@@ -43,6 +43,7 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_eh.h>
#include <linux/cciss_ioctl.h>
#include <linux/string.h>
#include <linux/bitmap.h>
@@ -268,16 +269,49 @@ static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
return (struct ctlr_info *) *priv;
}
+/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
+static void decode_sense_data(const u8 *sense_data, int sense_data_len,
+ int *sense_key, int *asc, int *ascq)
+{
+ struct scsi_sense_hdr sshdr;
+ bool rc;
+
+ *sense_key = -1;
+ *asc = -1;
+ *ascq = -1;
+
+ if (sense_data_len < 1)
+ return;
+
+ rc = scsi_normalize_sense(sense_data, sense_data_len, &sshdr);
+ if (rc) {
+ *sense_key = sshdr.sense_key;
+ *asc = sshdr.asc;
+ *ascq = sshdr.ascq;
+ }
+}
+
static int check_for_unit_attention(struct ctlr_info *h,
struct CommandList *c)
{
- if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
+ int sense_key, asc, ascq;
+ int sense_len;
+
+ if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
+ sense_len = sizeof(c->err_info->SenseInfo);
+ else
+ sense_len = c->err_info->SenseLen;
+
+ decode_sense_data(c->err_info->SenseInfo, sense_len,
+ &sense_key, &asc, &ascq);
+ if (sense_key != UNIT_ATTENTION || asc == -1)
return 0;
- switch (c->err_info->SenseInfo[12]) {
+ switch (asc) {
case STATE_CHANGED:
- dev_warn(&h->pdev->dev, HPSA "%d: a state change "
- "detected, command retried\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ HPSA "%d: a state change detected, command retried\n",
+ h->ctlr);
break;
case LUN_FAILED:
dev_warn(&h->pdev->dev,
@@ -1890,6 +1924,34 @@ retry_cmd:
queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
}
+/* Returns 0 on success, < 0 otherwise. */
+static int hpsa_evaluate_tmf_status(struct ctlr_info *h,
+ struct CommandList *cp)
+{
+ u8 tmf_status = cp->err_info->ScsiStatus;
+
+ switch (tmf_status) {
+ case CISS_TMF_COMPLETE:
+ /*
+ * CISS_TMF_COMPLETE never happens, instead,
+ * ei->CommandStatus == 0 for this case.
+ */
+ case CISS_TMF_SUCCESS:
+ return 0;
+ case CISS_TMF_INVALID_FRAME:
+ case CISS_TMF_NOT_SUPPORTED:
+ case CISS_TMF_FAILED:
+ case CISS_TMF_WRONG_LUN:
+ case CISS_TMF_OVERLAPPED_TAG:
+ break;
+ default:
+ dev_warn(&h->pdev->dev, "Unknown TMF status: 0x%02x\n",
+ tmf_status);
+ break;
+ }
+ return -tmf_status;
+}
+
static void complete_scsi_command(struct CommandList *cp)
{
struct scsi_cmnd *cmd;
@@ -1897,9 +1959,9 @@ static void complete_scsi_command(struct CommandList *cp)
struct ErrorInfo *ei;
struct hpsa_scsi_dev_t *dev;
- unsigned char sense_key;
- unsigned char asc; /* additional sense code */
- unsigned char ascq; /* additional sense code qualifier */
+ int sense_key;
+ int asc; /* additional sense code */
+ int ascq; /* additional sense code qualifier */
unsigned long sense_data_size;
ei = cp->err_info;
@@ -1934,8 +1996,6 @@ static void complete_scsi_command(struct CommandList *cp)
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
- cmd->result |= ei->ScsiStatus;
-
scsi_set_resid(cmd, ei->ResidualCnt);
if (ei->CommandStatus == 0) {
if (cp->cmd_type == CMD_IOACCEL1)
@@ -1945,16 +2005,6 @@ static void complete_scsi_command(struct CommandList *cp)
return;
}
- /* copy the sense data */
- if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
- sense_data_size = SCSI_SENSE_BUFFERSIZE;
- else
- sense_data_size = sizeof(ei->SenseInfo);
- if (ei->SenseLen < sense_data_size)
- sense_data_size = ei->SenseLen;
-
- memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
-
/* For I/O accelerator commands, copy over some fields to the normal
* CISS header used below for error handling.
