[v3,2/5] drm/tilcdc: Add I2S HDMI audio config for tda998x
diff mbox

Message ID 5580c70666076104fbc7ece7ddd0f035d0c9d5a3.1410898073.git.jsarha@ti.com
State New, archived
Headers show

Commit Message

Jyri Sarha Sept. 16, 2014, 8:40 p.m. UTC
The configuration is needed for HDMI audio. The "swap" and "mirr"
parameters have to be correctly set in the configuration in order to
have proper colors in the HDMI picture.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_slave.c |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

Patch
diff mbox

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index 3775fd4..5dd8d78 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -19,6 +19,7 @@ 
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/consumer.h>
 #include <drm/drm_encoder_slave.h>
+#include <drm/i2c/tda998x.h>
 
 #include "tilcdc_drv.h"
 
@@ -111,8 +112,29 @@  static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = {
 		.restore        = drm_i2c_encoder_restore,
 };
 
+static struct tda998x_encoder_params tda998x_pdata = {
+	.swap_b = 0x3,
+	.mirr_b = 0x0,
+	.swap_a = 0x2,
+	.mirr_a = 0x0,
+	.swap_d = 0x1,
+	.mirr_d = 0x0,
+	.swap_c = 0x0,
+	.mirr_c = 0x0,
+	.swap_f = 0x5,
+	.mirr_f = 0x0,
+	.swap_e = 0x4,
+	.mirr_e = 0x0,
+	.audio_cfg = 0x3,	/* I2S mode */
+	.audio_clk_cfg = 1,	/* select clock pin */
+	.audio_frame[1] = 1,	/* channels - 1 */
+	.audio_format = AFMT_I2S,
+	.audio_sample_rate = 48000,
+};
+
 static const struct i2c_board_info info = {
-		I2C_BOARD_INFO("tda998x", 0x70)
+		I2C_BOARD_INFO("tda998x", 0x70),
+		.platform_data = &tda998x_pdata,
 };
 
 static struct drm_encoder *slave_encoder_create(struct drm_device *dev,