diff mbox

[2/4] ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock

Message ID 1419997154-860-2-git-send-email-b50113@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Zidan Wang Dec. 31, 2014, 3:39 a.m. UTC 
wm8960 codec driver missing configure its bit clock and frame clock, so add
support for it. It will calculate a appropriate frequency dividing ratio
according to the system clock, bit clock and frame clock, then set the
corresponding registers.

Signed-off-by: Zidan Wang <b50113@freescale.com>
---
 sound/soc/codecs/wm8960.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

Comments

Charles Keepax Jan. 6, 2015, 1:32 p.m. UTC | #1 
On Wed, Dec 31, 2014 at 11:39:12AM +0800, Zidan Wang wrote:
> wm8960 codec driver missing configure its bit clock and frame clock, so add
> support for it. It will calculate a appropriate frequency dividing ratio
> according to the system clock, bit clock and frame clock, then set the
> corresponding registers.
> 
> Signed-off-by: Zidan Wang <b50113@freescale.com>
> ---
>  sound/soc/codecs/wm8960.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 108 insertions(+)
> 
> diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
> index 1a5f47b..86a5489 100644
> --- a/sound/soc/codecs/wm8960.c
> +++ b/sound/soc/codecs/wm8960.c
> @@ -127,6 +127,8 @@ struct wm8960_priv {
>  	struct snd_soc_dapm_widget *out3;
>  	bool deemph;
>  	int playback_fs;
> +	int bclk;
> +	int sysclk;
>  	struct wm8960_data pdata;
>  };
>  
> @@ -563,6 +565,79 @@ static struct {
>  	{  8000, 5 },
>  };
>  
> +/* Multiply 256 for internal 256 div */
> +static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
> +
> +/* Multiply 10 to eliminate decimials */
> +static const int bclk_divs[] = {
> +	10, 15, 20, 30, 40, 55, 60, 80, 110,
> +	120, 160, 220, 240, 320, 320, 320
> +};
> +
> +static void wm8960_configure_clocking(struct snd_soc_codec *codec,
> +		int stream, int lrclk)
> +{
> +	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
> +	u16 iface1 = snd_soc_read(codec, WM8960_IFACE1);
> +	u16 iface2 = snd_soc_read(codec, WM8960_IFACE2);
> +	int i, j;
> +
> +	if (!(iface1 & (1<<6))) {
> +		dev_dbg(codec->dev,
> +			"Codec is slave mode, no need to configure clock\n");
> +		return;
> +	}
> +
> +	if (!wm8960->sysclk) {
> +		dev_dbg(codec->dev, "No SYSCLK configured\n");
> +		return;
> +	}
> +
> +	if (!wm8960->bclk || !lrclk) {
> +		dev_dbg(codec->dev, "No audio clocks configured\n");
> +		return;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) {
> +		if (wm8960->sysclk == lrclk * dac_divs[i]) {
> +			for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) {
> +				if (wm8960->sysclk ==  wm8960->bclk *
> +						bclk_divs[j] / 10) {
> +					/* configure frame clock */
> +					if (iface2 & (1<<6))
> +						/* If ADCLRC configure as GPIO
> +						 * pin, DACLRC pin is used as
> +						 * a frame clock for ADCs and
> +						 * DACs */
> +						snd_soc_update_bits(codec,
> +								WM8960_CLOCK1,
> +								0x7 << 3,
> +								i << 3);

The indentation is getting pretty horrific here can we do some
things to ease that a little. You could flip the polarity of the
two if statements and use continues instead for example that
would help a lot.

Thanks,
Charles

> +					else if (SNDRV_PCM_STREAM_PLAYBACK
> +								== stream)
> +						snd_soc_update_bits(codec,
> +								WM8960_CLOCK1,
> +								0x7 << 3,
> +								i << 3);
> +					else if (SNDRV_PCM_STREAM_CAPTURE
> +								== stream)
> +						snd_soc_update_bits(codec,
> +								WM8960_CLOCK1,
> +								0x7 << 6,
> +								i << 6);
> +
> +					/* configure bit clock */
> +					snd_soc_update_bits(codec,
> +							WM8960_CLOCK2, 0xf, j);
> +					return;
> +				}
> +			}
> +		}
> +	}
> +
> +	dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk);
> +}
> +
diff mbox

Patch

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 1a5f47b..86a5489 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -127,6 +127,8 @@  struct wm8960_priv {
 	struct snd_soc_dapm_widget *out3;
 	bool deemph;
 	int playback_fs;
+	int bclk;
+	int sysclk;
 	struct wm8960_data pdata;
 };
 