*/
@@ -1986,14 +2036,18 @@ static void complete_scsi_command(struct CommandList *cp)
switch (ei->CommandStatus) {
case CMD_TARGET_STATUS:
- if (ei->ScsiStatus) {
- /* Get sense key */
- sense_key = 0xf & ei->SenseInfo[2];
- /* Get additional sense code */
- asc = ei->SenseInfo[12];
- /* Get addition sense code qualifier */
- ascq = ei->SenseInfo[13];
- }
+ cmd->result |= ei->ScsiStatus;
+ /* copy the sense data */
+ if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
+ sense_data_size = SCSI_SENSE_BUFFERSIZE;
+ else
+ sense_data_size = sizeof(ei->SenseInfo);
+ if (ei->SenseLen < sense_data_size)
+ sense_data_size = ei->SenseLen;
+ memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
+ if (ei->ScsiStatus)
+ decode_sense_data(ei->SenseInfo, sense_data_size,
+ &sense_key, &asc, &ascq);
if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
if (sense_key == ABORTED_COMMAND) {
cmd->result |= DID_SOFT_ERROR << 16;
@@ -2088,6 +2142,10 @@ static void complete_scsi_command(struct CommandList *cp)
cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "Command unabortable\n");
break;
+ case CMD_TMF_STATUS:
+ if (hpsa_evaluate_tmf_status(h, cp)) /* TMF failed? */
+ cmd->result = DID_ERROR << 16;
+ break;
case CMD_IOACCEL_DISABLED:
/* This only handles the direct pass-through case since RAID
* offload is handled above. Just attempt a retry.
@@ -2238,16 +2296,22 @@ static void hpsa_scsi_interpret_error(struct ctlr_info *h,
{
const struct ErrorInfo *ei = cp->err_info;
struct device *d = &cp->h->pdev->dev;
- const u8 *sd = ei->SenseInfo;
+ int sense_key, asc, ascq, sense_len;
switch (ei->CommandStatus) {
case CMD_TARGET_STATUS:
+ if (ei->SenseLen > sizeof(ei->SenseInfo))
+ sense_len = sizeof(ei->SenseInfo);
+ else
+ sense_len = ei->SenseLen;
+ decode_sense_data(ei->SenseInfo, sense_len,
+ &sense_key, &asc, &ascq);
hpsa_print_cmd(h, "SCSI status", cp);
if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION)
- dev_warn(d, "SCSI Status = 02, Sense key = %02x, ASC = %02x, ASCQ = %02x\n",
- sd[2] & 0x0f, sd[12], sd[13]);
+ dev_warn(d, "SCSI Status = 02, Sense key = 0x%02x, ASC = 0x%02x, ASCQ = 0x%02x\n",
+ sense_key, asc, ascq);
else
- dev_warn(d, "SCSI Status = %02x\n", ei->ScsiStatus);
+ dev_warn(d, "SCSI Status = 0x%02x\n", ei->ScsiStatus);
if (ei->ScsiStatus == 0)
dev_warn(d, "SCSI status is abnormally zero. "
"(probably indicates selection timeout "
@@ -2792,7 +2856,8 @@ static int hpsa_volume_offline(struct ctlr_info *h,
unsigned char scsi3addr[])
{
struct CommandList *c;
- unsigned char *sense, sense_key, asc, ascq;
+ unsigned char *sense;
+ int sense_key, asc, ascq, sense_len;
int rc, ldstat = 0;
u16 cmd_status;
u8 scsi_status;
@@ -2810,9 +2875,11 @@ static int hpsa_volume_offline(struct ctlr_info *h,
return 0;
}
sense = c->err_info->SenseInfo;
- sense_key = sense[2];
- asc = sense[12];
- ascq = sense[13];
+ if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
+ sense_len = sizeof(c->err_info->SenseInfo);
+ else
+ sense_len = c->err_info->SenseLen;
+ decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
cmd_status = c->err_info->CommandStatus;
scsi_status = c->err_info->ScsiStatus;
cmd_free(h, c);
@@ -2888,6 +2955,9 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h,
case CMD_ABORT_FAILED:
rc = 1;
break;
+ case CMD_TMF_STATUS:
+ rc = hpsa_evaluate_tmf_status(h, c);
+ break;
default:
rc = 0;
break;
@@ -4695,6 +4765,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
switch (ei->CommandStatus) {
case CMD_SUCCESS:
break;
+ case CMD_TMF_STATUS:
+ rc = hpsa_evaluate_tmf_status(h, c);
+ break;
case CMD_UNABORTABLE: /* Very common, don't make noise. */
rc = -1;
break;
@@ -42,6 +42,7 @@
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
+#define CMD_TMF_STATUS 0x000D
#define CMD_IOACCEL_DISABLED 0x000E
#define CMD_CTLR_LOCKUP 0xffff
/* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec
@@ -49,6 +50,14 @@
* with when a controller lockup has been detected by the driver
*/
+/* TMF function status values */
+#define CISS_TMF_COMPLETE 0x00
+#define CISS_TMF_INVALID_FRAME 0x02
+#define CISS_TMF_NOT_SUPPORTED 0x04
+#define CISS_TMF_FAILED 0x05
+#define CISS_TMF_SUCCESS 0x08
+#define CISS_TMF_WRONG_LUN 0x09
+#define CISS_TMF_OVERLAPPED_TAG 0x0a
/* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29