diff mbox

xfstests: add generic/320 to test fsync() on directories V2

Message ID 1382975391-26843-1-git-send-email-jbacik@fusionio.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Josef Bacik Oct. 28, 2013, 3:49 p.m. UTC 
Btrfs had some issues with fsync()'ing directories and fsync()'ing after
renames.  These three new tests cover the 3 different issues we were seeing.
This breaks out the dmflakey stuff into a common helper to be shared between
generic/311 and generic/320. Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
---
V1->V2: moved this out into its own test instead of adding it to 311

 common/dmflakey       |  74 ++++++++++++++++++++++++++
 tests/generic/311     |  56 +++-----------------
 tests/generic/320     | 140 ++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/320.out |   9 ++++
 tests/generic/group   |   1 +
 5 files changed, 231 insertions(+), 49 deletions(-)
 create mode 100644 common/dmflakey
 create mode 100644 tests/generic/320
 create mode 100644 tests/generic/320.out
diff mbox

Patch

diff --git a/common/dmflakey b/common/dmflakey
new file mode 100644
index 0000000..bc984bd
--- /dev/null
+++ b/common/dmflakey
@@ -0,0 +1,74 @@ 
+##/bin/bash
+#
+# Copyright (c) 2013 Fusion IO, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+# common functions for setting up and tearing down a dmflakey device
+
+FLAKEY_ALLOW_WRITES=0
+FLAKEY_DROP_WRITES=1
+
+_init_flakey()
+{
+	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
+	FLAKEY_DEV=/dev/mapper/flakey-test
+	FLAKEY_TABLE="0 $BLK_DEV_SIZE flakey $SCRATCH_DEV 0 180 0"
+	FLAKEY_TABLE_DROP="0 $BLK_DEV_SIZE flakey $SCRATCH_DEV 0 0 180 1 drop_writes"
+	$DMSETUP_PROG create flakey-test --table "$FLAKEY_TABLE" || \
+		_fatal "failed to create flakey device"
+}
+
+_mount_flakey()
+{
+	mount -t $FSTYP $MOUNT_OPTIONS $FLAKEY_DEV $SCRATCH_MNT
+}
+
+_unmount_flakey()
+{
+	$UMOUNT_PROG $SCRATCH_MNT
+}
+
+_cleanup_flakey()
+{
+	# If dmsetup load fails then we need to make sure to do resume here
+	# otherwise the umount will hang
+	$DMSETUP_PROG resume flakey-test > /dev/null 2>&1
+	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	$DMSETUP_PROG remove flakey-test > /dev/null 2>&1
+}
+
+# _load_flakey_table <table> [lockfs]
+#
+# This defaults to --nolockfs, which doesn't freeze_fs() before loading the new
+# table, so it simulates power failure.
+_load_flakey_table()
+{
+
+	table="$FLAKEY_TABLE"
+	[ $1 -eq $FLAKEY_DROP_WRITES ] && table="$FLAKEY_TABLE_DROP"
+
+	suspend_opt="--nolockfs"
+	[ $# -gt 1 ] && [ $2 -eq 1 ] && suspend_opt=""
+
+	$DMSETUP_PROG suspend $suspend_opt flakey-test
+	[ $? -ne 0 ] && _fatal "failed to suspend flakey-test"
+
+	$DMSETUP_PROG load flakey-test --table "$table"
+	[ $? -ne 0 ] && _fatal "failed to load table into flakey-test"
+
+	$DMSETUP_PROG resume flakey-test
+	[ $? -ne 0 ] && _fatal  "failed to resumeflakey-test"
+}
diff --git a/tests/generic/311 b/tests/generic/311
index 675d927..6802a96 100644
--- a/tests/generic/311
+++ b/tests/generic/311
@@ -41,17 +41,14 @@  status=1	# failure is the default!
 
 _cleanup()
 {
-	# If dmsetup load fails then we need to make sure to do resume here
-	# otherwise the umount will hang
-	$DMSETUP_PROG resume flakey-test > /dev/null 2>&1
-	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
-	$DMSETUP_PROG remove flakey-test > /dev/null 2>&1
+	_cleanup_flakey
 }
 trap "_cleanup; exit \$status" 0 1 2 3 15
 
 # get standard environment, filters and checks
 . ./common/rc
 . ./common/filter
+. ./common/dmflakey
 
 # real QA test starts here
 _supported_fs generic
@@ -63,49 +60,12 @@  _require_dm_flakey
 [ -x $here/src/fsync-tester ] || _notrun "fsync-tester not build"
 
 rm -f $seqres.full
-BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
-FLAKEY_DEV=/dev/mapper/flakey-test
 SEED=1
 testfile=$SCRATCH_MNT/$seq.fsync
-FLAKEY_TABLE="0 $BLK_DEV_SIZE flakey $SCRATCH_DEV 0 180 0"
-FLAKEY_TABLE_DROP="0 $BLK_DEV_SIZE flakey $SCRATCH_DEV 0 0 180 1 drop_writes"
-_TEST_OPTIONS=""
-
-_mount_flakey()
-{
-	mount -t $FSTYP $MOUNT_OPTIONS $FLAKEY_DEV $SCRATCH_MNT
-}
-
-_unmount_flakey()
-{
-	$UMOUNT_PROG $SCRATCH_MNT
-}
-
-_load_flakey_table()
-{
-	# _load_flakey_table <table>
-
-	table="$FLAKEY_TABLE"
-	[ $1 -eq 1 ] && table="$FLAKEY_TABLE_DROP"
-
-	suspend_opt=""
-	[ $nolockfs -eq 1 ] && suspend_opt="--nolockfs"
-
-	$DMSETUP_PROG suspend $suspend_opt flakey-test
-	[ $? -ne 0 ] && _fatal "failed to suspend flakey-test"
-
-	$DMSETUP_PROG load flakey-test --table "$table"
-	[ $? -ne 0 ] && _fatal "failed to load table into flakey-test"
-
-	$DMSETUP_PROG resume flakey-test
-	[ $? -ne 0 ] && _fatal  "failed to resumeflakey-test"
-}
 
 _run_test()
 {
 	# _run_test <testnum> <0 - buffered | 1 - O_DIRECT>
-	allow_writes=0
-	drop_writes=1
 	test_num=$1
 
 	direct_opt=""
@@ -115,11 +75,11 @@  _run_test()
 	[ $? -ne 0 ] && _fatal "fsync tester exited abnormally"
 
 	_md5_checksum $testfile
-	_load_flakey_table $drop_writes
+	_load_flakey_table $FLAKEY_DROP_WRITES $lockfs
 	_unmount_flakey
 
 	#Ok mount so that any recovery that needs to happen is done
-	_load_flakey_table $allow_writes
+	_load_flakey_table $FLAKEY_ALLOW_WRITES
 	_mount_flakey
 	_md5_checksum $testfile
 
@@ -134,23 +94,21 @@  _run_test()
 _scratch_mkfs >> $seqres.full 2>&1
 
 # Create a basic flakey device that will never error out
-$DMSETUP_PROG create flakey-test --table "$FLAKEY_TABLE"
-[ $? -ne 0 ] && _fatal "failed to create flakey device"
-
+_init_flakey
 _mount_flakey
 
 buffered=0
 direct=1
 
 for i in $(seq 1 20); do
-	nolockfs=0
+	lockfs=1
 	SEED=$i
 	echo "Running test $i buffered, normal suspend"
 	_run_test $i $buffered
 	echo "Running test $i direct, normal suspend"
 	_run_test $i $direct
 
-	nolockfs=1
+	lockfs=0
 	echo "Running test $i buffered, nolockfs"
 	_run_test $i $buffered
 	echo "Running test $i direct, nolockfs"
diff --git a/tests/generic/320 b/tests/generic/320
new file mode 100644
index 0000000..4b4a77c
--- /dev/null
+++ b/tests/generic/320
@@ -0,0 +1,140 @@ 
+#! /bin/bash
+# FS QA Test No. 320
+#
+# Runs various dir fsync tests to cover fsync'ing directory corner cases.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Fusion IO. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1	# failure is the default!
+
+_cleanup()
+{
+	_cleanup_flakey
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmflakey
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_need_to_be_root
+_require_scratch
+_require_dm_flakey
+
+rm -f $seqres.full
+
+_clean_working_dir()
+{
+	_mount_flakey
+	rm -rf $SCRATCH_MNT/*
+	_unmount_flakey
+}
+
+# Btrfs wasn't making sure the directory survived fsync
+_directory_test()
+{
+	echo "fsync new directory"
+	_mount_flakey
+	mkdir $SCRATCH_MNT/bar
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
+	_load_flakey_table $FLAKEY_DROP_WRITES
+	_unmount_flakey
+
+	_load_flakey_table $FLAKEY_ALLOW_WRITES
+	_mount_flakey
+	_ls_l $SCRATCH_MNT | tail -n +2 | awk '{ print $1, $9 }'
+	_unmount_flakey
+	_check_scratch_fs $FLAKEY_DEV
+	[ $? -ne 0 ] && _fatal "fsck failed"
+}
+
+# Btrfs was losing a rename into a new directory
+_rename_test()
+{
+	echo "rename fsync test"
+	_mount_flakey
+	touch $SCRATCH_MNT/foo
+	mkdir $SCRATCH_MNT/bar
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
+	mv $SCRATCH_MNT/foo $SCRATCH_MNT/bar/foo
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar/foo
+	_load_flakey_table $FLAKEY_DROP_WRITES
+	_unmount_flakey
+
+	_load_flakey_table $FLAKEY_ALLOW_WRITES
+	_mount_flakey
+	_ls_l $SCRATCH_MNT | tail -n +2 | awk '{ print $1, $9 }'
+	_ls_l $SCRATCH_MNT/bar | tail -n +2 | awk '{ print $1, $9 }'
+	_unmount_flakey
+	_check_scratch_fs $FLAKEY_DEV
+	[ $? -ne 0 ] && _fatal "fsck failed"
+}
+
+# Btrfs was failing to replay a log when we had a inode with a smaller inode
+# number that is renamed into a directory with a higher inode number
+_replay_rename_test()
+{
+	echo "replay rename fsync test"
+	_mount_flakey
+	touch $SCRATCH_MNT/foo
+	mkdir $SCRATCH_MNT/bar
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
+	mv $SCRATCH_MNT/foo $SCRATCH_MNT/bar/foo
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
+
+	# This is to force btrfs to relog the entire inode including the ref so
+	# we are sure to try and replay the ref along with the dir_index item
+	setfattr -n user.foo -v blah $SCRATCH_MNT/bar/foo >> $seqres.full 2>&1
+
+	$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar/foo
+	_load_flakey_table $FLAKEY_DROP_WRITES
+	_unmount_flakey
+
+	_load_flakey_table $FLAKEY_ALLOW_WRITES
+	_mount_flakey
+	_ls_l $SCRATCH_MNT | tail -n +2 | awk '{ print $1, $9 }'
+	_ls_l $SCRATCH_MNT/bar | tail -n +2 | awk '{ print $1, $9 }'
+	_unmount_flakey
+	_check_scratch_fs $FLAKEY_DEV
+	[ $? -ne 0 ] && _fatal "fsck failed"
+}
+
+_scratch_mkfs >> $seqres.full 2>&1
+
+# Create a basic flakey device that will never error out
+_init_flakey
+
+_directory_test
+_clean_working_dir
+_rename_test
+_clean_working_dir
+_replay_rename_test
+
+status=0
+exit
diff --git a/tests/generic/320.out b/tests/generic/320.out
new file mode 100644
index 0000000..6e563dd
--- /dev/null
+++ b/tests/generic/320.out
@@ -0,0 +1,9 @@ 
+QA output created by 320
+fsync new directory
+drwxr-xr-x bar
+rename fsync test
+drwxr-xr-x bar
+-rw-r--r-- foo
+replay rename fsync test
+drwxr-xr-x bar
+-rw-r--r-- foo
diff --git a/tests/generic/group b/tests/generic/group
index 3488c42..b48eab8 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -122,4 +122,5 @@ 
 317 auto metadata quick
 318 acl attr auto quick
 319 acl auto quick
+320 auto quick metadata log