[12/12] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board

Commit Message

Rajendra Nayak July 9, 2013, 7:32 a.m. UTC

From: R Sricharan <[e-mail]>

Add minimal device tree source needed for DRA7 based SoCs.
Also add a board dts file for the dra7-evm (based on dra752)
which contains 1.5G of memory with 1G interleaved and 512MB
non-interleaved.

Signed-off-by: R Sricharan <[e-mail]>
Signed-off-by: Rajendra Nayak <[e-mail]>
---
 arch/arm/boot/dts/Makefile     |    3 +-
 arch/arm/boot/dts/dra7-evm.dts |   20 ++
 arch/arm/boot/dts/dra7.dtsi    |  488 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 510 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/dra7-evm.dts
 create mode 100644 arch/arm/boot/dts/dra7.dtsi

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..e2f8566 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -173,7 +173,8 @@  dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-bone.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
-	am43x-epos-evm.dtb
+	am43x-epos-evm.dtb \
+	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
new file mode 100644
index 0000000..cb0703c
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -0,0 +1,20 @@ 
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "dra7.dtsi"
+
+/ {
+	model = "TI DRA7";
+	compatible = "ti,dra7-evm", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x60000000>; /* 1536 MB */
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
new file mode 100644
index 0000000..8a0c08e
--- /dev/null
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -0,0 +1,488 @@ 
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			timer {
+				compatible = "arm,armv7-timer";
+				/*
+				 * PPI secure/nonsecure IRQ,
+				 * active low level-sensitive
+				 */
+				interrupts = <1 13 0x308>,
+					     <1 14 0x308>;
+				clock-frequency = <6144000>;
+			};
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			timer {
+				compatible = "arm,armv7-timer";
+				/*
+				 * PPI secure/nonsecure IRQ,
+				 * active low level-sensitive
+				 */
+				interrupts = <1 13 0x308>,
+					     <1 14 0x308>;
+				clock-frequency = <6144000>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48211000 0x1000>,
+		      <0x48212000 0x1000>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		dra7_pmx_core: pinmux@4a003400 {
+			compatible = "pinctrl-single";
+			reg = <0x4a003400 0x0464>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x3fffffff>;
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <0 12 0x4>,
+				     <0 13 0x4>,
+				     <0 14 0x4>,
+				     <0 15 0x4>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <0 29 0x4>;
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <0 35 0x4>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <0 121 0x4>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <0 105 0x4>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <0 106 0x4>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48820000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48820000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@48822000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48822000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@48824000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48824000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48826000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48826000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap4-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <0 80 0x4>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <0 62 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <0 60 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <0 65 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <0 66 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <0 91 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <0 48 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+		};
+	};
+};