diff mbox

xfstests: btrfs: test for orphan item cleanup

Message ID 55130547.6090907@suse.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jeff Mahoney March 25, 2015, 6:58 p.m. UTC
This test tests three conditions where orphan items need to be cleaned up:
1) Default subvolume is fs tree root (mkfs default)
2) Default subvolume has been set explicitly to another subvolume (set-default)
3) Looking up a subvolume during a traversal

In the kernel, these three cases use separate mechanisms to look up
the subvolumes. There was a bug in the kernel where case #2 wasn't getting
handled and so orphan items would never be cleaned up if the default
subvolume was explicitly set. This issue was fixed with the upstream commit:
btrfs: cleanup orphans while looking up default subvolume

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
---
 tests/btrfs/083     | 155 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/083.out |   5 ++
 tests/btrfs/group   |   1 +
 3 files changed, 161 insertions(+)
 create mode 100755 tests/btrfs/083
 create mode 100644 tests/btrfs/083.out

Comments

Filipe Manana March 27, 2015, 6:11 p.m. UTC | #1
On Wed, Mar 25, 2015 at 6:58 PM, Jeff Mahoney <jeffm@suse.com> wrote:
> This test tests three conditions where orphan items need to be cleaned up:
> 1) Default subvolume is fs tree root (mkfs default)
> 2) Default subvolume has been set explicitly to another subvolume (set-default)
> 3) Looking up a subvolume during a traversal
>
> In the kernel, these three cases use separate mechanisms to look up
> the subvolumes. There was a bug in the kernel where case #2 wasn't getting
> handled and so orphan items would never be cleaned up if the default
> subvolume was explicitly set. This issue was fixed with the upstream commit:
> btrfs: cleanup orphans while looking up default subvolume
>
> Signed-off-by: Jeff Mahoney <jeffm@suse.com>

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>

Verified it fails without the btrfs fix applied and it passes with
that fix applied.
Just a couple minor comments below.

> ---
>  tests/btrfs/083     | 155 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/083.out |   5 ++
>  tests/btrfs/group   |   1 +
>  3 files changed, 161 insertions(+)
>  create mode 100755 tests/btrfs/083
>  create mode 100644 tests/btrfs/083.out
>
> diff --git a/tests/btrfs/083 b/tests/btrfs/083
> new file mode 100755
> index 0000000..12416d9
> --- /dev/null
> +++ b/tests/btrfs/083
> @@ -0,0 +1,155 @@
> +#!/bin/bash
> +# FS QA Test No. btrfs/083
> +#
> +# Tests to ensure that orphan items are properly created and cleaned up
> +# on next mount.
> +#
> +# There are three cases where orphan items may be cleaned up:
> +# 1) Default subvolume is fs tree root (mkfs default)
> +# 2) Default subvolume is explicitly created subvolume
> +#    (i.e. btrfs subvol set-default)
> +# 3) Non-default subvolume lookup
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2015 SUSE.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1       # failure is the default!
> +
> +_cleanup()
> +{
> +    _cleanup_flakey
> +    rm -f $tmp.*
> +}
> +
> +trap "_cleanup ; exit \$status" 0 1 2 3 15
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/dmflakey
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_dm_flakey
> +_need_to_be_root
> +
> +rm -f $seqres.full
> +
> +has_orphan_item() {

The general style used in fstests is to put the curly brace in its own line:

has_orphan_item()
{
     ....
}

> +       INO=$1
> +       if btrfs-debug-tree $SCRATCH_DEV | \
> +               grep -q "key (ORPHAN ORPHAN_ITEM $INO)"; then
> +               return 0
> +       fi

It would be nicer to have the test skipped with a useful message if
btrfs-debug-tree is not available instead of failing.
So like the test btrfs/012 does for btrfs-convert for example, would be like:

BTRFS_DEBUG_TREE_PROG="`set_prog_path btrfs-debug-tree`"
_require_command "$BTRFS_DEBUG_TREE_PROG" btrfs-debug-tree


> +       return 1
> +}
> +
> +test_orphan() {
> +       PRECMD=$1
> +       SUB=0
> +
> +       _scratch_mkfs >> $seqres.full 2>&1
> +       _init_flakey
> +
> +       _mount_flakey
> +
> +       $PRECMD
> +
> +       TESTPATH=$SCRATCH_MNT/testdir/testfile
> +       DIR=$(dirname $TESTPATH)
> +
> +       [ -d "$DIR" ] || mkdir -p $DIR
> +
> +       SIZE=$(( 1024 * 1024 ))
> +       run_check dd if=/dev/zero of=$TESTPATH bs=$SIZE count=1
> +
> +       INO=$(stat -c %i $TESTPATH)
> +
> +       # Orphan item won't be created if the file doesn't make it to disk
> +       sync
> +
> +       # Open and delete the file
> +       exec 27<$TESTPATH
> +       rm -f $TESTPATH
> +
> +       # Ensure the unlink (and orphan item creation) hits the disk
> +       sync
> +
> +       # Turn off writes before closing so the orphan item will be left behind
> +       _load_flakey_table $FLAKEY_DROP_WRITES
> +
> +       # Close the file so we can umount
> +       exec 27>&-
> +
> +       # Orphan item should be on disk if operating correctly
> +       _unmount_flakey
> +       _load_flakey_table $FLAKEY_ALLOW_WRITES
> +       if ! has_orphan_item $INO; then
> +               echo "ERROR: No orphan item found after umount."
> +               return
> +       fi
> +       _mount_flakey
> +
> +       # If $DIR is a subvolume, this will cause a lookup and orphan cleanup
> +       (cd $DIR; true)
> +
> +       # Orphan item will be cleaned up during mount but won't be on
> +       # disk until there's a sync.
> +       sync
> +
> +       _unmount_flakey
> +       if has_orphan_item $INO; then
> +               echo "ERROR: Orphan item found after successful mount/sync."
> +       fi
> +       _cleanup_flakey
> +}
> +
> +new_subvolume() {
> +       _run_btrfs_util_prog subvol create $SCRATCH_MNT/testdir
> +}
> +
> +new_default() {
> +       new_subvolume
> +       SUB=$(btrfs subvol list $SCRATCH_MNT |awk '{print $2}')
> +       _run_btrfs_util_prog subvol set-default $SUB $SCRATCH_MNT
> +
> +       _unmount_flakey
> +       _mount_flakey
> +}
> +
> +echo "Testing with fs root as default subvolume"
> +test_orphan true
> +
> +echo "Testing with explicit default subvolume"
> +test_orphan new_default
> +
> +echo "Testing with orphan on non-default subvolume"
> +test_orphan new_subvolume
> +
> +echo "Silence is golden"

Not needed because the test already echoes 3 messages before.

> +status=0
> +exit
> diff --git a/tests/btrfs/083.out b/tests/btrfs/083.out
> new file mode 100644
> index 0000000..c3c99f1
> --- /dev/null
> +++ b/tests/btrfs/083.out
> @@ -0,0 +1,5 @@
> +QA output created by 083
> +Testing with fs root as default subvolume
> +Testing with explicit default subvolume
> +Testing with orphan on non-default subvolume
> +Silence is golden
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index fd2fa76..c48fc0c 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -85,3 +85,4 @@
>  080 auto snapshot
>  081 auto quick clone
>  082 auto quick remount
> +083 auto quick metadata subvol
> --
> 1.8.5.2
>
>
> --
> Jeff Mahoney
> SUSE Labs
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/tests/btrfs/083 b/tests/btrfs/083
new file mode 100755
index 0000000..12416d9
--- /dev/null
+++ b/tests/btrfs/083
@@ -0,0 +1,155 @@ 
+#!/bin/bash
+# FS QA Test No. btrfs/083
+#
+# Tests to ensure that orphan items are properly created and cleaned up
+# on next mount.
+#
+# There are three cases where orphan items may be cleaned up:
+# 1) Default subvolume is fs tree root (mkfs default)
+# 2) Default subvolume is explicitly created subvolume
+#    (i.e. btrfs subvol set-default)
+# 3) Non-default subvolume lookup
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 SUSE.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+
+_cleanup()
+{
+    _cleanup_flakey
+    rm -f $tmp.*
+}
+
+trap "_cleanup ; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmflakey
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_dm_flakey
+_need_to_be_root
+
+rm -f $seqres.full
+
+has_orphan_item() {
+	INO=$1
+	if btrfs-debug-tree $SCRATCH_DEV | \
+		grep -q "key (ORPHAN ORPHAN_ITEM $INO)"; then
+		return 0
+	fi
+	return 1
+}
+
+test_orphan() {
+	PRECMD=$1
+	SUB=0
+
+	_scratch_mkfs >> $seqres.full 2>&1
+	_init_flakey
+
+	_mount_flakey
+
+	$PRECMD
+
+	TESTPATH=$SCRATCH_MNT/testdir/testfile
+	DIR=$(dirname $TESTPATH)
+
+	[ -d "$DIR" ] || mkdir -p $DIR
+
+	SIZE=$(( 1024 * 1024 ))
+	run_check dd if=/dev/zero of=$TESTPATH bs=$SIZE count=1
+
+	INO=$(stat -c %i $TESTPATH)
+
+	# Orphan item won't be created if the file doesn't make it to disk
+	sync
+
+	# Open and delete the file
+	exec 27<$TESTPATH
+	rm -f $TESTPATH
+
+	# Ensure the unlink (and orphan item creation) hits the disk
+	sync
+
+	# Turn off writes before closing so the orphan item will be left behind
+	_load_flakey_table $FLAKEY_DROP_WRITES
+
+	# Close the file so we can umount
+	exec 27>&-
+
+	# Orphan item should be on disk if operating correctly
+	_unmount_flakey
+	_load_flakey_table $FLAKEY_ALLOW_WRITES
+	if ! has_orphan_item $INO; then
+		echo "ERROR: No orphan item found after umount."
+		return
+	fi
+	_mount_flakey
+
+	# If $DIR is a subvolume, this will cause a lookup and orphan cleanup
+	(cd $DIR; true)
+
+	# Orphan item will be cleaned up during mount but won't be on
+	# disk until there's a sync.
+	sync
+
+	_unmount_flakey
+	if has_orphan_item $INO; then
+		echo "ERROR: Orphan item found after successful mount/sync."
+	fi
+	_cleanup_flakey
+}
+
+new_subvolume() {
+	_run_btrfs_util_prog subvol create $SCRATCH_MNT/testdir
+}
+
+new_default() {
+	new_subvolume
+	SUB=$(btrfs subvol list $SCRATCH_MNT |awk '{print $2}')
+	_run_btrfs_util_prog subvol set-default $SUB $SCRATCH_MNT
+
+	_unmount_flakey
+	_mount_flakey
+}
+
+echo "Testing with fs root as default subvolume"
+test_orphan true
+
+echo "Testing with explicit default subvolume"
+test_orphan new_default
+
+echo "Testing with orphan on non-default subvolume"
+test_orphan new_subvolume
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/btrfs/083.out b/tests/btrfs/083.out
new file mode 100644
index 0000000..c3c99f1
--- /dev/null
+++ b/tests/btrfs/083.out
@@ -0,0 +1,5 @@ 
+QA output created by 083
+Testing with fs root as default subvolume
+Testing with explicit default subvolume
+Testing with orphan on non-default subvolume
+Silence is golden
diff --git a/tests/btrfs/group b/tests/btrfs/group
index fd2fa76..c48fc0c 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -85,3 +85,4 @@ 
 080 auto snapshot
 081 auto quick clone
 082 auto quick remount
+083 auto quick metadata subvol