| Message ID | 1408716741-1163-1-git-send-email-dmurphy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Aug 22, 2014 at 09:12:21AM -0500, Dan Murphy wrote: > Update the drv260x dt binding document: > - Change the node name to the devices function not the > device name. > - Add vbat-supply to the example. > - Fix indentation of the example. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > .../devicetree/bindings/input/ti,drv260x.txt | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt > index a9c8519..214e25d 100644 > --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt > +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt > @@ -37,15 +37,16 @@ Optional properties: > 3.2 v. > Example: > > -drv2605l: drv2605l@5a { > - compatible = "ti,drv2605l"; > - reg = <0x5a>; > - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > - mode = <DRV260X_LRA_MODE>; > - library-sel = <DRV260X_LIB_LRA>; > - vib-rated-mv = <3200>; > - vib-overdriver-mv = <3200>; > -}; > +haptics:@5a { haptics: haptics@5a ??
Felipe On 08/22/2014 09:15 AM, Balbi, Felipe wrote: > On Fri, Aug 22, 2014 at 09:12:21AM -0500, Dan Murphy wrote: >> Update the drv260x dt binding document: >> - Change the node name to the devices function not the >> device name. >> - Add vbat-supply to the example. >> - Fix indentation of the example. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> .../devicetree/bindings/input/ti,drv260x.txt | 19 ++++++++++--------- >> 1 file changed, 10 insertions(+), 9 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt >> index a9c8519..214e25d 100644 >> --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt >> +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt >> @@ -37,15 +37,16 @@ Optional properties: >> 3.2 v. >> Example: >> >> -drv2605l: drv2605l@5a { >> - compatible = "ti,drv2605l"; >> - reg = <0x5a>; >> - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; >> - mode = <DRV260X_LRA_MODE>; >> - library-sel = <DRV260X_LIB_LRA>; >> - vib-rated-mv = <3200>; >> - vib-overdriver-mv = <3200>; >> -}; >> +haptics:@5a { > > haptics: haptics@5a ?? > I found both types of entries in the bindings docs. There is no consistency within the input bindings documentation. I have no issue doing it either way. Dan
Hi, On Fri, Aug 22, 2014 at 09:25:13AM -0500, Murphy, Dan wrote: > Felipe > > On 08/22/2014 09:15 AM, Balbi, Felipe wrote: > > On Fri, Aug 22, 2014 at 09:12:21AM -0500, Dan Murphy wrote: > >> Update the drv260x dt binding document: > >> - Change the node name to the devices function not the > >> device name. > >> - Add vbat-supply to the example. > >> - Fix indentation of the example. > >> > >> Signed-off-by: Dan Murphy <dmurphy@ti.com> > >> --- > >> .../devicetree/bindings/input/ti,drv260x.txt | 19 ++++++++++--------- > >> 1 file changed, 10 insertions(+), 9 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt > >> index a9c8519..214e25d 100644 > >> --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt > >> +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt > >> @@ -37,15 +37,16 @@ Optional properties: > >> 3.2 v. > >> Example: > >> > >> -drv2605l: drv2605l@5a { > >> - compatible = "ti,drv2605l"; > >> - reg = <0x5a>; > >> - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > >> - mode = <DRV260X_LRA_MODE>; > >> - library-sel = <DRV260X_LIB_LRA>; > >> - vib-rated-mv = <3200>; > >> - vib-overdriver-mv = <3200>; > >> -}; > >> +haptics:@5a { > > > > haptics: haptics@5a ?? > > > > I found both types of entries in the bindings docs. > There is no consistency within the input bindings documentation. I could swear neither two types have a colon character between node name and its base address.
Felipe On 08/22/2014 09:45 AM, Balbi, Felipe wrote: > Hi, > > On Fri, Aug 22, 2014 at 09:25:13AM -0500, Murphy, Dan wrote: >> Felipe >> >> On 08/22/2014 09:15 AM, Balbi, Felipe wrote: >>> On Fri, Aug 22, 2014 at 09:12:21AM -0500, Dan Murphy wrote: >>>> Update the drv260x dt binding document: >>>> - Change the node name to the devices function not the >>>> device name. >>>> - Add vbat-supply to the example. >>>> - Fix indentation of the example. >>>> >>>> Signed-off-by: Dan Murphy <dmurphy@ti.com> >>>> --- >>>> .../devicetree/bindings/input/ti,drv260x.txt | 19 ++++++++++--------- >>>> 1 file changed, 10 insertions(+), 9 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt >>>> index a9c8519..214e25d 100644 >>>> --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt >>>> +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt >>>> @@ -37,15 +37,16 @@ Optional properties: >>>> 3.2 v. >>>> Example: >>>> >>>> -drv2605l: drv2605l@5a { >>>> - compatible = "ti,drv2605l"; >>>> - reg = <0x5a>; >>>> - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; >>>> - mode = <DRV260X_LRA_MODE>; >>>> - library-sel = <DRV260X_LIB_LRA>; >>>> - vib-rated-mv = <3200>; >>>> - vib-overdriver-mv = <3200>; >>>> -}; >>>> +haptics:@5a { >>> >>> haptics: haptics@5a ?? >>> >> >> I found both types of entries in the bindings docs. >> There is no consistency within the input bindings documentation. > > I could swear neither two types have a colon character between node name > and its base address. > I will add it to the fixes. Dan
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index a9c8519..214e25d 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -37,15 +37,16 @@ Optional properties: 3.2 v. Example: -drv2605l: drv2605l@5a { - compatible = "ti,drv2605l"; - reg = <0x5a>; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mode = <DRV260X_LRA_MODE>; - library-sel = <DRV260X_LIB_LRA>; - vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; -}; +haptics:@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + vbat-supply = <&vbat>; + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + vib-rated-mv = <3200>; + vib-overdriver-mv = <3200>; +} For more product information please see the link below: http://www.ti.com/product/drv2605
Update the drv260x dt binding document: - Change the node name to the devices function not the device name. - Add vbat-supply to the example. - Fix indentation of the example. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/input/ti,drv260x.txt | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)