_zone->bind == false)
> -		return 0;
> -
> -	tab_size = data->cooling_data.freq_clip_count;
> -
> -	if (tab_size == 0)
> -		return -EINVAL;
> -
> -	/* find the cooling device registered*/
> -	for (i = 0; i < th_zone->cool_dev_size; i++)
> -		if (cdev == th_zone->cool_dev[i])
> -			break;
> -
> -	/* No matching cooling device */
> -	if (i == th_zone->cool_dev_size)
> -		return 0;
> -
> -	/* Bind the thermal zone to the cpufreq cooling device */
> -	for (i = 0; i < tab_size; i++) {
> -		switch (GET_ZONE(i)) {
> -		case MONITOR_ZONE:
> -		case WARN_ZONE:
> -			if (thermal_zone_unbind_cooling_device(thermal, i,
> -								cdev)) {
> -				pr_err("error unbinding cdev inst=%d\n", i);
> -				ret = -EINVAL;
> -			}
> -			th_zone->bind = false;
> -			break;
> -		default:
> -			ret = -EINVAL;
> -		}
> -	}
> -	return ret;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_get_temp(struct thermal_zone_device *thermal,
> -			unsigned long *temp)
> -{
> -	void *data;
> -
> -	if (!th_zone->sensor_conf) {
> -		pr_info("Temperature sensor not initialised\n");
> -		return -EINVAL;
> -	}
> -	data = th_zone->sensor_conf->private_data;
> -	*temp = th_zone->sensor_conf->read_temperature(data);
> -	/* convert the temperature into millicelsius */
> -	*temp = *temp * MCELSIUS;
> -	return 0;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> -						unsigned long temp)
> -{
> -	void *data;
> -	int ret = -EINVAL;
> -
> -	if (!th_zone->sensor_conf) {
> -		pr_info("Temperature sensor not initialised\n");
> -		return -EINVAL;
> -	}
> -	data = th_zone->sensor_conf->private_data;
> -	if (th_zone->sensor_conf->write_emul_temp)
> -		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> -	return ret;
> -}
> -
> -/* Get the temperature trend */
> -static int exynos_get_trend(struct thermal_zone_device *thermal,
> -			int trip, enum thermal_trend *trend)
> -{
> -	int ret;
> -	unsigned long trip_temp;
> -
> -	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (thermal->temperature >= trip_temp)
> -		*trend = THERMAL_TREND_RAISE_FULL;
> -	else
> -		*trend = THERMAL_TREND_DROP_FULL;
> -
> -	return 0;
> -}
> -/* Operation callback functions for thermal zone */
> -static struct thermal_zone_device_ops const exynos_dev_ops = {
> -	.bind = exynos_bind,
> -	.unbind = exynos_unbind,
> -	.get_temp = exynos_get_temp,
> -	.set_emul_temp = exynos_set_emul_temp,
> -	.get_trend = exynos_get_trend,
> -	.get_mode = exynos_get_mode,
> -	.set_mode = exynos_set_mode,
> -	.get_trip_type = exynos_get_trip_type,
> -	.get_trip_temp = exynos_get_trip_temp,
> -	.get_crit_temp = exynos_get_crit_temp,
> -};
> -
> -/*
> - * This function may be called from interrupt based temperature sensor
> - * when threshold is changed.
> - */
> -static void exynos_report_trigger(void)
> -{
> -	unsigned int i;
> -	char data[10];
> -	char *envp[] = { data, NULL };
> -
> -	if (!th_zone || !th_zone->therm_dev)
> -		return;
> -	if (th_zone->bind == false) {
> -		for (i = 0; i < th_zone->cool_dev_size; i++) {
> -			if (!th_zone->cool_dev[i])
> -				continue;
> -			exynos_bind(th_zone->therm_dev,
> -					th_zone->cool_dev[i]);
> -		}
> -	}
> -
> -	thermal_zone_device_update(th_zone->therm_dev);
> -
> -	mutex_lock(&th_zone->therm_dev->lock);
> -	/* Find the level for which trip happened */
> -	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> -		if (th_zone->therm_dev->last_temperature <
> -			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> -			break;
> -	}
> -
> -	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> -		!th_zone->sensor_conf->trip_data.trigger_falling) {
> -		if (i > 0)
> -			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> -		else
> -			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> -	}
> -
> -	snprintf(data, sizeof(data), "%u", i);
> -	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> -	mutex_unlock(&th_zone->therm_dev->lock);
> -}
> -
> -/* Register with the in-kernel thermal management */
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> -{
> -	int ret;
> -	struct cpumask mask_val;
> -
> -	if (!sensor_conf || !sensor_conf->read_temperature) {
> -		pr_err("Temperature sensor not initialised\n");
> -		return -EINVAL;
> -	}
> -
> -	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> -	if (!th_zone)
> -		return -ENOMEM;
> -
> -	th_zone->sensor_conf = sensor_conf;
> -	cpumask_set_cpu(0, &mask_val);
> -	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> -	if (IS_ERR(th_zone->cool_dev[0])) {
> -		pr_err("Failed to register cpufreq cooling device\n");
> -		ret = -EINVAL;
> -		goto err_unregister;
> -	}
> -	th_zone->cool_dev_size++;
> -
> -	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> -			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> -			sensor_conf->trip_data.trigger_falling ?
> -			0 : IDLE_INTERVAL);
> -
> -	if (IS_ERR(th_zone->therm_dev)) {
> -		pr_err("Failed to register thermal zone device\n");
> -		ret = PTR_ERR(th_zone->therm_dev);
> -		goto err_unregister;
> -	}
> -	th_zone->mode = THERMAL_DEVICE_ENABLED;
> -
> -	pr_info("Exynos: Kernel Thermal management registered\n");
> -
> -	return 0;
> -
> -err_unregister:
> -	exynos_unregister_thermal();
> -	return ret;
> -}
> -
> -/* Un-Register with the in-kernel thermal management */
> -static void exynos_unregister_thermal(void)
> -{
> -	int i;
> -
> -	if (!th_zone)
> -		return;
> -
> -	if (th_zone->therm_dev)
> -		thermal_zone_device_unregister(th_zone->therm_dev);
> -
> -	for (i = 0; i < th_zone->cool_dev_size; i++) {
> -		if (th_zone->cool_dev[i])
> -			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> -	}
> -
> -	kfree(th_zone);
> -	pr_info("Exynos: Kernel Thermal management unregistered\n");
> -}
> -
>  /*
>   * TMU treats temperature as a mapped temperature code.
>   * The temperature is converted differently depending on the calibration type.
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> new file mode 100644
> index 0000000..9a57606
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -0,0 +1,389 @@
> +/*
> + * exynos_thermal_common.c - Samsung EXYNOS common thermal file
> + *
> + *  Copyright (C) 2013 Samsung Electronics
> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + *
> + */
> +
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +#include "exynos_thermal_common.h"
> +


same comments applies to the above includes.

> +struct exynos_thermal_zone {
> +	enum thermal_device_mode mode;
> +	struct thermal_zone_device *therm_dev;
> +	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> +	unsigned int cool_dev_size;
> +	struct platform_device *exynos4_dev;
> +	struct thermal_sensor_conf *sensor_conf;
> +	bool bind;
> +};
> +
> +static struct exynos_thermal_zone *th_zone;
> +
> +/* Get mode callback functions for thermal zone */
> +static int exynos_get_mode(struct thermal_zone_device *thermal,
> +			enum thermal_device_mode *mode)
> +{
> +	if (th_zone)
> +		*mode = th_zone->mode;
> +	return 0;
> +}
> +
> +/* Set mode callback functions for thermal zone */
> +static int exynos_set_mode(struct thermal_zone_device *thermal,
> +			enum thermal_device_mode mode)
> +{
> +	if (!th_zone->therm_dev) {
> +		pr_notice("thermal zone not registered\n");
> +		return 0;
> +	}
> +
> +	mutex_lock(&th_zone->therm_dev->lock);
> +
> +	if (mode == THERMAL_DEVICE_ENABLED &&
> +		!th_zone->sensor_conf->trip_data.trigger_falling)
> +		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> +	else
> +		th_zone->therm_dev->polling_delay = 0;
> +
> +	mutex_unlock(&th_zone->therm_dev->lock);
> +
> +	th_zone->mode = mode;
> +	thermal_zone_device_update(th_zone->therm_dev);
> +	pr_info("thermal polling set for duration=%d msec\n",
> +				th_zone->therm_dev->polling_delay);

Do you really want to flood your serial line with the above message? I d
say it is at most a pr_debug.

