ASoC: sgtl5000: Improve the error message on slave mode setting
diff mbox

Message ID 1412277410-25888-1-git-send-email-festevam@gmail.com
State Accepted
Commit fa558d0130debf847b6b8cd95880a2d7556770ac
Headers show

Commit Message

Fabio Estevam Oct. 2, 2014, 7:16 p.m. UTC
From: Fabio Estevam <fabio.estevam@freescale.com>

For sgtl5000 to operate in slave mode it can only work in "Synchronous
SYS_MCLK input" mode.

In this mode only the following rates can be supported: 256*Fs, 384*Fs, 512*Fs.

Improve the error message to give a better indication as to why the clocking 
failed for slave mode:

[   12.515399] sgtl5000 1-000a: PLL not supported in slave mode
[   12.524124] sgtl5000 1-000a: 233 ratio is not supported. SYS_MCLK needs to be 256, 384 or 512 * fs
[   12.535938] sgtl5000 1-000a: ASoC: can't set sgtl5000 hw params: -22

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 sound/soc/codecs/sgtl5000.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Mark Brown Oct. 3, 2014, 10:20 a.m. UTC | #1
On Thu, Oct 02, 2014 at 04:16:50PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> For sgtl5000 to operate in slave mode it can only work in "Synchronous
> SYS_MCLK input" mode.

Applied, thanks.

Patch
diff mbox

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index a604a22..c1936bc 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -626,6 +626,9 @@  static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
 		} else {
 			dev_err(codec->dev,
 				"PLL not supported in slave mode\n");
+			dev_err(codec->dev, "%d ratio is not supported. "
+				"SYS_MCLK needs to be 256, 384 or 512 * fs\n",
+				sgtl5000->sysclk / sys_fs);
 			return -EINVAL;
 		}
 	}