[6/6] ASoC: jz4740: Improve build test coverage
diff mbox

Message ID 1398199596-23649-6-git-send-email-lars@metafoo.de
State Accepted
Commit 0aa2a15a7b5ca861b02379a7dcb2d7bf427c62cc
Headers show

Commit Message

Lars-Peter Clausen April 22, 2014, 8:46 p.m. UTC
Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected.
This should improve the build test coverage. There is one small piece of
platform dependent code in the jz4740-i2s driver. It uses the DMA request type
constants which are defined in a platform specific header. We can solve this by
moving them from the platform specific header to the I2S driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
Preferably this should go through the ASoC tree, but needs an Ack from Ralf for
the MIPS portions.
---
 arch/mips/include/asm/mach-jz4740/dma.h |  2 --
 sound/soc/jz4740/Kconfig                | 11 ++++++++---
 sound/soc/jz4740/jz4740-i2s.c           |  5 +++--
 3 files changed, 11 insertions(+), 7 deletions(-)

Comments

Mark Brown April 23, 2014, 11:19 a.m. UTC | #1
On Tue, Apr 22, 2014 at 10:46:36PM +0200, Lars-Peter Clausen wrote:
> Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected.
> This should improve the build test coverage. There is one small piece of
> platform dependent code in the jz4740-i2s driver. It uses the DMA request type
> constants which are defined in a platform specific header. We can solve this by
> moving them from the platform specific header to the I2S driver.

Applied, thanks.

Patch
diff mbox

diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h
index 509cd58..14ecc53 100644
--- a/arch/mips/include/asm/mach-jz4740/dma.h
+++ b/arch/mips/include/asm/mach-jz4740/dma.h
@@ -22,8 +22,6 @@  enum jz4740_dma_request_type {
 	JZ4740_DMA_TYPE_UART_RECEIVE	= 21,
 	JZ4740_DMA_TYPE_SPI_TRANSMIT	= 22,
 	JZ4740_DMA_TYPE_SPI_RECEIVE	= 23,
-	JZ4740_DMA_TYPE_AIC_TRANSMIT	= 24,
-	JZ4740_DMA_TYPE_AIC_RECEIVE	= 25,
 	JZ4740_DMA_TYPE_MMC_TRANSMIT	= 26,
 	JZ4740_DMA_TYPE_MMC_RECEIVE	= 27,
 	JZ4740_DMA_TYPE_TCU		= 28,
diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig
index 29f76af..1a354a6 100644
--- a/sound/soc/jz4740/Kconfig
+++ b/sound/soc/jz4740/Kconfig
@@ -1,24 +1,29 @@ 
 config SND_JZ4740_SOC
 	tristate "SoC Audio for Ingenic JZ4740 SoC"
-	depends on MACH_JZ4740 && SND_SOC
+	depends on MACH_JZ4740 || COMPILE_TEST
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the JZ4740 I2S interface. You will also need to select the audio
 	  interfaces to support below.
 
+if SND_JZ4740_SOC
+
 config SND_JZ4740_SOC_I2S
-	depends on SND_JZ4740_SOC
 	tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC"
+	depends on HAS_IOMEM
 	help
 	  Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740
 	  based boards.
 
 config SND_JZ4740_SOC_QI_LB60
 	tristate "SoC Audio support for Qi LB60"
-	depends on SND_JZ4740_SOC && JZ4740_QI_LB60
+	depends on HAS_IOMEM
+	depends on JZ4740_QI_LB60 || COMPILE_TEST
 	select SND_JZ4740_SOC_I2S
     select SND_SOC_JZ4740_CODEC
 	help
 	  Say Y if you want to add support for ASoC audio on the Qi LB60 board
 	  a.k.a Qi Ben NanoNote.
+
+endif
diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index 8f22000..3f9c3a9 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -31,10 +31,11 @@ 
 #include <sound/initval.h>
 #include <sound/dmaengine_pcm.h>
 
-#include <asm/mach-jz4740/dma.h>
-
 #include "jz4740-i2s.h"
 
+#define JZ4740_DMA_TYPE_AIC_TRANSMIT 24
+#define JZ4740_DMA_TYPE_AIC_RECEIVE 25
+
 #define JZ_REG_AIC_CONF		0x00
 #define JZ_REG_AIC_CTRL		0x04
 #define JZ_REG_AIC_I2S_FMT	0x10