diff mbox

[v2,4/9] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes

Message ID 1420798676-22856-5-git-send-email-wens@csie.org (mailing list archive)
State Changes Requested
Delegated to: Eduardo Valentin
Headers show

Commit Message

Chen-Yu Tsai Jan. 9, 2015, 10:17 a.m. UTC
This patch adds the regulator nodes for the axp209 by including
the axp209 dtsi. As the inputs of these regulators are from the
axp209's PS output, which is basically just a mux over the 2
inputs, it is considered to be unregulated. Thus we do not provide
input supply properties for them.

The regulator names and constraints are based on the board
schematics and the SoC datasheet.

DCDC2 is used as the cpu power supply. This patch also references
it from the cpu node.

Also get rid of axp209 properties already set in axp209.dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

changes since v1:

    - Use preprocessor include for axp209.dtsi
    - Remove incorrectly squashed axp209.dtsi patch

---
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 35 +++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 18fc5db9c976..ec1fc2c8b3e3 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -88,13 +88,9 @@ 
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
 				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
 			};
 		};
 
@@ -145,3 +141,34 @@ 
 		status = "okay";
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};