| Message ID | 1426684197-22281-5-git-send-email-b.zolnierkie@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2015-03-18 14:09 GMT+01:00 Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>: > Add get_cpu_boot_addr() firmware operation and then > exynos_get_boot_addr() helper. > > This is a preparation for adding coupled cpuidle support > for Exynos3250 SoC. > > There should be no functional changes caused by this patch. > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Russell King <rmk+kernel@arm.linux.org.uk> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- > arch/arm/include/asm/firmware.h | 4 ++++ > arch/arm/mach-exynos/firmware.c | 17 +++++++++++++++++ > arch/arm/mach-exynos/platsmp.c | 25 +++++++++++++++++++++++++ > 3 files changed, 46 insertions(+) > > diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h > index 89aefe1..34c1d96 100644 > --- a/arch/arm/include/asm/firmware.h > +++ b/arch/arm/include/asm/firmware.h > @@ -34,6 +34,10 @@ struct firmware_ops { > */ > int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); > /* > + * Gets boot address of specified physical CPU > + */ > + int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr); > + /* > * Boots specified physical CPU > */ > int (*cpu_boot)(int cpu); > diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c > index f236877..c9e4481 100644 > --- a/arch/arm/mach-exynos/firmware.c > +++ b/arch/arm/mach-exynos/firmware.c > @@ -104,6 +104,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) > return 0; > } > > +static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) > +{ > + void __iomem *boot_reg; > + > + if (!sysram_ns_base_addr) > + return -ENODEV; > + > + boot_reg = sysram_ns_base_addr + 0x1c; > + > + if (soc_is_exynos4412()) > + boot_reg += 4 * cpu; > + > + *boot_addr = __raw_readl(boot_reg); > + return 0; > +} > + > static int exynos_cpu_suspend(unsigned long arg) > { > flush_cache_all(); > @@ -138,6 +154,7 @@ static int exynos_resume(void) > static const struct firmware_ops exynos_firmware_ops = { > .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL, > .set_cpu_boot_addr = exynos_set_cpu_boot_addr, > + .get_cpu_boot_addr = exynos_get_cpu_boot_addr, > .cpu_boot = exynos_cpu_boot, > .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL, > .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, > diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c > index b7cfcdc..449edd1 100644 > --- a/arch/arm/mach-exynos/platsmp.c > +++ b/arch/arm/mach-exynos/platsmp.c > @@ -272,6 +272,31 @@ fail: > return ret; > } > > +static int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr) > +{ > + int ret; > + > + /* > + * Try to get boot address using firmware first > + * and fall back to boot register if it fails. > + */ > + ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr); > + if (ret && ret != -ENOSYS) > + goto fail; The exynos_get_cpu_boot_addr() returns ENODEV. Do you really want to check for ENOSYS here? > + if (ret == -ENOSYS) { > + void __iomem *boot_reg = cpu_boot_reg(core_id); > + > + if (IS_ERR(boot_reg)) { > + ret = PTR_ERR(boot_reg); > + goto fail; > + } -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday, March 18, 2015 02:43:49 PM Krzysztof Kozlowski wrote: > 2015-03-18 14:09 GMT+01:00 Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>: > > Add get_cpu_boot_addr() firmware operation and then > > exynos_get_boot_addr() helper. > > > > This is a preparation for adding coupled cpuidle support > > for Exynos3250 SoC. > > > > There should be no functional changes caused by this patch. > > > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > > Cc: Russell King <rmk+kernel@arm.linux.org.uk> > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > > --- > > arch/arm/include/asm/firmware.h | 4 ++++ > > arch/arm/mach-exynos/firmware.c | 17 +++++++++++++++++ > > arch/arm/mach-exynos/platsmp.c | 25 +++++++++++++++++++++++++ > > 3 files changed, 46 insertions(+) > > > > diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h > > index 89aefe1..34c1d96 100644 > > --- a/arch/arm/include/asm/firmware.h > > +++ b/arch/arm/include/asm/firmware.h > > @@ -34,6 +34,10 @@ struct firmware_ops { > > */ > > int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); > > /* > > + * Gets