diff mbox

[3/5] dt: wm8904: add device tree binding document

Message ID 1401963572-10953-4-git-send-email-voice.shen@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bo Shen June 5, 2014, 10:19 a.m. UTC
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
 Documentation/devicetree/bindings/sound/wm8904.txt | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/wm8904.txt

Comments

Mark Brown June 6, 2014, 9:58 a.m. UTC | #1
On Thu, Jun 05, 2014 at 06:19:30PM +0800, Bo Shen wrote:

> +  - reg: the I2C address of the device.
> +  - clocks and clock-names: reference to
> +    <Documentation/devicetree/bindings/clock/clock-bindings.txt>

This all looks good except for in the above you should list the name of
the clock (mclk) - that name is part of the binding.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt
new file mode 100644
index 0000000..ef3d23da
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8904.txt
@@ -0,0 +1,32 @@ 
+WM8904 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+  - compatible: "wlf,wm8904"
+  - reg: the I2C address of the device.
+  - clocks and clock-names: reference to
+    <Documentation/devicetree/bindings/clock/clock-bindings.txt>
+
+Pins on the device (for linking into audio routes):
+
+  * IN1L
+  * IN1R
+  * IN2L
+  * IN2R
+  * IN3L
+  * IN3R
+  * HPOUTL
+  * HPOUTR
+  * LINEOUTL
+  * LINEOUTR
+  * MICBIAS
+
+Examples:
+
+codec: wm8904@1a {
+	compatible = "wlf,wm8904";
+	reg = <0x1a>;
+	clocks = <&pck0>;
+	clock-names = "mclk";
+};