@@ -252,6 +252,9 @@
compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
reg = <0x06000580 0x4>;
clocks = <&ahb0>;
+ clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+ <14>, <15>, <16>, <18>, <20>, <21>,
+ <22>, <23>;
clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
@@ -265,6 +268,7 @@
compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
reg = <0x06000584 0x4>;
clocks = <&ahb1>;
+ clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
"ahb1_gmac", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_hstimer",
@@ -276,6 +280,8 @@
compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
reg = <0x06000588 0x4>;
clocks = <&ahb2>;
+ clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+ <11>;
clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
@@ -286,6 +292,8 @@
compatible = "allwinner,sun9i-a80-apb0-gates-clk";
reg = <0x06000590 0x4>;
clocks = <&apb0>;
+ clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+ <17>, <18>, <19>;
clock-output-names = "apb0_spdif", "apb0_pio",
"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
"apb0_lradc", "apb0_gpadc", "apb0_twd",
@@ -297,6 +305,8 @@
compatible = "allwinner,sun9i-a80-apb1-gates-clk";
reg = <0x06000594 0x4>;
clocks = <&apb1>;
+ clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <16>, <17>, <18>, <19>, <20>, <21>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
"apb1_uart0", "apb1_uart1",
of_clk_get_parent_name() uses the clock-indices property to resolve clock phandle arguments in case that the argument index does not match the clock-output-names sequence. This is the case on sunxi, where we use the actual bit index as the argument to the phandle. Add the clock-indices property so that of_clk_get_parent_name() resolves the names correctly. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun9i-a80.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)