ACPIPHP / radeon: Fix VGA switcheroo problem related to hotplug events

Commit Message

Rafael J. Wysocki Dec. 28, 2013, 10:13 p.m. UTC

From: Rafael J. Wysocki <[e-mail]>

The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made
during the 3.12 development cycle uncovered a problem with VGA
switcheroo that on some systems, when the device-specific method
(ATPX in the radeon case) is used to turn off the discrete
graphics, the BIOS generates ACPI hotplug events for that device and
those events cause ACPIPHP to attempt to remove the device from the
system (they are events for a device that was present previously and
is not present any more, so that's what should be done according to
the spec).  Then, the system stops functioning correctly.

Since the hotplug events in question were simply silently ignored
previously, the least intrusive way to address that problem is to
make ACPIPHP ignore them again.  For this purpose, introduce a new
ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug
events for PCI devices whose ACPI companions have that flag set.
Next, make the radeon switcheroo detection code set the no_hotplug
flag for the discrete graphics' ACPI companion.

References: https://bugzilla.kernel.org/show_bug.cgi?id=61891
Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge)
Reported-and-tested-by: Mike Lothian <[e-mail]>
Reported-and-tested-by: <[e-mail]>
Signed-off-by: Rafael J. Wysocki <[e-mail]>
Cc: Alex Deucher <[e-mail]>
Cc: Dave Airlie <[e-mail]>
Cc: Takashi Iwai <[e-mail]>
---

Hi All,

I have an analogous change for nouveau in the works and if that really turns
out to be the same issue, I'll just add the nouveau changes to this patch
and resend.

Thanks,
Rafael

---
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |   20 ++++++++++++++++++--
 drivers/pci/hotplug/acpiphp_glue.c           |   26 +++++++++++++++++++++++---
 include/acpi/acpi_bus.h                      |    3 ++-
 3 files changed, 43 insertions(+), 6 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

Index: linux-pm/drivers/gpu/drm/radeon/radeon_atpx_handler.c
===================================================================
--- linux-pm.orig/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ linux-pm/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -33,6 +33,7 @@  static struct radeon_atpx_priv {
 	bool atpx_detected;
 	/* handle for device - and atpx */
 	acpi_handle dhandle;
+	acpi_handle other_handle;
 	struct radeon_atpx atpx;
 } radeon_atpx_priv;
 
@@ -451,9 +452,10 @@  static bool radeon_atpx_pci_probe_handle
 		return false;
 
 	status = acpi_get_handle(dhandle, "ATPX", &atpx_handle);
-	if (ACPI_FAILURE(status))
+	if (ACPI_FAILURE(status)) {
+		radeon_atpx_priv.other_handle = dhandle;
 		return false;
-
+	}
 	radeon_atpx_priv.dhandle = dhandle;
 	radeon_atpx_priv.atpx.handle = atpx_handle;
 	return true;
@@ -526,10 +528,24 @@  static bool radeon_atpx_detect(void)
 	}
 
 	if (has_atpx && vga_count == 2) {
+		struct acpi_device *adev = NULL;
+
 		acpi_get_name(radeon_atpx_priv.atpx.handle, ACPI_FULL_PATHNAME, &buffer);
 		printk(KERN_INFO "VGA switcheroo: detected switching method %s handle\n",
 		       acpi_method_name);
 		radeon_atpx_priv.atpx_detected = true;
+		/*
+		 * On some systems hotplug events are generated for the device
+		 * being switched off when ATPX is executed.  They cause ACPI
+		 * hotplug to trigger and attempt to remove the device from
+		 * the system, which causes it to break down.  Prevent that from
+		 * happening by setting the no_hotplug flag for the ACPI device
+		 * object in question.
+		 */
+		acpi_bus_get_device(radeon_atpx_priv.other_handle, &adev);
+		if (adev)
+			adev->flags.no_hotplug = true;
+
 		return true;
 	}
 	return false;
Index: linux-pm/include/acpi/acpi_bus.h
===================================================================
--- linux-pm.orig/include/acpi/acpi_bus.h
+++ linux-pm/include/acpi/acpi_bus.h
@@ -169,7 +169,8 @@  struct acpi_device_flags {
 	u32 ejectable:1;
 	u32 power_manageable:1;
 	u32 match_driver:1;
-	u32 reserved:27;
+	u32 no_hotplug:1;
+	u32 reserved:26;
 };
 
 /* File System */
Index: linux-pm/drivers/pci/hotplug/acpiphp_glue.c
===================================================================
--- linux-pm.orig/drivers/pci/hotplug/acpiphp_glue.c
+++ linux-pm/drivers/pci/hotplug/acpiphp_glue.c
@@ -643,6 +643,24 @@  static void disable_slot(struct acpiphp_
 	slot->flags &= (~SLOT_ENABLED);
 }
 
+static bool acpiphp_no_hotplug(acpi_handle handle)
+{
+	struct acpi_device *adev = NULL;
+
+	acpi_bus_get_device(handle, &adev);
+	return adev && adev->flags.no_hotplug;
+}
+
+static bool slot_no_hotplug(struct acpiphp_slot *slot)
+{
+	struct acpiphp_func *func;
+
+	list_for_each_entry(func, &slot->funcs, sibling)
+		if (acpiphp_no_hotplug(func_to_handle(func)))
+			return true;
+
+	return false;
+}
 
 /**
  * get_slot_status - get ACPI slot status
@@ -701,7 +719,8 @@  static void trim_stale_devices(struct pc
 		unsigned long long sta;
 
 		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-		alive = ACPI_SUCCESS(status) && sta == ACPI_STA_ALL;
+		alive = (ACPI_SUCCESS(status) && sta == ACPI_STA_ALL)
+			|| acpiphp_no_hotplug(handle);
 	}
 	if (!alive) {
 		u32 v;
@@ -741,8 +760,9 @@  static void acpiphp_check_bridge(struct
 		struct pci_dev *dev, *tmp;
 
 		mutex_lock(&slot->crit_sect);
-		/* wake up all functions */
-		if (get_slot_status(slot) == ACPI_STA_ALL) {
+		if (slot_no_hotplug(slot)) {
+			; /* do nothing */
+		} else if (get_slot_status(slot) == ACPI_STA_ALL) {
 			/* remove stale devices if any */
 			list_for_each_entry_safe(dev, tmp, &bus->devices,
 						 bus_list)