[v2,2/8] ARM: digicolor: add low level debug support
diff mbox

Message ID dcce7ae51a147095ee23c034076f462b7b02c02b.1420744369.git.baruch@tkos.co.il
State New, archived
Headers show

Commit Message

Baruch Siach Jan. 8, 2015, 7:39 p.m. UTC
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 arch/arm/Kconfig.debug             | 12 ++++++++++--
 arch/arm/include/debug/digicolor.S | 35 +++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/include/debug/digicolor.S

Patch
diff mbox

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5ddd4906f7a7..7ccab0629dd2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -241,6 +241,13 @@  choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port in the DC21285 (Footbridge).
 
+	config DEBUG_DIGICOLOR_UA0
+		bool "Kernel low-level debugging messages via Digicolor UA0"
+		depends on ARCH_DIGICOLOR
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the UA0 serial port in the CX92755.
+
 	config DEBUG_FOOTBRIDGE_COM1
 		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 		depends on FOOTBRIDGE
@@ -1204,6 +1211,7 @@  config DEBUG_LL_INCLUDE
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
@@ -1320,7 +1328,7 @@  config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
+		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1398,7 +1406,7 @@  config DEBUG_UART_VIRT
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
+		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/digicolor.S b/arch/arm/include/debug/digicolor.S
new file mode 100644
index 000000000000..c9517150766a
--- /dev/null
+++ b/arch/arm/include/debug/digicolor.S
@@ -0,0 +1,35 @@ 
+/*
+ * Debugging macro include header for Conexant Digicolor USART
+ *
+ * Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#define UA0_STATUS	0x0742
+#define UA0_EMI_REC	0x0744
+
+#define UA0_STATUS_TX_READY	0x40
+
+#ifdef CONFIG_DEBUG_UART_PHYS
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+#endif
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UA0_EMI_REC]
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+	.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #UA0_STATUS]
+		tst	\rd, #UA0_STATUS_TX_READY
+		beq	1001b
+		.endm