@@ -24,6 +24,7 @@
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "psb_drv.h"
+#include "framebuffer.h"
/**
* Returns whether any output on the specified pipe is of the specified type
@@ -46,6 +47,331 @@ bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
return false;
}
+void gma_wait_for_vblank(struct drm_device *dev)
+{
+ /* Wait for 20ms, i.e. one cycle at 50hz. */
+ mdelay(20);
+}
+
+int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+ int pipe = psb_intel_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ unsigned long start, offset;
+ u32 dspcntr;
+ int ret = 0;
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ /* no fb bound */
+ if (!crtc->fb) {
+ dev_err(dev->dev, "No FB bound\n");
+ goto gma_pipe_cleaner;
+ }
+
+ /* We are displaying this buffer, make sure it is actually loaded
+ into the GTT */
+ ret = psb_gtt_pin(psbfb->gtt);
+ if (ret < 0)
+ goto gma_pipe_set_base_exit;
+ start = psbfb->gtt->offset;
+ offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
+
+ REG_WRITE(map->stride, crtc->fb->pitches[0]);
+
+ dspcntr = REG_READ(map->cntr);
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+ switch (crtc->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ dev_err(dev->dev, "Unknown color depth\n");
+ ret = -EINVAL;
+ goto gma_pipe_set_base_exit;
+ }
+ REG_WRITE(map->cntr, dspcntr);
+
+ dev_dbg(dev->dev,
+ "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+
+ /* FIXME: Investigate whether this really is the base for psb and why
+ the linear offset is named base for the other chips. map->surf
+ should be the base and map->linoff the offset for all chips */
+ if (IS_PSB(dev)) {
+ REG_WRITE(map->base, offset + start);
+ REG_READ(map->base);
+ } else {
+ REG_WRITE(map->base, offset);
+ REG_READ(map->base);
+ REG_WRITE(map->surf, start);
+ REG_READ(map->surf);
+ }
+
+gma_pipe_cleaner:
+ /* If there was a previous display we can now unpin it */
+ if (old_fb)
+ psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+gma_pipe_set_base_exit:
+ gma_power_end(dev);
+ return ret;
+}
+
+/* Loads the palette/gamma unit for the CRTC with the prepared values */
+void gma_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe];
+ int palreg = map->palette;
+ int i;
+
+ /* The clocks have to be on to load the palette. */
+ if (!crtc->enabled)
+ return;
+
+ if (gma_power_begin(dev, false)) {
+ for (i = 0; i < 256; i++) {
+ REG_WRITE(palreg + 4 * i,
+ ((psb_intel_crtc->lut_r[i] +
+ psb_intel_crtc->lut_adj[i]) << 16) |
+ ((psb_intel_crtc->lut_g[i] +
+ psb_intel_crtc->lut_adj[i]) << 8) |
+ (psb_intel_crtc->lut_b[i] +
+ psb_intel_crtc->lut_adj[i]));
+ }
+ gma_power_end(dev);
+ } else {
+ for (i = 0; i < 256; i++) {
+ /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
+ dev_priv->regs.pipe[0].palette[i] =
+ ((psb_intel_crtc->lut_r[i] +
+ psb_intel_crtc->lut_adj[i]) << 16) |
+ ((psb_intel_crtc->lut_g[i] +
+ psb_intel_crtc->lut_adj[i]) << 8) |
+ (psb_intel_crtc->lut_b[i] +
+ psb_intel_crtc->lut_adj[i]);
+ }
+
+ }
+}
+
+void gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
+ u32 start, u32 size)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int i;
+ int end = (start + size > 256) ? 256 : start + size;
+
+ for (i = start; i < end; i++) {
+ psb_intel_crtc->lut_r[i] = red[i] >> 8;
+ psb_intel_crtc->lut_g[i] = green[i] >> 8;
+ psb_intel_crtc->lut_b[i] = blue[i] >> 8;
+ }
+
+ gma_crtc_load_lut(crtc);
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ u32 temp;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+
+ /* FIXME: Uncomment this when we move cdv to generic dpms
+ if (IS_CDV(dev))
+ cdv_intel_disable_self_refresh(dev);
+ */
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ if (psb_intel_crtc->active)
+ break;
+
