[v4,2/5] Documentation: bindings: add doc for the Rockchip usb PHY
diff mbox

Message ID 1418093293-30557-1-git-send-email-lyz@rock-chips.com
State New, archived
Headers show

Commit Message

LiYunzhi Dec. 9, 2014, 2:48 a.m. UTC
Document the bindings of the Rockchip usb PHY driver.

Signed-off-by: Yunzhi Li <lyz@rock-chips.com>

---

Changes in v4:
- Updata description for phy device tree subnode.

Changes in v3: None

 .../devicetree/bindings/phy/rockchip-usb-phy.txt   | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt

Comments

Romain Perier Dec. 9, 2014, 2:42 p.m. UTC | #1
Hi,

2014-12-09 3:48 GMT+01:00 Yunzhi Li <lyz@rock-chips.com>:
> Document the bindings of the Rockchip usb PHY driver.


Long description is the same than the short one.. So either the long
description is useless
or it can be improved.

>
> +Required properties:
> + - compatible: rockchip,rk3288-usb-phy
> + - rockchip,grf : phandle to the syscon managing the "general
> +   register files"
> + - #phy-cells: should be 1
> + - #address-cells: should be 1
> + - #size-cells: should be 0
> +
> +Sub-nodes:
> +Each PHY should be represented as a sub-node.
> +
> +Sub-nodes
> +required properties:
> +- reg: the PHY number
> +               "0" - PHY connect to OTG controller
> +               "1" - PHY connect to HOST0 controller
> +               "2" - PHY connect to HOST1 controller
> +
> +Optional Properties:
> +- clocks : phandle + clock specifier for the phy clocks
> +
> +Example:
> +
> +usbphy: phy {
> +       #phy-cells = <1>;
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       compatible = "rockchip,rk3288-usb-phy";
> +       rockchip,grf = <&grf>;
> +};

Could you reorder these properties to have the same order than in the
"required properties" ? Something like:

usbphy: phy {
       compatible = "rockchip,rk3288-usb-phy";
       rockchip,grf = <&grf>;
       #phy-cells = <1>;
       #address-cells = <1>;
       #size-cells = <0>;
};

Thanks,
Romain

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
new file mode 100644
index 0000000..0b725e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -0,0 +1,32 @@ 
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - #phy-cells: should be 1
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes
+required properties:
+- reg: the PHY number
+		"0" - PHY connect to OTG controller
+		"1" - PHY connect to HOST0 controller
+		"2" - PHY connect to HOST1 controller
+
+Optional Properties:
+- clocks : phandle + clock specifier for the phy clocks
+
+Example:
+
+usbphy: phy {
+	#phy-cells = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "rockchip,rk3288-usb-phy";
+	rockchip,grf = <&grf>;
+};