> +	return 0;
> +}
> +
> +
> +/* Get trip type callback functions for thermal zone */
> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> +				 enum thermal_trip_type *type)
> +{
> +	switch (GET_ZONE(trip)) {
> +	case MONITOR_ZONE:
> +	case WARN_ZONE:
> +		*type = THERMAL_TRIP_ACTIVE;
> +		break;
> +	case PANIC_ZONE:
> +		*type = THERMAL_TRIP_CRITICAL;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +/* Get trip temperature callback functions for thermal zone */
> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> +				unsigned long *temp)
> +{
> +	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> +		return -EINVAL;
> +
> +	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> +	/* convert the temperature into millicelsius */
> +	*temp = *temp * MCELSIUS;
> +
> +	return 0;
> +}
> +
> +/* Get critical temperature callback functions for thermal zone */
> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> +				unsigned long *temp)
> +{
> +	int ret;
> +	/* Panic zone */
> +	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> +	return ret;
> +}
> +
> +/* Bind callback functions for thermal zone */
> +static int exynos_bind(struct thermal_zone_device *thermal,
> +			struct thermal_cooling_device *cdev)
> +{
> +	int ret = 0, i, tab_size, level;
> +	struct freq_clip_table *tab_ptr, *clip_data;
> +	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> +	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> +	tab_size = data->cooling_data.freq_clip_count;
> +
> +	if (tab_ptr == NULL || tab_size == 0)
> +		return -EINVAL;
> +
> +	/* find the cooling device registered*/
> +	for (i = 0; i < th_zone->cool_dev_size; i++)
> +		if (cdev == th_zone->cool_dev[i])
> +			break;
> +
> +	/* No matching cooling device */
> +	if (i == th_zone->cool_dev_size)
> +		return 0;
> +
> +	/* Bind the thermal zone to the cpufreq cooling device */
> +	for (i = 0; i < tab_size; i++) {
> +		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> +		level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
> +		if (level == THERMAL_CSTATE_INVALID)
> +			return 0;
> +		switch (GET_ZONE(i)) {
> +		case MONITOR_ZONE:
> +		case WARN_ZONE:
> +			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> +								level, 0)) {
> +				pr_err("error binding cdev inst %d\n", i);
> +				ret = -EINVAL;
> +			}
> +			th_zone->bind = true;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +/* Unbind callback functions for thermal zone */
> +static int exynos_unbind(struct thermal_zone_device *thermal,
> +			struct thermal_cooling_device *cdev)
> +{
> +	int ret = 0, i, tab_size;
> +	struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> +	if (th_zone->bind == false)
> +		return 0;
> +
> +	tab_size = data->cooling_data.freq_clip_count;
> +
> +	if (tab_size == 0)
> +		return -EINVAL;
> +
> +	/* find the cooling device registered*/
> +	for (i = 0; i < th_zone->cool_dev_size; i++)
> +		if (cdev == th_zone->cool_dev[i])
> +			break;
> +
> +	/* No matching cooling device */
> +	if (i == th_zone->cool_dev_size)
> +		return 0;
> +
> +	/* Bind the thermal zone to the cpufreq cooling device */
> +	for (i = 0; i < tab_size; i++) {
> +		switch (GET_ZONE(i)) {
> +		case MONITOR_ZONE:
> +		case WARN_ZONE:
> +			if (thermal_zone_unbind_cooling_device(thermal, i,
> +								cdev)) {
> +				pr_err("error unbinding cdev inst=%d\n", i);
> +				ret = -EINVAL;
> +			}
> +			th_zone->bind = false;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +	}
> +	return ret;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_get_temp(struct thermal_zone_device *thermal,
> +			unsigned long *temp)
> +{
> +	void *data;
> +
> +	if (!th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +	data = th_zone->sensor_conf->private_data;
> +	*temp = th_zone->sensor_conf->read_temperature(data);
> +	/* convert the temperature into millicelsius */
> +	*temp = *temp * MCELSIUS;
> +	return 0;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> +						unsigned long temp)
> +{
> +	void *data;
> +	int ret = -EINVAL;
> +
> +	if (!th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +	data = th_zone->sensor_conf->private_data;
> +	if (th_zone->sensor_conf->write_emul_temp)
> +		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> +	return ret;
> +}
> +
> +/* Get the temperature trend */
> +static int exynos_get_trend(struct thermal_zone_device *thermal,
> +			int trip, enum thermal_trend *trend)
> +{
> +	int ret;
> +	unsigned long trip_temp;
> +
> +	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (thermal->temperature >= trip_temp)
> +		*trend = THERMAL_TREND_RAISE_FULL;
> +	else
> +		*trend = THERMAL_TREND_DROP_FULL;
> +
> +	return 0;
> +}
> +/* Operation callback functions for thermal zone */
> +static struct thermal_zone_device_ops const exynos_dev_ops = {
> +	.bind = exynos_bind,
> +	.unbind = exynos_unbind,
> +	.get_temp = exynos_get_temp,
> +	.set_emul_temp = exynos_set_emul_temp,
> +	.get_trend = exynos_get_trend,
> +	.get_mode = exynos_get_mode,
> +	.set_mode = exynos_set_mode,
> +	.get_trip_type = exynos_get_trip_type,
> +	.get_trip_temp = exynos_get_trip_temp,
> +	.get_crit_temp = exynos_get_crit_temp,
> +};
> +
> +/*
> + * This function may be called from interrupt based temperature sensor
> + * when threshold is changed.
> + */
> +void exynos_report_trigger(void)
> +{
> +	unsigned int i;
> +	char data[10];
> +	char *envp[] = { data, NULL };
> +
> +	if (!th_zone || !th_zone->therm_dev)
> +		return;
> +	if (th_zone->bind == false) {
> +		for (i = 0; i < th_zone->cool_dev_size; i++) {
> +			if (!th_zone->cool_dev[i])
> +				continue;
> +			exynos_bind(th_zone->therm_dev,
> +					th_zone->cool_dev[i]);
> +		}
> +	}
> +
> +	thermal_zone_device_update(th_zone->therm_dev);
> +
> +	mutex_lock(&th_zone->therm_dev->lock);
> +	/* Find the level for which trip happened */
> +	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> +		if (th_zone->therm_dev->last_temperature <
> +			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> +			break;
> +	}
> +
> +	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> +		!th_zone->sensor_conf->trip_data.trigger_falling) {
> +		if (i > 0)
> +			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> +		else
> +			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> +	}
> +
> +	snprintf(data, sizeof(data), "%u", i);
> +	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> +	mutex_unlock(&th_zone->therm_dev->lock);
> +}
> +
> +/* Register with the in-kernel thermal management */
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> +{
> +	int ret;
> +	struct cpumask mask_val;
> +
> +	if (!sensor_conf || !sensor_conf->read_temperature) {
> +		pr_err("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +
> +	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> +	if (!th_zone)
> +		return -ENOMEM;
> +

I d suggest switching to device resource managed allocation.

> +	th_zone->sensor_conf = sensor_conf;
> +	cpumask_set_cpu(0, &mask_val);
> +	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> +	if (IS_ERR(th_zone->cool_dev[0])) {
> +		pr_err("Failed to register cpufreq cooling device\n");
> +		ret = -EINVAL;
> +		goto err_unregister;
> +	}
> +	th_zone->cool_dev_size++;
> +
> +	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> +			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> +			sensor_conf->trip_data.trigger_falling ?
> +			0 : IDLE_INTERVAL);
> +
> +	if (IS_ERR(th_zone->therm_dev)) {
> +		pr_err("Failed to register thermal zone device\n");
> +		ret = PTR_ERR(th_zone->therm_dev);
> +		goto err_unregister;
> +	}
> +	th_zone->mode = THERMAL_DEVICE_ENABLED;
> +
> +	pr_info("Exynos: Kernel Thermal management registered\n");
> +
> +	return 0;
> +
> +err_unregister:
> +	exynos_unregister_thermal();
> +	return ret;
> +}
> +
> +/* Un-Register with the in-kernel thermal management */
> +void exynos_unregister_thermal(void)
> +{
> +	int i;
> +
> +	if (!th_zone)
> +		return;
> +
> +	if (th_zone->therm_dev)
> +		thermal_zone_device_unregister(th_zone->therm_dev);
> +
> +	for (i = 0; i < th_zone->cool_dev_size; i++) {
> +		if (th_zone->cool_dev[i])
> +			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> +	}
> +
> +	kfree(th_zone);
> +	pr_info("Exynos: Kernel Thermal management unregistered\n");
> +}
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> new file mode 100644
> index 0000000..da2add0
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -0,0 +1,83 @@
> +/*
> + * exynos_thermal_common.h - Samsung EXYNOS common header file
> + *
> + *  Copyright (C) 2013 Samsung Electronics
> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + *
> + */
> +
> +#ifndef _LINUX_EXYNOS_THERMAL_COMMON_H
> +#define _LINUX_EXYNOS_THERMAL_COMMON_H
> +

How about simply _EXYNOS_THERMAL_COMMON_H?

> +/* In-kernel thermal framework related macros & definations */
> +#define SENSOR_NAME_LEN	16
> +#define MAX_TRIP_COUNT	8
> +#define MAX_COOLING_DEVICE 4
> +#define MAX_THRESHOLD_LEVS 4
> +
> +#define ACTIVE_INTERVAL 500
> +#define IDLE_INTERVAL 10000
> +#define MCELSIUS	1000
> +
> +/* CPU Zone information */
> +#define PANIC_ZONE      4
> +#define WARN_ZONE       3
> +#define MONITOR_ZONE    2
> +#define SAFE_ZONE       1
> +
> +#define GET_ZONE(trip) (trip + 2)
> +#define GET_TRIP(zone) (zone - 2)
> +
> +#define EXYNOS_ZONE_COUNT	3
> +
> +struct	thermal_trip_point_conf {
> +	int trip_val[MAX_TRIP_COUNT];
> +	int trip_count;
> +	u8 trigger_falling;
> +};
> +
> +struct	thermal_cooling_conf {
> +	struct freq_clip_table freq_data[MAX_TRIP_COUNT];

You need to have the include for the above type

> +	int freq_clip_count;
> +};
> +
> +struct thermal_sensor_conf {
> +	char name[SENSOR_NAME_LEN];
> +	int (*read_temperature)(void *data);
> +	int (*write_emul_temp)(void *drv_data, unsigned long temp);
> +	struct thermal_trip_point_conf trip_data;
> +	struct thermal_cooling_conf cooling_daa;
> +	void *private_data;
> +};
> +
> +/*Functions used exynos based thermal sensor driver*/
> +#ifdef CONFIG_EXYNOS_THERMAL_CORE
> +void exynos_unregister_thermal(void);
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> +void exynos_report_trigger(void);
> +#else
> +static inline void
> +exynos_unregister_thermal(void) { return; }
> +
> +static inline int
> +exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
> +
> +static inline void
> +exynos_report_trigger(void) { return; }
> +
> +#endif /* CONFIG_EXYNOS_COMMON */
> +#endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */
>
Amit Kachhap May 9, 2013, 5:15 a.m. UTC | #4
Hi Eduardo,

Thanks for the review.