+ psb_intel_crtc->active = true;
+
+ /* Enable the DPLL */
+ temp = REG_READ(map->dpll);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ REG_WRITE(map->dpll, temp);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+
+ /* Enable the plane */
+ temp = REG_READ(map->cntr);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE(map->cntr,
+ temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(map->base, REG_READ(map->base));
+ }
+
+ udelay(150);
+
+ /* Enable the pipe */
+ temp = REG_READ(map->conf);
+ if ((temp & PIPEACONF_ENABLE) == 0)
+ REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
+
+ temp = REG_READ(map->status);
+ temp &= ~(0xFFFF);
+ temp |= PIPE_FIFO_UNDERRUN;
+ REG_WRITE(map->status, temp);
+ REG_READ(map->status);
+
+ gma_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, true); TODO */
+ break;
+ case DRM_MODE_DPMS_OFF:
+ if (!psb_intel_crtc->active)
+ break;
+
+ psb_intel_crtc->active = false;
+
+ /* Give the overlay scaler a chance to disable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Turn off vblank interrupts */
+ drm_vblank_off(dev, pipe);
+
+ /* Wait for vblank for the disable to take effect */
+ gma_wait_for_vblank(dev);
+
+ /* Disable plane */
+ temp = REG_READ(map->cntr);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE(map->cntr,
+ temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(map->base, REG_READ(map->base));
+ REG_READ(map->base);
+ }
+
+ /* Disable pipe */
+ temp = REG_READ(map->conf);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
+ REG_READ(map->conf);
+ }
+
+ /* Wait for vblank for the disable to take effect. */
+ gma_wait_for_vblank(dev);
+
+ udelay(150);
+
+ /* Disable DPLL */
+ temp = REG_READ(map->dpll);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ break;
+ }
+
+ /* FIXME: Uncomment this when we move cdv to generic dpms
+ if (IS_CDV(dev))
+ cdv_intel_update_watermark(dev, crtc);
+ */
+
+ /* Set FIFO watermarks */
+ REG_WRITE(DSPARB, 0x3F3E);
+}
+
+bool gma_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+void gma_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+void gma_crtc_commit(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void gma_crtc_disable(struct drm_crtc *crtc)
+{
+ struct gtt_range *gt;
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+ if (crtc->fb) {
+ gt = to_psb_fb(crtc->fb)->gtt;
+ psb_gtt_unpin(gt);
+ }
+}
+
+void gma_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+
+ kfree(psb_intel_crtc->crtc_state);
+ drm_crtc_cleanup(crtc);
+ kfree(psb_intel_crtc);
+}
+
#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
bool gma_pll_is_valid(struct drm_crtc *crtc,
@@ -61,6 +61,20 @@ struct gma_clock_funcs {
/* Common pipe related functions */
extern bool gma_pipe_has_type(struct drm_crtc *crtc, int type);
+extern void gma_wait_for_vblank(struct drm_device *dev);
+extern int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb);
+extern void gma_crtc_load_lut(struct drm_crtc *crtc);
+extern void gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, u32 start, u32 size);
+extern void gma_crtc_dpms(struct drm_crtc *crtc, int mode);
+extern bool gma_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+extern void gma_crtc_prepare(struct drm_crtc *crtc);
+extern void gma_crtc_commit(struct drm_crtc *crtc);
+extern void gma_crtc_disable(struct drm_crtc *crtc);
+extern void gma_crtc_destroy(struct drm_crtc *crtc);
/* Common clock related functions */
extern const struct gma_limit_t *gma_limit(struct drm_crtc *crtc, int refclk);
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> --- drivers/gpu/drm/gma500/gma_display.c | 326 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/gma500/gma_display.h | 14 ++ 2 files changed, 340 insertions(+)