@@ -563,6 +565,79 @@  static struct {
 	{  8000, 5 },
 };
 
+/* Multiply 256 for internal 256 div */
+static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
+
+/* Multiply 10 to eliminate decimials */
+static const int bclk_divs[] = {
+	10, 15, 20, 30, 40, 55, 60, 80, 110,
+	120, 160, 220, 240, 320, 320, 320
+};
+
+static void wm8960_configure_clocking(struct snd_soc_codec *codec,
+		int stream, int lrclk)
+{
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+	u16 iface1 = snd_soc_read(codec, WM8960_IFACE1);
+	u16 iface2 = snd_soc_read(codec, WM8960_IFACE2);
+	int i, j;
+
+	if (!(iface1 & (1<<6))) {
+		dev_dbg(codec->dev,
+			"Codec is slave mode, no need to configure clock\n");
+		return;
+	}
+
+	if (!wm8960->sysclk) {
+		dev_dbg(codec->dev, "No SYSCLK configured\n");
+		return;
+	}
+
+	if (!wm8960->bclk || !lrclk) {
+		dev_dbg(codec->dev, "No audio clocks configured\n");
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) {
+		if (wm8960->sysclk == lrclk * dac_divs[i]) {
+			for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) {
+				if (wm8960->sysclk ==  wm8960->bclk *
+						bclk_divs[j] / 10) {
+					/* configure frame clock */
+					if (iface2 & (1<<6))
+						/* If ADCLRC configure as GPIO
+						 * pin, DACLRC pin is used as
+						 * a frame clock for ADCs and
+						 * DACs */
+						snd_soc_update_bits(codec,
+								WM8960_CLOCK1,
+								0x7 << 3,
+								i << 3);
+					else if (SNDRV_PCM_STREAM_PLAYBACK
+								== stream)
+						snd_soc_update_bits(codec,
+								WM8960_CLOCK1,
+								0x7 << 3,
+								i << 3);
+					else if (SNDRV_PCM_STREAM_CAPTURE
+								== stream)
+						snd_soc_update_bits(codec,
+								WM8960_CLOCK1,
+								0x7 << 6,
+								i << 6);
+
+					/* configure bit clock */
+					snd_soc_update_bits(codec,
+							WM8960_CLOCK2, 0xf, j);
+					return;
+				}
+			}
+		}
+	}
+
+	dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk);
+}
+
 static int wm8960_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params,
 			    struct snd_soc_dai *dai)
@@ -572,6 +647,10 @@  static int wm8960_hw_params(struct snd_pcm_substream *substream,
 	u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3;
 	int i;
 
+	wm8960->bclk = snd_soc_params_to_bclk(params);
+	if (params_channels(params) == 1)
+		wm8960->bclk *= 2;
+
 	/* bit size */
 	switch (params_width(params)) {
 	case 16:
@@ -602,6 +681,10 @@  static int wm8960_hw_params(struct snd_pcm_substream *substream,
 
 	/* set iface */
 	snd_soc_write(codec, WM8960_IFACE1, iface);
+
+	wm8960_configure_clocking(codec, substream->stream,
+			params_rate(params));
+
 	return 0;
 }
 
@@ -943,6 +1026,30 @@  static int wm8960_set_bias_level(struct snd_soc_codec *codec,
 	return wm8960->set_bias_level(codec, level);
 }
 
+static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
+					unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+
+	switch (clk_id) {
+	case WM8960_SYSCLK_MCLK:
+		snd_soc_update_bits(codec, WM8960_CLOCK1,
+					0x1, WM8960_SYSCLK_MCLK);
+		break;
+	case WM8960_SYSCLK_PLL:
+		snd_soc_update_bits(codec, WM8960_CLOCK1,
+					0x1, WM8960_SYSCLK_PLL);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8960->sysclk = freq;
+
+	return 0;
+}
+
 #define WM8960_RATES SNDRV_PCM_RATE_8000_48000
 
 #define WM8960_FORMATS \
@@ -955,6 +1062,7 @@  static const struct snd_soc_dai_ops wm8960_dai_ops = {
 	.set_fmt = wm8960_set_dai_fmt,
 	.set_clkdiv = wm8960_set_dai_clkdiv,
 	.set_pll = wm8960_set_dai_pll,
+	.set_sysclk = wm8960_set_dai_sysclk,
 };
 
 static struct snd_soc_dai_driver wm8960_dai = {