On Wed, May 8, 2013 at 9:31 PM, Eduardo Valentin
<eduardo.valentin@ti.com> wrote:
> On 07-05-2013 09:00, Amit Daniel Kachhap wrote:
>> This code bifurcates exynos thermal implementation into common and sensor
>> specific parts. The common thermal code interacts with core thermal layer and
>> core cpufreq cooling parts and is independent of SOC specific driver. This
>> change is needed to cleanly add support for new TMU sensors.
>>
>> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>> ---
>>  drivers/thermal/samsung/Kconfig                 |   20 +-
>>  drivers/thermal/samsung/Makefile                |    4 +-
>>  drivers/thermal/samsung/exynos_thermal.c        |  421 +----------------------
>>  drivers/thermal/samsung/exynos_thermal_common.c |  389 +++++++++++++++++++++
>>  drivers/thermal/samsung/exynos_thermal_common.h |   83 +++++
>>  5 files changed, 498 insertions(+), 419 deletions(-)
>>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
>>  create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
>>
>> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
>> index 2d3d9dc..7857e20 100644
>> --- a/drivers/thermal/samsung/Kconfig
>> +++ b/drivers/thermal/samsung/Kconfig
>> @@ -1,9 +1,17 @@
>>  config EXYNOS_THERMAL
>> -     tristate "Temperature sensor on Samsung EXYNOS"
>> +     tristate "Exynos thermal management unit driver"
>>       depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
>> -     depends on CPU_THERMAL
>>       help
>> -       If you say yes here you get support for TMU (Thermal Management
>> -       Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
>> -       the exynos thermal driver with the core thermal layer and cpu
>> -       cooling API's.
>> +       If you say yes here you get support for the exynos thermal driver
>> +       for exynos4 and exynos5 soc. This driver initialises the TMU, reports
>> +       temperature and handles cooling action if defined. This driver uses
>> +       core thermal API's.
>> +
>> +config EXYNOS_THERMAL_CORE
>> +     bool "Core thermal framework support for EXYNOS SOC's"
>> +     depends on EXYNOS_THERMAL
>> +     help
>> +       If you say yes here you get support for EXYNOS TMU
>> +       (Thermal Management Unit) common registration/unregistration
>> +       functions to the core thermal layer and also to use the generic
>> +       cpu cooling API's.
>> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
>> index 1fe6d93..6227d4f 100644
>> --- a/drivers/thermal/samsung/Makefile
>> +++ b/drivers/thermal/samsung/Makefile
>> @@ -1,4 +1,6 @@
>>  #
>>  # Samsung thermal specific Makefile
>>  #
>> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
>> +obj-$(CONFIG_EXYNOS_THERMAL)                 += exynos_soc_thermal.o
>> +exynos_soc_thermal-y                         := exynos_thermal.o
>> +exynos_soc_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o
>> diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
>> index d20ce9e..4c85945 100644
>> --- a/drivers/thermal/samsung/exynos_thermal.c
>> +++ b/drivers/thermal/samsung/exynos_thermal.c
>> @@ -21,23 +21,19 @@
>>   *
>>   */
>>
>> -#include <linux/module.h>
>> -#include <linux/err.h>
>> -#include <linux/kernel.h>
>> -#include <linux/slab.h>
>> -#include <linux/platform_device.h>
>> -#include <linux/interrupt.h>
>>  #include <linux/clk.h>
>> -#include <linux/workqueue.h>
>> -#include <linux/sysfs.h>
>> -#include <linux/kobject.h>
>>  #include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/kernel.h>
>> +#include <linux/kobject.h>
>> +#include <linux/module.h>
>>  #include <linux/mutex.h>
>> -#include <linux/platform_data/exynos_thermal.h>
>> -#include <linux/thermal.h>
>> -#include <linux/cpufreq.h>
>> -#include <linux/cpu_cooling.h>
>>  #include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/platform_data/exynos_thermal.h>
>> +#include <linux/slab.h>
>> +#include <linux/workqueue.h>
>
> nip: I would recommend a blank line here to separate includes from
> include/linux to your locals.
Ok.
>
>> +#include "exynos_thermal_common.h"
>
> While here, a question on the above is if you really need all the above
> includes.
Yes some includes are redundant. Will remove them.
>
>>
>>  /* Exynos generic registers */
>>  #define EXYNOS_TMU_REG_TRIMINFO              0x0
>> @@ -88,16 +84,6 @@
>>  #define EFUSE_MIN_VALUE 40
>>  #define EFUSE_MAX_VALUE 100
>>
>> -/* In-kernel thermal framework related macros & definations */
>> -#define SENSOR_NAME_LEN      16
>> -#define MAX_TRIP_COUNT       8
>> -#define MAX_COOLING_DEVICE 4
>> -#define MAX_THRESHOLD_LEVS 4
>> -
>> -#define ACTIVE_INTERVAL 500
>> -#define IDLE_INTERVAL 10000
>> -#define MCELSIUS     1000
>> -
>>  #ifdef CONFIG_THERMAL_EMULATION
>>  #define EXYNOS_EMUL_TIME     0x57F0
>>  #define EXYNOS_EMUL_TIME_SHIFT       16
>> @@ -106,17 +92,6 @@
>>  #define EXYNOS_EMUL_ENABLE   0x1
>>  #endif /* CONFIG_THERMAL_EMULATION */
>>
>> -/* CPU Zone information */
>> -#define PANIC_ZONE      4
>> -#define WARN_ZONE       3
>> -#define MONITOR_ZONE    2
>> -#define SAFE_ZONE       1
>> -
>> -#define GET_ZONE(trip) (trip + 2)
>> -#define GET_TRIP(zone) (zone - 2)
>> -
>> -#define EXYNOS_ZONE_COUNT    3
>> -
>>  struct exynos_tmu_data {
>>       struct exynos_tmu_platform_data *pdata;
>>       struct resource *mem;
>> @@ -129,384 +104,6 @@ struct exynos_tmu_data {
>>       u8 temp_error1, temp_error2;
>>  };
>>
>> -struct       thermal_trip_point_conf {
>> -     int trip_val[MAX_TRIP_COUNT];
>> -     int trip_count;
>> -     u8 trigger_falling;
>> -};
>> -
>> -struct       thermal_cooling_conf {
>> -     struct freq_clip_table freq_data[MAX_TRIP_COUNT];
>> -     int freq_clip_count;
>> -};
>> -
>> -struct thermal_sensor_conf {
>> -     char name[SENSOR_NAME_LEN];
>> -     int (*read_temperature)(void *data);
>> -     int (*write_emul_temp)(void *drv_data, unsigned long temp);
>> -     struct thermal_trip_point_conf trip_data;
>> -     struct thermal_cooling_conf cooling_data;
>> -     void *private_data;
>> -};
>> -
>> -struct exynos_thermal_zone {
>> -     enum thermal_device_mode mode;
>> -     struct thermal_zone_device *therm_dev;
>> -     struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
>> -     unsigned int cool_dev_size;
>> -     struct platform_device *exynos4_dev;
>> -     struct thermal_sensor_conf *sensor_conf;
>> -     bool bind;
>> -};
>> -
>> -static struct exynos_thermal_zone *th_zone;
>> -static void exynos_unregister_thermal(void);
>> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
>> -
>> -/* Get mode callback functions for thermal zone */
>> -static int exynos_get_mode(struct thermal_zone_device *thermal,
>> -                     enum thermal_device_mode *mode)
>> -{
>> -     if (th_zone)
>> -             *mode = th_zone->mode;
>> -     return 0;
>> -}
>> -
>> -/* Set mode callback functions for thermal zone */
>> -static int exynos_set_mode(struct thermal_zone_device *thermal,
>> -                     enum thermal_device_mode mode)
>> -{
>> -     if (!th_zone->therm_dev) {
>> -             pr_notice("thermal zone not registered\n");
>> -             return 0;
>> -     }
>> -
>> -     mutex_lock(&th_zone->therm_dev->lock);
>> -
>> -     if (mode == THERMAL_DEVICE_ENABLED &&
>> -             !th_zone->sensor_conf->trip_data.trigger_falling)
>> -             th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> -     else
>> -             th_zone->therm_dev->polling_delay = 0;
>> -
>> -     mutex_unlock(&th_zone->therm_dev->lock);
>> -
>> -     th_zone->mode = mode;
>> -     thermal_zone_device_update(th_zone->therm_dev);
>> -     pr_info("thermal polling set for duration=%d msec\n",
>> -                             th_zone->therm_dev->polling_delay);
>> -     return 0;
>> -}
>> -
>> -
>> -/* Get trip type callback functions for thermal zone */
>> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
>> -                              enum thermal_trip_type *type)
>> -{
>> -     switch (GET_ZONE(trip)) {
>> -     case MONITOR_ZONE:
>> -     case WARN_ZONE:
>> -             *type = THERMAL_TRIP_ACTIVE;
>> -             break;
>> -     case PANIC_ZONE:
>> -             *type = THERMAL_TRIP_CRITICAL;
>> -             break;
>> -     default:
>> -             return -EINVAL;
>> -     }
>> -     return 0;
>> -}
>> -
>> -/* Get trip temperature callback functions for thermal zone */
>> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>> -                             unsigned long *temp)
>> -{
>> -     if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>> -             return -EINVAL;
>> -
>> -     *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>> -     /* convert the temperature into millicelsius */
>> -     *temp = *temp * MCELSIUS;
>> -
>> -     return 0;
>> -}
>> -
>> -/* Get critical temperature callback functions for thermal zone */
>> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>> -                             unsigned long *temp)
>> -{
>> -     int ret;
>> -     /* Panic zone */
>> -     ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>> -     return ret;
>> -}
>> -
>> -/* Bind callback functions for thermal zone */
>> -static int exynos_bind(struct thermal_zone_device *thermal,
>> -                     struct thermal_cooling_device *cdev)
>> -{
>> -     int ret = 0, i, tab_size, level;
>> -     struct freq_clip_table *tab_ptr, *clip_data;
>> -     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> -
>> -     tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
>> -     tab_size = data->cooling_data.freq_clip_count;
>> -
>> -     if (tab_ptr == NULL || tab_size == 0)
>> -             return -EINVAL;
>> -
>> -     /* find the cooling device registered*/
>> -     for (i = 0; i < th_zone->cool_dev_size; i++)
>> -             if (cdev == th_zone->cool_dev[i])
>> -                     break;
>> -
>> -     /* No matching cooling device */
>> -     if (i == th_zone->cool_dev_size)
>> -             return 0;
>> -
>> -     /* Bind the thermal zone to the cpufreq cooling device */
>> -     for (i = 0; i < tab_size; i++) {
>> -             clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
>> -             level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
>> -             if (level == THERMAL_CSTATE_INVALID)
>> -                     return 0;
>> -             switch (GET_ZONE(i)) {
>> -             case MONITOR_ZONE:
>> -             case WARN_ZONE:
>> -                     if (thermal_zone_bind_cooling_device(thermal, i, cdev,
>> -                                                             level, 0)) {
>> -                             pr_err("error binding cdev inst %d\n", i);
>> -                             ret = -EINVAL;
>> -                     }
>> -                     th_zone->bind = true;
>> -                     break;
>> -             default:
>> -                     ret = -EINVAL;
>> -             }
>> -     }
>> -
>> -     return ret;
>> -}
>> -
>> -/* Unbind callback functions for thermal zone */
>> -static int exynos_unbind(struct thermal_zone_device *thermal,
>> -                     struct thermal_cooling_device *cdev)
>> -{
>> -     int ret = 0, i, tab_size;