boot address of specified physical CPU > > + */ > > + int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr); > > + /* > > * Boots specified physical CPU > > */ > > int (*cpu_boot)(int cpu); > > diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c > > index f236877..c9e4481 100644 > > --- a/arch/arm/mach-exynos/firmware.c > > +++ b/arch/arm/mach-exynos/firmware.c > > @@ -104,6 +104,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) > > return 0; > > } > > > > +static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) > > +{ > > + void __iomem *boot_reg; > > + > > + if (!sysram_ns_base_addr) > > + return -ENODEV; > > + > > + boot_reg = sysram_ns_base_addr + 0x1c; > > + > > + if (soc_is_exynos4412()) > > + boot_reg += 4 * cpu; > > + > > + *boot_addr = __raw_readl(boot_reg); > > + return 0; > > +} > > + > > static int exynos_cpu_suspend(unsigned long arg) > > { > > flush_cache_all(); > > @@ -138,6 +154,7 @@ static int exynos_resume(void) > > static const struct firmware_ops exynos_firmware_ops = { > > .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL, > > .set_cpu_boot_addr = exynos_set_cpu_boot_addr, > > + .get_cpu_boot_addr = exynos_get_cpu_boot_addr, > > .cpu_boot = exynos_cpu_boot, > > .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL, > > .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, > > diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c > > index b7cfcdc..449edd1 100644 > > --- a/arch/arm/mach-exynos/platsmp.c > > +++ b/arch/arm/mach-exynos/platsmp.c > > @@ -272,6 +272,31 @@ fail: > > return ret; > > } > > > > +static int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr) > > +{ > > + int ret; > > + > > + /* > > + * Try to get boot address using firmware first > > + * and fall back to boot register if it fails. > > + */ > > + ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr); > > + if (ret && ret != -ENOSYS) > > + goto fail; > > The exynos_get_cpu_boot_addr() returns ENODEV. Do you really want to > check for ENOSYS here? Yes. When secure firmware is not present on the board the call_firmware_op() itself returns -ENOSYS (exynos_get_cpu_boot_addr() is not called in this case) and it needs to be handled in a special way. > > + if (ret == -ENOSYS) { > > + void __iomem *boot_reg = cpu_boot_reg(core_id); > > + > > + if (IS_ERR(boot_reg)) { > > + ret = PTR_ERR(boot_reg); > > + goto fail; > > + } Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On ?ro, 2015-03-18 at 16:18 +0100, Bartlomiej Zolnierkiewicz wrote: > On Wednesday, March 18, 2015 02:43:49 PM Krzysztof Kozlowski wrote: > > 2015-03-18 14:09 GMT+01:00 Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>: > > > Add get_cpu_boot_addr() firmware operation and then > > > exynos_get_boot_addr() helper. > > > > > > This is a preparation for adding coupled cpuidle support > > > for Exynos3250 SoC. > > > > > > There should be no functional changes caused by this patch. > > > > > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > > > Cc: Russell King <rmk+kernel@arm.linux.org.uk> > > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > > > --- > > > arch/arm/include/asm/firmware.h | 4 ++++ > > > arch/arm/mach-exynos/firmware.c | 17 +++++++++++++++++ > > > arch/arm/mach-exynos/platsmp.c | 25 +++++++++++++++++++++++++ > > > 3 files changed, 46 insertions(+) > > > > > > diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h > > > index 89aefe1..34c1d96 100644 > > > --- a/arch/arm/include/asm/firmware.h > > > +++ b/arch/arm/include/asm/firmware.h > > > @@ -34,6 +34,10 @@ struct firmware_ops { > > > */ > > > int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); > > > /* > > > + * Gets boot address of specified physical CPU > > > + */ > > > + int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr); > > > + /* > > > * Boots specified physical CPU > > > */ > > > int (*cpu_boot)(int cpu); > > > diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c > > > index f236877..c9e4481 100644 > > > --- a/arch/arm/mach-exynos/firmware.c > > > +++ b/arch/arm/mach-exynos/firmware.c > > > @@ -104,6 +104,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) > > > return 0; > > > } > > > > > > +static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) > > > +{ > > > + void __iomem *boot_reg; > > > + > > > + if (!sysram_ns_base_addr) > > > + return -ENODEV; > > > + > > > + boot_reg = sysram_ns_base_addr + 0x1c; > > > + > > > + if (soc_is_exynos4412()) > > > + boot_reg += 4 * cpu; > > > + > > > + *boot_addr = __raw_readl(boot_reg); > > > + return 0; > > > +} > > > + > > > static int exynos_cpu_suspend(unsigned long arg) > > > { > > > flush_cache_all(); > > > @@ -138,6 +154,7 @@ static int exynos_resume(void) > > > static const struct firmware_ops exynos_firmware_ops = { > > > .