| Message ID | 20130809100755.10827.10538.sendpatchset@w520 (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Fri, Aug 09, 2013 at 07:07:55PM +0900, Magnus Damm wrote: > From: Magnus Damm <damm@opensource.se> > > Add r8a7790 SMP support using the shared APMU code. To enable > SMP the r8a7790 specific DTS needs to be updated to include > CPU cores, and this is happening in a separate patch. > > Signed-off-by: Magnus Damm <damm@opensource.se> > --- > > arch/arm/mach-shmobile/Makefile | 1 > arch/arm/mach-shmobile/include/mach/r8a7790.h | 1 > arch/arm/mach-shmobile/setup-r8a7790.c | 3 + > arch/arm/mach-shmobile/smp-r8a7790.c | 67 +++++++++++++++++++++++++ > 4 files changed, 72 insertions(+) > > --- 0011/arch/arm/mach-shmobile/Makefile > +++ work/arch/arm/mach-shmobile/Makefile 2013-08-07 20:10:54.000000000 +0900 > @@ -35,6 +35,7 @@ smp-y := platsmp.o headsmp.o > smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o > smp-$(CONFIG_ARCH_R8A73A4) += smp-r8a73a4.o platsmp-apmu.o > smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o > +smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o > smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o > > # IRQ objects > --- 0009/arch/arm/mach-shmobile/include/mach/r8a7790.h > +++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h 2013-08-07 20:10:54.000000000 +0900 > @@ -7,6 +7,7 @@ void r8a7790_clock_init(void); > void r8a7790_pinmux_init(void); > void r8a7790_init_early(void); > void r8a7790_timer_init(void); > +extern struct smp_operations r8a7790_smp_ops; > > #define MD(nr) BIT(nr) > u32 r8a7790_read_mode_pins(void); > --- 0009/arch/arm/mach-shmobile/setup-r8a7790.c > +++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-08-07 20:10:54.000000000 +0900 > @@ -272,6 +272,9 @@ void __init r8a7790_init_early(void) > #ifndef CONFIG_ARM_ARCH_TIMER > shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ > #endif > +#ifdef CONFIG_SMP > + smp_set_ops(&r8a7790_smp_ops); > +#endif > } > > #ifdef CONFIG_USE_OF As per your email to Olof and Arnd regarding the r8a73a4 version of this change, I am holding off on this until there is some determination if it is preferred to set smp_set_ops() in ->init_early(i) or to use the (more traditional) method of setting smp_ops directly in the per-board DT_MACHINE_START. > --- /dev/null > +++ work/arch/arm/mach-shmobile/smp-r8a7790.c 2013-08-07 20:10:55.000000000 +0900 > @@ -0,0 +1,67 @@ > +/* > + * SMP support for r8a7790 > + * > + * Copyright (C) 2012-2013 Renesas Solutions Corp. > + * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; version 2 of the License. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/smp.h> > +#include <linux/io.h> > +#include <asm/smp_plat.h> > +#include <mach/common.h> > + > +#define RST 0xe6160000 > +#define CA15BAR 0x0020 > +#define CA7BAR 0x0030 > +#define CA15RESCNT 0x0040 > +#define CA7RESCNT 0x0044 > +#define MERAM 0xe8080000 > + > +static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) > +{ > + void __iomem *p; > + u32 bar; > + > + /* let APMU code install data related to shmobile_boot_vector */ > + shmobile_smp_apmu_prepare_cpus(max_cpus); > + > + /* MERAM for jump stub, because BAR requires 256KB aligned address */ > + p = ioremap_nocache(MERAM, shmobile_boot_size); > + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); > + iounmap(p); > + > + /* setup reset vectors */ > + p = ioremap_nocache(RST, 0x63); > + bar = (MERAM >> 8) & 0xfffffc00; > + writel_relaxed(bar, p + CA15BAR); > + writel_relaxed(bar, p + CA7BAR); > + writel_relaxed(bar | 0x10, p + CA15BAR); > + writel_relaxed(bar | 0x10, p + CA7BAR); > + > + /* enable clocks to all CPUs */ > + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, > + p + CA15RESCNT); > + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, > + p + CA7RESCNT); > + iounmap(p); > +} > + > +struct smp_operations r8a7790_smp_ops __initdata = { > + .smp_prepare_cpus = r8a7790_smp_prepare_cpus, > + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, > +#ifdef CONFIG_HOTPLUG_CPU > + .cpu_disable = shmobile_smp_cpu_disable, > + .cpu_die = shmobile_smp_apmu_cpu_die, > + .cpu_kill = shmobile_smp_apmu_cpu_kill, > +#endif > +}; > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- 0011/arch/arm/mach-shmobile/Makefile +++ work/arch/arm/mach-shmobile/Makefile 2013-08-07 20:10:54.000000000 +0900 @@ -35,6 +35,7 @@ smp-y := platsmp.o headsmp.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A73A4) += smp-r8a73a4.o platsmp-apmu.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o +smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # IRQ objects --- 0009/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h 2013-08-07 20:10:54.000000000 +0900 @@ -7,6 +7,7 @@ void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); void r8a7790_init_early(void); void r8a7790_timer_init(void); +extern struct smp_operations r8a7790_smp_ops; #define MD(nr) BIT(nr) u32 r8a7790_read_mode_pins(void); --- 0009/arch/arm/mach-shmobile/setup-r8a7790.c +++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-08-07 20:10:54.000000000 +0900 @@ -272,6 +272,9 @@ void __init r8a7790_init_early(void) #ifndef CONFIG_ARM_ARCH_TIMER shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ #endif +#ifdef CONFIG_SMP + smp_set_ops(&r8a7790_smp_ops); +#endif } #ifdef CONFIG_USE_OF --- /dev/null +++ work/arch/arm/mach-shmobile/smp-r8a7790.c 2013-08-07 20:10:55.000000000 +0900 @@ -0,0 +1,67 @@ +/* + * SMP support for r8a7790 + * + * Copyright (C) 2012-2013 Renesas Solutions Corp. + * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <asm/smp_plat.h> +#include <mach/common.h> + +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA7BAR 0x0030 +#define CA15RESCNT 0x0040 +#define CA7RESCNT 0x0044 +#define MERAM 0xe8080000 + +static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) +{ + void __iomem *p; + u32 bar; + + /* let APMU code install data related to shmobile_boot_vector */ + shmobile_smp_apmu_prepare_cpus(max_cpus); + + /* MERAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(MERAM, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (MERAM >> 8) & 0xfffffc00; + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar, p + CA7BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA7BAR); + + /* enable clocks to all CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, + p + CA15RESCNT); + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, + p + CA7RESCNT); + iounmap(p); +} + +struct smp_operations r8a7790_smp_ops __initdata = { + .smp_prepare_cpus = r8a7790_smp_prepare_cpus, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = shmobile_smp_cpu_disable, + .cpu_die = shmobile_smp_apmu_cpu_die, + .cpu_kill = shmobile_smp_apmu_cpu_kill, +#endif +};