>> -     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> -
>> -     if (th_zone->bind == false)
>> -             return 0;
>> -
>> -     tab_size = data->cooling_data.freq_clip_count;
>> -
>> -     if (tab_size == 0)
>> -             return -EINVAL;
>> -
>> -     /* find the cooling device registered*/
>> -     for (i = 0; i < th_zone->cool_dev_size; i++)
>> -             if (cdev == th_zone->cool_dev[i])
>> -                     break;
>> -
>> -     /* No matching cooling device */
>> -     if (i == th_zone->cool_dev_size)
>> -             return 0;
>> -
>> -     /* Bind the thermal zone to the cpufreq cooling device */
>> -     for (i = 0; i < tab_size; i++) {
>> -             switch (GET_ZONE(i)) {
>> -             case MONITOR_ZONE:
>> -             case WARN_ZONE:
>> -                     if (thermal_zone_unbind_cooling_device(thermal, i,
>> -                                                             cdev)) {
>> -                             pr_err("error unbinding cdev inst=%d\n", i);
>> -                             ret = -EINVAL;
>> -                     }
>> -                     th_zone->bind = false;
>> -                     break;
>> -             default:
>> -                     ret = -EINVAL;
>> -             }
>> -     }
>> -     return ret;
>> -}
>> -
>> -/* Get temperature callback functions for thermal zone */
>> -static int exynos_get_temp(struct thermal_zone_device *thermal,
>> -                     unsigned long *temp)
>> -{
>> -     void *data;
>> -
>> -     if (!th_zone->sensor_conf) {
>> -             pr_info("Temperature sensor not initialised\n");
>> -             return -EINVAL;
>> -     }
>> -     data = th_zone->sensor_conf->private_data;
>> -     *temp = th_zone->sensor_conf->read_temperature(data);
>> -     /* convert the temperature into millicelsius */
>> -     *temp = *temp * MCELSIUS;
>> -     return 0;
>> -}
>> -
>> -/* Get temperature callback functions for thermal zone */
>> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
>> -                                             unsigned long temp)
>> -{
>> -     void *data;
>> -     int ret = -EINVAL;
>> -
>> -     if (!th_zone->sensor_conf) {
>> -             pr_info("Temperature sensor not initialised\n");
>> -             return -EINVAL;
>> -     }
>> -     data = th_zone->sensor_conf->private_data;
>> -     if (th_zone->sensor_conf->write_emul_temp)
>> -             ret = th_zone->sensor_conf->write_emul_temp(data, temp);
>> -     return ret;
>> -}
>> -
>> -/* Get the temperature trend */
>> -static int exynos_get_trend(struct thermal_zone_device *thermal,
>> -                     int trip, enum thermal_trend *trend)
>> -{
>> -     int ret;
>> -     unsigned long trip_temp;
>> -
>> -     ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
>> -     if (ret < 0)
>> -             return ret;
>> -
>> -     if (thermal->temperature >= trip_temp)
>> -             *trend = THERMAL_TREND_RAISE_FULL;
>> -     else
>> -             *trend = THERMAL_TREND_DROP_FULL;
>> -
>> -     return 0;
>> -}
>> -/* Operation callback functions for thermal zone */
>> -static struct thermal_zone_device_ops const exynos_dev_ops = {
>> -     .bind = exynos_bind,
>> -     .unbind = exynos_unbind,
>> -     .get_temp = exynos_get_temp,
>> -     .set_emul_temp = exynos_set_emul_temp,
>> -     .get_trend = exynos_get_trend,
>> -     .get_mode = exynos_get_mode,
>> -     .set_mode = exynos_set_mode,
>> -     .get_trip_type = exynos_get_trip_type,
>> -     .get_trip_temp = exynos_get_trip_temp,
>> -     .get_crit_temp = exynos_get_crit_temp,
>> -};
>> -
>> -/*
>> - * This function may be called from interrupt based temperature sensor
>> - * when threshold is changed.
>> - */
>> -static void exynos_report_trigger(void)
>> -{
>> -     unsigned int i;
>> -     char data[10];
>> -     char *envp[] = { data, NULL };
>> -
>> -     if (!th_zone || !th_zone->therm_dev)
>> -             return;
>> -     if (th_zone->bind == false) {
>> -             for (i = 0; i < th_zone->cool_dev_size; i++) {
>> -                     if (!th_zone->cool_dev[i])
>> -                             continue;
>> -                     exynos_bind(th_zone->therm_dev,
>> -                                     th_zone->cool_dev[i]);
>> -             }
>> -     }
>> -
>> -     thermal_zone_device_update(th_zone->therm_dev);
>> -
>> -     mutex_lock(&th_zone->therm_dev->lock);
>> -     /* Find the level for which trip happened */
>> -     for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
>> -             if (th_zone->therm_dev->last_temperature <
>> -                     th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
>> -                     break;
>> -     }
>> -
>> -     if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
>> -             !th_zone->sensor_conf->trip_data.trigger_falling) {
>> -             if (i > 0)
>> -                     th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
>> -             else
>> -                     th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> -     }
>> -
>> -     snprintf(data, sizeof(data), "%u", i);
>> -     kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
>> -     mutex_unlock(&th_zone->therm_dev->lock);
>> -}
>> -
>> -/* Register with the in-kernel thermal management */
>> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>> -{
>> -     int ret;
>> -     struct cpumask mask_val;
>> -
>> -     if (!sensor_conf || !sensor_conf->read_temperature) {
>> -             pr_err("Temperature sensor not initialised\n");
>> -             return -EINVAL;
>> -     }
>> -
>> -     th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
>> -     if (!th_zone)
>> -             return -ENOMEM;
>> -
>> -     th_zone->sensor_conf = sensor_conf;
>> -     cpumask_set_cpu(0, &mask_val);
>> -     th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>> -     if (IS_ERR(th_zone->cool_dev[0])) {
>> -             pr_err("Failed to register cpufreq cooling device\n");
>> -             ret = -EINVAL;
>> -             goto err_unregister;
>> -     }
>> -     th_zone->cool_dev_size++;
>> -
>> -     th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
>> -                     EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
>> -                     sensor_conf->trip_data.trigger_falling ?
>> -                     0 : IDLE_INTERVAL);
>> -
>> -     if (IS_ERR(th_zone->therm_dev)) {
>> -             pr_err("Failed to register thermal zone device\n");
>> -             ret = PTR_ERR(th_zone->therm_dev);
>> -             goto err_unregister;
>> -     }
>> -     th_zone->mode = THERMAL_DEVICE_ENABLED;
>> -
>> -     pr_info("Exynos: Kernel Thermal management registered\n");
>> -
>> -     return 0;
>> -
>> -err_unregister:
>> -     exynos_unregister_thermal();
>> -     return ret;
>> -}
>> -
>> -/* Un-Register with the in-kernel thermal management */
>> -static void exynos_unregister_thermal(void)
>> -{
>> -     int i;
>> -
>> -     if (!th_zone)
>> -             return;
>> -
>> -     if (th_zone->therm_dev)
>> -             thermal_zone_device_unregister(th_zone->therm_dev);
>> -
>> -     for (i = 0; i < th_zone->cool_dev_size; i++) {
>> -             if (th_zone->cool_dev[i])
>> -                     cpufreq_cooling_unregister(th_zone->cool_dev[i]);
>> -     }
>> -
>> -     kfree(th_zone);
>> -     pr_info("Exynos: Kernel Thermal management unregistered\n");
>> -}
>> -
>>  /*
>>   * TMU treats temperature as a mapped temperature code.
>>   * The temperature is converted differently depending on the calibration type.
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
>> new file mode 100644
>> index 0000000..9a57606
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
>> @@ -0,0 +1,389 @@
>> +/*
>> + * exynos_thermal_common.c - Samsung EXYNOS common thermal file
>> + *
>> + *  Copyright (C) 2013 Samsung Electronics
>> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
>> + *
>> + */
>> +
>> +#include <linux/cpufreq.h>
>> +#include <linux/cpu_cooling.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/kobject.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_data/exynos_thermal.h>
>> +#include <linux/slab.h>
>> +#include <linux/thermal.h>
>> +#include "exynos_thermal_common.h"
>> +
>
>
> same comments applies to the above includes.
Ok
>
>> +struct exynos_thermal_zone {
>> +     enum thermal_device_mode mode;
>> +     struct thermal_zone_device *therm_dev;
>> +     struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
>> +     unsigned int cool_dev_size;
>> +     struct platform_device *exynos4_dev;
>> +     struct thermal_sensor_conf *sensor_conf;
>> +     bool bind;
>> +};
>> +
>> +static struct exynos_thermal_zone *th_zone;
>> +
>> +/* Get mode callback functions for thermal zone */
>> +static int exynos_get_mode(struct thermal_zone_device *thermal,
>> +                     enum thermal_device_mode *mode)
>> +{
>> +     if (th_zone)
>> +             *mode = th_zone->mode;
>> +     return 0;
>> +}
>> +
>> +/* Set mode callback functions for thermal zone */
>> +static int exynos_set_mode(struct thermal_zone_device *thermal,
>> +                     enum thermal_device_mode mode)
>> +{
>> +     if (!th_zone->therm_dev) {
>> +             pr_notice("thermal zone not registered\n");
>> +             return 0;
>> +     }
>> +
>> +     mutex_lock(&th_zone->therm_dev->lock);
>> +
>> +     if (mode == THERMAL_DEVICE_ENABLED &&
>> +             !th_zone->sensor_conf->trip_data.trigger_falling)
>> +             th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> +     else
>> +             th_zone->therm_dev->polling_delay = 0;
>> +
>> +     mutex_unlock(&th_zone->therm_dev->lock);
>> +
>> +     th_zone->mode = mode;
>> +     thermal_zone_device_update(th_zone->therm_dev);
>> +     pr_info("thermal polling set for duration=%d msec\n",
>> +                             th_zone->therm_dev->polling_delay);
>
> Do you really want to flood your serial line with the above message? I d
> say it is at most a pr_debug.
ok pr_debug is fine.
>
>> +     return 0;
>> +}
>> +
>> +
>> +/* Get trip type callback functions for thermal zone */
>> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
>> +                              enum thermal_trip_type *type)
>> +{
>> +     switch (GET_ZONE(trip)) {
>> +     case MONITOR_ZONE:
>> +     case WARN_ZONE:
>> +             *type = THERMAL_TRIP_ACTIVE;
>> +             break;
>> +     case PANIC_ZONE:
>> +             *type = THERMAL_TRIP_CRITICAL;
>> +             break;
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +     return 0;
>> +}
>> +
>> +/* Get trip temperature callback functions for thermal zone */
>> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>> +                             unsigned long *temp)
>> +{
>> +     if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>> +             return -EINVAL;
>> +
>> +     *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>> +     /* convert the temperature into millicelsius */
>> +     *temp = *temp * MCELSIUS;
>> +
>> +     return 0;
>> +}
>> +
>> +/* Get critical temperature callback functions for thermal zone */
>> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>> +                             unsigned long *temp)
>> +{
>> +     int ret;
>> +     /* Panic zone */
>> +     ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>> +     return ret;
>> +}
>> +
>> +/* Bind callback functions for thermal zone */
>> +static int exynos_bind(struct thermal_zone_device *thermal,
>> +                     struct thermal_cooling_device *cdev)
>> +{
>> +     int ret = 0, i, tab_size, level;
>> +     struct freq_clip_table *tab_ptr, *clip_data;
>> +     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> +
>> +     tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
>> +     tab_size = data->cooling_data.freq_clip_count;
>> +
>> +     if (tab_ptr == NULL || tab_size == 0)
>> +             return -EINVAL;
>> +
>> +     /* find the cooling device registered*/
>> +     for (i = 0; i < th_zone->cool_dev_size; i++)
>> +             if (cdev == th_zone->cool_dev[i])
>> +                     break;
>> +
>> +     /* No matching cooling device */
>> +     if (i == th_zone->cool_dev_size)
>> +             return 0;
>> +
>> +     /* Bind the thermal zone to the cpufreq cooling device */
>> +     for (i = 0; i < tab_size; i++) {
>> +             clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
>> +             level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
>> +             if (level == THERMAL_CSTATE_INVALID)
>> +                     return 0;
>> +             switch (GET_ZONE(i)) {
>> +             case MONITOR_ZONE:
>> +             case WARN_ZONE:
>> +                     if (thermal_zone_bind_cooling_device(thermal, i, cdev,
>> +                                                             level, 0)) {
>> +                             pr_err("error binding cdev inst %d\n", i);
>> +                             ret = -EINVAL;
>> +                     }
>> +                     th_zone->bind = true;
>> +                     break;
>> +             default:
>> +                     ret = -EINVAL;
>> +             }
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>> +/* Unbind callback functions for thermal zone */
>> +static int exynos_unbind(struct thermal_zone_device *thermal,
>> +                     struct thermal_cooling_device *cdev)
>> +{
>> +     int ret = 0, i, tab_size;
>> +     struct thermal_sensor_conf *data = th_zone->sensor_conf;
>> +
>> +     if (th_zone->bind == false)
>> +             return 0;
>> +
>> +     tab_size = data->cooling_data.freq_clip_count;
>> +
>> +     if (tab_size == 0)
>> +             return -EINVAL;
>> +
>> +     /* find the cooling device registered*/
>> +     for (i = 0; i < th_zone->cool_dev_size; i++)
>> +             if (cdev == th_zone->cool_dev[i])
>> +                     break;
>> +
>> +     /* No matching cooling device */
>> +     if (i == th_zone->cool_dev_size)
>> +             return 0;
>> +
>> +     /* Bind the thermal zone to the cpufreq cooling device */
>> +     for (i = 0; i < tab_size; i++) {
>> +             switch (GET_ZONE(i)) {
>> +             case MONITOR_ZONE:
>> +             case WARN_ZONE:
>> +                     if (thermal_zone_unbind_cooling_device(thermal, i,
>> +                                                             cdev)) {
>> +                             pr_err("error unbinding cdev inst=%d\n", i);
>> +                             ret = -EINVAL;
>> +                     }
>> +                     th_zone->bind = false;
>> +                     break;
>> +             default:
>> +                     ret = -EINVAL;
>> +             }
>> +     }
>> +     return ret;
>> +}
>> +
>> +/* Get temperature callback functions for thermal zone */
>> +static int exynos_get_temp(struct thermal_zone_device *thermal,
>> +                     unsigned long *temp)
>> +{
>> +     void *data;
>> +
>> +     if (!th_zone->sensor_conf) {
>> +             pr_info("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +     data = th_zone->sensor_conf->private_data;
>> +     *temp = th_zone->sensor_conf->read_temperature(data);
>> +     /* convert the temperature into millicelsius */
>> +     *temp = *temp * MCELSIUS;
>> +     return 0;
>> +}
>> +
>> +/* Get temperature callback functions for thermal zone */
>> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
>> +                                             unsigned long temp)
>> +{
>> +     void *data;
>> +     int ret = -EINVAL;
>> +
>> +     if (!th_zone->sensor_conf) {
>> +             pr_info("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +     data = th_zone->sensor_conf->private_data;
>> +     if (th_zone->sensor_conf->write_emul_temp)
>> +             ret = th_zone->sensor_conf->write_emul_temp(data, temp);
>> +     return ret;
>> +}
>> +
>> +/* Get the temperature trend */
>> +static int exynos_get_trend(struct thermal_zone_device *thermal,
>> +                     int trip, enum thermal_trend *trend)
>> +{
>> +     int ret;
>> +     unsigned long trip_temp;
>> +
>> +     ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     if (thermal->temperature >= trip_temp)
>> +             *trend = THERMAL_TREND_RAISE_FULL;
>> +     else
>> +             *trend = THERMAL_TREND_DROP_FULL;
>> +
>> +     return 0;
>> +}
>> +/* Operation callback functions for thermal zone */
>> +static struct thermal_zone_device_ops const exynos_dev_ops = {
>> +     .bind = exynos_bind,
>> +     .unbind = exynos_unbind,
>> +     .get_temp = exynos_get_temp,
>> +     .set_emul_temp = exynos_set_emul_temp,
>> +     .get_trend = exynos_get_trend,
>> +     .get_mode = exynos_get_mode,
>> +     .set_mode = exynos_set_mode,
>> +     .get_trip_type = exynos_get_trip_type,
>> +     .get_trip_temp = exynos_get_trip_temp,
>> +     .get_crit_temp = exynos_get_crit_temp,
>> +};
>> +
>> +/*
>> + * This function may be called from interrupt based temperature sensor
>> + * when threshold is changed.
>> + */
>> +void exynos_report_trigger(void)
>> +{
>> +     unsigned int i;
>> +     char data[10];
>> +     char *envp[] = { data, NULL };
>> +
>> +     if (!th_zone || !th_zone->therm_dev)
>> +             return;
>> +     if (th_zone->bind == false) {
>> +             for (i = 0; i < th_zone->cool_dev_size; i++) {
>> +                     if (!th_zone->cool_dev[i])
>> +                             continue;
>> +                     exynos_bind(th_zone->therm_dev,
>> +                                     th_zone->cool_dev[i]);
>> +             }
>> +     }
>> +
>> +     thermal_zone_device_update(th_zone->therm_dev);
>> +
>> +     mutex_lock(&th_zone->therm_dev->lock);
>> +     /* Find the level for which trip happened */
>> +     for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
>> +             if (th_zone->therm_dev->last_temperature <
>> +                     th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
>> +                     break;
>> +     }
>> +
>> +     if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
>> +             !th_zone->sensor_conf->trip_data.trigger_falling) {
>> +             if (i > 0)
>> +                     th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
>> +             else
>> +                     th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
>> +     }
>> +
>> +     snprintf(data, sizeof(data), "%u", i);
>> +     kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
>> +     mutex_unlock(&th_zone->therm_dev->lock);
>> +}
>> +
>> +/* Register with the in-kernel thermal management */
>> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>> +{
>> +     int ret;
>> +     struct cpumask mask_val;
>> +
>> +     if (!sensor_conf || !sensor_conf->read_temperature) {
>> +             pr_err("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
>> +     if (!th_zone)
>> +             return -ENOMEM;
>> +
>
> I d suggest switching to device resource managed allocation.
Ok.
>
>> +     th_zone->sensor_conf = sensor_conf;
>> +     cpumask_set_cpu(0, &mask_val);
>> +     th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>> +     if (IS_ERR(th_zone->cool_dev[0])) {
>> +             pr_err("Failed to register cpufreq cooling device\n");
>> +             ret = -EINVAL;
>> +             goto err_unregister;
>> +     }
>> +     th_zone->cool_dev_size++;
>> +
>> +     th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
>> +                     EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
>> +                     sensor_conf->trip_data.trigger_falling ?
>> +                     0 : IDLE_INTERVAL);
>> +
>> +     if (IS_ERR(th_zone->therm_dev)) {
>> +             pr_err("Failed to register thermal zone device\n");
>> +             ret = PTR_ERR(th_zone->therm_dev);
>> +             goto err_unregister;
>> +     }
>> +     th_zone->mode = THERMAL_DEVICE_ENABLED;
>> +
>> +     pr_info("Exynos: Kernel Thermal management registered\n");
>> +
>> +     return 0;
>> +
>> +err_unregister:
>> +     exynos_unregister_thermal();
>> +     return ret;
>> +}
>> +
>> +/* Un-Register with the in-kernel thermal management */
>> +void exynos_unregister_thermal(void)
>> +{
>> +     int i;
>> +
>> +     if (!th_zone)
>> +             return;
>> +
>> +     if (th_zone->therm_dev)
>> +             thermal_zone_device_unregister(th_zone->therm_dev);
>> +
>> +     for (i = 0; i < th_zone->cool_dev_size; i++) {
>> +             if (th_zone->cool_dev[i])
>> +                     cpufreq_cooling_unregister(th_zone->cool_dev[i]);
>> +     }
>> +
>> +     kfree(th_zone);
>> +     pr_info("Exynos: Kernel Thermal management unregistered\n");
>> +}
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
>> new file mode 100644
>> index 0000000..da2add0
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>> @@ -0,0 +1,83 @@
>> +/*
>> + * exynos_thermal_common.h - Samsung EXYNOS common header file
>> + *
>> + *  Copyright (C) 2013 Samsung Electronics
>> + *  Amit Daniel Kachhap <amit.daniel@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
>> + *
>> + */
>> +
>> +#ifndef _LINUX_EXYNOS_THERMAL_COMMON_H
>> +#define _LINUX_EXYNOS_THERMAL_COMMON_H
>> +
>
> How about simply _EXYNOS_THERMAL_COMMON_H?
Ok
>
>> +/* In-kernel thermal framework related macros & definations */
>> +#define SENSOR_NAME_LEN      16
>> +#define MAX_TRIP_COUNT       8
>> +#define MAX_COOLING_DEVICE 4
>> +#define MAX_THRESHOLD_LEVS 4
>> +
>> +#define ACTIVE_INTERVAL 500
>> +#define IDLE_INTERVAL 10000
>> +#define MCELSIUS     1000
>> +
>> +/* CPU Zone information */
>> +#define PANIC_ZONE      4
>> +#define WARN_ZONE       3
>> +#define MONITOR_ZONE    2
>> +#define SAFE_ZONE       1
>> +
>> +#define GET_ZONE(trip) (trip + 2)
>> +#define GET_TRIP(zone) (zone - 2)
>> +
>> +#define EXYNOS_ZONE_COUNT    3
>> +
>> +struct       thermal_trip_point_conf {
>> +     int trip_val[MAX_TRIP_COUNT];
>> +     int trip_count;
>> +     u8 trigger_falling;
>> +};
>> +
>> +struct       thermal_cooling_conf {
>> +     struct freq_clip_table freq_data[MAX_TRIP_COUNT];
>
> You need to have the include for the above type
Above structure defination is added in the same file in the later
patches. Since this patch is intermediate and compiled so didn't do.

Regards,
Amit Daniel
>
>> +     int freq_clip_count;
>> +};
>> +
>> +struct thermal_sensor_conf {
>> +     char name[SENSOR_NAME_LEN];
>> +     int (*read_temperature)(void *data);
>> +     int (*write_emul_temp)(void *drv_data, unsigned long temp);
>> +     struct thermal_trip_point_conf trip_data;
>> +     struct thermal_cooling_conf cooling_daa;
>> +     void *private_data;
>> +};
>> +
>> +/*Functions used exynos based thermal sensor driver*/
>> +#ifdef CONFIG_EXYNOS_THERMAL_CORE
>> +void exynos_unregister_thermal(void);
>> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
>> +void exynos_report_trigger(void);
>> +#else
>> +static inline void
>> +exynos_unregister_thermal(void) { return; }
>> +
>> +static inline int
>> +exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
>> +
>> +static inline void
>> +exynos_report_trigger(void) { return; }
>> +
>> +#endif /* CONFIG_EXYNOS_COMMON */
>> +#endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
index 2d3d9dc..7857e20 100644
--- a/drivers/thermal/samsung/Kconfig
+++ b/drivers/thermal/samsung/Kconfig
@@ -1,9 +1,17 @@ 
 config EXYNOS_THERMAL
-	tristate "Temperature sensor on Samsung EXYNOS"
+	tristate "Exynos thermal management unit driver"
 	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
-	depends on CPU_THERMAL
 	help
-	  If you say yes here you get support for TMU (Thermal Management
-	  Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
-	  the exynos thermal driver with the core thermal layer and cpu
-	  cooling API's.
+	  If you say yes here you get support for the exynos thermal driver
+	  for exynos4 and exynos5 soc. This driver initialises the TMU, reports
+	  temperature and handles cooling action if defined. This driver uses
+	  core thermal API's.
+
+config EXYNOS_THERMAL_CORE
+	bool "Core thermal framework support for EXYNOS SOC's"
+	depends on EXYNOS_THERMAL
+	help
+	  If you say yes here you get support for EXYNOS TMU
+	  (Thermal Management Unit) common registration/unregistration
+	  functions to the core thermal layer and also to use the generic
+	  cpu cooling API's.
diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
index 1fe6d93..6227d4f 100644
--- a/drivers/thermal/samsung/Makefile
+++ b/drivers/thermal/samsung/Makefile
@@ -1,4 +1,6 @@ 
 #
 # Samsung thermal specific Makefile
 #
-obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
+obj-$(CONFIG_EXYNOS_THERMAL)			+= exynos_soc_thermal.o
+exynos_soc_thermal-y				:= exynos_thermal.o
+exynos_soc_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o
diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
index d20ce9e..4c85945 100644
--- a/drivers/thermal/samsung/exynos_thermal.c
+++ b/drivers/thermal/samsung/exynos_thermal.c
@@ -21,23 +21,19 @@ 
  *
  */
 
