[0/7] PCI irq mapping fixes and cleanups
diff mbox

Message ID CAJ+vNU3UL+LTWnoxW7scAig19=z2xoYCA-HZ6a7GUyGEXtKK9Q@mail.gmail.com
State New, archived
Headers show

Commit Message

Tim Harvey March 3, 2014, 5:49 p.m. UTC
On Mon, Mar 3, 2014 at 12:11 AM, Jingoo Han <jg1.han@samsung.com> wrote:
> On Sunday, March 02, 2014 3:31 AM, Jason Gunthorpe wrote:
>> On Fri, Feb 28, 2014 at 04:53:33PM -0800, Tim Harvey wrote:
>>
>> > In testing this on IMX6 I'm finding that 'of_irq_parse_and_map_pci()'
>> > always returns -EINVAL because it can't find a dt node for the host
>> > bridge:
>> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/of/of_pci_irq.c#n60.
>>
>> There may be some kind of issue in the pcie-designware.c:
>>
>> static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>> {
>>         struct pci_bus *bus;
>>         struct pcie_port *pp = sys_to_pcie(sys);
>>
>>         if (pp) {
>>                 pp->root_bus_nr = sys->busnr;
>>                 bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
>>                                      ^^^^^^^^^^^
>>                                      Shouldn't be null for DT cases.
>>
>> Perhaps since the driver doesn't pass in a parent pointer, no parent
>> device is associated with the struct pci_bus that gets created, so
>> pci_bus_to_OF_node will always fail and the DT PCI mechanisms become
>> broken.
>
> Jason,
> Thank you for your advice. :-)

Jason,

Yes thank you - this does eliminate the -EINVAL from
of_irq_parse_pci() but something still is wrong (see below)

>
> Tim,
> I tested the following as Jason guided.

Jingoo,

Did you test this on in a configuration where devices are behind a
PCIe switch?  I'm still not getting the right IRQ's for that
configuration.

I'm working with the following patch:

The configuration I'm testing is:
root@OpenWrt:/# lspci -n
00:00.0 0604: 16c3:abcd (rev 01)
01:00.0 0604: 10b5:8609 (rev ba)
01:00.1 0880: 10b5:8609 (rev ba)
02:01.0 0604: 10b5:8609 (rev ba)
02:04.0 0604: 10b5:8609 (rev ba)
02:05.0 0604: 10b5:8609 (rev ba)
02:06.0 0604: 10b5:8609 (rev ba)
02:07.0 0604: 10b5:8609 (rev ba)
02:08.0 0604: 10b5:8609 (rev ba)
02:09.0 0604: 10b5:8609 (rev ba)
07:00.0 0280: 168c:002b (rev 01)
08:00.0 0200: 11ab:4380
root@OpenWrt:/# lspci -tnv
-[0000:00]---00.0-[01-09]--+-00.0-[02-09]--+-01.0-[03]--
                           |               +-04.0-[04]--
                           |               +-05.0-[05]--
                           |               +-06.0-[06]--
                           |               +-07.0-[07]----00.0  168c:002b
                           |               +-08.0-[08]----00.0  11ab:4380
                           |               \-09.0-[09]--
                           \-00.1  10b5:8609


The dev_info showing what of_irq_parse_and_map_pci() above produces:
[    1.818485] pci 0000:00:00.0: dw_pcie_map_irq: 16c3:abcd slot0 pin1 irq20
[    1.818703] pci 0000:01:00.0: dw_pcie_map_irq: 10b5:8609 slot0 pin1 irq20
[    1.818939] pci 0000:01:00.1: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
[    1.819179] pci 0000:02:01.0: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
[    1.819395] pci 0000:02:04.0: dw_pcie_map_irq: 10b5:8609 slot0 pin1 irq20
[    1.819631] pci 0000:02:05.0: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
[    1.819859] pci 0000:02:06.0: dw_pcie_map_irq: 10b5:8609 slot0 pin3 irq0
[    1.820087] pci 0000:02:07.0: dw_pcie_map_irq: 10b5:8609 slot0 pin4 irq0
[    1.820404] pci 0000:02:08.0: dw_pcie_map_irq: 10b5:8609 slot0 pin1 irq20
[    1.820650] pci 0000:02:09.0: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
[    1.820881] pci 0000:07:00.0: dw_pcie_map_irq: 168c:002b slot0 pin4 irq0
[    1.821100] pci 0000:08:00.0: dw_pcie_map_irq: 11ab:4380 slot0 pin1 irq20

I'm not clear why irq 20 is getting returned for all the slots with
(slot%4)=0 and func=0.  If I start debugging of_irq_parse_pci() I see
that it walks up the tree until it gets to the pcie host controller
then calls of_irq_parse_raw() which is returning irq20 or -EINVAL.

Tim

> You can test i.MX PCIe with this.
>
> ./drivers/pci/host/pcie-designware.c
> @@ -726,7 +727,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>
>         if (pp) {
>                 pp->root_bus_nr = sys->busnr;
> -               bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
> +               bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
>                                         sys, &sys->resources);
>         } else {
>                 bus = NULL;
>
> However, I think that we may need to replace 'pci_common_init()'
> with 'pci_common_init_dev()'.
>
> Best regards,
> Jingoo Han
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jason Gunthorpe March 3, 2014, 6:01 p.m. UTC | #1
On Mon, Mar 03, 2014 at 09:49:52AM -0800, Tim Harvey wrote:

> I'm not clear why irq 20 is getting returned for all the slots with
> (slot%4)=0 and func=0.  If I start debugging of_irq_parse_pci() I see
> that it walks up the tree until it gets to the pcie host controller
> then calls of_irq_parse_raw() which is returning irq20 or -EINVAL.

Can you share your DT as well?

Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tim Harvey March 3, 2014, 6:28 p.m. UTC | #2
On Mon, Mar 3, 2014 at 10:01 AM, Jason Gunthorpe
<jgunthorpe@obsidianresearch.com> wrote:
> On Mon, Mar 03, 2014 at 09:49:52AM -0800, Tim Harvey wrote:
>
>> I'm not clear why irq 20 is getting returned for all the slots with
>> (slot%4)=0 and func=0.  If I start debugging of_irq_parse_pci() I see
>> that it walks up the tree until it gets to the pcie host controller
>> then calls of_irq_parse_raw() which is returning irq20 or -EINVAL.
>
> Can you share your DT as well?

sure - I'm not sure what the best way to show this is (a dtc
commandline probably?).  This is from u-boot:

/ {
        board = "GW5410-SP275-B";
        system-serial = [35 30 38 38 30];
        #address-cells = <0x00000001>;
        #size-cells = <0x00000001>;
        model = "Gateworks Ventana i.MX6 Quad GW54XX";
        compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
        chosen {
                bootargs = "console=ttymxc1,115200";
        };
        aliases {
                gpio0 = "/soc/aips-bus@02000000/gpio@0209c000";
                gpio1 = "/soc/aips-bus@02000000/gpio@020a0000";
                gpio2 = "/soc/aips-bus@02000000/gpio@020a4000";
                gpio3 = "/soc/aips-bus@02000000/gpio@020a8000";
                gpio4 = "/soc/aips-bus@02000000/gpio@020ac000";
                gpio5 = "/soc/aips-bus@02000000/gpio@020b0000";
                gpio6 = "/soc/aips-bus@02000000/gpio@020b4000";
                i2c0 = "/soc/aips-bus@02100000/i2c@021a0000";
                i2c1 = "/soc/aips-bus@02100000/i2c@021a4000";
                i2c2 = "/soc/aips-bus@02100000/i2c@021a8000";
                serial0 =
"/soc/aips-bus@02000000/spba-bus@02000000/serial@02020000";
                serial1 = "/soc/aips-bus@02100000/serial@021e8000";
                serial4 = "/soc/aips-bus@02100000/serial@021f4000";
                can0 = "/soc/aips-bus@02000000/flexcan@02090000";
                ethernet0 = "/soc/aips-bus@02100000/ethernet@02188000";
                led0 = "/leds/user1";
                led1 = "/leds/user2";
                led2 = "/leds/user3";
                nand = "/soc/gpmi-nand@00112000";
                usb0 = "/soc/aips-bus@02100000/usb@02184200";
                usb1 = "/soc/aips-bus@02100000/usb@02184000";
                usdhc2 = "/soc/aips-bus@02100000/usdhc@02198000";
        };
        memory {
                device_type = "memory";
                reg = <0x10000000 0x40000000>;
        };
        interrupt-controller@00a01000 {
                compatible = "arm,cortex-a9-gic";
                #interrupt-cells = <0x00000003>;
                #address-cells = <0x00000001>;
                #size-cells = <0x00000001>;
                interrupt-controller;
                reg = <0x00a01000 0x00001000 0x00a00100 0x00000100>;
                linux,phandle = <0x00000001>;
                phandle = <0x00000001>;
        };
        clocks {
                #address-cells = <0x00000001>;
                #size-cells = <0x00000000>;
                ckil {
                        compatible = "fsl,imx-ckil", "fixed-clock";
                        clock-frequency = <0x00008000>;
                };
                ckih1 {
                        compatible = "fsl,imx-ckih1", "fixed-clock";
                        clock-frequency = <0x00000000>;
                };
                osc {
                        compatible = "fsl,imx-osc", "fixed-clock";
                        clock-frequency = <0x016e3600>;
                };
        };
        soc {
                #address-cells = <0x00000001>;
                #size-cells = <0x00000001>;
                compatible = "simple-bus";
                interrupt-parent = <0x00000001>;
                ranges;
                dma-apbh@00110000 {
                        compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
                        reg = <0x00110000 0x00002000>;
                        interrupts = <0x00000000 0x0000000d 0x00000004
0x00000000 0x0000000d 0x00000004 0x00000000 0x0000000d 0x00000004
0x00000000 0x0000000d 0x00000004>;
                        interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
                        #dma-cells = <0x00000001>;
                        dma-channels = <0x00000004>;
                        clocks = <0x00000002 0x0000006a>;
                        linux,phandle = <0x00000003>;
                        phandle = <0x00000003>;
                };
                gpmi-nand@00112000 {
                        compatible = "fsl,imx6q-gpmi-nand";
                        #address-cells = <0x00000001>;
                        #size-cells = <0x00000001>;
                        reg = <0x00112000 0x00002000 0x00114000 0x00002000>;
                        reg-names = "gpmi-nand", "bch";
                        interrupts = <0x00000000 0x0000000f 0x00000004>;
                        interrupt-names = "bch";
                        clocks = <0x00000002 0x00000098 0x00000002
0x00000099 0x00000002 0x00000097 0x00000002 0x00000096 0x00000002
0x00000095>;
                        clock-names = "gpmi_io", "gpmi_apb",
"gpmi_bch", "gpmi_bch_apb", "per1_bch";
                        dmas = <0x00000003 0x00000000>;
                        dma-names = "rx-tx";
                        status = "okay";
                        pinctrl-names = "default";
                        pinctrl-0 = <0x00000004>;
                        partition@0 {
                                label = "uboot";
                                reg = <0x00000000 0x01000000>;
                        };
                        partition@1000000 {
                                label = "env";
                                reg = <0x01000000 0x00100000>;
                        };
                        partition@1100000 {
                                label = "rootfs";
                                reg = <0x01100000 0x0ef00000>;
                        };
                };
                timer@00a00600 {
                        compatible = "arm,cortex-a9-twd-timer";
                        reg = <0x00a00600 0x00000020>;
                        interrupts = <0x00000001 0x0000000d 0x00000f01>;
                        clocks = <0x00000002 0x0000000f>;
                };
                l2-cache@00a02000 {
                        compatible = "arm,pl310-cache";
                        reg = <0x00a02000 0x00001000>;
                        interrupts = <0x00000000 0x0000005c 0x00000004>;
                        cache-unified;
                        cache-level = <0x00000002>;
                        arm,tag-latency = <0x00000004 0x00000002 0x00000003>;
                        arm,data-latency = <0x00000004 0x00000002 0x00000003>;
                        linux,phandle = <0x00000022>;
                        phandle = <0x00000022>;
                };
                pcie@0x01000000 {
                        compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
                        reg = <0x01ffc000 0x00004000>;
                        #address-cells = <0x00000003>;
                        #size-cells = <0x00000002>;
                        device_type = "pci";
                        ranges = * 0x18000ce0 [0x00000048];
                        num-lanes = <0x00000001>;
                        interrupts = <0x00000000 0x0000007b 0x00000004>;
                        #interrupt-cells = <0x00000001>;
                        interrupt-map-mask = <0x00000000 0x00000000
0x00000000 0x00000007>;
                        interrupt-map = * 0x18000d88 [0x00000080];
                        clocks = <0x00000002 0x000000bd 0x00000002
0x000000bb 0x00000002 0x000000ce 0x00000002 0x00000090>;
                        clock-names = "pcie_ref_125m",
"sata_ref_100m", "lvds_gate", "pcie_axi";
                        status = "okay";
                        reset-gpio = <0x00000005 0x0000001d 0x00000000>;
                };
                pmu {
                        compatible = "arm,cortex-a9-pmu";
                        interrupts = <0x00000000 0x0000005e 0x00000004>;
                };
                aips-bus@02000000 {
                        compatible = "fsl,aips-bus", "simple-bus";
                        #address-cells = <0x00000001>;
                        #size-cells = <0x00000001>;
                        reg = <0x02000000 0x00100000>;
                        ranges;
                        spba-bus@02000000 {
                                compatible = "fsl,spba-bus", "simple-bus";
                                #address-cells = <0x00000001>;
                                #size-cells = <0x00000001>;
                                reg = <0x02000000 0x00040000>;
                                ranges;
                                spdif@02004000 {
                                        compatible = "fsl,imx35-spdif";
                                        reg = <0x02004000 0x00004000>;
                                        interrupts = <0x00000000
0x00000034 0x00000004>;
                                        dmas = <0x00000006 0x0000000e
0x00000012 0x00000000 0x00000006 0x0000000f 0x00000012 0x00000000>;
                                        dma-names = "rx", "tx";
                                        clocks = * 0x18001084 [0x00000048];
                                        clock-names = "core", "rxtx0",
"rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", "rxtx7";
                                        status = "disabled";
                                };
                                serial@02020000 {
                                        compatible = "fsl,imx6q-uart",
"fsl,imx21-uart";
                                        reg = <0x02020000 0x00004000>;
                                        interrupts = <0x00000000
0x0000001a 0x00000004>;
                                        clocks = <0x00000002
0x000000a0 0x00000002 0x000000a1>;
                                        clock-names = "ipg", "per";
                                        dmas = <0x00000006 0x00000019
0x00000004 0x00000000 0x00000006 0x0000001a 0x00000004 0x00000000>;
                                        dma-names = "rx", "tx";
                                        status = "okay";
                                        pinctrl-names = "default";
                                        pinctrl-0 = <0x00000007>;
                                };
                                esai@02024000 {
                                        reg = <0x02024000 0x00004000>;
                                        interrupts = <0x00000000
0x00000033 0x00000004>;
                                };
                                ssi@0202c000 {
                                        compatible = "fsl,imx6q-ssi",
"fsl,imx21-ssi";
                                        reg = <0x0202c000 0x00004000>;
                                        interrupts = <0x00000000
0x0000002f 0x00000004>;
                                        clocks = <0x00000002 0x000000b3>;
                                        dmas = <0x00000006 0x00000029
0x00000001 0x00000000 0x00000006 0x0000002a 0x00000001 0x00000000>;
                                        dma-names = "rx", "tx";
                                        fsl,fifo-depth = <0x0000000f>;
                                        fsl,ssi-dma-events =
<0x0000002a 0x00000029>;
                                        status = "okay";
                                        fsl,mode = "i2s-slave";
                                };
                                ssi@02030000 {
                                        compatible = "fsl,imx6q-ssi",
"fsl,imx21-ssi";
                                        reg = <0x02030000 0x00004000>;
                                        interrupts = <0x00000000
0x00000030 0x00000004>;
                                        clocks = <0x00000002 0x000000b4>;
                                        dmas = <0x00000006 0x0000002d
0x00000001 0x00000000 0x00000006 0x0000002e 0x00000001 0x00000000>;
                                        dma-names = "rx", "tx";
                                        fsl,fifo-depth = <0x0000000f>;
                                        fsl,ssi-dma-events =
<0x0000002e 0x0000002d>;
                                        status = "disabled";
                                };
                                asrc@02034000 {
                                        reg = <0x02034000 0x00004000>;
                                        interrupts = <0x00000000
0x00000032 0x00000004>;
                                };
                                spba@0203c000 {
                                        reg = <0x0203c000 0x00004000>;
                                };
                                ecspi@02018000 {
                                        #address-cells = <0x00000001>;
                                        #size-cells = <0x00000000>;
                                        compatible =
"fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02018000 0x00004000>;
                                        interrupts = <0x00000000
0x00000023 0x00000004>;
                                        clocks = <0x00000002
0x00000074 0x00000002 0x00000074>;
                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
                        };
                        vpu@02040000 {
                                reg = <0x02040000 0x0003c000>;
                                interrupts = <0x00000000 0x00000003
0x00000004 0x00000000 0x0000000c 0x00000004>;
                        };
                        aipstz@0207c000 {
                                reg = <0x0207c000 0x00004000>;
                        };
                        pwm@02080000 {
                                #pwm-cells = <0x00000002>;
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x02080000 0x00004000>;
                                interrupts = <0x00000000 0x00000053 0x00000004>;
                                clocks = <0x00000002 0x0000003e
0x00000002 0x00000091>;
                                clock-names = "ipg", "per";
                        };
                        pwm@02084000 {
                                #pwm-cells = <0x00000002>;
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x02084000 0x00004000>;
                                interrupts = <0x00000000 0x00000054 0x00000004>;
                                clocks = <0x00000002 0x0000003e
0x00000002 0x00000092>;
                                clock-names = "ipg", "per";
                        };
                        pwm@02088000 {
                                #pwm-cells = <0x00000002>;
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x02088000 0x00004000>;
                                interrupts = <0x00000000 0x00000055 0x00000004>;
                                clocks = <0x00000002 0x0000003e
0x00000002 0x00000093>;
                                clock-names = "ipg", "per";
                        };
                        pwm@0208c000 {
                                #pwm-cells = <0x00000002>;
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x0208c000 0x00004000>;
                                interrupts = <0x00000000 0x00000056 0x00000004>;
                                clocks = <0x00000002 0x0000003e
0x00000002 0x00000094>;
                                clock-names = "ipg", "per";
                        };
                        flexcan@02090000 {
                                compatible = "fsl,imx6q-flexcan";
                                reg = <0x02090000 0x00004000>;
                                interrupts = <0x00000000 0x0000006e 0x00000004>;
                                clocks = <0x00000002 0x0000006c
0x00000002 0x0000006d>;
                                clock-names = "ipg", "per";
                                status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <0x00000008>;
                        };
                        flexcan@02094000 {
                                compatible = "fsl,imx6q-flexcan";
                                reg = <0x02094000 0x00004000>;
                                interrupts = <0x00000000 0x0000006f 0x00000004>;
                                clocks = <0x00000002 0x0000006e
0x00000002 0x0000006f>;
                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
                        gpt@02098000 {
                                compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
                                reg = <0x02098000 0x00004000>;
                                interrupts = <0x00000000 0x00000037 0x00000004>;
                                clocks = <0x00000002 0x00000077
0x00000002 0x00000078>;
                                clock-names = "ipg", "per";
                        };
                        gpio@0209c000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x0209c000 0x00004000>;
                                interrupts = <0x00000000 0x00000042
0x00000004 0x00000000 0x00000043 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                                linux,phandle = <0x00000005>;
                                phandle = <0x00000005>;
                        };
                        gpio@020a0000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x020a0000 0x00004000>;
                                interrupts = <0x00000000 0x00000044
0x00000004 0x00000000 0x00000045 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                        };
                        gpio@020a4000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x020a4000 0x00004000>;
                                interrupts = <0x00000000 0x00000046
0x00000004 0x00000000 0x00000047 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                                linux,phandle = <0x00000027>;
                                phandle = <0x00000027>;
                        };
                        gpio@020a8000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x020a8000 0x00004000>;
                                interrupts = <0x00000000 0x00000048
0x00000004 0x00000000 0x00000049 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                                linux,phandle = <0x00000026>;
                                phandle = <0x00000026>;
                        };
                        gpio@020ac000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x020ac000 0x00004000>;
                                interrupts = <0x00000000 0x0000004a
0x00000004 0x00000000 0x0000004b 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                        };
                        gpio@020b0000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x020b0000 0x00004000>;
                                interrupts = <0x00000000 0x0000004c
0x00000004 0x00000000 0x0000004d 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                        };
                        gpio@020b4000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
                                reg = <0x020b4000 0x00004000>;
                                interrupts = <0x00000000 0x0000004e
0x00000004 0x00000000 0x0000004f 0x00000004>;
                                gpio-controller;
                                #gpio-cells = <0x00000002>;
                                interrupt-controller;
                                #interrupt-cells = <0x00000002>;
                                linux,phandle = <0x00000018>;
                                phandle = <0x00000018>;
                        };
                        kpp@020b8000 {
                                reg = <0x020b8000 0x00004000>;
                                interrupts = <0x00000000 0x00000052 0x00000004>;
                        };
                        wdog@020bc000 {
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020bc000 0x00004000>;
                                interrupts = <0x00000000 0x00000050 0x00000004>;
                                clocks = <0x00000002 0x00000000>;
                        };
                        wdog@020c0000 {
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020c0000 0x00004000>;
                                interrupts = <0x00000000 0x00000051 0x00000004>;
                                clocks = <0x00000002 0x00000000>;
                                status = "disabled";
                        };
                        ccm@020c4000 {
                                compatible = "fsl,imx6q-ccm";
                                reg = <0x020c4000 0x00004000>;
                                interrupts = <0x00000000 0x00000057
0x00000004 0x00000000 0x00000058 0x00000004>;
                                #clock-cells = <0x00000001>;
                                linux,phandle = <0x00000002>;
                                phandle = <0x00000002>;
                        };
                        anatop@020c8000 {
                                compatible = "fsl,imx6q-anatop",
"syscon", "simple-bus";
                                reg = <0x020c8000 0x00001000>;
                                interrupts = <0x00000000 0x00000031
0x00000004 0x00000000 0x00000036 0x00000004 0x00000000 0x0000007f
0x00000004>;
                                linux,phandle = <0x00000009>;
                                phandle = <0x00000009>;
                                regulator-1p1@110 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vdd1p1";
                                        regulator-min-microvolt = "", "5";
                                        regulator-max-microvolt = <0x0014fb18>;
                                        regulator-always-on;
                                        anatop-reg-offset = <0x00000110>;
                                        anatop-vol-bit-shift = <0x00000008>;
                                        anatop-vol-bit-width = <0x00000005>;
                                        anatop-min-bit-val = <0x00000004>;
                                        anatop-min-voltage = "", "5";
                                        anatop-max-voltage = <0x0014fb18>;
                                };
                                regulator-3p0@120 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vdd3p0";
                                        regulator-min-microvolt = <0x002ab980>;
                                        regulator-max-microvolt = <0x003010b0>;
                                        regulator-always-on;
                                        anatop-reg-offset = <0x00000120>;
                                        anatop-vol-bit-shift = <0x00000008>;
                                        anatop-vol-bit-width = <0x00000005>;
                                        anatop-min-bit-val = <0x00000000>;
                                        anatop-min-voltage = <0x00280de8>;
                                        anatop-max-voltage = <0x0033e140>;
                                };
                                regulator-2p5@130 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vdd2p5";
                                        regulator-min-microvolt = <0x001e8480>;
                                        regulator-max-microvolt = <0x0029f630>;
                                        regulator-always-on;
                                        anatop-reg-offset = <0x00000130>;
                                        anatop-vol-bit-shift = <0x00000008>;
                                        anatop-vol-bit-width = <0x00000005>;
                                        anatop-min-bit-val = <0x00000000>;
                                        anatop-min-voltage = <0x001e8480>;
                                        anatop-max-voltage = <0x0029f630>;
                                };
                                regulator-vddcore@140 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "cpu";
                                        regulator-min-microvolt = <0x000b1008>;
                                        regulator-max-microvolt = <0x00162010>;
                                        regulator-always-on;
                                        anatop-reg-offset = <0x00000140>;
                                        anatop-vol-bit-shift = <0x00000000>;
                                        anatop-vol-bit-width = <0x00000005>;
                                        anatop-delay-reg-offset = <0x00000170>;
                                        anatop-delay-bit-shift = <0x00000018>;
                                        anatop-delay-bit-width = <0x00000002>;
                                        anatop-min-bit-val = <0x00000001>;
                                        anatop-min-voltage = <0x000b1008>;
                                        anatop-max-voltage = <0x00162010>;
                                        linux,phandle = <0x00000023>;
                                        phandle = <0x00000023>;
                                };
                                regulator-vddpu@140 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vddpu";
                                        regulator-min-microvolt = <0x000b1008>;
                                        regulator-max-microvolt = <0x00162010>;
                                        regulator-always-on;
                                        anatop-reg-offset = <0x00000140>;
                                        anatop-vol-bit-shift = <0x00000009>;
                                        anatop-vol-bit-width = <0x00000005>;
                                        anatop-delay-reg-offset = <0x00000170>;
                                        anatop-delay-bit-shift = <0x0000001a>;
                                        anatop-delay-bit-width = <0x00000002>;
                                        anatop-min-bit-val = <0x00000001>;
                                        anatop-min-voltage = <0x000b1008>;
                                        anatop-max-voltage = <0x00162010>;
                                        linux,phandle = <0x00000024>;
                                        phandle = <0x00000024>;
                                };
                                regulator-vddsoc@140 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vddsoc";
                                        regulator-min-microvolt = <0x000b1008>;
                                        regulator-max-microvolt = <0x00162010>;
                                        regulator-always-on;
                                        anatop-reg-offset = <0x00000140>;
                                        anatop-vol-bit-shift = <0x00000012>;
                                        anatop-vol-bit-width = <0x00000005>;
                                        anatop-delay-reg-offset = <0x00000170>;
                                        anatop-delay-bit-shift = <0x0000001c>;
                                        anatop-delay-bit-width = <0x00000002>;
                                        anatop-min-bit-val = <0x00000001>;
                                        anatop-min-voltage = <0x000b1008>;
                                        anatop-max-voltage = <0x00162010>;
                                        linux,phandle = <0x00000025>;
                                        phandle = <0x00000025>;
                                };
                        };
                        tempmon {
                                compatible = "fsl,imx6q-tempmon";
                                interrupts = <0x00000000 0x00000031 0x00000004>;
                                fsl,tempmon = <0x00000009>;
                                fsl,tempmon-data = <0x0000000a>;
                        };
                        usbphy@020c9000 {
                                compatible = "fsl,imx6q-usbphy",
"fsl,imx23-usbphy";
                                reg = <0x020c9000 0x00001000>;
                                interrupts = <0x00000000 0x0000002c 0x00000004>;
                                clocks = <0x00000002 0x000000b6>;
                                linux,phandle = <0x00000010>;
                                phandle = <0x00000010>;
                        };
                        usbphy@020ca000 {
                                compatible = "fsl,imx6q-usbphy",
"fsl,imx23-usbphy";
                                reg = <0x020ca000 0x00001000>;
                                interrupts = <0x00000000 0x0000002d 0x00000004>;
                                clocks = <0x00000002 0x000000b7>;
                                linux,phandle = <0x00000014>;
                                phandle = <0x00000014>;
                        };
                        snvs@020cc000 {
                                compatible = "fsl,sec-v4.0-mon", "simple-bus";
                                #address-cells = <0x00000001>;
                                #size-cells = <0x00000001>;
                                ranges = <0x00000000 0x020cc000 0x00004000>;
                                snvs-rtc-lp@34 {
                                        compatible = "fsl,sec-v4.0-mon-rtc-lp";
                                        reg = <0x00000034 0x00000058>;
                                        interrupts = <0x00000000
0x00000013 0x00000004 0x00000000 0x00000014 0x00000004>;
                                };
                        };
                        epit@020d0000 {
                                reg = <0x020d0000 0x00004000>;
                                interrupts = <0x00000000 0x00000038 0x00000004>;
                        };
                        epit@020d4000 {
                                reg = <0x020d4000 0x00004000>;
                                interrupts = <0x00000000 0x00000039 0x00000004>;
                        };
                        src@020d8000 {
                                compatible = "fsl,imx6q-src", "fsl,imx51-src";
                                reg = <0x020d8000 0x00004000>;
                                interrupts = <0x00000000 0x0000005b
0x00000004 0x00000000 0x00000060 0x00000004>;
                                #reset-cells = <0x00000001>;
                                linux,phandle = <0x00000021>;
                                phandle = <0x00000021>;
                        };
                        gpc@020dc000 {
                                compatible = "fsl,imx6q-gpc";
                                reg = <0x020dc000 0x00004000>;
                                interrupts = <0x00000000 0x00000059
0x00000004 0x00000000 0x0000005a 0x00000004>;
                        };
                        iomuxc-gpr@020e0000 {
                                compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
                                reg = <0x020e0000 0x00000038>;
                                linux,phandle = <0x0000000c>;
                                phandle = <0x0000000c>;
                        };
                        iomuxc@020e0000 {
                                compatible = "fsl,imx6q-iomuxc";
                                reg = <0x020e0000 0x00004000>;
                                pinctrl-names = "default";
                                pinctrl-0 = <0x0000000b>;
                                audmux {
                                        audmux-1 {
                                                fsl,pins = *
0x18002eb8 [0x00000060];
                                                linux,phandle = <0x0000001e>;
                                                phandle = <0x0000001e>;
                                        };
                                        audmux-2 {
                                                fsl,pins = *
0x18002f58 [0x00000060];
                                        };
                                        audmux-3 {
                                                fsl,pins = *
0x18002fd8 [0x00000048];
                                        };
                                        audmux-4 {
                                                fsl,pins = *
0x18003040 [0x00000048];
                                        };
                                };
                                ecspi1 {
                                        ecspi1grp-1 {
                                                fsl,pins = *
0x180030b8 [0x00000048];
                                        };
                                        ecspi1grp-2 {
                                                fsl,pins = *
0x18003120 [0x00000048];
                                        };
                                };
                                ecspi3 {
                                        ecspi3grp-1 {
                                                fsl,pins = *
0x18003198 [0x00000048];
                                        };
                                };
                                enet {
                                        enetgrp-1 {
                                                fsl,pins = *
0x18003210 [0x00000180];
                                                linux,phandle = <0x00000016>;
                                                phandle = <0x00000016>;
                                        };
                                        enetgrp-2 {
                                                fsl,pins = *
0x180033d0 [0x00000168];
                                        };
                                        enetgrp-3 {
                                                fsl,pins = *
0x18003558 [0x00000180];
                                        };
                                };
                                esai {
                                        esaigrp-1 {
                                                fsl,pins = *
0x18003708 [0x000000d8];
                                        };
                                        esaigrp-2 {
                                                fsl,pins = *
0x18003800 [0x000000f0];
                                        };
                                };
                                flexcan1 {
                                        flexcan1grp-1 {
                                                fsl,pins = <0x0000020c
0x000005dc 0x000007e4 0x00000002 0x00000000 0x80000000 0x00000208
0x000005d8 0x00000000 0x00000002 0x00000000 0x80000000>;
                                                linux,phandle = <0x00000008>;
                                                phandle = <0x00000008>;
                                        };
                                        flexcan1grp-2 {
                                                fsl,pins = <0x00000240
0x00000610 0x00000000 0x00000003 0x00000000 0x80000000 0x0000020c
0x000005dc 0x000007e4 0x00000002 0x00000000 0x80000000>;
                                        };
                                };
                                flexcan2 {
                                        flexcan2grp-1 {
                                                fsl,pins = <0x00000218
0x000005e8 0x00000000 0x00000000 0x00000000 0x80000000 0x0000021c
0x000005ec 0x000007e8 0x00000000 0x00000000 0x80000000>;
                                        };
                                };
                                gpmi-nand {
                                        gpmi-nand-1 {
                                                fsl,pins = *
0x18003a68 [0x00000198];
                                        };
                                        gpmi-nand-2 {
                                                fsl,pins = *
0x18003c20 [0x00000180];
                                                linux,phandle = <0x00000004>;
                                                phandle = <0x00000004>;
                                        };
