diff mbox

clk: rockchip: fix clock select order for usbphy480m_src

Message ID 1415866309-3277-1-git-send-email-kever.yang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kever Yang Nov. 13, 2014, 8:11 a.m. UTC
According to rk3288 trm, the mux selector locate at bit[12:11]
of CRU_CLKSEL13_CON shows:
2'b00: select HOST0 USB pll clock (clk_otgphy1)
2'b01: select HOST1 USB pll clock (clk_otgphy2)
2'b10: select OTG USB pll clock   (clk_otgphy0)

The clock map is in Fig. 3-4 CRU Clock Architecture Diagram 3
- clk_otgphy0 -> USB PHY OTG
- clk_otgphy1 -> USB PHY host0
- clk_otgphy2 -> USB PHY host1

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3288.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Heiko Stuebner Nov. 15, 2014, 11:41 p.m. UTC | #1
Am Donnerstag, 13. November 2014, 16:11:49 schrieb Kever Yang:
> According to rk3288 trm, the mux selector locate at bit[12:11]
> of CRU_CLKSEL13_CON shows:
> 2'b00: select HOST0 USB pll clock (clk_otgphy1)
> 2'b01: select HOST1 USB pll clock (clk_otgphy2)
> 2'b10: select OTG USB pll clock   (clk_otgphy0)
> 
> The clock map is in Fig. 3-4 CRU Clock Architecture Diagram 3
> - clk_otgphy0 -> USB PHY OTG
> - clk_otgphy1 -> USB PHY host0
> - clk_otgphy2 -> USB PHY host1
> 
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

applied this to my clk branch for 3.19


Heiko
diff mbox

Patch

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 157b60b..4d70518 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -195,8 +195,8 @@  PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_usbphy480m_p)		= { "sclk_otgphy0", "sclk_otgphy1",
-				    "sclk_otgphy2" };
+PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1", "sclk_otgphy2",
+				    "sclk_otgphy0" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
 PNAME(mux_hsicphy12m_p)		= { "hsicphy12m_xin12m", "hsicphy12m_usbphy" };