[1/2] i2c: dt binding documentation for the Digicolor I2C controller
diff mbox

Message ID 7da767503ac6085c10fbd1953ffd36621b8bf0c5.1424092804.git.baruch@tkos.co.il
State New, archived
Headers show

Commit Message

Baruch Siach Feb. 16, 2015, 1:20 p.m. UTC
The CX92755 is an SoC in the Conexant Digicolor series. This devicetree binding
document describes the I2C controller on the CX92755 SoC, that is also shared
by some other SoCs in the Digicolor series.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 .../devicetree/bindings/i2c/i2c-digicolor.txt      | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-digicolor.txt

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
new file mode 100644
index 000000000000..457a098d4f7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
@@ -0,0 +1,25 @@ 
+Conexant Digicolor I2C controller
+
+Required properties:
+ - compatible: must be "cnxt,cx92755-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+  absence of this property the default value is used (100 kHz).
+
+Example:
+
+	i2c: i2c@f0000120 {
+		compatible = "cnxt,cx92755-i2c";
+		reg = <0xf0000120 0x10>;
+		interrupts = <28>;
+		clocks = <&main_clk>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};