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/workqueue.h>
-#include <linux/sysfs.h>
-#include <linux/kobject.h>
 #include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/platform_data/exynos_thermal.h>
-#include <linux/thermal.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/exynos_thermal.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include "exynos_thermal_common.h"
 
 /* Exynos generic registers */
 #define EXYNOS_TMU_REG_TRIMINFO		0x0
@@ -88,16 +84,6 @@ 
 #define EFUSE_MIN_VALUE 40
 #define EFUSE_MAX_VALUE 100
 
-/* In-kernel thermal framework related macros & definations */
-#define SENSOR_NAME_LEN	16
-#define MAX_TRIP_COUNT	8
-#define MAX_COOLING_DEVICE 4
-#define MAX_THRESHOLD_LEVS 4
-
-#define ACTIVE_INTERVAL 500
-#define IDLE_INTERVAL 10000
-#define MCELSIUS	1000
-
 #ifdef CONFIG_THERMAL_EMULATION
 #define EXYNOS_EMUL_TIME	0x57F0
 #define EXYNOS_EMUL_TIME_SHIFT	16
@@ -106,17 +92,6 @@ 
 #define EXYNOS_EMUL_ENABLE	0x1
 #endif /* CONFIG_THERMAL_EMULATION */
 
-/* CPU Zone information */
-#define PANIC_ZONE      4
-#define WARN_ZONE       3
-#define MONITOR_ZONE    2
-#define SAFE_ZONE       1
-
-#define GET_ZONE(trip) (trip + 2)
-#define GET_TRIP(zone) (zone - 2)
-
-#define EXYNOS_ZONE_COUNT	3
-
 struct exynos_tmu_data {
 	struct exynos_tmu_platform_data *pdata;
 	struct resource *mem;
@@ -129,384 +104,6 @@  struct exynos_tmu_data {
 	u8 temp_error1, temp_error2;
 };
 
