@@ -251,6 +251,66 @@ static const struct cx18_card cx18_card_
/* ------------------------------------------------------------------------- */
+/* GoTView PCI */
+
+static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = {
+ { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 },
+ { 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_gotview_dvd3 = {
+ .type = CX18_CARD_GOTVIEW_PCI_DVD3,
+ .name = "GoTView PCI DVD3 Hybrid",
+ .comment = "Experimenters needed for device to work well.\n"
+ "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
+ .hw_audio_ctrl = CX18_HW_418_AV,
+ .hw_muxer = CX18_HW_GPIO_MUX,
+ .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+ CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+ .video_inputs = {
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
+ { CX18_CARD_INPUT_SVIDEO1, 1,
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+ { CX18_CARD_INPUT_SVIDEO2, 2,
+ CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+ },
+ .audio_inputs = {
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
+ { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 },
+ },
+ .tuners = {
+ /* XC3028 tuner */
+ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+ },
+ /* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+ .ddr = {
+ /* Hynix HY5DU283222B DDR RAM */
+ .chip_config = 0x303,
+ .refresh = 0x3bd,
+ .timing1 = 0x36320966,
+ .timing2 = 0x1f,
+ .tune_lane = 0,
+ .initial_emrs = 2,
+ },
+ .gpio_init.initial_value = 0x1,
+ .gpio_init.direction = 0x3,
+
+ .gpio_audio_input = { .mask = 0x3,
+ .tuner = 0x1,
+ .linein = 0x2,
+ .radio = 0x1 },
+ .xceive_pin = 0,
+ .pci_list = cx18_pci_gotview_dvd3,
+ .i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
/* Conexant Raptor PAL/SECAM: note that this card is analog only! */
static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = {
@@ -463,6 +523,7 @@ static const struct cx18_card *cx18_card
&cx18_card_toshiba_qosmio_dvbt,
&cx18_card_leadtek_pvr2100,
&cx18_card_leadtek_dvr3100h,
+ &cx18_card_gotview_dvd3
};
const struct cx18_card *cx18_get_card(u16 index)
@@ -156,6 +156,7 @@ MODULE_PARM_DESC(cardtype,
"\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
"\t\t\t 7 = Leadtek WinFast PVR2100\n"
"\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
+ "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -333,6 +334,7 @@ void cx18_read_eeprom(struct cx18 *cx, s
tveeprom_hauppauge_analog(&c, tv, eedata);
break;
case CX18_CARD_YUAN_MPC718:
+ case CX18_CARD_GOTVIEW_PCI_DVD3:
tv->model = 0x718;
cx18_eeprom_dump(cx, eedata, sizeof(eedata));
CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n",
@@ -84,7 +84,8 @@
#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */
-#define CX18_CARD_LAST 7
+#define CX18_CARD_GOTVIEW_PCI_DVD3 8 /* GoTView PCI DVD3 Hybrid */
+#define CX18_CARD_LAST 8
#define CX18_ENC_STREAM_TYPE_MPG 0
#define CX18_ENC_STREAM_TYPE_TS 1
@@ -106,6 +107,7 @@
#define CX18_PCI_ID_CONEXANT 0x14f1
#define CX18_PCI_ID_TOSHIBA 0x1179
#define CX18_PCI_ID_LEADTEK 0x107D
+#define CX18_PCI_ID_GOTVIEW 0x5854
/* ======================================================================== */
/* ========================== START USER SETTABLE DMA VARIABLES =========== */
@@ -203,6 +203,14 @@ static struct zl10353_config yuan_mpc718
.disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
+static struct zl10353_config gotview_dvd3_zl10353_demod = {
+ .demod_address = 0x1e >> 1, /* Datasheet suggested straps */
+ .if2 = 45600, /* 4.560 MHz IF from the XC3028 */
+ .parallel_ts = 1, /* Not a serial TS */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
+};
+
static int dvb_register(struct cx18_stream *stream);
/* Kernel DVB framework calls this when the feed needs to start.
@@ -247,6 +255,7 @@ static int cx18_dvb_start_feed(struct dv
case CX18_CARD_LEADTEK_DVR3100H:
case CX18_CARD_YUAN_MPC718:
+ case CX18_CARD_GOTVIEW_PCI_DVD3:
default:
/* Assumption - Parallel transport - Signalling
* undefined or default.
@@ -495,6 +504,29 @@ static int dvb_register(struct cx18_stre
fe->ops.tuner_ops.set_config(fe, &ctrl);
}
break;
+ case CX18_CARD_GOTVIEW_PCI_DVD3:
+ dvb->fe = dvb_attach(zl10353_attach,
+ &gotview_dvd3_zl10353_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &cx->i2c_adap[1],
+ .i2c_addr = 0xc2 >> 1,
+ .ctrl = NULL,
+ };
+ static struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ .type = XC2028_AUTO,
+ };
+
+ fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctrl);
+ }
+ break;
default:
/* No Digital Tv Support */
break;