                                };
                                hdmi_hdcp {
                                        hdmihdcpgrp-1 {
                                                fsl,pins = <0x00000210
0x000005e0 0x00000890 0x00000002 0x00000001 0x4001b8b1 0x00000214
0x000005e4 0x00000894 0x00000002 0x00000001 0x4001b8b1>;
                                        };
                                        hdmihdcpgrp-2 {
                                                fsl,pins = <0x0000008c
0x000003a0 0x00000890 0x00000004 0x00000000 0x4001b8b1 0x00000090
0x000003a4 0x00000894 0x00000004 0x00000000 0x4001b8b1>;
                                        };
                                        hdmihdcpgrp-3 {
                                                fsl,pins = <0x0000008c
0x000003a0 0x00000890 0x00000004 0x00000000 0x4001b8b1 0x00000214
0x000005e4 0x00000894 0x00000002 0x00000001 0x4001b8b1>;
                                        };
                                };
                                hdmi_cec {
                                        hdmicecgrp-1 {
                                                fsl,pins = <0x00000088
0x0000039c 0x0000088c 0x00000006 0x00000000 0x0001f8b0>;
                                        };
                                        hdmicecgrp-2 {
                                                fsl,pins = <0x0000020c
0x000005dc 0x0000088c 0x00000006 0x00000001 0x0001f8b0>;
                                        };
                                };
                                i2c1 {
                                        i2c1grp-1 {
                                                fsl,pins = <0x000000a4
0x000003b8 0x00000898 0x00000006 0x00000000 0x4001b8b1 0x000000c4
0x000003d8 0x0000089c 0x00000001 0x00000000 0x4001b8b1>;
                                                linux,phandle = <0x0000001a>;
                                                phandle = <0x0000001a>;
                                        };
                                        i2c1grp-2 {
                                                fsl,pins = <0x00000278
0x00000648 0x0000089c 0x00000004 0x00000001 0x4001b8b1 0x0000027c
0x0000064c 0x00000898 0x00000004 0x00000001 0x4001b8b1>;
                                        };
                                };
                                i2c2 {
                                        i2c2grp-1 {
                                                fsl,pins = <0x0000008c
0x000003a0 0x000008a0 0x00000006 0x00000000 0x4001b8b1 0x00000090
0x000003a4 0x000008a4 0x00000006 0x00000000 0x4001b8b1>;
                                        };
                                        i2c2grp-2 {
                                                fsl,pins = <0x00000210
0x000005e0 0x000008a0 0x00000004 0x00000001 0x4001b8b1 0x00000214
0x000005e4 0x000008a4 0x00000004 0x00000001 0x4001b8b1>;
                                                linux,phandle = <0x0000001b>;
                                                phandle = <0x0000001b>;
                                        };
                                        i2c2grp-3 {
                                                fsl,pins = <0x0000008c
0x000003a0 0x000008a0 0x00000006 0x00000000 0x4001b8b1 0x00000214
0x000005e4 0x000008a4 0x00000004 0x00000001 0x4001b8b1>;
                                        };
                                };
                                i2c3 {
                                        i2c3grp-1 {
                                                fsl,pins = <0x00000094
0x000003a8 0x000008a8 0x00000006 0x00000000 0x4001b8b1 0x00000098
0x000003ac 0x000008ac 0x00000006 0x00000000 0x4001b8b1>;
                                        };
                                        i2c3grp-2 {
                                                fsl,pins = <0x0000022c
0x000005fc 0x000008a8 0x00000002 0x00000001 0x4001b8b1 0x00000230
0x00000600 0x000008ac 0x00000002 0x00000001 0x4001b8b1>;
                                                linux,phandle = <0x0000001c>;
                                                phandle = <0x0000001c>;
                                        };
                                        i2c3grp-3 {
                                                fsl,pins = <0x0000023c
0x0000060c 0x000008a8 0x00000006 0x00000002 0x4001b8b1 0x00000248
0x00000618 0x000008ac 0x00000006 0x00000002 0x4001b8b1>;
                                        };
                                        i2c3grp-4 {
                                                fsl,pins = <0x0000022c
0x000005fc 0x000008a8 0x00000002 0x00000001 0x4001b8b1 0x00000098
0x000003ac 0x000008ac 0x00000006 0x00000000 0x4001b8b1>;
                                        };
                                };
                                ipu1 {
                                        ipu1grp-1 {
                                                fsl,pins = *
0x180042ec [0x000002b8];
                                        };
                                        ipu1grp-2 {
                                                fsl,pins = *
0x180045c4 [0x00000120];
                                        };
                                        ipu1grp-3 {
                                                fsl,pins = *
0x18004704 [0x000001c8];
                                        };
                                };
                                mlb {
                                        mlbgrp-1 {
                                                fsl,pins = *
0x180048f8 [0x00000048];
                                        };
                                        mlbgrp-2 {
                                                fsl,pins = *
0x18004960 [0x00000048];
                                        };
                                };
                                pwm0 {
                                        pwm0grp-1 {
                                                fsl,pins = <0x00000344
0x0000072c 0x00000000 0x00000003 0x00000000 0x0001b0b1>;
                                        };
                                };
                                pwm3 {
                                        pwm3grp-1 {
                                                fsl,pins = <0x00000320
0x00000708 0x00000000 0x00000002 0x00000000 0x0001b0b1>;
                                        };
                                };
                                spdif {
                                        spdifgrp-1 {
                                                fsl,pins = <0x00000210
0x000005e0 0x00000914 0x00000006 0x00000002 0x0001b0b0>;
                                        };
                                        spdifgrp-2 {
                                                fsl,pins = <0x00000248
0x00000618 0x00000914 0x00000004 0x00000003 0x0001b0b0 0x0000024c
0x0000061c 0x00000000 0x00000004 0x00000000 0x0001b0b0>;
                                        };
                                        spdifgrp-3 {
                                                fsl,pins = <0x000001e4
0x000004f8 0x00000000 0x00000003 0x00000000 0x0001b0b0>;
                                        };
                                };
                                uart1 {
                                        uart1grp-1 {
                                                fsl,pins = <0x00000280
0x00000650 0x00000000 0x00000003 0x00000000 0x0001b0b1 0x00000284
0x00000654 0x00000920 0x00000003 0x00000001 0x0001b0b1>;
                                        };
                                        uart1grp-2 {
                                                fsl,pins = <0x000002a8
0x00000690 0x00000000 0x00000001 0x00000000 0x0001b0b1 0x000002ac
0x00000694 0x00000920 0x00000001 0x00000003 0x0001b0b1>;
                                                linux,phandle = <0x00000007>;
                                                phandle = <0x00000007>;
                                        };
                                };
                                uart2 {
                                        uart2grp-1 {
                                                fsl,pins = <0x000000bc
0x000003d0 0x00000000 0x00000004 0x00000000 0x0001b0b1 0x000000c0
0x000003d4 0x00000928 0x00000004 0x00000001 0x0001b0b1>;
                                        };
                                        uart2grp-2 {
                                                fsl,pins = *
0x18004c58 [0x00000060];
                                        };
                                        uart2grp-3 {
                                                fsl,pins = <0x00000338
0x00000720 0x00000000 0x00000002 0x00000000 0x0001b0b1 0x0000032c
0x00000714 0x00000928 0x00000002 0x00000006 0x0001b0b1>;
                                                linux,phandle = <0x0000001f>;
                                                phandle = <0x0000001f>;
                                        };
                                };
                                uart3 {
                                        uart3grp-1 {
                                                fsl,pins = *
0x18004d58 [0x00000060];
                                        };
                                        uart3grp-2 {
                                                fsl,pins = *
0x18004dd8 [0x00000060];
                                        };
                                        uart3grp-3 {
                                                fsl,pins = <0x000000b4
0x000003c8 0x00000000 0x00000002 0x00000000 0x0001b0b1 0x000000b8
0x000003cc 0x00000930 0x00000002 0x00000001 0x0001b0b1>;
                                        };
                                };
                                uart4 {
                                        uart4grp-1 {
                                                fsl,pins = <0x000001f8
0x000005c8 0x00000000 0x00000004 0x00000000 0x0001b0b1 0x000001fc
0x000005cc 0x00000938 0x00000004 0x00000001 0x0001b0b1>;
                                        };
                                };
                                uart5 {
                                        uart5grp-1 {
                                                fsl,pins = <0x00000200
0x000005d0 0x00000000 0x00000004 0x00000000 0x0001b0b1 0x00000204
0x000005d4 0x00000940 0x00000004 0x00000001 0x0001b0b1>;
                                                linux,phandle = <0x00000020>;
                                                phandle = <0x00000020>;
                                        };
                                };
                                usbotg {
                                        usbotggrp-1 {
                                                fsl,pins = <0x00000224
0x000005f4 0x00000004 0x00000003 0xff0d0101 0x00017059>;
                                                linux,phandle = <0x00000013>;
                                                phandle = <0x00000013>;
                                        };
                                        usbotggrp-2 {
                                                fsl,pins = <0x000001d8
0x000004ec 0x00000004 0x00000000 0xff0d0100 0x00017059>;
                                        };
                                };
                                usbh2 {
                                        usbh2grp-1 {
                                                fsl,pins = <0x00000058
0x0000036c 0x00000000 0x00000000 0x00000000 0x40013030 0x00000074
0x00000388 0x00000000 0x00000000 0x00000000 0x40013030>;
                                        };
                                        usbh2grp-2 {
                                                fsl,pins = <0x00000074
0x00000388 0x00000000 0x00000000 0x00000000 0x40017030>;
                                        };
                                };
                                usbh3 {
                                        usbh3grp-1 {
                                                fsl,pins = <0x0000006c
0x00000380 0x00000000 0x00000000 0x00000000 0x40013030 0x00000084
0x00000398 0x00000000 0x00000000 0x00000000 0x40013030>;
                                        };
                                        usbh3grp-2 {
                                                fsl,pins = <0x00000084
0x00000398 0x00000000 0x00000000 0x00000000 0x40017030>;
                                        };
                                };
                                usdhc1 {
                                        usdhc1grp-1 {
                                                fsl,pins = *
0x18005168 [0x000000f0];
                                        };
                                        usdhc1grp-2 {
                                                fsl,pins = *
0x18005278 [0x00000090];
                                        };
                                };
                                usdhc2 {
                                        usdhc2grp-1 {
                                                fsl,pins = *
0x18005338 [0x000000f0];
                                        };
                                        usdhc2grp-2 {
                                                fsl,pins = *
0x18005448 [0x00000090];
                                        };
                                };
                                usdhc3 {
                                        usdhc3grp-1 {
                                                fsl,pins = *
0x18005508 [0x000000f0];
                                        };
                                        usdhc3grp-1-100mhz {
                                                fsl,pins = *
0x18005620 [0x000000f0];
                                        };
                                        usdhc3grp-1-200mhz {
                                                fsl,pins = *
0x18005738 [0x000000f0];
                                        };
                                        usdhc3grp-2 {
                                                fsl,pins = *
0x18005848 [0x00000090];
                                                linux,phandle = <0x00000017>;
                                                phandle = <0x00000017>;
                                        };
                                };
                                usdhc4 {
                                        usdhc4grp-1 {
                                                fsl,pins = *
0x18005928 [0x000000f0];
                                        };
                                        usdhc4grp-2 {
                                                fsl,pins = *
0x18005a38 [0x00000090];
                                        };
                                };
                                weim {
                                        weim_cs0grp-1 {
                                                fsl,pins = <0x000000f8
0x0000040c 0x00000000 0x00000000 0x00000000 0x0000b0b1>;
                                        };
                                        weim_norgrp-1 {
                                                fsl,pins = *
0x18005b38 [0x00000408];
                                        };
                                };
                                ipu2 {
                                        ipu2grp-1 {
                                                fsl,pins = *
0x18005f70 [0x000002b8];
                                        };
                                };
                                hog {
                                        hoggrp {
                                                fsl,pins = *
0x18006250 [0x00000138];
                                                linux,phandle = <0x0000000b>;
                                                phandle = <0x0000000b>;
                                        };
                                };
                        };
                        ldb@020e0008 {
                                #address-cells = <0x00000001>;
                                #size-cells = <0x00000000>;
                                compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
                                gpr = <0x0000000c>;
                                status = "okay";
                                clocks = <0x00000002 0x00000021
0x00000002 0x00000022 0x00000002 0x00000027 0x00000002 0x00000028
0x00000002 0x00000029 0x00000002 0x0000002a 0x00000002 0x00000087
0x00000002 0x00000088>;
                                clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel", "di2_sel", "di3_sel", "di0", "di1";
                                lvds-channel@0 {
                                        reg = <0x00000000>;
                                        status = "disabled";
                                        crtcs = <0x0000000d 0x00000000
0x0000000d 0x00000001 0x0000000e 0x00000000 0x0000000e 0x00000001>;
                                };
                                lvds-channel@1 {
                                        reg = <0x00000001>;
                                        status = "okay";
                                        crtcs = <0x0000000d 0x00000000
0x0000000d 0x00000001 0x0000000e 0x00000000 0x0000000e 0x00000001>;
                                        fsl,data-mapping = "spwg";
                                        fsl,data-width = <0x00000012>;
                                        display-timings {
                                                native-mode = <0x0000000f>;
                                                hsd100pxn1 {

clock-frequency = <0x03dfd240>;
                                                        hactive = <0x00000400>;
                                                        vactive = <0x00000300>;
                                                        hback-porch =
<0x000000dc>;
                                                        hfront-porch =
<0x00000028>;
                                                        vback-porch =
<0x00000015>;
                                                        vfront-porch =
<0x00000007>;
                                                        hsync-len =
<0x0000003c>;
                                                        vsync-len =
<0x0000000a>;
                                                        linux,phandle
= <0x0000000f>;
                                                        phandle = <0x0000000f>;
                                                };
                                        };
                                };
                        };
                        dcic@020e4000 {
                                reg = <0x020e4000 0x00004000>;
                                interrupts = <0x00000000 0x0000007c 0x00000004>;
                        };
                        dcic@020e8000 {
                                reg = <0x020e8000 0x00004000>;
                                interrupts = <0x00000000 0x0000007d 0x00000004>;
                        };
                        sdma@020ec000 {
                                compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
                                reg = <0x020ec000 0x00004000>;
                                interrupts = <0x00000000 0x00000002 0x00000004>;
                                clocks = <0x00000002 0x0000009b
0x00000002 0x0000009b>;
                                clock-names = "ipg", "ahb";
                                #dma-cells = <0x00000003>;
                                fsl,sdma-ram-script-name =
"imx/sdma/sdma-imx6q.bin";
                                linux,phandle = <0x00000006>;
                                phandle = <0x00000006>;
                        };
                };
                aips-bus@02100000 {
                        compatible = "fsl,aips-bus", "simple-bus";
                        #address-cells = <0x00000001>;
                        #size-cells = <0x00000001>;
                        reg = <0x02100000 0x00100000>;
                        ranges;
                        caam@02100000 {
                                reg = <0x02100000 0x00040000>;
                                interrupts = <0x00000000 0x00000069
0x00000004 0x00000000 0x0000006a 0x00000004>;
                        };
                        aipstz@0217c000 {
                                reg = <0x0217c000 0x00004000>;
                        };
                        usb@02184000 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184000 0x00000200>;
                                interrupts = <0x00000000 0x0000002b 0x00000004>;
                                clocks = <0x00000002 0x000000a2>;
                                fsl,usbphy = <0x00000010>;
                                fsl,usbmisc = <0x00000011 0x00000000>;
                                status = "okay";
                                vbus-supply = <0x00000012>;
                                pinctrl-names = "default";
                                pinctrl-0 = <0x00000013>;
                                disable-over-current;
                        };
                        usb@02184200 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184200 0x00000200>;
                                interrupts = <0x00000000 0x00000028 0x00000004>;
                                clocks = <0x00000002 0x000000a2>;
                                fsl,usbphy = <0x00000014>;
                                fsl,usbmisc = <0x00000011 0x00000001>;
                                status = "okay";
                                vbus-supply = <0x00000015>;
                        };
                        usb@02184400 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184400 0x00000200>;
                                interrupts = <0x00000000 0x00000029 0x00000004>;
                                clocks = <0x00000002 0x000000a2>;
                                fsl,usbmisc = <0x00000011 0x00000002>;
                                status = "disabled";
                        };
                        usb@02184600 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184600 0x00000200>;
                                interrupts = <0x00000000 0x0000002a 0x00000004>;
                                clocks = <0x00000002 0x000000a2>;
                                fsl,usbmisc = <0x00000011 0x00000003>;
                                status = "disabled";
                        };
                        usbmisc@02184800 {
                                #index-cells = <0x00000001>;
                                compatible = "fsl,imx6q-usbmisc";
                                reg = <0x02184800 0x00000200>;
                                clocks = <0x00000002 0x000000a2>;
                                linux,phandle = <0x00000011>;
                                phandle = <0x00000011>;
                        };
                        ethernet@02188000 {
                                compatible = "fsl,imx6q-fec";
                                reg = <0x02188000 0x00004000>;
                                interrupts = <0x00000000 0x00000076
0x00000004 0x00000000 0x00000077 0x00000004>;
                                clocks = <0x00000002 0x00000075
0x00000002 0x00000075 0x00000002 0x000000be>;
                                clock-names = "ipg", "ahb", "ptp";
                                status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <0x00000016>;
                                phy-mode = "rgmii";
                                phy-reset-gpios = <0x00000005
0x0000001e 0x00000000>;
                        };
                        mlb@0218c000 {
                                reg = <0x0218c000 0x00004000>;
                                interrupts = <0x00000000 0x00000035
0x00000004 0x00000000 0x00000075 0x00000004 0x00000000 0x0000007e
0x00000004>;
                        };
                        usdhc@02190000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02190000 0x00004000>;
                                interrupts = <0x00000000 0x00000016 0x00000004>;
                                clocks = <0x00000002 0x000000a3
0x00000002 0x000000a3 0x00000002 0x000000a3>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <0x00000004>;
                                status = "disabled";
                        };
                        usdhc@02194000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02194000 0x00004000>;
                                interrupts = <0x00000000 0x00000017 0x00000004>;
                                clocks = <0x00000002 0x000000a4
0x00000002 0x000000a4 0x00000002 0x000000a4>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <0x00000004>;
                                status = "disabled";
                        };
                        usdhc@02198000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02198000 0x00004000>;
                                interrupts = <0x00000000 0x00000018 0x00000004>;
                                clocks = <0x00000002 0x000000a5
0x00000002 0x000000a5 0x00000002 0x000000a5>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <0x00000004>;
                                status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <0x00000017>;
                                cd-gpios = <0x00000018 0x00000000 0x00000000>;
                                vmmc-supply = <0x00000019>;
                        };
                        usdhc@0219c000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x0219c000 0x00004000>;
                                interrupts = <0x00000000 0x00000019 0x00000004>;
                                clocks = <0x00000002 0x000000a6
0x00000002 0x000000a6 0x00000002 0x000000a6>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <0x00000004>;
                                status = "disabled";
                        };
                        i2c@021a0000 {
                                #address-cells = <0x00000001>;
                                #size-cells = <0x00000000>;
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021a0000 0x00004000>;
                                interrupts = <0x00000000 0x00000024 0x00000004>;
                                clocks = <0x00000002 0x0000007d>;
                                status = "okay";
                                clock-frequency = <0x000186a0>;
                                pinctrl-names = "default";
                                pinctrl-0 = <0x0000001a>;
                                eeprom@50 {
                                        compatible = "atmel,24c02";
                                        reg = <0x00000050>;
                                        pagesize = <0x00000010>;
                                };
                                eeprom@51 {
                                        compatible = "atmel,24c02";
                                        reg = <0x00000051>;
                                        pagesize = <0x00000010>;
                                };
                                eeprom@52 {
                                        compatible = "atmel,24c02";
                                        reg = <0x00000052>;
                                        pagesize = <0x00000010>;
                                };
                                eeprom@53 {
                                        compatible = "atmel,24c02";
                                        reg = <0x00000053>;
                                        pagesize = <0x00000010>;
                                };
                                pca9555@23 {
                                        compatible = "nxp,pca9555";
                                        reg = <0x00000023>;
                                        gpio-controller;
                                        #gpio-cells = <0x00000002>;
                                };
                                gsc@29 {
                                        compatible = "gw,gsp";
                                        reg = <0x00000029>;
                                };
                                ds1672@68 {
                                        compatible = "dallas,ds1672";
                                        reg = <0x00000068>;
                                };
                        };
                        i2c@021a4000 {
                                #address-cells = <0x00000001>;
                                #size-cells = <0x00000000>;
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021a4000 0x00004000>;
                                interrupts = <0x00000000 0x00000025 0x00000004>;
                                clocks = <0x00000002 0x0000007e>;
                                status = "okay";
                                clock-frequency = <0x000186a0>;
                                pinctrl-names = "default";
                                pinctrl-0 = <0x0000001b>;
                                pfuze100@08 {
                                        compatible = "fsl,pfuze100";
                                        reg = <0x00000008>;
                                        regulators {
                                                sw1ab {

