| Message ID | 54A10B1E.7030800@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Mon, Dec 29, 2014 at 10:04:46AM +0200, Tomi Valkeinen wrote: > On 26/12/14 00:21, Aaro Koskinen wrote: > > > ...however, I can confirm that framebuffer is broken: > > > > [ 8.230743] omapfb omapfb: no displays > > [ 8.255584] omapfb omapfb: failed to setup omapfb > > [ 8.260620] platform omapfb: Driver omapfb requests probe deferral > > [ 8.284118] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node > > '/ocp/spi@48098000/acx565akm@2[0]' - status (0) > > [ 8.284271] acx565akm spi1.2: failed to find video source > > [ 8.290069] spi spi1.2: Driver acx565akm requests probe deferral > > > > I bisected it to ef691ff48bc8 (OMAPDSS: DT: Get source endpoint > > by matching reg-id). When I revert that, also FB works with 3.19-rc1. > > I've attached a patch for this. Only hack-tested on OMAP3 beagle, so > please report if it works. That works, thanks. A. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon 2014-12-29 10:04:46, Tomi Valkeinen wrote: > Hi, > > On 26/12/14 00:21, Aaro Koskinen wrote: > > > ...however, I can confirm that framebuffer is broken: > > > > [ 8.230743] omapfb omapfb: no displays > > [ 8.255584] omapfb omapfb: failed to setup omapfb > > [ 8.260620] platform omapfb: Driver omapfb requests probe deferral > > [ 8.284118] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node > > '/ocp/spi@48098000/acx565akm@2[0]' - status (0) > > [ 8.284271] acx565akm spi1.2: failed to find video source > > [ 8.290069] spi spi1.2: Driver acx565akm requests probe deferral > > > > I bisected it to ef691ff48bc8 (OMAPDSS: DT: Get source endpoint > > by matching reg-id). When I revert that, also FB works with 3.19-rc1. > > I've attached a patch for this. Only hack-tested on OMAP3 beagle, so > please report if it works. This fixes the issue for me. Tested-by: Pavel Machek <pavel@ucw.cz> > From fe3e8dde8eae80541a3f3b39c421428ebd02955f Mon Sep 17 00:00:00 2001 > From: Tomi Valkeinen <tomi.valkeinen@ti.com> > Date: Mon, 29 Dec 2014 09:57:11 +0200 > Subject: [PATCH] OMAPDSS: SDI: fix output port_num > > After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by > matching reg-id) we look for the SDI output using the port number. > However, the SDI driver doesn't set the port number, which causes the > SDI display to not initialize. > > Fix this by setting the SDI port number to 1. We use a hardcoded value, > as SDI was used only on OMAP3 and it's always port number 1 there. > > Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> > Reported-by: Pavel Machek <pavel@ucw.cz> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > --- > drivers/video/fbdev/omap2/dss/sdi.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/video/fbdev/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c > index d51a983075bc..5c2ccab5a958 100644 > --- a/drivers/video/fbdev/omap2/dss/sdi.c > +++ b/drivers/video/fbdev/omap2/dss/sdi.c > @@ -342,6 +342,8 @@ static void sdi_init_output(struct platform_device *pdev) > out->output_type = OMAP_DISPLAY_TYPE_SDI; > out->name = "sdi.0"; > out->dispc_channel = OMAP_DSS_CHANNEL_LCD; > + /* We have SDI only on OMAP3, where it's on port 1 */ > + out->port_num = 1; > out->ops.sdi = &sdi_ops; > out->owner = THIS_MODULE; >
From fe3e8dde8eae80541a3f3b39c421428ebd02955f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen <tomi.valkeinen@ti.com> Date: Mon, 29 Dec 2014 09:57:11 +0200 Subject: [PATCH] OMAPDSS: SDI: fix output port_num After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by matching reg-id) we look for the SDI output using the port number. However, the SDI driver doesn't set the port number, which causes the SDI display to not initialize. Fix this by setting the SDI port number to 1. We use a hardcoded value, as SDI was used only on OMAP3 and it's always port number 1 there. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/video/fbdev/omap2/dss/sdi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/fbdev/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c index d51a983075bc..5c2ccab5a958 100644 --- a/drivers/video/fbdev/omap2/dss/sdi.c +++ b/drivers/video/fbdev/omap2/dss/sdi.c @@ -342,6 +342,8 @@ static void sdi_init_output(struct platform_device *pdev) out->output_type = OMAP_DISPLAY_TYPE_SDI; out->name = "sdi.0"; out->dispc_channel = OMAP_DSS_CHANNEL_LCD; + /* We have SDI only on OMAP3, where it's on port 1 */ + out->port_num = 1; out->ops.sdi = &sdi_ops; out->owner = THIS_MODULE; -- 2.2.1