diff mbox

[3/7] arm: dts: dra7: add bandgap entry

Message ID 1380652344-18819-4-git-send-email-eduardo.valentin@ti.com (mailing list archive)
State Accepted
Delegated to: Eduardo Valentin
Headers show

Commit Message

Eduardo Valentin Oct. 1, 2013, 6:32 p.m. UTC
This patch adds bandgap IP entry on DRA7 dtsi device tree file.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Nishanth Menon Oct. 1, 2013, 10:46 p.m. UTC | #1
On 14:32-20131001, Eduardo Valentin wrote:
> This patch adds bandgap IP entry on DRA7 dtsi device tree file.
> 
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
>  arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3a746c2..4e9b159 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -53,6 +53,18 @@
>  		};
>  	};
>  
> +	bandgap: bandgap {
	would you like to follow bandgap: bandgap@4a0021e0 convention?
Also, could you move it under ocp?
I already commented about this previously here: 
https://lkml.org/lkml/2013/9/27/300

> +		reg = <0x4a0021e0 0xc
> +			0x4a00232c 0xc
> +			0x4a002380 0x2c
> +			0x4a0023C0 0x3c
> +			0x4a002564 0x8
> +			0x4a002574 0x50>;
> +		compatible = "ti,dra752-bandgap";
> +		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> +		#thermal-sensor-cells = <1>;
> +	};
> +
>  	gic: interrupt-controller@48211000 {
>  		compatible = "arm,cortex-a15-gic";
>  		interrupt-controller;
Eduardo Valentin Oct. 2, 2013, 1:28 a.m. UTC | #2
On 01-10-2013 18:46, Nishanth Menon wrote:
> On 14:32-20131001, Eduardo Valentin wrote:
>> This patch adds bandgap IP entry on DRA7 dtsi device tree file.
>>
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>>  arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
>> index 3a746c2..4e9b159 100644
>> --- a/arch/arm/boot/dts/dra7.dtsi
>> +++ b/arch/arm/boot/dts/dra7.dtsi
>> @@ -53,6 +53,18 @@
>>  		};
>>  	};
>>  
>> +	bandgap: bandgap {
> 	would you like to follow bandgap: bandgap@4a0021e0 convention?
> Also, could you move it under ocp?
> I already commented about this previously here: 
> https://lkml.org/lkml/2013/9/27/300

yes, this can be done.

> 
>> +		reg = <0x4a0021e0 0xc
>> +			0x4a00232c 0xc
>> +			0x4a002380 0x2c
>> +			0x4a0023C0 0x3c
>> +			0x4a002564 0x8
>> +			0x4a002574 0x50>;
>> +		compatible = "ti,dra752-bandgap";
>> +		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
>> +		#thermal-sensor-cells = <1>;
>> +	};
>> +
>>  	gic: interrupt-controller@48211000 {
>>  		compatible = "arm,cortex-a15-gic";
>>  		interrupt-controller;
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a746c2..4e9b159 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -53,6 +53,18 @@ 
 		};
 	};
 
+	bandgap: bandgap {
+		reg = <0x4a0021e0 0xc
+			0x4a00232c 0xc
+			0x4a002380 0x2c
+			0x4a0023C0 0x3c
+			0x4a002564 0x8
+			0x4a002574 0x50>;
+		compatible = "ti,dra752-bandgap";
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		#thermal-sensor-cells = <1>;
+	};
+
 	gic: interrupt-controller@48211000 {
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;