-struct	thermal_trip_point_conf {
-	int trip_val[MAX_TRIP_COUNT];
-	int trip_count;
-	u8 trigger_falling;
-};
-
-struct	thermal_cooling_conf {
-	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
-	int freq_clip_count;
-};
-
-struct thermal_sensor_conf {
-	char name[SENSOR_NAME_LEN];
-	int (*read_temperature)(void *data);
-	int (*write_emul_temp)(void *drv_data, unsigned long temp);
-	struct thermal_trip_point_conf trip_data;
-	struct thermal_cooling_conf cooling_data;
-	void *private_data;
-};
-
-struct exynos_thermal_zone {
-	enum thermal_device_mode mode;
-	struct thermal_zone_device *therm_dev;
-	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
-	unsigned int cool_dev_size;
-	struct platform_device *exynos4_dev;
-	struct thermal_sensor_conf *sensor_conf;
-	bool bind;
-};
-
-static struct exynos_thermal_zone *th_zone;
-static void exynos_unregister_thermal(void);
-static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
-
-/* Get mode callback functions for thermal zone */
-static int exynos_get_mode(struct thermal_zone_device *thermal,
-			enum thermal_device_mode *mode)
-{
-	if (th_zone)
-		*mode = th_zone->mode;
-	return 0;
-}
-
-/* Set mode callback functions for thermal zone */
-static int exynos_set_mode(struct thermal_zone_device *thermal,
-			enum thermal_device_mode mode)
-{
-	if (!th_zone->therm_dev) {
-		pr_notice("thermal zone not registered\n");
-		return 0;
-	}
-
-	mutex_lock(&th_zone->therm_dev->lock);
-
-	if (mode == THERMAL_DEVICE_ENABLED &&
-		!th_zone->sensor_conf->trip_data.trigger_falling)
-		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
-	else
-		th_zone->therm_dev->polling_delay = 0;
-
-	mutex_unlock(&th_zone->therm_dev->lock);
-
-	th_zone->mode = mode;
-	thermal_zone_device_update(th_zone->therm_dev);
-	pr_info("thermal polling set for duration=%d msec\n",
-				th_zone->therm_dev->polling_delay);
-	return 0;
-}
-
-
-/* Get trip type callback functions for thermal zone */
-static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
-				 enum thermal_trip_type *type)
-{
-	switch (GET_ZONE(trip)) {
-	case MONITOR_ZONE:
-	case WARN_ZONE:
-		*type = THERMAL_TRIP_ACTIVE;
-		break;
-	case PANIC_ZONE:
-		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* Get trip temperature callback functions for thermal zone */
-static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
-				unsigned long *temp)
-{
-	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
-		return -EINVAL;
-
-	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
-	/* convert the temperature into millicelsius */
-	*temp = *temp * MCELSIUS;
-
-	return 0;
-}
-
-/* Get critical temperature callback functions for thermal zone */
-static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
-				unsigned long *temp)
-{
-	int ret;
-	/* Panic zone */
-	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
-	return ret;
-}
-
-/* Bind callback functions for thermal zone */
-static int exynos_bind(struct thermal_zone_device *thermal,
-			struct thermal_cooling_device *cdev)
-{
-	int ret = 0, i, tab_size, level;
-	struct freq_clip_table *tab_ptr, *clip_data;
-	struct thermal_sensor_conf *data = th_zone->sensor_conf;
-
-	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
-	tab_size = data->cooling_data.freq_clip_count;
-
-	if (tab_ptr == NULL || tab_size == 0)
-		return -EINVAL;
-
-	/* find the cooling device registered*/
-	for (i = 0; i < th_zone->cool_dev_size; i++)
-		if (cdev == th_zone->cool_dev[i])
-			break;
-
-	/* No matching cooling device */
-	if (i == th_zone->cool_dev_size)
-		return 0;
-
-	/* Bind the thermal zone to the cpufreq cooling device */
-	for (i = 0; i < tab_size; i++) {
-		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
-		level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
-		if (level == THERMAL_CSTATE_INVALID)
-			return 0;
-		switch (GET_ZONE(i)) {
-		case MONITOR_ZONE:
-		case WARN_ZONE:
-			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
-								level, 0)) {
-				pr_err("error binding cdev inst %d\n", i);
-				ret = -EINVAL;
-			}
-			th_zone->bind = true;
-			break;
-		default:
-			ret = -EINVAL;
-		}
-	}
-
-	return ret;
-}
-
-/* Unbind callback functions for thermal zone */
-static int exynos_unbind(struct thermal_zone_device *thermal,
-			struct thermal_cooling_device *cdev)
-{
-	int ret = 0, i, tab_size;
-	struct thermal_sensor_conf *data = th_zone->sensor_conf;
-
-	if (th_zone->bind == false)
-		return 0;
-
-	tab_size = data->cooling_data.freq_clip_count;
-
-	if (tab_size == 0)
-		return -EINVAL;
-
-	/* find the cooling device registered*/
-	for (i = 0; i < th_zone->cool_dev_size; i++)
-		if (cdev == th_zone->cool_dev[i])
-			break;
-
-	/* No matching cooling device */
-	if (i == th_zone->cool_dev_size)
-		return 0;
-
-	/* Bind the thermal zone to the cpufreq cooling device */
-	for (i = 0; i < tab_size; i++) {
-		switch (GET_ZONE(i)) {
-		case MONITOR_ZONE:
-		case WARN_ZONE:
-			if (thermal_zone_unbind_cooling_device(thermal, i,
-								cdev)) {
-				pr_err("error unbinding cdev inst=%d\n", i);
-				ret = -EINVAL;
-			}
-			th_zone->bind = false;
-			break;
-		default:
-			ret = -EINVAL;
-		}
-	}
-	return ret;
-}
-
-/* Get temperature callback functions for thermal zone */
-static int exynos_get_temp(struct thermal_zone_device *thermal,
-			unsigned long *temp)
-{
-	void *data;
-
-	if (!th_zone->sensor_conf) {
-		pr_info("Temperature sensor not initialised\n");
-		return -EINVAL;
-	}
-	data = th_zone->sensor_conf->private_data;
-	*temp = th_zone->sensor_conf->read_temperature(data);
-	/* convert the temperature into millicelsius */
-	*temp = *temp * MCELSIUS;
-	return 0;
-}
-
-/* Get temperature callback functions for thermal zone */
-static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
-						unsigned long temp)
-{
-	void *data;
-	int ret = -EINVAL;
-
-	if (!th_zone->sensor_conf) {
-		pr_info("Temperature sensor not initialised\n");
-		return -EINVAL;
-	}
-	data = th_zone->sensor_conf->private_data;
-	if (th_zone->sensor_conf->write_emul_temp)
-		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
-	return ret;
-}
-
-/* Get the temperature trend */
-static int exynos_get_trend(struct thermal_zone_device *thermal,
-			int trip, enum thermal_trend *trend)
-{
-	int ret;
-	unsigned long trip_temp;
-
-	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
-	if (ret < 0)
-		return ret;
-
-	if (thermal->temperature >= trip_temp)
-		*trend = THERMAL_TREND_RAISE_FULL;
-	else
-		*trend = THERMAL_TREND_DROP_FULL;
-
-	return 0;
-}
-/* Operation callback functions for thermal zone */
-static struct thermal_zone_device_ops const exynos_dev_ops = {
-	.bind = exynos_bind,
-	.unbind = exynos_unbind,
-	.get_temp = exynos_get_temp,
-	.set_emul_temp = exynos_set_emul_temp,
-	.get_trend = exynos_get_trend,
-	.get_mode = exynos_get_mode,
-	.set_mode = exynos_set_mode,
-	.get_trip_type = exynos_get_trip_type,
-	.get_trip_temp = exynos_get_trip_temp,
-	.get_crit_temp = exynos_get_crit_temp,
-};
-
-/*
- * This function may be called from interrupt based temperature sensor
- * when threshold is changed.
- */
-static void exynos_report_trigger(void)
-{
-	unsigned int i;
-	char data[10];
-	char *envp[] = { data, NULL };
-
-	if (!th_zone || !th_zone->therm_dev)
-		return;
-	if (th_zone->bind == false) {
-		for (i = 0; i < th_zone->cool_dev_size; i++) {
-			if (!th_zone->cool_dev[i])
-				continue;
-			exynos_bind(th_zone->therm_dev,
-					th_zone->cool_dev[i]);
-		}
-	}
-
-	thermal_zone_device_update(th_zone->therm_dev);
-
-	mutex_lock(&th_zone->therm_dev->lock);
-	/* Find the level for which trip happened */
-	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
-		if (th_zone->therm_dev->last_temperature <
-			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
-			break;
-	}
-
-	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
-		!th_zone->sensor_conf->trip_data.trigger_falling) {
-		if (i > 0)
-			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
-		else
-			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
-	}
-
-	snprintf(data, sizeof(data), "%u", i);
-	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
-	mutex_unlock(&th_zone->therm_dev->lock);
-}
-
-/* Register with the in-kernel thermal management */
-static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
-{
-	int ret;
-	struct cpumask mask_val;
-
-	if (!sensor_conf || !sensor_conf->read_temperature) {
-		pr_err("Temperature sensor not initialised\n");
-		return -EINVAL;
-	}
-
-	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
-	if (!th_zone)
-		return -ENOMEM;
-
-	th_zone->sensor_conf = sensor_conf;
-	cpumask_set_cpu(0, &mask_val);
-	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
-	if (IS_ERR(th_zone->cool_dev[0])) {
-		pr_err("Failed to register cpufreq cooling device\n");
-		ret = -EINVAL;
-		goto err_unregister;
-	}
-	th_zone->cool_dev_size++;
-
-	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
-			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
-			sensor_conf->trip_data.trigger_falling ?
-			0 : IDLE_INTERVAL);
-
-	if (IS_ERR(th_zone->therm_dev)) {
-		pr_err("Failed to register thermal zone device\n");
-		ret = PTR_ERR(th_zone->therm_dev);
-		goto err_unregister;
-	}
-	th_zone->mode = THERMAL_DEVICE_ENABLED;
-
-	pr_info("Exynos: Kernel Thermal management registered\n");
-
-	return 0;
-
-err_unregister:
-	exynos_unregister_thermal();
-	return ret;
-}
-
-/* Un-Register with the in-kernel thermal management */
-static void exynos_unregister_thermal(void)
-{
-	int i;
-
-	if (!th_zone)
-		return;
-
-	if (th_zone->therm_dev)
-		thermal_zone_device_unregister(th_zone->therm_dev);
-
-	for (i = 0; i < th_zone->cool_dev_size; i++) {
-		if (th_zone->cool_dev[i])
-			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
-	}
-
-	kfree(th_zone);
-	pr_info("Exynos: Kernel Thermal management unregistered\n");
-}
-
 /*
  * TMU treats temperature as a mapped temperature code.
  * The temperature is converted differently depending on the calibration type.
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
new file mode 100644
index 0000000..9a57606
--- /dev/null
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -0,0 +1,389 @@ 
+/*
+ * exynos_thermal_common.c - Samsung EXYNOS common thermal file
+ *
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Amit Daniel Kachhap <amit.daniel@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/exynos_thermal.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include "exynos_thermal_common.h"
+
+struct exynos_thermal_zone {
+	enum thermal_device_mode mode;
+	struct thermal_zone_device *therm_dev;
+	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
+	unsigned int cool_dev_size;
+	struct platform_device *exynos4_dev;
+	struct thermal_sensor_conf *sensor_conf;
+	bool bind;
+};
+
+static struct exynos_thermal_zone *th_zone;
+
+/* Get mode callback functions for thermal zone */
+static int exynos_get_mode(struct thermal_zone_device *thermal,
+			enum thermal_device_mode *mode)
+{
+	if (th_zone)
+		*mode = th_zone->mode;
+	return 0;
+}
+
+/* Set mode callback functions for thermal zone */
+static int exynos_set_mode(struct thermal_zone_device *thermal,
+			enum thermal_device_mode mode)
+{
+	if (!th_zone->therm_dev) {
+		pr_notice("thermal zone not registered\n");
+		return 0;
+	}
+
+	mutex_lock(&th_zone->therm_dev->lock);
+
+	if (mode == THERMAL_DEVICE_ENABLED &&
+		!th_zone->sensor_conf->trip_data.trigger_falling)
+		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
+	else
+		th_zone->therm_dev->polling_delay = 0;
+
+	mutex_unlock(&th_zone->therm_dev->lock);
+
+	th_zone->mode = mode;
+	thermal_zone_device_update(th_zone->therm_dev);
+	pr_info("thermal polling set for duration=%d msec\n",
+				th_zone->therm_dev->polling_delay);
+	return 0;
+}
+
+
+/* Get trip type callback functions for thermal zone */
+static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
+				 enum thermal_trip_type *type)
+{
+	switch (GET_ZONE(trip)) {
+	case MONITOR_ZONE:
+	case WARN_ZONE:
+		*type = THERMAL_TRIP_ACTIVE;
+		break;
+	case PANIC_ZONE:
+		*type = THERMAL_TRIP_CRITICAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Get trip temperature callback functions for thermal zone */
+static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+				unsigned long *temp)
+{
+	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
+		return -EINVAL;
+
+	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
+	/* convert the temperature into millicelsius */
+	*temp = *temp * MCELSIUS;
+
+	return 0;
+}
+
+/* Get critical temperature callback functions for thermal zone */
+static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
+				unsigned long *temp)
+{
+	int ret;
+	/* Panic zone */
+	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
+	return ret;
+}
+
+/* Bind callback functions for thermal zone */
+static int exynos_bind(struct thermal_zone_device *thermal,
+			struct thermal_cooling_device *cdev)
+{
+	int ret = 0, i, tab_size, level;
+	struct freq_clip_table *tab_ptr, *clip_data;
+	struct thermal_sensor_conf *data = th_zone->sensor_conf;
+
+	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
+	tab_size = data->cooling_data.freq_clip_count;
+
+	if (tab_ptr == NULL || tab_size == 0)
+		return -EINVAL;
+
+	/* find the cooling device registered*/
+	for (i = 0; i < th_zone->cool_dev_size; i++)
+		if (cdev == th_zone->cool_dev[i])
+			break;
+
+	/* No matching cooling device */
+	if (i == th_zone->cool_dev_size)
+		return 0;
+
+	/* Bind the thermal zone to the cpufreq cooling device */
+	for (i = 0; i < tab_size; i++) {
+		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
+		level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
+		if (level == THERMAL_CSTATE_INVALID)
+			return 0;
+		switch (GET_ZONE(i)) {
+		case MONITOR_ZONE:
+		case WARN_ZONE:
+			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
+								level, 0)) {
+				pr_err("error binding cdev inst %d\n", i);
+				ret = -EINVAL;
+			}
+			th_zone->bind = true;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	}
+
+	return ret;
+}
+
+/* Unbind callback functions for thermal zone */
+static int exynos_unbind(struct thermal_zone_device *thermal,
+			struct thermal_cooling_device *cdev)
+{
+	int ret = 0, i, tab_size;
+	struct thermal_sensor_conf *data = th_zone->sensor_conf;
+
+	if (th_zone->bind == false)
+		return 0;
+
+	tab_size = data->cooling_data.freq_clip_count;
+
+	if (tab_size == 0)
+		return -EINVAL;
+
+	/* find the cooling device registered*/
+	for (i = 0; i < th_zone->cool_dev_size; i++)
+		if (cdev == th_zone->cool_dev[i])
+			break;
+
+	/* No matching cooling device */
+	if (i == th_zone->cool_dev_size)
+		return 0;
+
+	/* Bind the thermal zone to the cpufreq cooling device */
+	for (i = 0; i < tab_size; i++) {
+		switch (GET_ZONE(i)) {
+		case MONITOR_ZONE:
+		case WARN_ZONE:
+			if (thermal_zone_unbind_cooling_device(thermal, i,
+								cdev)) {
+				pr_err("error unbinding cdev inst=%d\n", i);
+				ret = -EINVAL;
+			}
+			th_zone->bind = false;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	}
+	return ret;
+}
+
+/* Get temperature callback functions for thermal zone */
+static int exynos_get_temp(struct thermal_zone_device *thermal,
+			unsigned long *temp)
+{
+	void *data;
+
+	if (!th_zone->sensor_conf) {
+		pr_info("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+	data = th_zone->sensor_conf->private_data;
+	*temp = th_zone->sensor_conf->read_temperature(data);
+	/* convert the temperature into millicelsius */
+	*temp = *temp * MCELSIUS;
+	return 0;
+}
+
+/* Get temperature callback functions for thermal zone */
+static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
+						unsigned long temp)
+{
+	void *data;
+	int ret = -EINVAL;
+
+	if (!th_zone->sensor_conf) {
+		pr_info("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+	data = th_zone->sensor_conf->private_data;
+	if (th_zone->sensor_conf->write_emul_temp)
+		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
+	return ret;
+}
+
+/* Get the temperature trend */
+static int exynos_get_trend(struct thermal_zone_device *thermal,
+			int trip, enum thermal_trend *trend)
+{
+	int ret;
+	unsigned long trip_temp;
+
+	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
+	if (ret < 0)
+		return ret;
+
+	if (thermal->temperature >= trip_temp)
+		*trend = THERMAL_TREND_RAISE_FULL;
+	else
+		*trend = THERMAL_TREND_DROP_FULL;
+
+	return 0;
+}
+/* Operation callback functions for thermal zone */
+static struct thermal_zone_device_ops const exynos_dev_ops = {
+	.bind = exynos_bind,
+	.unbind = exynos_unbind,
+	.get_temp = exynos_get_temp,
+	.set_emul_temp = exynos_set_emul_temp,
+	.get_trend = exynos_get_trend,
+	.get_mode = exynos_get_mode,
+	.set_mode = exynos_set_mode,
+	.get_trip_type = exynos_get_trip_type,
+	.get_trip_temp = exynos_get_trip_temp,
+	.get_crit_temp = exynos_get_crit_temp,
+};
+
+/*
+ * This function may be called from interrupt based temperature sensor
+ * when threshold is changed.
+ */
+void exynos_report_trigger(void)
+{
+	unsigned int i;
+	char data[10];
+	char *envp[] = { data, NULL };
+
+	if (!th_zone || !th_zone->therm_dev)
+		return;
+	if (th_zone->bind == false) {
+		for (i = 0; i < th_zone->cool_dev_size; i++) {
+			if (!th_zone->cool_dev[i])
+				continue;
+			exynos_bind(th_zone->therm_dev,
+					th_zone->cool_dev[i]);
+		}
+	}
+
+	thermal_zone_device_update(th_zone->therm_dev);
+
+	mutex_lock(&th_zone->therm_dev->lock);
+	/* Find the level for which trip happened */
+	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
+		if (th_zone->therm_dev->last_temperature <
+			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
+			break;
+	}
+
+	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
+		!th_zone->sensor_conf->trip_data.trigger_falling) {
+		if (i > 0)
+			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
+		else
+			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
+	}
+
+	snprintf(data, sizeof(data), "%u", i);
+	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
+	mutex_unlock(&th_zone->therm_dev->lock);
+}
+
+/* Register with the in-kernel thermal management */
+int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
+{
+	int ret;
+	struct cpumask mask_val;
+
+	if (!sensor_conf || !sensor_conf->read_temperature) {
+		pr_err("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+
+	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
+	if (!th_zone)
+		return -ENOMEM;
+
+	th_zone->sensor_conf = sensor_conf;
+	cpumask_set_cpu(0, &mask_val);
+	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
+	if (IS_ERR(th_zone->cool_dev[0])) {
+		pr_err("Failed to register cpufreq cooling device\n");
+		ret = -EINVAL;
+		goto err_unregister;
+	}
+	th_zone->cool_dev_size++;
+
+	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
+			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
+			sensor_conf->trip_data.trigger_falling ?
+			0 : IDLE_INTERVAL);
+
+	if (IS_ERR(th_zone->therm_dev)) {
+		pr_err("Failed to register thermal zone device\n");
+		ret = PTR_ERR(th_zone->therm_dev);
+		goto err_unregister;
+	}
+	th_zone->mode = THERMAL_DEVICE_ENABLED;
+
+	pr_info("Exynos: Kernel Thermal management registered\n");
+
+	return 0;
+
+err_unregister:
+	exynos_unregister_thermal();
+	return ret;
+}
+
+/* Un-Register with the in-kernel thermal management */
+void exynos_unregister_thermal(void)
+{
+	int i;
+
+	if (!th_zone)
+		return;
+
+	if (th_zone->therm_dev)
+		thermal_zone_device_unregister(th_zone->therm_dev);
+
+	for (i = 0; i < th_zone->cool_dev_size; i++) {
+		if (th_zone->cool_dev[i])
+			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
+	}
+
+	kfree(th_zone);
+	pr_info("Exynos: Kernel Thermal management unregistered\n");
+}
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
new file mode 100644
index 0000000..da2add0
--- /dev/null
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -0,0 +1,83 @@ 
+/*
+ * exynos_thermal_common.h - Samsung EXYNOS common header file
+ *
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Amit Daniel Kachhap <amit.daniel@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _LINUX_EXYNOS_THERMAL_COMMON_H
+#define _LINUX_EXYNOS_THERMAL_COMMON_H
+
+/* In-kernel thermal framework related macros & definations */
+#define SENSOR_NAME_LEN	16
+#define MAX_TRIP_COUNT	8
+#define MAX_COOLING_DEVICE 4
+#define MAX_THRESHOLD_LEVS 4
+
+#define ACTIVE_INTERVAL 500
+#define IDLE_INTERVAL 10000
+#define MCELSIUS	1000
+
+/* CPU Zone information */
+#define PANIC_ZONE      4
+#define WARN_ZONE       3
+#define MONITOR_ZONE    2
+#define SAFE_ZONE       1
+
+#define GET_ZONE(trip) (trip + 2)
+#define GET_TRIP(zone) (zone - 2)
+
+#define EXYNOS_ZONE_COUNT	3
+
+struct	thermal_trip_point_conf {
+	int trip_val[MAX_TRIP_COUNT];
+	int trip_count;
+	u8 trigger_falling;
+};
+
+struct	thermal_cooling_conf {
+	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
+	int freq_clip_count;
+};
+
+struct thermal_sensor_conf {
+	char name[SENSOR_NAME_LEN];
+	int (*read_temperature)(void *data);
+	int (*write_emul_temp)(void *drv_data, unsigned long temp);
+	struct thermal_trip_point_conf trip_data;
+	struct thermal_cooling_conf cooling_data;
+	void *private_data;
+};
+
+/*Functions used exynos based thermal sensor driver*/
+#ifdef CONFIG_EXYNOS_THERMAL_CORE
+void exynos_unregister_thermal(void);
+int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
+void exynos_report_trigger(void);
+#else
+static inline void
+exynos_unregister_thermal(void) { return; }
+
+static inline int
+exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
+
+static inline void
+exynos_report_trigger(void) { return; }
+
+#endif /* CONFIG_EXYNOS_COMMON */
+#endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */