diff mbox

[1/4] ARM: dts: Hook up IRQ for PMIC on Arndale

Message ID 1374063448-20517-1-git-send-email-broonie@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Mark Brown July 17, 2013, 12:17 p.m. UTC 
From: Mark Brown <broonie@linaro.org>

The out of tree code configures a pullup on the line indicating that it
is an active low interrupt.

Signed-off-by: Mark Brown <broonie@linaro.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 3 +++
 1 file changed, 3 insertions(+)

Comments

kgene@kernel.org July 24, 2013, 1:51 a.m. UTC | #1 
Mark Brown wrote:
> 
> From: Mark Brown <broonie@linaro.org>
> 
> The out of tree code configures a pullup on the line indicating that it
> is an active low interrupt.
> 
> Signed-off-by: Mark Brown <broonie@linaro.org>
> ---
>  arch/arm/boot/dts/exynos5250-arndale.dts | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
> b/arch/arm/boot/dts/exynos5250-arndale.dts
> index abc7272..dab40ae 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -11,6 +11,7 @@
> 
>  /dts-v1/;
>  #include "exynos5250.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
> 
>  / {
>  	model = "Insignal Arndale evaluation board based on EXYNOS5250";
> @@ -37,6 +38,8 @@
>  		s5m8767_pmic@66 {
>  			compatible = "samsung,s5m8767-pmic";
>  			reg = <0x66>;
> +			interrupt-parent = <&gpx3>;
> +			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> 
>  			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
>  			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
> --
> 1.8.3.2

I'm fine on this whole series. Applied 1 to 4, thanks.

- Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272..dab40ae 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@ 
 
 /dts-v1/;
 #include "exynos5250.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -37,6 +38,8 @@ 
 		s5m8767_pmic@66 {
 			compatible = "samsung,s5m8767-pmic";
 			reg = <0x66>;
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 
 			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
 			s5m8767,pmic-buck3-dvs-voltage = <1100000>;