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL, > > > .set_cpu_boot_addr = exynos_set_cpu_boot_addr, > > > + .get_cpu_boot_addr = exynos_get_cpu_boot_addr, > > > .cpu_boot = exynos_cpu_boot, > > > .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL, > > > .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, > > > diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c > > > index b7cfcdc..449edd1 100644 > > > --- a/arch/arm/mach-exynos/platsmp.c > > > +++ b/arch/arm/mach-exynos/platsmp.c > > > @@ -272,6 +272,31 @@ fail: > > > return ret; > > > } > > > > > > +static int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr) > > > +{ > > > + int ret; > > > + > > > + /* > > > + * Try to get boot address using firmware first > > > + * and fall back to boot register if it fails. > > > + */ > > > + ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr); > > > + if (ret && ret != -ENOSYS) > > > + goto fail; > > > > The exynos_get_cpu_boot_addr() returns ENODEV. Do you really want to > > check for ENOSYS here? > > Yes. When secure firmware is not present on the board the call_firmware_op() > itself returns -ENOSYS (exynos_get_cpu_boot_addr() is not called in this > case) and it needs to be handled in a special way. Right, my mistake. Rest looks good: Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h index 89aefe1..34c1d96 100644 --- a/arch/arm/include/asm/firmware.h +++ b/arch/arm/include/asm/firmware.h @@ -34,6 +34,10 @@ struct firmware_ops { */ int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); /* + * Gets boot address of specified physical CPU + */ + int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr); + /* * Boots specified physical CPU */ int (*cpu_boot)(int cpu); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index f236877..c9e4481 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -104,6 +104,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) return 0; } +static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) +{ + void __iomem *boot_reg; + + if (!sysram_ns_base_addr) + return -ENODEV; + + boot_reg = sysram_ns_base_addr + 0x1c; + + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; + + *boot_addr = __raw_readl(boot_reg); + return 0; +} + static int exynos_cpu_suspend(unsigned long arg) { flush_cache_all(); @@ -138,6 +154,7 @@ static int exynos_resume(void) static const struct firmware_ops exynos_firmware_ops = { .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL, .set_cpu_boot_addr = exynos_set_cpu_boot_addr, + .get_cpu_boot_addr = exynos_get_cpu_boot_addr, .cpu_boot = exynos_cpu_boot, .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL, .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index b7cfcdc..449edd1 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -272,6 +272,31 @@ fail: return ret; } +static int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr) +{ + int ret; + + /* + * Try to get boot address using firmware first + * and fall back to boot register if it fails. + */ + ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(core_id); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } + *boot_addr = __raw_readl(boot_reg); + ret = 0; + } +fail: + return ret; +} + static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout;
Add get_cpu_boot_addr() firmware operation and then exynos_get_boot_addr() helper. This is a preparation for adding coupled cpuidle support for Exynos3250 SoC. There should be no functional changes caused by this patch. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- arch/arm/include/asm/firmware.h | 4 ++++ arch/arm/mach-exynos/firmware.c | 17 +++++++++++++++++ arch/arm/mach-exynos/platsmp.c | 25 +++++++++++++++++++++++++ 3 files changed, 46 insertions(+)