| Message ID | 1408392810-16011-2-git-send-email-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Aug 18, 2014 at 03:13:29PM -0500, Nishanth Menon wrote: > Many palmas family of PMICs have support for interrupt based power > button. This allows the device to notify the processor of external > push button events over the shared palmas interrupt. > > Document the hardware support for the same. > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > .../bindings/input/ti,palmas-pwrbutton.txt | 32 ++++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt > > diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt > new file mode 100644 > index 0000000..6a89bcd > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt > @@ -0,0 +1,32 @@ > +Texas Instruments Palmas family power button module > + > +This module is part of the Palmas family of PMICs. For more details > +about the whole chip see: > +Documentation/devicetree/bindings/mfd/palmas.txt. > + > +This module provides a simple power button event via an Interrupt. > + > +Required properties: > +- compatible: should be one of the following > + - "ti,palmas-pwrbutton": For Palmas compatible power on button > +- interrupt-parent: Parent interrupt device, must be handle of palmas node. > +- interrupts: Interrupt number of power button submodule on device. > + > +Optional Properties: > + > +- ti,palmas-long-press-seconds: Duration in seconds which the power > + button should be kept pressed for Palmas to power off automatically. > + NOTE: This depends on OTP support and POWERHOLD signal configuration > + on platform. Only a few values are valid for this property, I think you should mention that. > + > +Example: > + > +&palmas { > + palmas_pwr_button: pwrbutton { > + compatible = "ti,palmas-pwrbutton"; > + interrupt-parent = <&tps659038>; > + interrupts = <1 IRQ_TYPE_NONE>; Why none? Can we specify appropriate trigger here instead of hard-coding in the driver? > + wakeup-source; What handles this attribute? I do not see it handled in the driver. > + ti,palmas-long-press-seconds = <12>; > + }; > +}; > -- > 1.7.9.5 > Thanks.
On 08/19/2014 12:28 AM, Dmitry Torokhov wrote: > On Mon, Aug 18, 2014 at 03:13:29PM -0500, Nishanth Menon wrote: >> Many palmas family of PMICs have support for interrupt based power >> button. This allows the device to notify the processor of external >> push button events over the shared palmas interrupt. >> >> Document the hardware support for the same. >> >> Signed-off-by: Nishanth Menon <nm@ti.com> >> --- >> .../bindings/input/ti,palmas-pwrbutton.txt | 32 ++++++++++++++++++++ >> 1 file changed, 32 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt >> >> diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt >> new file mode 100644 >> index 0000000..6a89bcd >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt >> @@ -0,0 +1,32 @@ >> +Texas Instruments Palmas family power button module >> + >> +This module is part of the Palmas family of PMICs. For more details >> +about the whole chip see: >> +Documentation/devicetree/bindings/mfd/palmas.txt. >> + >> +This module provides a simple power button event via an Interrupt. >> + >> +Required properties: >> +- compatible: should be one of the following >> + - "ti,palmas-pwrbutton": For Palmas compatible power on button >> +- interrupt-parent: Parent interrupt device, must be handle of palmas node. >> +- interrupts: Interrupt number of power button submodule on device. >> + >> +Optional Properties: >> + >> +- ti,palmas-long-press-seconds: Duration in seconds which the power >> + button should be kept pressed for Palmas to power off automatically. >> + NOTE: This depends on OTP support and POWERHOLD signal configuration >> + on platform. > > Only a few values are valid for this property, I think you should mention that. Agreed. Will do so. > >> + >> +Example: >> + >> +&palmas { >> + palmas_pwr_button: pwrbutton { >> + compatible = "ti,palmas-pwrbutton"; >> + interrupt-parent = <&tps659038>; >> + interrupts = <1 IRQ_TYPE_NONE>; > > Why none? Can we specify appropriate trigger here instead of hard-coding in the > driver? Following the convention as in Documentation/devicetree/bindings/mfd/palmas.txt - for whatever reason we went with interrupt-cells = <2> when palmas interrupt configuration was hardcoded in the chip(not reconfigurable). I believe it was level, will check and update the example here. > >> + wakeup-source; > > What handles this attribute? I do not see it handled in the driver. we dont explicitly need to in the driver, it was meant to indicate that this is a wakeup source, but in reality, it is a palmas PMIC which is the wakeup source.. so, will drop this. > >> + ti,palmas-long-press-seconds = <12>; >> + }; >> +}; >> -- >> 1.7.9.5 >> > > Thanks. > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt new file mode 100644 index 0000000..6a89bcd --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt @@ -0,0 +1,32 @@ +Texas Instruments Palmas family power button module + +This module is part of the Palmas family of PMICs. For more details +about the whole chip see: +Documentation/devicetree/bindings/mfd/palmas.txt. + +This module provides a simple power button event via an Interrupt. + +Required properties: +- compatible: should be one of the following + - "ti,palmas-pwrbutton": For Palmas compatible power on button +- interrupt-parent: Parent interrupt device, must be handle of palmas node. +- interrupts: Interrupt number of power button submodule on device. + +Optional Properties: + +- ti,palmas-long-press-seconds: Duration in seconds which the power + button should be kept pressed for Palmas to power off automatically. + NOTE: This depends on OTP support and POWERHOLD signal configuration + on platform. + +Example: + +&palmas { + palmas_pwr_button: pwrbutton { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; +};
Many palmas family of PMICs have support for interrupt based power button. This allows the device to notify the processor of external push button events over the shared palmas interrupt. Document the hardware support for the same. Signed-off-by: Nishanth Menon <nm@ti.com> --- .../bindings/input/ti,palmas-pwrbutton.txt | 32 ++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt