[0/3] omap3: devkit8000: misc fixes
diff mbox

Message ID 4D300DC8.7000803@corscience.de
State Superseded
Delegated to: Tony Lindgren
Headers show

Commit Message

Thomas Weber Jan. 14, 2011, 8:48 a.m. UTC
None

Patch
diff mbox

diff --git a/arch/arm/mach-omap2/board-devkit8000.c
b/arch/arm/mach-omap2/board-devkit8000.c
index 8dc7a24..54f1f7f 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -114,9 +114,6 @@  static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-       twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-       twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
        if (gpio_is_valid(dssdev->reset_gpio))
                gpio_set_value_cansleep(dssdev->reset_gpio, 1);
        return 0;
@@ -245,8 +242,8 @@  static int devkit8000_twl_gpio_setup(struct device *dev,
        /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
        gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-       /* gpio + 1 is "LCD_PWREN" (out, active high) */
-       devkit8000_lcd_device.reset_gpio = gpio + 1;
+       /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+       devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
        gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
        /* Disable until needed */
        gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);