diff mbox

[2/2] drm/gma500: add locking to fixed panel edid probing

Message ID 1395440556-5850-2-git-send-email-daniel.vetter@ffwll.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Vetter March 21, 2014, 10:22 p.m. UTC
With the recent addition of locking checks in

commit 62ff94a5492175759546f8bc61383189d6b49122
Author:     Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.

Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.

Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/gma500/cdv_intel_lvds.c | 3 +++
 drivers/gpu/drm/gma500/oaktrail_lvds.c  | 5 +++++
 drivers/gpu/drm/gma500/psb_intel_lvds.c | 3 +++
 3 files changed, 11 insertions(+)

Comments

Patrik Jakobsson March 23, 2014, 1:51 p.m. UTC | #1
On Fri, Mar 21, 2014 at 11:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch>wrote:

> With the recent addition of locking checks in
>
> commit 62ff94a5492175759546f8bc61383189d6b49122
> Author:     Daniel Vetter <daniel.vetter@ffwll.ch>
> AuthorDate: Thu Jan 23 22:18:47 2014 +0100
>
>     drm/crtc-helper: remove LOCKING from kerneldoc
>
> drm_add_edid_modes started to WARN about the mode_config.mutex not
> being held in the lvds and dp initialization code.
>
> Now since this is init code locking is fairly redudant if it wouldn't
> be for the drm core registering sysfs files a bit early. And the
> locking WARNINGs nicely enforce that indeed all access to the mode
> lists are properly protected. And a full audit shows that only i915
> and gma500 touch the modes lists at init time.
>
> Hence I've opted to wrap up this entire mode detection sequence for
> fixed panels with the mode_config mutex for both lvds and edp outputs.
>
> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
>  drivers/gpu/drm/gma500/cdv_intel_lvds.c | 3 +++
>  drivers/gpu/drm/gma500/oaktrail_lvds.c  | 5 +++++
>  drivers/gpu/drm/gma500/psb_intel_lvds.c | 3 +++
>  3 files changed, 11 insertions(+)
>
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> index 20e08e65d46c..66a41c026834 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> @@ -712,6 +712,7 @@ void cdv_intel_lvds_init(struct drm_device *dev,
>          * Attempt to get the fixed panel mode from DDC.  Assume that the
>          * preferred mode is the right one.
>          */
> +       mutex_lock(&dev->mode_config.mutex);
>         psb_intel_ddc_get_modes(connector,
>                                 &gma_encoder->ddc_bus->adapter);
>         list_for_each_entry(scan, &connector->probed_modes, head) {
> @@ -772,10 +773,12 @@ void cdv_intel_lvds_init(struct drm_device *dev,
>         }
>
>  out:
> +       mutex_unlock(&dev->mode_config.mutex);
>         drm_sysfs_connector_add(connector);
>         return;
>
>  failed_find:
> +       mutex_unlock(&dev->mode_config.mutex);
>         printk(KERN_ERR "Failed find\n");
>         if (gma_encoder->ddc_bus)
>                 psb_intel_i2c_destroy(gma_encoder->ddc_bus);
> diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c
> b/drivers/gpu/drm/gma500/oaktrail_lvds.c
> index 5e0697862736..9b099468a5db 100644
> --- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
> +++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
> @@ -359,6 +359,7 @@ void oaktrail_lvds_init(struct drm_device *dev,
>          *    if closed, act like it's not there for now
>          */
>
> +       mutex_lock(&dev->mode_config.mutex);
>         i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
>         if (i2c_adap == NULL)
>                 dev_err(dev->dev, "No ddc adapter available!\n");
> @@ -401,10 +402,14 @@ void oaktrail_lvds_init(struct drm_device *dev,
>         }
>
>  out:
> +       mutex_unlock(&dev->mode_config.mutex);
> +
>         drm_sysfs_connector_add(connector);
>         return;
>
>  failed_find:
> +       mutex_unlock(&dev->mode_config.mutex);
> +
>         dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
>         if (gma_encoder->ddc_bus)
>                 psb_intel_i2c_destroy(gma_encoder->ddc_bus);
> diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c
> b/drivers/gpu/drm/gma500/psb_intel_lvds.c
> index 32342f6990d9..891a028a0826 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
> @@ -777,6 +777,7 @@ void psb_intel_lvds_init(struct drm_device *dev,
>          * Attempt to get the fixed panel mode from DDC.  Assume that the
>          * preferred mode is the right one.
>          */
> +       mutex_lock(&dev->mode_config.mutex);
>         psb_intel_ddc_get_modes(connector, &lvds_priv->ddc_bus->adapter);
>         list_for_each_entry(scan, &connector->probed_modes, head) {
>                 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
> @@ -827,10 +828,12 @@ void psb_intel_lvds_init(struct drm_device *dev,
>          * actually having one.
>          */
>  out:
> +       mutex_unlock(&dev->mode_config.mutex);
>         drm_sysfs_connector_add(connector);
>         return;
>
>  failed_find:
> +       mutex_unlock(&dev->mode_config.mutex);
>         if (lvds_priv->ddc_bus)
>                 psb_intel_i2c_destroy(lvds_priv->ddc_bus);
>  failed_ddc:
> --
> 1.8.1.4
>
>
Looks good.

Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
diff mbox

Patch

diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index 20e08e65d46c..66a41c026834 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -712,6 +712,7 @@  void cdv_intel_lvds_init(struct drm_device *dev,
 	 * Attempt to get the fixed panel mode from DDC.  Assume that the
 	 * preferred mode is the right one.
 	 */
+	mutex_lock(&dev->mode_config.mutex);
 	psb_intel_ddc_get_modes(connector,
 				&gma_encoder->ddc_bus->adapter);
 	list_for_each_entry(scan, &connector->probed_modes, head) {
@@ -772,10 +773,12 @@  void cdv_intel_lvds_init(struct drm_device *dev,
 	}
 
 out:
+	mutex_unlock(&dev->mode_config.mutex);
 	drm_sysfs_connector_add(connector);
 	return;
 
 failed_find:
+	mutex_unlock(&dev->mode_config.mutex);
 	printk(KERN_ERR "Failed find\n");
 	if (gma_encoder->ddc_bus)
 		psb_intel_i2c_destroy(gma_encoder->ddc_bus);
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
index 5e0697862736..9b099468a5db 100644
--- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -359,6 +359,7 @@  void oaktrail_lvds_init(struct drm_device *dev,
 	 *    if closed, act like it's not there for now
 	 */
 
+	mutex_lock(&dev->mode_config.mutex);
 	i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
 	if (i2c_adap == NULL)
 		dev_err(dev->dev, "No ddc adapter available!\n");
@@ -401,10 +402,14 @@  void oaktrail_lvds_init(struct drm_device *dev,
 	}
 
 out:
+	mutex_unlock(&dev->mode_config.mutex);
+
 	drm_sysfs_connector_add(connector);
 	return;
 
 failed_find:
+	mutex_unlock(&dev->mode_config.mutex);
+
 	dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
 	if (gma_encoder->ddc_bus)
 		psb_intel_i2c_destroy(gma_encoder->ddc_bus);
diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c
index 32342f6990d9..891a028a0826 100644
--- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
@@ -777,6 +777,7 @@  void psb_intel_lvds_init(struct drm_device *dev,
 	 * Attempt to get the fixed panel mode from DDC.  Assume that the
 	 * preferred mode is the right one.
 	 */
+	mutex_lock(&dev->mode_config.mutex);
 	psb_intel_ddc_get_modes(connector, &lvds_priv->ddc_bus->adapter);
 	list_for_each_entry(scan, &connector->probed_modes, head) {
 		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
@@ -827,10 +828,12 @@  void psb_intel_lvds_init(struct drm_device *dev,
 	 * actually having one.
 	 */
 out:
+	mutex_unlock(&dev->mode_config.mutex);
 	drm_sysfs_connector_add(connector);
 	return;
 
 failed_find:
+	mutex_unlock(&dev->mode_config.mutex);
 	if (lvds_priv->ddc_bus)
 		psb_intel_i2c_destroy(lvds_priv->ddc_bus);
 failed_ddc: