diff mbox

[v4,2/4] ARM: EXYNOS: add code for setting/clearing boot flag

Message ID 1426694453-3242-3-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bartlomiej Zolnierkiewicz March 18, 2015, 4 p.m. UTC 
This code is needed for cpuidle (W-)AFTR mode support on Exynos3250.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/mach-exynos/common.h   |  6 ++++++
 arch/arm/mach-exynos/firmware.c | 25 +++++++++++++++++++++++++
 2 files changed, 31 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f70eca7..acd5b56 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -126,6 +126,12 @@  enum {
 
 void exynos_firmware_init(void);
 
+/* CPU BOOT mode flag for Exynos3250 SoC bootloader */
+#define C2_STATE	(1 << 3)
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
+
 extern u32 exynos_get_eint_wake_mask(void);
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 4791a3c..27b8ae3 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -206,3 +206,28 @@  void __init exynos_firmware_init(void)
 		outer_cache.configure = exynos_l2_configure;
 	}
 }
+
+#define REG_CPU_STATE_ADDR	(sysram_ns_base_addr + 0x28)
+#define BOOT_MODE_MASK		0x1f
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+
+	if (mode & BOOT_MODE_MASK)
+		tmp &= ~BOOT_MODE_MASK;
+
+	tmp |= mode;
+	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}
+
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp &= ~mode;
+	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}