@@ -241,7 +241,10 @@ void omap3_save_scratchpad_contents(void)
/* Populate the Scratchpad contents */
scratchpad_contents.boot_config_ptr = 0x0;
- if (omap_rev() != OMAP3430_REV_ES3_0 &&
+ if (cpu_is_omap3630())
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(get_omap3630_restore_pointer());
+ else if (omap_rev() != OMAP3430_REV_ES3_0 &&
omap_rev() != OMAP3430_REV_ES3_1)
scratchpad_contents.public_restore_ptr =
virt_to_phys(get_restore_pointer());
@@ -204,6 +204,10 @@
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
+/* 36xx-only RTA - Retention till Accesss control registers and bits */
+#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
+#define OMAP36XX_RTA_DISABLE 0x0
+
/* 34xx D2D idle-related pins, handled by PM core */
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
@@ -347,6 +351,7 @@ extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
extern u32 *get_restore_pointer(void);
extern u32 *get_es3_restore_pointer(void);
+extern u32 *get_omap3630_restore_pointer(void);
extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
@@ -54,6 +54,10 @@
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
+#define RTA_ERRATUM_i608 (1 << 0)
+static u16 pm34xx_errata;
+#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
+
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
@@ -979,6 +983,14 @@ void omap_push_sram_idle(void)
save_secure_ram_context_sz);
}
+static void pm_errata_configure(void)
+{
+ if (cpu_is_omap34xx()) {
+ if (cpu_is_omap3630())
+ pm34xx_errata |= RTA_ERRATUM_i608;
+ }
+}
+
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
@@ -988,6 +1000,8 @@ static int __init omap3_pm_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
+ pm_errata_configure();
+
printk(KERN_ERR "Power Management for TI OMAP3.\n");
/* XXX prcm_setup_regs needs to be before enabling hw
@@ -1035,6 +1049,15 @@ static int __init omap3_pm_init(void)
pm_idle = omap3_pm_idle;
omap3_idle_init();
+ /*
+ * RTA is disabled during initialization as per erratum i608
+ * it is safer to disable rta by the bootloader, but we would like
+ * to be doubly sure here and prevent any mishaps.
+ */
+ if (IS_PM34XX_ERRATUM(RTA_ERRATUM_i608))
+ omap_ctrl_writel(OMAP36XX_RTA_DISABLE,
+ OMAP36XX_CONTROL_MEM_RTA_CTRL);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
@@ -45,6 +45,8 @@
#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
#define SRAM_BASE_P 0x40200000
#define CONTROL_STAT 0x480022F0
+#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE\
+ + OMAP36XX_CONTROL_MEM_RTA_CTRL)
#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
* available */
#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
@@ -99,6 +101,14 @@ ENTRY(get_restore_pointer)
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
.word . - get_restore_pointer
+ .text
+/* Function call to get the restore pointer for 3630 resume from OFF */
+ENTRY(get_omap3630_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore_3630
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_omap3630_restore_pointer_sz)
+ .word . - get_omap3630_restore_pointer
.text
/* Function call to get the restore pointer for for ES3 to resume from OFF */
@@ -246,6 +256,20 @@ copy_to_sram:
bne copy_to_sram
ldr r1, sram_base
blx r1
+ b restore
+
+restore_3630:
+ /*b restore_es3630*/ @ Enable to debug restore code
+ ldr r1, pm_prepwstst_core_p
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if previous power state of CORE is OFF
+ bne restore
+ /* Disable rta before giving control */
+ ldr r1, control_mem_rta
+ mov r2, #OMAP36XX_RTA_DISABLE
+ str r2, [r1]
+ /* Fall thru for the remaining logic */
restore:
/* b restore*/ @ Enable to debug restore code
/* Check what was the reason for mpu reset and store the reason in r9*/
@@ -650,6 +674,8 @@ cache_pred_disable_mask:
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
+control_mem_rta:
+ .word CONTROL_MEM_RTA_CTRL
kernel_flush:
.word v7_flush_dcache_all
/* these 2 words need to be at the end !!! */