[v2,2/2] pinctrl: rockchip: Fix enable/disable/mask/unmask
diff mbox

Message ID 1416437493-25588-3-git-send-email-dianders@chromium.org
State New, archived
Headers show

Commit Message

Doug Anderson Nov. 19, 2014, 10:51 p.m. UTC
The Rockchip pinctrl driver was only implementing the "mask" and
"unmask" operations though the hardware actually has two distinct
things: enable/disable and mask/unmask.  It was implementing the
"mask" operations as a hardware enable/disable and always leaving all
interrupts unmasked.

I believe that the old system had some downsides, specifically:
- (Untested) if an interrupt went off while interrupts were "masked"
  it would be lost.  Now it will be kept track of.
- If someone wanted to change an interrupt back into a GPIO (is such a
  thing sensible?) by calling irq_disable() it wouldn't actually take
  effect.  That's because Linux does some extra optimizations when
  there's no true "disable" function: it does a lazy mask.

Let's actually implement enable/disable/mask/unmask properly.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v2:
- Spread out code (heiko)

 drivers/pinctrl/pinctrl-rockchip.c | 36 +++++++++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

Comments

Linus Walleij Nov. 28, 2014, 8:06 a.m. UTC | #1
On Wed, Nov 19, 2014 at 11:51 PM, Doug Anderson <dianders@chromium.org> wrote:

> The Rockchip pinctrl driver was only implementing the "mask" and
> "unmask" operations though the hardware actually has two distinct
> things: enable/disable and mask/unmask.  It was implementing the
> "mask" operations as a hardware enable/disable and always leaving all
> interrupts unmasked.
>
> I believe that the old system had some downsides, specifically:
> - (Untested) if an interrupt went off while interrupts were "masked"
>   it would be lost.  Now it will be kept track of.
> - If someone wanted to change an interrupt back into a GPIO (is such a
>   thing sensible?) by calling irq_disable() it wouldn't actually take
>   effect.  That's because Linux does some extra optimizations when
>   there's no true "disable" function: it does a lazy mask.
>
> Let's actually implement enable/disable/mask/unmask properly.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
> Changes in v2:
> - Spread out code (heiko)

Patch applied.

Yours,
Linus Walleij

Patch
diff mbox

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index e91e845..3c22dbe 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1562,6 +1562,34 @@  static void rockchip_irq_resume(struct irq_data *d)
 	irq_reg_writel(gc, bank->saved_enables, GPIO_INTEN);
 }
 
+static void rockchip_irq_disable(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 val;
+
+	irq_gc_lock(gc);
+
+	val = irq_reg_readl(gc, GPIO_INTEN);
+	val &= ~d->mask;
+	irq_reg_writel(gc, val, GPIO_INTEN);
+
+	irq_gc_unlock(gc);
+}
+
+static void rockchip_irq_enable(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 val;
+
+	irq_gc_lock(gc);
+
+	val = irq_reg_readl(gc, GPIO_INTEN);
+	val |= d->mask;
+	irq_reg_writel(gc, val, GPIO_INTEN);
+
+	irq_gc_unlock(gc);
+}
+
 static int rockchip_interrupts_register(struct platform_device *pdev,
 						struct rockchip_pinctrl *info)
 {
@@ -1600,11 +1628,13 @@  static int rockchip_interrupts_register(struct platform_device *pdev,
 		gc = irq_get_domain_generic_chip(bank->domain, 0);
 		gc->reg_base = bank->reg_base;
 		gc->private = bank;
-		gc->chip_types[0].regs.mask = GPIO_INTEN;
+		gc->chip_types[0].regs.mask = GPIO_INTMASK;
 		gc->chip_types[0].regs.ack = GPIO_PORTS_EOI;
 		gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
-		gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
-		gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+		gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit;
+		gc->chip_types[0].chip.irq_enable = rockchip_irq_enable;
+		gc->chip_types[0].chip.irq_disable = rockchip_irq_disable;
 		gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake;
 		gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend;
 		gc->chip_types[0].chip.irq_resume = rockchip_irq_resume;