diff mbox

ASoC: rockchip-i2s: dt: swap tx and rx channed request number

Message ID 1410570281-23681-1-git-send-email-jay.xu@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jianqun Xu Sept. 13, 2014, 1:04 a.m. UTC
Reference to RK3288 TRM, fix an error channel id for i2s tx and rx
Table 10-1 DMAC_BUS Request Mapping Table
Req number	Source	Polarity
0		I2S tx	High level
1		I2S rx	High level

Tested on RK3288 board.

Signed-off-by: Jianqun <jay.xu@rock-chips.com>
---
 Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mark Brown Sept. 13, 2014, 4:40 p.m. UTC | #1
On Sat, Sep 13, 2014 at 09:04:41AM +0800, Jianqun wrote:
> Reference to RK3288 TRM, fix an error channel id for i2s tx and rx
> Table 10-1 DMAC_BUS Request Mapping Table
> Req number	Source	Polarity
> 0		I2S tx	High level
> 1		I2S rx	High level

Applied, thanks.  The changelog should've just noted that this is an
error in the example rather than the code or the binding, I was a bit
confused about this.
jianqun Sept. 14, 2014, 2:29 a.m. UTC | #2
? 09/14/2014 12:40 AM, Mark Brown ??:
> On Sat, Sep 13, 2014 at 09:04:41AM +0800, Jianqun wrote:
>> Reference to RK3288 TRM, fix an error channel id for i2s tx and rx
>> Table 10-1 DMAC_BUS Request Mapping Table
>> Req number	Source	Polarity
>> 0		I2S tx	High level
>> 1		I2S rx	High level
> 
> Applied, thanks.  The changelog should've just noted that this is an
> error in the example rather than the code or the binding, I was a bit
> confused about this.
> 
ok, I will do it
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 6c55fcf..9b82c20 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -31,7 +31,7 @@  i2s@ff890000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "rx", "tx";
+	dma-names = "tx", "rx";
 	clock-names = "i2s_hclk", "i2s_clk";
 	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 };