regulator-min-microvolt = <0x000493e0>;

regulator-max-microvolt = <0x001c9c38>;
                                                        regulator-boot-on;
                                                        regulator-always-on;

regulator-ramp-delay = <0x0000186a>;
                                                };
                                                sw1c {

regulator-min-microvolt = <0x000493e0>;

regulator-max-microvolt = <0x001c9c38>;
                                                        regulator-boot-on;
                                                        regulator-always-on;

regulator-ramp-delay = <0x0000186a>;
                                                };
                                                sw2 {

regulator-min-microvolt = "", "5";

regulator-max-microvolt = <0x003c45b0>;
                                                        regulator-boot-on;
                                                        regulator-always-on;
                                                };
                                                sw3a {

regulator-min-microvolt = <0x00061a80>;

regulator-max-microvolt = <0x001e22d8>;
                                                        regulator-boot-on;
                                                        regulator-always-on;
                                                };
                                                sw3b {

regulator-min-microvolt = <0x00061a80>;

regulator-max-microvolt = <0x001e22d8>;
                                                        regulator-boot-on;
                                                        regulator-always-on;
                                                };
                                                sw4 {

regulator-min-microvolt = "", "5";

regulator-max-microvolt = <0x00325aa0>;
                                                        linux,phandle
= <0x0000001d>;
                                                        phandle = <0x0000001d>;
                                                };
                                                swbst {

regulator-min-microvolt = <0x004c4b40>;

regulator-max-microvolt = <0x004e9530>;
                                                };
                                                vsnvs {

regulator-min-microvolt = <0x000f4240>;

regulator-max-microvolt = <0x002dc6c0>;
                                                        regulator-boot-on;
                                                        regulator-always-on;
                                                };
                                                vrefddr {
                                                        regulator-boot-on;
                                                        regulator-always-on;
                                                };
                                                vgen1 {

regulator-min-microvolt = "", "5";

regulator-max-microvolt = <0x0017a6b0>;
                                                };
                                                vgen2 {

regulator-min-microvolt = "", "5";

regulator-max-microvolt = <0x0017a6b0>;
                                                };
                                                vgen3 {

regulator-min-microvolt = <0x001b7740>;

regulator-max-microvolt = <0x00325aa0>;
                                                };
                                                vgen4 {

regulator-min-microvolt = <0x001b7740>;

regulator-max-microvolt = <0x00325aa0>;
                                                        regulator-always-on;
                                                };
                                                vgen5 {

regulator-min-microvolt = <0x001b7740>;

regulator-max-microvolt = <0x00325aa0>;
                                                        regulator-always-on;
                                                };
                                                vgen6 {

regulator-min-microvolt = <0x001b7740>;

regulator-max-microvolt = <0x00325aa0>;
                                                        regulator-always-on;
                                                };
                                        };
                                };
                                pex8609@3f {
                                        compatible = "plx,pex8609";
                                        reg = <0x0000003f>;
                                };
                                si52147@6b {
                                        compatible = "sil,si52147";
                                        reg = <0x0000006b>;
                                };
                        };
                        i2c@021a8000 {
                                #address-cells = <0x00000001>;
                                #size-cells = <0x00000000>;
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021a8000 0x00004000>;
                                interrupts = <0x00000000 0x00000026 0x00000004>;
                                clocks = <0x00000002 0x0000007f>;
                                status = "okay";
                                clock-frequency = <0x000186a0>;
                                pinctrl-names = "default";
                                pinctrl-0 = <0x0000001c>;
                                fxos8700@1e {
                                        compatible = "fsl,fxos8700";
                                        reg = <0x0000001e>;
                                };
                                sgtl5000@0a {
                                        compatible = "fsl,sgtl5000";
                                        reg = <0x0000000a>;
                                        clocks = <0x00000002 0x000000c9>;
                                        VDDA-supply = <0x0000001d>;
                                        VDDIO-supply = <0x00000019>;
                                        linux,phandle = <0x00000029>;
                                        phandle = <0x00000029>;
                                };
                                adv7611@4c {
                                        compatible = "adi,adv7611";
                                        reg = <0x0000004c>;
                                };
                                egalax_ts@04 {
                                        compatible = "eeti,egalax_ts";
                                        reg = <0x00000004>;
                                        interrupt-parent = <0x00000018>;
                                        interrupts = <0x0000000c 0x00000002>;
                                        wakeup-gpios = <0x00000018
0x0000000c 0x00000000>;
                                };
                                adv7393@2a {
                                        compatible = "adi,adv7393";
                                        reg = <0x0000002a>;
                                };
                                adv7180@20 {
                                        compatible = "adi,adv7180";
                                        reg = <0x00000020>;
                                };
                        };
                        romcp@021ac000 {
                                reg = <0x021ac000 0x00004000>;
                        };
                        mmdc@021b0000 {
                                compatible = "fsl,imx6q-mmdc";
                                reg = <0x021b0000 0x00004000>;
                        };
                        mmdc@021b4000 {
                                reg = <0x021b4000 0x00004000>;
                        };
                        weim@021b8000 {
                                compatible = "fsl,imx6q-weim";
                                reg = <0x021b8000 0x00004000>;
                                interrupts = <0x00000000 0x0000000e 0x00000004>;
                                clocks = <0x00000002 0x000000c4>;
                        };
                        ocotp@021bc000 {
                                compatible = "fsl,imx6q-ocotp", "syscon";
                                reg = <0x021bc000 0x00004000>;
                                linux,phandle = <0x0000000a>;
                                phandle = <0x0000000a>;
                        };
                        tzasc@021d0000 {
                                reg = <0x021d0000 0x00004000>;
                                interrupts = <0x00000000 0x0000006c 0x00000004>;
                        };
                        tzasc@021d4000 {
                                reg = <0x021d4000 0x00004000>;
                                interrupts = <0x00000000 0x0000006d 0x00000004>;
                        };
                        audmux@021d8000 {
                                compatible = "fsl,imx6q-audmux",
"fsl,imx31-audmux";
                                reg = <0x021d8000 0x00004000>;
                                status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <0x0000001e>;
                        };
                        mipi@021dc000 {
                                reg = <0x021dc000 0x00004000>;
                        };
                        mipi@021e0000 {
                                reg = <0x021e0000 0x00004000>;
                        };
                        vdoa@021e4000 {
                                reg = <0x021e4000 0x00004000>;
                                interrupts = <0x00000000 0x00000012 0x00000004>;
                        };
                        serial@021e8000 {
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021e8000 0x00004000>;
                                interrupts = <0x00000000 0x0000001b 0x00000004>;
                                clocks = <0x00000002 0x000000a0
0x00000002 0x000000a1>;
                                clock-names = "ipg", "per";
                                dmas = <0x00000006 0x0000001b
0x00000004 0x00000000 0x00000006 0x0000001c 0x00000004 0x00000000>;
                                dma-names = "rx", "tx";
                                status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <0x0000001f>;
                        };
                        serial@021f4000 {
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021f4000 0x00004000>;
                                interrupts = <0x00000000 0x0000001e 0x00000004>;
                                clocks = <0x00000002 0x000000a0
0x00000002 0x000000a1>;
                                clock-names = "ipg", "per";
                                dmas = <0x00000006 0x00000021
0x00000004 0x00000000 0x00000006 0x00000022 0x00000004 0x00000000>;
                                dma-names = "rx", "tx";
                                status = "okay";
                                pinctrl-names = "default";
                                pinctrl-0 = <0x00000020>;
                        };
                };
                ipu@02400000 {
                        #crtc-cells = <0x00000001>;
                        compatible = "fsl,imx6q-ipu";
                        reg = <0x02400000 0x00400000>;
                        interrupts = <0x00000000 0x00000006 0x00000004
0x00000000 0x00000005 0x00000004>;
                        clocks = <0x00000002 0x00000082 0x00000002
0x00000083 0x00000002 0x00000084>;
                        clock-names = "bus", "di0", "di1";
                        resets = <0x00000021 0x00000002>;
                        linux,phandle = <0x0000000d>;
                        phandle = <0x0000000d>;
                };
                sram@00900000 {
                        compatible = "mmio-sram";
                        reg = <0x00900000 0x00040000>;
                        clocks = <0x00000002 0x0000008e>;
                };
                sata@02200000 {
                        compatible = "fsl,imx6q-ahci";
                        reg = <0x02200000 0x00004000>;
                        interrupts = <0x00000000 0x00000027 0x00000004>;
                        clocks = <0x00000002 0x0000009a 0x00000002
0x000000bb 0x00000002 0x00000069>;
                        clock-names = "sata", "sata_ref", "ahb";
                        status = "okay";
                };
                ipu@02800000 {
                        #crtc-cells = <0x00000001>;
                        compatible = "fsl,imx6q-ipu";
                        reg = <0x02800000 0x00400000>;
                        interrupts = <0x00000000 0x00000008 0x00000004
0x00000000 0x00000007 0x00000004>;
                        clocks = <0x00000002 0x00000085 0x00000002
0x00000086 0x00000002 0x00000089>;
                        clock-names = "bus", "di0", "di1";
                        resets = <0x00000021 0x00000004>;
                        linux,phandle = <0x0000000e>;
                        phandle = <0x0000000e>;
                };
        };
        cpus {
                #address-cells = <0x00000001>;
                #size-cells = <0x00000000>;
                cpu@0 {
                        compatible = "arm,cortex-a9";
                        device_type = "cpu";
                        reg = <0x00000000>;
                        next-level-cache = <0x00000022>;
                        operating-points = <0x00124f80 0x00137478
0x000f32a0 0x001312d0 0x000c15c0 0x00118c30 0x00060ae0 0x000e7ef0>;
                        clock-latency = <0x0000ee6c>;
                        clocks = <0x00000002 0x00000068 0x00000002
0x00000006 0x00000002 0x00000010 0x00000002 0x00000011 0x00000002
0x000000aa>;
                        clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
                        arm-supply = <0x00000023>;
                        pu-supply = <0x00000024>;
                        soc-supply = <0x00000025>;
                };
                cpu@1 {
                        compatible = "arm,cortex-a9";
                        device_type = "cpu";
                        reg = <0x00000001>;
                        next-level-cache = <0x00000022>;
                };
                cpu@2 {
                        compatible = "arm,cortex-a9";
                        device_type = "cpu";
                        reg = <0x00000002>;
                        next-level-cache = <0x00000022>;
                };
                cpu@3 {
                        compatible = "arm,cortex-a9";
                        device_type = "cpu";
                        reg = <0x00000003>;
                        next-level-cache = <0x00000022>;
                };
        };
        leds {
                compatible = "gpio-leds";
                user1 {
                        label = "user1";
                        gpios = <0x00000026 0x00000006 0x00000000>;
                        default-state = "on";
                        linux,default-trigger = "heartbeat";
                };
                user2 {
                        label = "user2";
                        gpios = <0x00000026 0x00000007 0x00000000>;
                        default-state = "off";
                };
                user3 {
                        label = "user3";
                        gpios = <0x00000026 0x0000000f 0x00000001>;
                        default-state = "off";
                };
        };
        pps {
                compatible = "pps-gpio";
                gpios = <0x00000005 0x0000001a 0x00000000>;
                status = "okay";
        };
        regulators {
                compatible = "simple-bus";
                1p0v {
                        compatible = "regulator-fixed";
                        regulator-name = "1P0V";
                        regulator-min-microvolt = <0x000f4240>;
                        regulator-max-microvolt = <0x000f4240>;
                        regulator-always-on;
                };
                3p3v {
                        compatible = "regulator-fixed";
                        regulator-name = "3P3V";
                        regulator-min-microvolt = <0x00325aa0>;
                        regulator-max-microvolt = <0x00325aa0>;
                        regulator-always-on;
                        linux,phandle = <0x00000019>;
                        phandle = <0x00000019>;
                };
                usb_h1_vbus {
                        compatible = "regulator-fixed";
                        regulator-name = "usb_h1_vbus";
                        regulator-min-microvolt = <0x004c4b40>;
                        regulator-max-microvolt = <0x004c4b40>;
                        regulator-always-on;
                        linux,phandle = <0x00000015>;
                        phandle = <0x00000015>;
                };
                usb_otg_vbus {
                        compatible = "regulator-fixed";
                        regulator-name = "usb_otg_vbus";
                        regulator-min-microvolt = <0x004c4b40>;
                        regulator-max-microvolt = <0x004c4b40>;
                        gpio = <0x00000027 0x00000016 0x00000000>;
                        enable-active-high;
                        linux,phandle = <0x00000012>;
                        phandle = <0x00000012>;
                };
        };
        sound {
                compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
                model = "imx6q-sabrelite-sgtl5000";
                ssi-controller = <0x00000028>;
                audio-codec = <0x00000029>;
                audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic
Bias", "Headphone Jack", "HP_OUT";
                mux-int-port = <0x00000001>;
                mux-ext-port = <0x00000004>;
        };
};


Tim

>
> Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tim Harvey March 3, 2014, 11:40 p.m. UTC | #3
On Mon, Mar 3, 2014 at 9:49 AM, Tim Harvey <tharvey@gateworks.com> wrote:
> On Mon, Mar 3, 2014 at 12:11 AM, Jingoo Han <jg1.han@samsung.com> wrote:
>> On Sunday, March 02, 2014 3:31 AM, Jason Gunthorpe wrote:
>>> On Fri, Feb 28, 2014 at 04:53:33PM -0800, Tim Harvey wrote:
>>>
<snip>
> The configuration I'm testing is:
> root@OpenWrt:/# lspci -n
> 00:00.0 0604: 16c3:abcd (rev 01)
> 01:00.0 0604: 10b5:8609 (rev ba)
> 01:00.1 0880: 10b5:8609 (rev ba)
> 02:01.0 0604: 10b5:8609 (rev ba)
> 02:04.0 0604: 10b5:8609 (rev ba)
> 02:05.0 0604: 10b5:8609 (rev ba)
> 02:06.0 0604: 10b5:8609 (rev ba)
> 02:07.0 0604: 10b5:8609 (rev ba)
> 02:08.0 0604: 10b5:8609 (rev ba)
> 02:09.0 0604: 10b5:8609 (rev ba)
> 07:00.0 0280: 168c:002b (rev 01)
> 08:00.0 0200: 11ab:4380
> root@OpenWrt:/# lspci -tnv
> -[0000:00]---00.0-[01-09]--+-00.0-[02-09]--+-01.0-[03]--
>                            |               +-04.0-[04]--
>                            |               +-05.0-[05]--
>                            |               +-06.0-[06]--
>                            |               +-07.0-[07]----00.0  168c:002b
>                            |               +-08.0-[08]----00.0  11ab:4380
>                            |               \-09.0-[09]--
>                            \-00.1  10b5:8609
>
>
> The dev_info showing what of_irq_parse_and_map_pci() above produces:
> [    1.818485] pci 0000:00:00.0: dw_pcie_map_irq: 16c3:abcd slot0 pin1 irq20
> [    1.818703] pci 0000:01:00.0: dw_pcie_map_irq: 10b5:8609 slot0 pin1 irq20
> [    1.818939] pci 0000:01:00.1: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
> [    1.819179] pci 0000:02:01.0: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
> [    1.819395] pci 0000:02:04.0: dw_pcie_map_irq: 10b5:8609 slot0 pin1 irq20
> [    1.819631] pci 0000:02:05.0: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
> [    1.819859] pci 0000:02:06.0: dw_pcie_map_irq: 10b5:8609 slot0 pin3 irq0
> [    1.820087] pci 0000:02:07.0: dw_pcie_map_irq: 10b5:8609 slot0 pin4 irq0
> [    1.820404] pci 0000:02:08.0: dw_pcie_map_irq: 10b5:8609 slot0 pin1 irq20
> [    1.820650] pci 0000:02:09.0: dw_pcie_map_irq: 10b5:8609 slot0 pin2 irq0
> [    1.820881] pci 0000:07:00.0: dw_pcie_map_irq: 168c:002b slot0 pin4 irq0
> [    1.821100] pci 0000:08:00.0: dw_pcie_map_irq: 11ab:4380 slot0 pin1 irq20
>
> I'm not clear why irq 20 is getting returned for all the slots with
> (slot%4)=0 and func=0.  If I start debugging of_irq_parse_pci() I see
> that it walks up the tree until it gets to the pcie host controller
> then calls of_irq_parse_raw() which is returning irq20 or -EINVAL.

For the slots above that are swizzling to pin1 this appears to be an
issue with irq_create_of_mapping() called form
of_irq_parse_and_map_pci().  The GIC function that translates the
interrupt per domain is given irq_data: 0x123 0x04 0x00 (meaning GIC
IRQ 123, which should get 32 added to it for irq155).  Instead, the
implementation of gic_irq_domain_xlate()
(http://lxr.missinglinkelectronics.com/linux/drivers/irqchip/irq-gic.c#L832)
adds 32 to the 0x04 returning 20:
[    1.841781] of_irq_parse_raw:  /soc/pcie@0x01000000:00000001
[    1.841813] of_irq_parse_raw: ipar=/soc/pcie@0x01000000, size=1
[    1.841838]  -> addrsize=3
[    1.841870]  -> match=1 (imaplen=28)
[    1.841903]  -> newintsize=3, newaddrsize=1
[    1.841916]  -> imaplen=23
[    1.841928]  -> new parent: /interrupt-controller@00a01000
[    1.841946]  -> got it !
[    1.841972] irq_create_of_mapping: calling xlate for 123/4/0 3
[    1.841984] irq_create_of_mapping got irq from xlate: 20
^^^^^ added debugging shows 3 u32's passed to xlate and returned value of 20
[    1.841998] irq: irq_create_mapping(0xbec10400, 0x14)
[    1.842009] irq: -> using domain @bec10400
[    1.842021] irq: -> existing mapping on virq 20
[    1.842032] irq_create_of_mapping created virq=20
[    1.842042] irq_create_of_mapping returning virq=20
[    1.842059] pci 0000:00:00.0: dw_pcie_map_irq: 16c3:abcd slot0 pin1 irq20

Perhaps this is a byte-ordering issue?  I'm wondering if the args
created in of_irq_parse_pci are getting put in the wrong place for
what irq_create_of_mapping() expects.

For the slots above that swizzle to pin2,3,4 of_irq_parse_raw()
returns -EINVAL because for some reason it can't match an interrupt
mapping for the pcie host controller:
[    1.842996] of_irq_parse_raw:  /soc/pcie@0x01000000/pcie@0,0:00000002
[    1.843046] of_irq_parse_raw: ipar=/soc/pcie@0x01000000, size=1
[    1.843070]  -> addrsize=3
[    1.843100]  -> match=0 (imaplen=28)
^^^^^ indicates no match in interrupt map.

I think this is because size=1 above, when we should see an
interrupt-map of size 4.  I'm guessing that the function is confused
between the single interrupt in the DT for the host controller, vs the
interrupt-map for the PCI interrupts.

At this point, with no match, of_irq_parse_raw() will travel up to the
parent of the interrupt which is wrong.

Note the pcie host controller DT is:

    pcie: pcie@0x01000000 {
      compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
      reg = <0x01ffc000 0x4000>; /* DBI */
      #address-cells = <3>;
      #size-cells = <2>;
      device_type = "pci";
      ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /*
configuration space */
          0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
          0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /*
non-prefetchable memory */
      num-lanes = <1>;

      interrupts = <0 123 0x04>;

      #interrupt-cells = <1>;
      interrupt-map-mask = <0 0 0 0x7>;
      interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
                      <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
                      <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
                      <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;

      clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
      clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
      status = "disabled";
    };

Tim

>
> Tim
>
>> You can test i.MX PCIe with this.
>>
>> ./drivers/pci/host/pcie-designware.c
>> @@ -726,7 +727,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>>
>>         if (pp) {
>>                 pp->root_bus_nr = sys->busnr;
>> -               bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
>> +               bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
>>                                         sys, &sys->resources);
>>         } else {
>>                 bus = NULL;
>>
>> However, I think that we may need to replace 'pci_common_init()'
>> with 'pci_common_init_dev()'.
>>
>> Best regards,
>> Jingoo Han
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jason Gunthorpe March 4, 2014, 12:01 a.m. UTC | #4
On Mon, Mar 03, 2014 at 03:40:43PM -0800, Tim Harvey wrote:

> of_irq_parse_and_map_pci().  The GIC function that translates the
> interrupt per domain is given irq_data: 0x123 0x04 0x00 

This has been shifted by 1 byte..

> IRQ 123, which should get 32 added to it for irq155).  Instead, the
> implementation of gic_irq_domain_xlate()
> (http://lxr.missinglinkelectronics.com/linux/drivers/irqchip/irq-gic.c#L832)
> adds 32 to the 0x04 returning 20:
> [    1.841781] of_irq_parse_raw:  /soc/pcie@0x01000000:00000001
> [    1.841813] of_irq_parse_raw: ipar=/soc/pcie@0x01000000, size=1
> [    1.841838]  -> addrsize=3
> [    1.841870]  -> match=1 (imaplen=28)
                              ^^^^^^^^^^^^^

That looks odd, it should be the number of dwords in the
interrupt-map, you have 4 lines of 8 dwords each, so it should be
32. 

You have 7*4, which really suggests to me that your interrupt-map
is corrupted somehow, are you sure you are using this:

>       interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>                       <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
>                       <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
>                       <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;

If an element was missing it would explain why everything is broken,
in fact if GIC_SPI was missing it would match the debug perfectly.

> [    1.841903]  -> newintsize=3, newaddrsize=1
> [    1.841916]  -> imaplen=23
> [    1.841928]  -> new parent: /interrupt-controller@00a01000
> [    1.841946]  -> got it !

K..

> [    1.841972] irq_create_of_mapping: calling xlate for 123/4/0 3

And it is the wrong data.. 123/4/0 is 


> For the slots above that swizzle to pin2,3,4 of_irq_parse_raw()
> returns -EINVAL because for some reason it can't match an interrupt
> mapping for the pcie host controller:
> [    1.842996] of_irq_parse_raw:  /soc/pcie@0x01000000/pcie@0,0:00000002
> [    1.843046] of_irq_parse_raw: ipar=/soc/pcie@0x01000000, size=1
> [    1.843070]  -> addrsize=3
> [    1.843100]  -> match=0 (imaplen=28)
> ^^^^^ indicates no match in interrupt map.

Well, since we know the map is corrupted somehow, it isn't surprising
that the 2nd entry won't match anything. It is probably matching
against '0 0 2 &intc'
 
Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designwa
index 3e0c2af..a563a8d 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -493,7 +493,7 @@  int __init dw_pcie_host_init(struct pcie_port *pp)
        dw_pci.nr_controllers = 1;
        dw_pci.private_data = (void **)&pp;

-       pci_common_init(&dw_pci);
+       pci_common_init_dev(pp->dev, &dw_pci);
        pci_assign_unassigned_resources();
 #ifdef CONFIG_PCI_DOMAINS
        dw_pci.domain++;
@@ -726,7 +726,7 @@  static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_s

        if (pp) {
                pp->root_bus_nr = sys->busnr;
-               bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
+               bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
                                        sys, &sys->resources);
        } else {
                bus = NULL;
@@ -742,6 +742,8 @@  static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slo
        int irq;

        irq = of_irq_parse_and_map_pci(dev, slot, pin);
+       dev_info(&dev->dev, "%s: %04x:%04x slot%d pin%d irq%d\n",
+               __func__, dev->vendor, dev->device, slot, pin, irq);
        if (!irq)
                irq = pp->irq;