[RESEND,V3,01/21] thermal: exynos: Moving exynos thermal files into samsung directory
diff mbox

Message ID 1367932062-3974-1-git-send-email-amit.daniel@samsung.com
State Changes Requested
Delegated to: Eduardo Valentin
Headers show

Commit Message

Amit Kachhap May 7, 2013, 1:07 p.m. UTC
This movement of files is done for easy maintenance and adding more
new sensor's support for exynos platform easily . This will also help in
bifurcating exynos common, sensor driver and sensor data related parts.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/Kconfig                        |   13 +++++--------
 drivers/thermal/Makefile                       |    2 +-
 drivers/thermal/samsung/Kconfig                |    9 +++++++++
 drivers/thermal/samsung/Makefile               |    4 ++++
 drivers/thermal/{ => samsung}/exynos_thermal.c |    0
 5 files changed, 19 insertions(+), 9 deletions(-)
 create mode 100644 drivers/thermal/samsung/Kconfig
 create mode 100644 drivers/thermal/samsung/Makefile
 rename drivers/thermal/{ => samsung}/exynos_thermal.c (100%)

diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
similarity index 100%
rename from drivers/thermal/exynos_thermal.c
rename to drivers/thermal/samsung/exynos_thermal.c

Comments

Eduardo Valentin May 8, 2013, 3:49 p.m. UTC | #1
On 07-05-2013 09:07, Amit Daniel Kachhap wrote:
> This movement of files is done for easy maintenance and adding more
> new sensor's support for exynos platform easily . This will also help in
> bifurcating exynos common, sensor driver and sensor data related parts.
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
>  drivers/thermal/Kconfig                        |   13 +++++--------
>  drivers/thermal/Makefile                       |    2 +-
>  drivers/thermal/samsung/Kconfig                |    9 +++++++++
>  drivers/thermal/samsung/Makefile               |    4 ++++
>  drivers/thermal/{ => samsung}/exynos_thermal.c |    0
>  5 files changed, 19 insertions(+), 9 deletions(-)
>  create mode 100644 drivers/thermal/samsung/Kconfig
>  create mode 100644 drivers/thermal/samsung/Makefile
>  rename drivers/thermal/{ => samsung}/exynos_thermal.c (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 5e3c025..081ddc5 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -114,14 +114,6 @@ config KIRKWOOD_THERMAL
>  	  Support for the Kirkwood thermal sensor driver into the Linux thermal
>  	  framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
>  
> -config EXYNOS_THERMAL
> -	tristate "Temperature sensor on Samsung EXYNOS"
> -	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> -	depends on CPU_THERMAL
> -	help
> -	  If you say yes here you get support for TMU (Thermal Management
> -	  Unit) on SAMSUNG EXYNOS series of SoC.
> -
>  config DOVE_THERMAL
>  	tristate "Temperature sensor on Marvell Dove SoCs"
>  	depends on ARCH_DOVE
> @@ -169,4 +161,9 @@ config INTEL_POWERCLAMP
>  	  enforce idle time which results in more package C-state residency. The
>  	  user interface is exposed via generic thermal framework.
>  
> +menu "Samsung thermal drivers"
> +depends on PLAT_SAMSUNG
> +source "drivers/thermal/samsung/Kconfig"
> +endmenu
> +
>  endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index c054d41..b3063a9 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -17,7 +17,7 @@ thermal_sys-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
>  obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
>  obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
>  obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
> -obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
> +obj-y				+= samsung/
>  obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
>  obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
>  obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> new file mode 100644
> index 0000000..2d3d9dc
> --- /dev/null
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -0,0 +1,9 @@
> +config EXYNOS_THERMAL
> +	tristate "Temperature sensor on Samsung EXYNOS"
> +	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)

Do you really want to keep a list of Kconfig dependency here?

I was suggested to have a config entry (like ARCH_HAS_BANDBAP) and then
in the driver use:
	depends on ARCH_HAS_BANDGAP

And the arch/ code would just selects ARCH_HAS_BANDGAP (like
ARCH_HAS_CPUFREQ).

> +	depends on CPU_THERMAL
> +	help
> +	  If you say yes here you get support for TMU (Thermal Management
> +	  Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
> +	  the exynos thermal driver with the core thermal layer and cpu
> +	  cooling API's.
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> new file mode 100644
> index 0000000..1fe6d93
> --- /dev/null
> +++ b/drivers/thermal/samsung/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# Samsung thermal specific Makefile
> +#
> +obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
> similarity index 100%
> rename from drivers/thermal/exynos_thermal.c
> rename to drivers/thermal/samsung/exynos_thermal.c
>
Amit Kachhap May 9, 2013, 2:15 a.m. UTC | #2
Hi Eduardo,

On Wed, May 8, 2013 at 9:19 PM, Eduardo Valentin
<eduardo.valentin@ti.com> wrote:
> On 07-05-2013 09:07, Amit Daniel Kachhap wrote:
>> This movement of files is done for easy maintenance and adding more
>> new sensor's support for exynos platform easily . This will also help in
>> bifurcating exynos common, sensor driver and sensor data related parts.
>>
>> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>> ---
>>  drivers/thermal/Kconfig                        |   13 +++++--------
>>  drivers/thermal/Makefile                       |    2 +-
>>  drivers/thermal/samsung/Kconfig                |    9 +++++++++
>>  drivers/thermal/samsung/Makefile               |    4 ++++
>>  drivers/thermal/{ => samsung}/exynos_thermal.c |    0
>>  5 files changed, 19 insertions(+), 9 deletions(-)
>>  create mode 100644 drivers/thermal/samsung/Kconfig
>>  create mode 100644 drivers/thermal/samsung/Makefile
>>  rename drivers/thermal/{ => samsung}/exynos_thermal.c (100%)
>>
>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>> index 5e3c025..081ddc5 100644
>> --- a/drivers/thermal/Kconfig
>> +++ b/drivers/thermal/Kconfig
>> @@ -114,14 +114,6 @@ config KIRKWOOD_THERMAL
>>         Support for the Kirkwood thermal sensor driver into the Linux thermal
>>         framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
>>
>> -config EXYNOS_THERMAL
>> -     tristate "Temperature sensor on Samsung EXYNOS"
>> -     depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
>> -     depends on CPU_THERMAL
>> -     help
>> -       If you say yes here you get support for TMU (Thermal Management
>> -       Unit) on SAMSUNG EXYNOS series of SoC.
>> -
>>  config DOVE_THERMAL
>>       tristate "Temperature sensor on Marvell Dove SoCs"
>>       depends on ARCH_DOVE
>> @@ -169,4 +161,9 @@ config INTEL_POWERCLAMP
>>         enforce idle time which results in more package C-state residency. The
>>         user interface is exposed via generic thermal framework.
>>
>> +menu "Samsung thermal drivers"
>> +depends on PLAT_SAMSUNG
>> +source "drivers/thermal/samsung/Kconfig"
>> +endmenu
>> +
>>  endif
>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
>> index c054d41..b3063a9 100644
>> --- a/drivers/thermal/Makefile
>> +++ b/drivers/thermal/Makefile
>> @@ -17,7 +17,7 @@ thermal_sys-$(CONFIG_CPU_THERMAL)   += cpu_cooling.o
>>  obj-$(CONFIG_SPEAR_THERMAL)  += spear_thermal.o
>>  obj-$(CONFIG_RCAR_THERMAL)   += rcar_thermal.o
>>  obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
>> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
>> +obj-y                                += samsung/
>>  obj-$(CONFIG_DOVE_THERMAL)   += dove_thermal.o
>>  obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
>>  obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
>> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
>> new file mode 100644
>> index 0000000..2d3d9dc
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/Kconfig
>> @@ -0,0 +1,9 @@
>> +config EXYNOS_THERMAL
>> +     tristate "Temperature sensor on Samsung EXYNOS"
>> +     depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
>
> Do you really want to keep a list of Kconfig dependency here?
>
> I was suggested to have a config entry (like ARCH_HAS_BANDBAP) and then
> in the driver use:
>         depends on ARCH_HAS_BANDGAP
>
> And the arch/ code would just selects ARCH_HAS_BANDGAP (like
> ARCH_HAS_CPUFREQ).

yes your suggestion looks good and then no need to change this Kconfig
for new SOC. Will incorporate this in new version.

Regards,
Amit Daniel
>
>> +     depends on CPU_THERMAL
>> +     help
>> +       If you say yes here you get support for TMU (Thermal Management
>> +       Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
>> +       the exynos thermal driver with the core thermal layer and cpu
>> +       cooling API's.
>> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
>> new file mode 100644
>> index 0000000..1fe6d93
>> --- /dev/null
>> +++ b/drivers/thermal/samsung/Makefile
>> @@ -0,0 +1,4 @@
>> +#
>> +# Samsung thermal specific Makefile
>> +#
>> +obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
>> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
>> similarity index 100%
>> rename from drivers/thermal/exynos_thermal.c
>> rename to drivers/thermal/samsung/exynos_thermal.c
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5e3c025..081ddc5 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -114,14 +114,6 @@  config KIRKWOOD_THERMAL
 	  Support for the Kirkwood thermal sensor driver into the Linux thermal
 	  framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
 
-config EXYNOS_THERMAL
-	tristate "Temperature sensor on Samsung EXYNOS"
-	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
-	depends on CPU_THERMAL
-	help
-	  If you say yes here you get support for TMU (Thermal Management
-	  Unit) on SAMSUNG EXYNOS series of SoC.
-
 config DOVE_THERMAL
 	tristate "Temperature sensor on Marvell Dove SoCs"
 	depends on ARCH_DOVE
@@ -169,4 +161,9 @@  config INTEL_POWERCLAMP
 	  enforce idle time which results in more package C-state residency. The
 	  user interface is exposed via generic thermal framework.
 
+menu "Samsung thermal drivers"
+depends on PLAT_SAMSUNG
+source "drivers/thermal/samsung/Kconfig"
+endmenu
+
 endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index c054d41..b3063a9 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -17,7 +17,7 @@  thermal_sys-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
 obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
-obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
+obj-y				+= samsung/
 obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
new file mode 100644
index 0000000..2d3d9dc
--- /dev/null
+++ b/drivers/thermal/samsung/Kconfig
@@ -0,0 +1,9 @@ 
+config EXYNOS_THERMAL
+	tristate "Temperature sensor on Samsung EXYNOS"
+	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
+	depends on CPU_THERMAL
+	help
+	  If you say yes here you get support for TMU (Thermal Management
+	  Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
+	  the exynos thermal driver with the core thermal layer and cpu
+	  cooling API's.
diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
new file mode 100644
index 0000000..1fe6d93
--- /dev/null
+++ b/drivers/thermal/samsung/Makefile
@@ -0,0 +1,4 @@ 
+#
+# Samsung thermal specific Makefile
+#
+obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o