@@ -201,6 +201,47 @@
UUID_LE(0x036F84E1, 0x7F37, 0x428c, 0xA7, 0x9E, 0x57, 0x5F, \
0xDF, 0xAA, 0x84, 0xEC)
+#define CPER_PROC_VALID_TYPE 0x0001
+#define CPER_PROC_VALID_ISA 0x0002
+#define CPER_PROC_VALID_ERROR_TYPE 0x0004
+#define CPER_PROC_VALID_OPERATION 0x0008
+#define CPER_PROC_VALID_FLAGS 0x0010
+#define CPER_PROC_VALID_LEVEL 0x0020
+#define CPER_PROC_VALID_VERSION 0x0040
+#define CPER_PROC_VALID_BRAND_INFO 0x0080
+#define CPER_PROC_VALID_ID 0x0100
+#define CPER_PROC_VALID_TARGET_ADDRESS 0x0200
+#define CPER_PROC_VALID_REQUESTOR_ID 0x0400
+#define CPER_PROC_VALID_RESPONDER_ID 0x0800
+#define CPER_PROC_VALID_IP 0x1000
+
+#define CPER_MEM_VALID_ERROR_STATUS 0x0001
+#define CPER_MEM_VALID_PHYSICAL_ADDRESS 0x0002
+#define CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK 0x0004
+#define CPER_MEM_VALID_NODE 0x0008
+#define CPER_MEM_VALID_CARD 0x0010
+#define CPER_MEM_VALID_MODULE 0x0020
+#define CPER_MEM_VALID_BANK 0x0040
+#define CPER_MEM_VALID_DEVICE 0x0080
+#define CPER_MEM_VALID_ROW 0x0100
+#define CPER_MEM_VALID_COLUMN 0x0200
+#define CPER_MEM_VALID_BIT_POSITION 0x0400
+#define CPER_MEM_VALID_REQUESTOR_ID 0x0800
+#define CPER_MEM_VALID_RESPONDER_ID 0x1000
+#define CPER_MEM_VALID_TARGET_ID 0x2000
+#define CPER_MEM_VALID_ERROR_TYPE 0x4000
+
+#define CPER_PCIE_VALID_PORT_TYPE 0x0001
+#define CPER_PCIE_VALID_VERSION 0x0002
+#define CPER_PCIE_VALID_COMMAND_STATUS 0x0004
+#define CPER_PCIE_VALID_DEVICE_ID 0x0008
+#define CPER_PCIE_VALID_SERIAL_NUMBER 0x0010
+#define CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS 0x0020
+#define CPER_PCIE_VALID_CAPABILITY 0x0040
+#define CPER_PCIE_VALID_AER_INFO 0x0080
+
+#define CPER_PCIE_SLOT_SHIFT 3
+
/*
* All tables and structs must be byte-packed to match CPER
* specification, since the tables are provided by the system BIOS
@@ -306,6 +347,41 @@ struct cper_sec_mem_err {
__u8 error_type;
};
+struct cper_sec_pcie {
+ __u64 validation_bits;
+ __u32 port_type;
+ struct {
+ __u8 minor;
+ __u8 major;
+ __u8 reserved[2];
+ } version;
+ __u16 command;
+ __u16 status;
+ __u32 reserved;
+ struct {
+ __u16 vendor_id;
+ __u16 device_id;
+ __u8 class_code[3];
+ __u8 function;
+ __u8 device;
+ __u16 segment;
+ __u8 bus;
+ __u8 secondary_bus;
+ __u16 slot;
+ __u8 reserved;
+ } device_id;
+ struct {
+ __u32 lower;
+ __u32 upper;
+ } serial_number;
+ struct {
+ __u16 secondary_status;
+ __u16 control;
+ } bridge;
+ __u8 capability[60];
+ __u8 aer_info[96];
+};
+
/* Reset to default packing */
#pragma pack()